Makespace - User contributions [en]

Equipment/3D Printer/Training

2014-03-16T23:00:32Z

Cvoth: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

This is no longer handled here on the wiki.

For discussing and arranging slots, please use the mailing list thread [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion]. New training sessions will be announced on the Meetup group.

Notes:
* You can only be trained if you have RSVP'd to a Meetup session (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar
* Jennifer Herbert
* Matthew Ireland
* Harry Braviner
* Saar Drimer
* Robert Hoff
* Daniel Garden
* Armando Carlone
* Marcin Izo
* James Hutton (mandatory only)
* Anthony Wainman (mandatory only)
* Jia Wei Lim (mandatory only)
* Julius Schmidt (mandatory only)
* Hazel Jenkins (mandatory only)
* Benjamin Kidder (mandatory only)
* Joshua Keeler (mandatory only)
* Simon Birrell (mandatory only)
* John Simm (mandatory only)
* Theo Sanderson (mandatory only)
* Jon Aas (mandatory only)
* Stephen Jeapes (mandatory only)
* Anna Stoilova (mandatory only)
* Jim Dilks (mandatory only)
* Katia Dilks (mandatory only)
* Aleksandar Tomic (mandatory only)
* Gaye Saykok (mandatory only)
* Fergus Riche (mandatory only)
* David Barham (Mandatory only)
* Marco Aita (Mandatory only)
* Jason White (Mandatory only)
* Brian Starkey (Mandatory only)
* David Cox (Mandatory only)
* Matt Grimes (Mandatory only)
* Tim Regan (Mandatory only)
* Stuart Wilson (Mandatory only)
* Andy Spencer (Mandatory only)
* Ester Leighton (Mandatory only)
* Richard Fosh (Mandatory only)
* Peter Knight
* John Campbell
* Arun Rao
* Peter Mottram
* Marcin Zaba
* Jon Green
* Dave Potts
* Reid Potts
* Mark Roberts
* Piccardo Gheradi
* Edward Imhagwe
* Robert Hogg
* Michal Stefanow
* Charlie Stokes
* Leo Impett
* Patrick Wollner
* Patrick Baigent
* Kate Aston
* Shelagh Shepherd
* Damien Guihen
* Paul Edgington
* Wayne Keenan
* Liza Read
* David Horsnell
* Emyr James
* Francisco Cordobes Aguilar
* Nicola Powys
* Jia Wei Lim
* Sonya Sireau
* Andrew Gale
* Andre Powell
* Tom Myers
* Hidde-Jan Lemstra
* Mark Cheverton
* Robert Karpinski
* Alex Wortley
* Jason Holloway
* Alex Holloway

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Printer
* PC
* Materials

Checks for everyone to do
* Check in use, looks ok
*

Powering Up
* Turning on

Project walkthrough
* Package function, import file types, location, scale

Printer Operation
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Hazards
* --
* Ensure confident of process

Power Down
* Switch off
* Switch off PC

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/3D Printer/Training

2013-12-20T07:12:20Z

Cvoth: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

Please add your name to free slots in training sessions below.



Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar
* Jennifer Herbert
* Matthew Ireland
* Harry Braviner
* Saar Drimer
* Robert Hoff
* Daniel Garden
* Armando Carlone
* Marcin Izo
* James Hutton (mandatory only)
* Anthony Wainman (mandatory only)
* Jia Wei Lim (mandatory only)
* Julius Schmidt (mandatory only)
* Hazel Jenkins (mandatory only)
* Benjamin Kidder (mandatory only)
* Joshua Keeler (mandatory only)
* Simon Birrell (mandatory only)
* John Simm (mandatory only)
* Theo Sanderson (mandatory only)
* Jon Aas (mandatory only)
* Stephen Jeapes (mandatory only)
* Anna Stoilova (mandatory only)
* Jim Dilks (mandatory only)
* Katia Dilks (mandatory only)
* Aleksandar Tomic (mandatory only)
* Gaye Saykok (mandatory only)
* Fergus Riche (mandatory only)
* David Barham (Mandatory only)
* Marco Aita (Mandatory only)
* Jason White (Mandatory only)
* Brian Starkey (Mandatory only)
* David Cox (Mandatory only)
* Matt Grimes (Mandatory only)
* Tim Regan (Mandatory only)
* Stuart Wilson (Mandatory only)
* Andy Spencer (Mandatory only)
* Ester Leighton (Mandatory only)
* Richard Fosh (Mandatory only)
* Peter Knight
* John Campbell
* Arun Rao
* Peter Mottram
* Marcin Zaba
* Jon Green
* Dave Potts
* Reid Potts
* Mark Roberts
* Piccardo Gheradi
* Edward Imhagwe

