Makespace - User contributions [en]

Equipment/Lathe/Training

2018-05-01T13:37:32Z

JonnyPW: /* Trained user list */

Equipment/WarcoMill/Training

2018-05-01T13:33:24Z

JonnyPW: /* Trained Users */

Equipment/Laser Cutter

2017-06-02T10:44:26Z

JonnyPW: /* Can I cut it? */

{{RedTool}}

[[Equipment|Equipment]] / Laser Cutter

[[File:Makespace-laser-cutter.JPG|thumb|460px|right|Our LS6090 PRO Laser Cutter]]

= Summary =

We have two LS 6090 PRO Laser Cutters. Each has a working area of 900mm by 600mm, and is powered by a 60w CO2 Water Cooled Laser Tube that can engrave and cut through materials such as wood, plastic, card, leather, fabrics, up to about 10-15mm thick (note, it can not cut metal). The laser cut is approximately 0.15mm wide, and a job can take a few seconds through to tens of minutes depending on material thickness and design complexity.

We have dedicated PCs running LaserCut 5.3 software to import, prepare and download jobs to the Laser Cutter. It can import various formats, with DXF being the most commonly used, so various software packages can be used to create your designs.

Here are some examples of laser jobs we've run (please add a photo of yours any time you do a job!)

<gallery>
File:Laser-cut-focus-tool.JPG
File:Laser-cut-front-panels.JPG
File:Laser-cut-lizards.JPG
File:Laser-cut-m-and-s.JPG
File:Laser-cut-model-building.JPG
File:Laser-cut-ply-m.JPG
File:Laser_output_-_makespace_arrow.JPG
File:Laser_box.jpg
File:Croc-small.jpg
File:LaserCutter_Jobs_1.jpg
File:LaserCutterGallery_20130328.jpg
File:LasercutSettlers.jpg
File:Wolfstock1.jpg
File:Mug-holder.jpg
File:2013-10-21 20.10.06.jpg
File:Indy jigster.png
</gallery>

= Using the Laser Cutter =

The laser cutter is a great way to easily produce accurate and complex 2D forms in various materials, and can be designed for with limited experience in various drawing or CAD applications. At the same time, it is an expensive tool with real risk of injury and fire, so is very important you know how to use it to avoid damaging yourself and the machine. '''You must only use the laser cutter if you have been trained, and if you are ever in any doubt about something, please ask for assistance.'''

== Owners ==

The Owners are those who have volunteered to be in charge of the laser cutter, organising maintenance, responding to technical issues and generally being a point of contact. The current Owners of the Laser Cutter are:

* [[User:Mat-C|Mat Cook]]
* [[User:DianaProbst|Diana Probst]]
* Owners who are a little less current, but may still be able to help:
** [[User:Simon|Simon Ford]]
** [[User:Barhamd|David Barham]]
** [[User:Nickcadsoftuk|Nick Johnson]]

== Trainers ==

The Trainers are those who have volunteered to teach others to use the laser cutter and to promote good working practice. The current Trainers for the Laser Cutter are:

* Brian Starkey
* [[User:stevancw|Stevan Wing]]
* [[User:Mat-C|Mat Cook]]
* [[User:robv|Rob Voisey]]
* Miguel Morin

* Currently slightly less frequent trainers are:
** Martin de Selincourt
** [[User:Simon|Simon Ford]]
** [[User:Barhamd|David Barham]]
** [[User:Nickcadsoftuk|Nick Johnson]]
** [[User:Tmonca|Toby Moncaster]]

If you have any questions, problems or concerns around the laser cutter, please use the forum page:
* [http://makespace.org/forum/viewtopic.php?f=19&t=45 Laser Cutter Log]

For the old mailing list thread see here:
* [https://groups.google.com/d/topic/cammakespace/Tmce2iKVzD8/discussion Log : Laser Cutter]

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>YOU CAN ONLY USE THE LASER CUTTER IF YOU HAVE BEEN TRAINED</b><br>
and have been added to the [[Equipment/Laser_Cutter/Training#Trained_Users|Trained Users]] list by one of the Owners
</div>

To get trained on the laser cutter and be added to the qualified user list, you will need to arrange for a training session with one of the Laser Cutter Owners.