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Printer
* PC
* Materials

Checks for everyone to do
* Check in use, looks ok
*

Powering Up
* Turning on

Project walkthrough
* Package function, import file types, location, scale

Printer Operation
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Hazards
* --
* Ensure confident of process

Power Down
* Switch off
* Switch off PC

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/3D Printer/Training

2013-12-05T22:53:25Z

Cvoth:

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

Please add your name to free slots in training sessions below.



Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar
* Jennifer Herbert
* Matthew Ireland
* Harry Braviner
* Saar Drimer
* Robert Hoff
* Daniel Garden
* Armando Carlone
* Marcin Izo
* James Hutton (mandatory only)
* Anthony Wainman (mandatory only)
* Jia Wei Lim (mandatory only)
* Julius Schmidt (mandatory only)
* Hazel Jenkins (mandatory only)
* Benjamin Kidder (mandatory only)
* Joshua Keeler (mandatory only)
* Simon Birrell (mandatory only)
* John Simm (mandatory only)
* Theo Sanderson (mandatory only)
* Jon Aas (mandatory only)
* Stephen Jeapes (mandatory only)
* Anna Stoilova (mandatory only)
* Jim Dilks (mandatory only)
* Katia Dilks (mandatory only)
* Aleksandar Tomic (mandatory only)
* Gaye Saykok (mandatory only)
* Fergus Riche (mandatory only)
* David Barham (Mandatory only)
* Marco Aita (Mandatory only)
* Jason White (Mandatory only)
* Brian Starkey (Mandatory only)
* David Cox (Mandatory only)
* Matt Grimes (Mandatory only)
* Tim Regan (Mandatory only)
* Stuart Wilson (Mandatory only)
* Andy Spencer (Mandatory only)
* Ester Leighton (Mandatory only)
* Richard Fosh (Mandatory only)

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Printer
* PC
* Materials

Checks for everyone to do
* Check in use, looks ok
*

Powering Up
* Turning on

Project walkthrough
* Package function, import file types, location, scale

Printer Operation
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Hazards
* --
* Ensure confident of process

Power Down
* Switch off
* Switch off PC

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Makespace

2013-11-26T23:52:22Z

Cvoth:

[[File:WIP+Makespace-dan.png|thumb|frameless|400px|Makespace]]
[http://makespace.org Makespace Homepage] / Wiki

== What is in Makespace? ==

* '''[[Equipment|Our Equipment]]'''
* [[Infrastructure]]
* [[Things and stuff]] --- locator for smaller items

== How does Makespace work? ==

The space is great for individuals wanting to experiment, startups or companies wanting access to prototyping equipment, companies in the business who can come and do training and provide services beyond Makespace, and groups that want space to meet. Anyone who could benefit from a shared space focused on making things.

At its core is a membership-based structure; the price of membership is £40/month inc vat for full membership for 24/7 RFID access.

It is a community run space; see:

* [http://makespace.org Makespace Main Website]
* [[Policies]] - ie how stuff works
* Non-exhaustive [[People|list of people]] currently involved. Founder members can put their details on our real world makespace [[members wall]]

== Getting involved ==

If you'd like to express interest in Makespace, keep up to date with how things are going, or find out about upcoming real-world meetings, please join our [http://www.meetup.com/makespace Meetup] group.

This is our main community list and you can see archive update posts on meetup, or [[Updates|here]].

We also have a mailing list at http://groups.google.com/group/cammakespace. You can email the list at cammakespace@googlegroups.com. Posts from new users may be held for moderation.

We are also present on IRC. Join #makespace on Freenode. You can also access this via your browser at http://webchat.freenode.net/?channels=makespace

And it doesn't just have to be electronic; here are some extra resources to help you spread the word in the real world:
* [http://files.meetup.com/1669256/a5poster.pdf A5 Flyer]
* [http://files.meetup.com/1669256/makespace-poster.pdf A4 Poster]
Please post them in offices, clubs, related shops, and anywhere you think will catch the eye of an interested person! (we'll make up to date ones soon!)

If you'd like to contribute to plans on the wiki, go for it. The [[Currently active and interesting]] page will show you where the action is at the moment.

Help make sure everyone who should know about Makespace knows about Makespace!

Various ways of how the Makespace community interacts are listed here: [[Communications]]

Consider becoming an Owner or Trainer.
A list of equipment owners can be found here [[OwnersPage]]

== Building Makespace Projects ==

The founder members are now working on '''how the space should be used''' and the '''projects to make it happen''':
* [[Space layout ideas]]
* [[Storage]]
* [[Kit wishlist]]
* [[Equipment status database]]
* [[Computers]]
* [[Makespace member guidelines]]
* [[How to do stuff for Makespace]]
* [[Layout]]

== Personal and Other Projects ==

* [[Projects|Makespace projects]]
* [[Arts and crafts]]
* [[Plants]]

We are also working on outreach activities as follows:
* [[Engineering Festival 2011]]
* [[Family Makers]]
* [[Student Society]]
* [[Arduino and Cake]]

== Social Meetings ==
There are always socials - and meetups and other things! The canonical means of arranging these is via Meetup: http://www.meetup.com/Makespace Check out [[Events policy|how to run an event in Makespace]].

== Formal Meetings ==
There are write-ups of planning and member meetings at [[Makespace/Meetings | Meetings]].

== Sponsorship and Donations! ==

Makespace is made possible by membership fees and sponsorship, and also support from Ideaspace. We gratefully receive any donations, however small, that can help with developing, running and improving Makespace for everyone.

Also, we accept donations-in-kind. Head over to [[DonationsWelcome]], where we're tracking the things we need and the things people have that we might need, and read our [[Donations Policy]] about how to donate things.

Thanks!

==Links==
[https://delicious.com/makespace Here] we keep our links and Refs for inspiration, suppliers, other hacker/makerspaces and the daily what. Do not hesitate to chip in.( u and p both = makespace]

Some information about other groups around the world that may be of interest can be found on the [[Links|Links page]].

Some projects may need external [[Service Suppliers]] for things we can't do in-house.

Makespace

2013-11-26T23:52:04Z

Cvoth:

[[File:WIP+Makespace-dan.png|thumb|frameless|400px|Makespace]]
[http://makespace.org Makespace Homepage] / Wiki

== What is in Makespace? ==

* '''[[Equipment|Our Equipment]]'''
* [[Infrastructure]]
* [[Things and stuff]] --- locator for smaller items

== How does Makespace work? ==

The space is great for individuals wanting to experiment, startups or companies wanting access to prototyping equipment, companies in the business who can come and do training and provide services beyond Makespace, and groups that want space to meet. Anyone who could benefit from a shared space focused on making things.

At its core is a membership-based structure; the price of membership is £40/month inc vat for full membership for 24/7 RFID access.

It is a community run space; see:

* [http://makespace.org Makespace Main Website]
* [[Policies]] - ie how stuff works
* Non-exhaustive [[People|list of people]] currently involved. Founder members can put their details on our real world makespace [[members wall]]

== Getting involved ==

If you'd like to express interest in Makespace, keep up to date with how things are going, or find out about upcoming real-world meetings, please join our [http://www.meetup.com/makespace Meetup] group.