If you'd like to arrange training, please see:
* [[Equipment/Laser_Cutter/Training|Laser Cutter Training]]

== Health and Safety ==

The laser cutter is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the laser cutter are:
* '''ONLY USE THE LASER CUTTER IF YOU ARE ON THE LIST OF TRAINED USERS'''
* '''NEVER LEAVE THE LASER CUTTER RUNNING UNATTENDED'''
* '''KNOW WHAT TO DO IF A FIRE BREAKS OUT'''
* '''NEVER CUT MATERIALS THAT YOU DON'T KNOW ARE SAFE'''

As a trained user, you should be very aware of the following risks and how to deal with them:

'''FIRE (under normal operation)''' - Cutting at the wrong speed or the wrong power can result in the material igniting
* You must watch the cutter at all times and be prepared to abort the job if problems occur
* Small flashes of flame that don't hang around for a fraction of a second are acceptable, but any more is rare and not acceptable
* If a fire does take, this is the process you should follow (from minor to major):
** Press "pause" (the same button you started the job with) - This will turn the laser off so no more heat enters, and assuming the flame goes out, you can press "start" for the job to continue where it left off
** Open the lid - With the job paused, you can open the lid to blow out the flame. Again, it is possible to re-close the lid and continue where you left off
** Move the material from under the laser head assuming safe to do so (so it doesn't damage the optics; alternatively send the laser to home/datum), and smother with a spare sheet of material or blow out
** Use the workshop CO2 extinguisher to extinguish the flame
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

'''FIRE (abnormal operation)''' - If the head gets stuck or something else goes wrong, ignition could happen much more suddenly or intensely
* You must watch the cutter at all times and be prepared to abort the job if problems occur
* If the head gets trapped (e.g. tomb-stoning of a piece, mechanical failure) or any other problem occurs that causes or could cause fire, this is the process you should follow:
** Hit the emergency stop
** Open the lid and move the material from under the laser head assuming safe to do so (so it doesn't damage the optics)
** Blow out, smother with a spare sheet of material, or use the CO2 extinguisher to extinguish the flame as appropriate
* Ensure a Maintainer looks at the machine before it is brought back in to action if it is not obvious what went wrong and all is ok
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

'''FUMES''' - The laser cutting process will release different smoke and fumes depending on the material.
* Never cut PVC or a material you are not sure is safe. When PVC is heated it releases chlorine gas, this mixes with the moisture in the air and the result is hydrochloric acid which is toxic to humans and corrosive to machines.
* Ensure the filter is on and the cutter lid stays closed for a while after a job to allow the fumes to clear.
* If you are feeling strange, think the fume build up is too much, or for any other reason you are unsure, stop the job.

'''TRAPPING''' - The head and bed of the cutter can be moved by the front panel menu or programs in the machines memory.
* Be careful when working inside the cutting area or with the lid open not to trap hands, hair, clothing or anything else.
* Always check the machine for unexpected items that may have fallen in before closing the lid.
* Do not attempt to climb into the machine!

'''LASER BURNS/LIGHT''' - A 60W laser can do real damage.
* The laser should be safe within the confines of the machine, and cut-off automatically when the lid is open (although this should not be relied upon). The top window is safe to look through during a job, but do not attempt to interfere with these windows or the laser or in any way invent some way to look at the laser.
* Do not tamper with the laser cutter, or any interlocks. All side panels of the laser should always be closed and locked whilst the machine is plugged in.
* Do not put metal in the laser cutter.

== Can I cut it? ==

If it's not on this list, the answer is "NO YOU CAN'T CUT IT AT MAKESPACE". Even if other people say it's ok. Bear in mind that we can't ventilate externally like other people can.