This is our main community list and you can see archive update posts on meetup, or [[Updates|here]].

We also have a mailing list at http://groups.google.com/group/cammakespace. You can email the list at cammakespace@googlegroups.com. Posts from new users may be held for moderation.

We are also present on IRC. Join #makespace on Freenode. You can also access this via your browser at http://webchat.freenode.net/?channels=makespace

And it doesn't just have to be electronic; here are some extra resources to help you spread the word in the real world:
* [http://files.meetup.com/1669256/a5poster.pdf A5 Flyer]
* [http://files.meetup.com/1669256/makespace-poster.pdf A4 Poster]
Please post them in offices, clubs, related shops, and anywhere you think will catch the eye of an interested person! (we'll make up to date ones soon!)

If you'd like to contribute to plans on the wiki, go for it. The [[Currently active and interesting]] page will show you where the action is at the moment.

Help make sure everyone who should know about Makespace knows about Makespace!

Various ways of how the Makespace community interacts are listed here: [[Communications]]

Consider becoming an owner or Trainer.
A list of equipment owners can be found here [[OwnersPage]]

== Building Makespace Projects ==

The founder members are now working on '''how the space should be used''' and the '''projects to make it happen''':
* [[Space layout ideas]]
* [[Storage]]
* [[Kit wishlist]]
* [[Equipment status database]]
* [[Computers]]
* [[Makespace member guidelines]]
* [[How to do stuff for Makespace]]
* [[Layout]]

== Personal and Other Projects ==

* [[Projects|Makespace projects]]
* [[Arts and crafts]]
* [[Plants]]

We are also working on outreach activities as follows:
* [[Engineering Festival 2011]]
* [[Family Makers]]
* [[Student Society]]
* [[Arduino and Cake]]

== Social Meetings ==
There are always socials - and meetups and other things! The canonical means of arranging these is via Meetup: http://www.meetup.com/Makespace Check out [[Events policy|how to run an event in Makespace]].

== Formal Meetings ==
There are write-ups of planning and member meetings at [[Makespace/Meetings | Meetings]].

== Sponsorship and Donations! ==

Makespace is made possible by membership fees and sponsorship, and also support from Ideaspace. We gratefully receive any donations, however small, that can help with developing, running and improving Makespace for everyone.

Also, we accept donations-in-kind. Head over to [[DonationsWelcome]], where we're tracking the things we need and the things people have that we might need, and read our [[Donations Policy]] about how to donate things.

Thanks!

==Links==
[https://delicious.com/makespace Here] we keep our links and Refs for inspiration, suppliers, other hacker/makerspaces and the daily what. Do not hesitate to chip in.( u and p both = makespace]

Some information about other groups around the world that may be of interest can be found on the [[Links|Links page]].

Some projects may need external [[Service Suppliers]] for things we can't do in-house.

Makespace

2013-11-26T23:50:58Z

Cvoth:

[[File:WIP+Makespace-dan.png|thumb|frameless|400px|Makespace]]
[http://makespace.org Makespace Homepage] / Wiki

== What is in Makespace? ==

* '''[[Equipment|Our Equipment]]'''
* [[Infrastructure]]
* [[Things and stuff]] --- locator for smaller items

== How does Makespace work? ==

The space is great for individuals wanting to experiment, startups or companies wanting access to prototyping equipment, companies in the business who can come and do training and provide services beyond Makespace, and groups that want space to meet. Anyone who could benefit from a shared space focused on making things.

At its core is a membership-based structure; the price of membership is £40/month inc vat for full membership for 24/7 RFID access.

It is a community run space; see:

* [http://makespace.org Makespace Main Website]
* [[Policies]] - ie how stuff works
* Non-exhaustive [[People|list of people]] currently involved. Founder members can put their details on our real world makespace [[members wall]]

== Getting involved ==

If you'd like to express interest in Makespace, keep up to date with how things are going, or find out about upcoming real-world meetings, please join our [http://www.meetup.com/makespace Meetup] group.

This is our main community list and you can see archive update posts on meetup, or [[Updates|here]].

We also have a mailing list at http://groups.google.com/group/cammakespace. You can email the list at cammakespace@googlegroups.com. Posts from new users may be held for moderation.

We are also present on IRC. Join #makespace on Freenode. You can also access this via your browser at http://webchat.freenode.net/?channels=makespace

And it doesn't just have to be electronic; here are some extra resources to help you spread the word in the real world:
* [http://files.meetup.com/1669256/a5poster.pdf A5 Flyer]
* [http://files.meetup.com/1669256/makespace-poster.pdf A4 Poster]
Please post them in offices, clubs, related shops, and anywhere you think will catch the eye of an interested person! (we'll make up to date ones soon!)

If you'd like to contribute to plans on the wiki, go for it. The [[Currently active and interesting]] page will show you where the action is at the moment.

Help make sure everyone who should know about Makespace knows about Makespace!

Various ways of how the Makespace community interacts are listed here: [[Communications]]
Consider becoming an owner or Trainer.
A list of equipment owners can be found here [[OwnersPage]]

== Building Makespace Projects ==

The founder members are now working on '''how the space should be used''' and the '''projects to make it happen''':
* [[Space layout ideas]]
* [[Storage]]
* [[Kit wishlist]]
* [[Equipment status database]]
* [[Computers]]
* [[Makespace member guidelines]]
* [[How to do stuff for Makespace]]
* [[Layout]]

== Personal and Other Projects ==

* [[Projects|Makespace projects]]
* [[Arts and crafts]]
* [[Plants]]

We are also working on outreach activities as follows:
* [[Engineering Festival 2011]]
* [[Family Makers]]
* [[Student Society]]
* [[Arduino and Cake]]

== Social Meetings ==
There are always socials - and meetups and other things! The canonical means of arranging these is via Meetup: http://www.meetup.com/Makespace Check out [[Events policy|how to run an event in Makespace]].

== Formal Meetings ==
There are write-ups of planning and member meetings at [[Makespace/Meetings | Meetings]].

== Sponsorship and Donations! ==

Makespace is made possible by membership fees and sponsorship, and also support from Ideaspace. We gratefully receive any donations, however small, that can help with developing, running and improving Makespace for everyone.

Also, we accept donations-in-kind. Head over to [[DonationsWelcome]], where we're tracking the things we need and the things people have that we might need, and read our [[Donations Policy]] about how to donate things.

Thanks!

==Links==
[https://delicious.com/makespace Here] we keep our links and Refs for inspiration, suppliers, other hacker/makerspaces and the daily what. Do not hesitate to chip in.( u and p both = makespace]

Some information about other groups around the world that may be of interest can be found on the [[Links|Links page]].

Some projects may need external [[Service Suppliers]] for things we can't do in-house.

Equipment/3D Printer/Training

2013-11-26T23:34:55Z

Cvoth:

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

Please add your name to free slots in training sessions below.



Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar
* Jennifer Herbert
* Matthew Ireland
* Harry Braviner
* Saar Drimer
* Robert Hoff
* Daniel Garden
* Armando Carlone
* Marcin Izo
* James Hutton (mandatory only)
* Anthony Wainman (mandatory only)
* Jia Wei Lim (mandatory only)
* Julius Schmidt (mandatory only)
* Hazel Jenkins (mandatory only)
* Benjamin Kidder (mandatory only)
* Joshua Keeler (mandatory only)
* Simon Birrell (mandatory only)
* John Simm (mandatory only)
* Theo Sanderson (mandatory only)
* Jon Aas (mandatory only)
* Stephen Jeapes (mandatory only)
* Anna Stoilova (mandatory only)
* Jim Dilks (mandatory only)
* Katia Dilks (mandatory only)
* Aleksandar Tomic (mandatory only)
* Gaye Saykok (mandatory only)
* Fergus Riche (mandatory only)
* David Barham (Mandatory only)