If it's something that isn't covered here, do ask on the forums and we'll look into it :)

*Woody things
** Wood: yes! (be careful of fire)
** Plywood: yes if it is "laser ply". Normal plywood has non-laser compatible glue
** MDF: no. Clogs up our filters and smells bad.
** LaserMDF: no. It produces perhaps 50% the gunk of MDF but still too much.
** Cork: yes, but it with a badly charred edge, and won't cut very deeply --- try cutting from the back of your sheet and using the cut to guide a craft knife / scalpel to make a neat cut through to the front.

*Plasticy things
** Acrylic / Perspex: yes!
** PVC/Vinyl: absolutely not. Produces chlorine.
** Silicone: we tried it with very limited success. A mm or two perhaps, anything else chars and doesn't cut.
** White Delrin/Acetal: yes with great care. Make sure filters running well. Don't open lid too quickly. Check for fumes and fire.
** Black Delrin/Acetal: no. contains carbon black which can be toxic.
** Teflon: no (it is toxic)
** Nylon: no (consult an owner)
** Polythene/polyethylene: no (consult an owner)
** Lexan/Polycarbonate: no (consult an owner)
** Polypropylene: yes just. You must clean the bed. It will cut up to about 2mm. It's not a great quality cut, but just about doable. Fire risk.
** GPPS / Polystyrene / HIPS in thin solid sheet form: maybe. ask owner to help. NO FOAM (it's highly flammable)

*Papery things
** Card/Paper: yes! (be careful of fire)
** Tissue: yes if super super really careful (be REALLY careful of fire, have emergency procedure in place before you start)

*Metally things
** Metal of any thickness doesn't cut. The surface can be engraved with a paint application. LMM6000 Surmark/Thermark has been tested and is suggested for use, but expensive. The owners suggest a speed of 800 and maximum power.

*Exotics
** Fibre glass: no (unknown resin, glass particles)
** Carbon Fibre: no
** Slate: engravable for good effect

Good list of info here: http://inventionstudio.gatech.edu/wiki/Laser_cutter (page disappeared, some time before 2016-12-12)

Very detailed cutting properties here: http://microfluidics.cnsi.ucsb.edu/tools/Trotec_laser_cutter/Synrad%20LaserProcessingGuide_Plastics.pdf

== Instructions ==

To use the laser cutter, you must have been trained and have had your name added to the trained user list; these instructions are not a substitute for this training. See the training section to understand how you can become qualified to use the laser cutter.

Although not a requirement, it is recommended someone else trained is also present when using the laser cutter. Having two pairs of eyes helps avoid forgotten steps, allows for double checking, clarifications and discussions, and ensures a greater pool of experience is both present and being built up as the laser is used.

'''Power Up'''

Give the machine a quick visual check. Make sure that there is nothing left on the bed, the water reservoir of the chiller looks normal, and that the equipment has no obvious damage or signs of being out-of-action. If the bed looks like it has residue on it, give it a wipe with IPA and a cloth.

Turn on primary switch on the trunking marked 'Laser'. The air filter system to the right of the laser cutter should start as should the air pump and the chiller. It should power up, make a decent amount of noise, and the lights should indicate the filter is in good condition (i.e. no need for replacement).

Make sure the lid is closed. Turn on the laser using the key on the right hand side. The inspection lamp should come on, a satisfying hum start up, and the cutter go into doing its self-checks.

Before doing any job, the laser should be left to warm up for 4-5 mins. While the machine warms up, power on the adjacent PC and start the LaserCut application from the desktop. During this time the water temperature shown on the chiller should drop from ambient temperature to the usual setting of 18C.

'''Load your Design'''

The PC software has an import facility ('''file > import''') which seems to be happy taking AutoCAD 2004 DXF files and other formats. The workspace of the laser bed is represented as the workarea in the LaserCut software. If the import doesn't do what you want size-wise, you can select the whole image and then use the 'size' command from the drop down menu to set the dimension you want. Clicking on the three dots ... symbol will adjust the other axis in the same proportion (keeping the aspect ratio fixed). Selecting the 'centre on bed' option will locate your imported drawing on the centre of the machine's cutting bed.