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Printer
* PC
* Materials

Checks for everyone to do
* Check in use, looks ok
*

Powering Up
* Turning on

Project walkthrough
* Package function, import file types, location, scale

Printer Operation
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Hazards
* --
* Ensure confident of process

Power Down
* Switch off
* Switch off PC

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/3D Printer/Training

2013-10-20T21:56:49Z

Cvoth:

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

Please add your name to free slots in training sessions below.



Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar
* Jennifer Herbert
* Matthew Ireland
* Harry Braviner
* Saar Drimer
* Robert Hoff
* Daniel Garden
* Armando Carlone
* Marcin Izo
* James Hutton (mandatory only)
* Anthony Wainman (mandatory only)
* Jia Wei Lim (mandatory only)
* Julius Schmidt (mandatory only)
* Hazel Jenkins (mandatory only)
* Benjamin Kidder (mandatory only)
* Joshua Keeler (mandatory only)
* Simon Birrell (mandatory only)
* John Simm (mandatory only)
* Theo Sanderson (mandatory only)
* Jon Aas (mandatory only)
* Stephen Jeapes (mandatory only)
* Anna Stoilova (mandatory only)
* Jim Dilks (mandatory only)
* Katia Dilks (mandatory only)
* Aleksandar Tomic (mandatory only)
* Gaye Saykok (mandatory only)
* Fergus Riche (mandatory only)

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Printer
* PC
* Materials

Checks for everyone to do
* Check in use, looks ok
*

Powering Up
* Turning on

Project walkthrough
* Package function, import file types, location, scale

Printer Operation
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Hazards
* --
* Ensure confident of process

Power Down
* Switch off
* Switch off PC

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/3D Printer/Training

2013-10-13T13:05:56Z

Cvoth: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

Please add your name to free slots in training sessions below.



Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar
* Jennifer Herbert
* Matthew Ireland
* Harry Braviner
* Saar Drimer
* Robert Hoff
* Daniel Garden
* Armando Carlone
* Marcin Izo

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Printer
* PC
* Materials

Checks for everyone to do
* Check in use, looks ok
*

Powering Up
* Turning on

Project walkthrough
* Package function, import file types, location, scale

Printer Operation
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Hazards
* --
* Ensure confident of process

Power Down
* Switch off
* Switch off PC

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/3D Printer/Training

2013-10-06T00:47:28Z

Cvoth:

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

Please add your name to free slots in training sessions below.



Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar
* Jennifer Herbert
* Matthew Ireland
* Harry Braviner
* Saar Drimer
* Robert Hoff
* Daniel Garden
* Armando Carlone

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Printer
* PC
* Materials

Checks for everyone to do
* Check in use, looks ok
*

Powering Up
* Turning on

Project walkthrough
* Package function, import file types, location, scale

Printer Operation
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Hazards
* --
* Ensure confident of process

Power Down
* Switch off
* Switch off PC

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/3D Printer/Training

2013-08-15T20:03:55Z

Cvoth: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

Please add your name to free slots in training sessions below.



Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar
* Jennifer Herbert

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Printer
* PC
* Materials

Checks for everyone to do
* Check in use, looks ok
*

Powering Up
* Turning on

Project walkthrough
* Package function, import file types, location, scale

Printer Operation
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Hazards
* --
* Ensure confident of process

Power Down
* Switch off
* Switch off PC

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/3D Printer/Training

2013-08-15T18:56:14Z

Cvoth: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

Please add your name to free slots in training sessions below.



Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Printer
* PC
* Materials

Checks for everyone to do
* Check in use, looks ok
*

Powering Up
* Turning on

Project walkthrough
* Package function, import file types, location, scale

Printer Operation
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Hazards
* --
* Ensure confident of process

Power Down
* Switch off
* Switch off PC

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Member's Skills

2013-03-20T18:48:54Z

Cvoth:

People of makespace. Note that this list might not be comprehensive

<div class="memberslist">
{| style="border-spacing: 0px; width: 75%; height: 300px"
| {{MemberDetails|nickname=dadabit|wikiusername=dadabit|realname=gaye dadabit|imagefile=gayedadabit.jpg }}
| {{MemberDetails|nickname=srimech|wikiusername=JimM|realname=Jim MacArthur|imagefile=Jim3-scaled.jpeg }}
| {{MemberDetails|nickname=LaurieJ|wikiusername=Laura|realname=Laura James <br \>(Co-founder <br \>and director)|imagefile=LJ-square2.jpg}}
| {{MemberDetails|nickname=Brice|wikiusername=Brice|realname=Brice Fernandes|imagefile=Brice_stripes.jpg }}
| {{MemberDetails|nickname=rjw57|wikiusername=Rjw57|realname=Rich Wareham|imagefile=rjw57_profile.jpg }}
|-
| {{MemberDetails|nickname=benjymous|wikiusername=Benjymous|realname=Richard Munn|imagefile=benjymous.jpg }}
| {{MemberDetails|nickname=elsmorian|wikiusername=Elsmorian|realname=Chris Elsmore|imagefile=ElsmorianProfileSmall.jpg }}
| {{MemberDetails|nickname=Phil|wikiusername=Phil|realname=Phil Cowans|imagefile=Phil.jpg }}
| {{MemberDetails|nickname=Martin|wikiusername=Martin_de_S|realname=Martin de Selincourt|imagefile=Martin_de_S_pic.jpg }}
| {{MemberDetails|nickname=Kim|wikiusername=Kim SJ|realname=Kim Spence-Jones|imagefile=Kim_SJ_Photo_July_2012.jpg‎ }}
|-
| {{MemberDetails|nickname=Molarch|wikiusername=Molarch|realname=Jonathan Moller|imagefile=JMollerSM.jpg‎ }}
| {{MemberDetails|nickname=SimonS|wikiusername=SimonS|realname=Simon Stirley|imagefile=P1030133.JPG }}
| {{MemberDetails|nickname=JCGS|wikiusername=JCGS|realname=John Sturdy|imagefile=JCGS.jpg}}
| {{MemberDetails|nickname=heng|wikiusername=heng|realname=Henry Gomersall|imagefile=heng_photo.jpg}}
| {{MemberDetails|nickname=Ste5eu|wikiusername=Ste5eu|realname=Steve Upton|imagefile=ste5eu_ms_unionjack.jpg‎}}
|-
| {{MemberDetails|nickname=nickcadsoftuk|wikiusername=nickcadsoftuk|realname=Nicholas Johnson|imagefile=nickcadsoftuk_me_128px.jpg}}
| {{MemberDetails|nickname=Uwe|wikiusername=Uboro|realname=Uwe Borowski|imagefile=ub.jpg}}
| {{MemberDetails|nickname=Cvoth|wikiusername=Cvoth|realname=Chris Voth|imagefile=550719_10150969145629501_85666288_n.jpg}}

|}
</div>

= Skills =

If you have knowledge to share with others, or are looking for expertise, check out the [[SkillsKnowhow|skills exchange]].

User:Cvoth

2013-03-20T18:46:44Z

Cvoth:

File:550719 10150969145629501 85666288 n.jpg

2013-03-20T18:33:43Z

Cvoth: Chris Voth

Chris Voth

User:Cvoth

2013-03-20T18:30:34Z

Cvoth: Created page with "The is meant to be my page"

The is meant to be my page

User talk:Cvoth

2013-03-20T18:29:00Z

Cvoth: Created page with "I think this is meant to be my page on the wiki."

I think this is meant to be my page on the wiki.