'''Assign Settings to Colours'''

Each part of your drawing that is assigned a different colour can have a different cut action assigned. Each colour will appear on the menu on the right hand side of the screen with numbers related to power and speed of the laser which will be used for the colour.

The main options are to Cut (line) or Engrave (raster fill). A marking on the material is a Cut. For each material and cutting depth required, a corresponding speed and power must be entered. The handbook provided with the machine gives suggested values for various materials but these should be considered as a starting point for a test. See the '''Power and Speed Settings''' section for our guidelines and experiences for these settings.

'''Download to the Cutter'''

Your drawing will feature a blue dot which represents the starting point of the laser; this is by default on the top right corner. In general, you will want to use "immediate" mode, which means this point represents wherever the laser is positioned when you start the job. You can also run the job in absolute mode by unchecking the box, making the job use absolute positioning on the workspace.

To download, select Download and Download Current; the download option will by default call the file on the laser cutter 'LASER'.

'''Set the Focus'''

Before each job, the focus needs to be checked and set by adjusting the height of the bed, and thus the work piece, from the lens. The critical dimension here is 41mm and several gauges made of perspex will be left around the machine. This gauge needs to be a fit between the top surface of the material you intend to cut and the white plastic 'flap' on the lens piece. The height of the table is adjusted using the UP and DOWN buttons. Failure to set the distance correctly will result in an out of focus laser and much bigger (but lower powered) cut line. Always ensure there is clearance between the material and laser head before the head moves.

'''Aligning and Testing the Job'''

The cutter's menu will show the most recent downloaded file highlighted. Pressing the 'test' button will make the head travel along the square maximum extends of the cuts. This shows you that you have the material in the right place, and you have enough of it! You can do this repeatedly, moving the work piece by hand or the laser head using the arrow keys (after hitting ESC), until you are confident you have things where you want them.

'''Cut the Job'''

When happy with the location of the material, close the lid and press 'start' to start the cutter. Watch the head and at least at first be prepared to press the 'stop' button immediately if you find you are burning massive holes in your work piece! This goes back to doing some tests on a sample of your material and making sure you are happy with the cut speeds and power you have selected. You should stay near the cutter at all times and be prepared to pause it or stop it in the event of fire.

<span style="color:red">'''DO NOT EVER LEAVE THE CUTTER UNATTENDED'''</span>

'''Finishing'''

The end of the job is signified by a beep. Waiting a few moments for the exhaust pump to clear any remaining smoke is a good idea, especially with wood, and will limit the build up of smells in the rest of the workshop. Remove your work piece, ensuring that all parts are cleared from the bed of the machine.

'''Power Down'''

The cutter is turned off using the key switch, then the air filtering system with the green rocker switch. Shut down the PC and double check that everything is left in a safe state for the next user.

'''Clean the bed of debris using the soft brush, then wipe down the bed using IPA and a cloth.'''

If you have been cutting particularly 'dirty' materials, most notable MDF and Ply which leave a sticky residue then you will need to use the course side of one of the oven pads and lots of 'elbow grease'. Residue on the bed can impact the next persons' job so please make the effort to clean up and leave the cutter as you would wish to find it.

Go away excited by what you can make and come back with lots more drawings!

== Power and Speed Settings ==

In due time we will try to build up a large sample stock of materials and record the values which work best. Here are the sample material tests we have so far:

<gallery>
File:Laser-schmoo-3mm-acrylic.JPG|3mm Acrylic
File:Laser-schmoo-10mm-acrylic.JPG|10mm Acrylic
File:Laser-schmoo-9mm-mdf.JPG|9mm MDF (note: do not cut MDF - see above!)
</gallery>

Settings to get you started:
*3mm Acrylic: Speed 12, Power 100, Corner power 100
*5mm Acrylic: Speed 6, Power 100, Corner power 100
*Acrylic shallow cut: Speed 30, power 50, corner power 50
*Etching acrylic: Speed 400, Power 50, Spacing 0.05

To make your own material test, a test grid can be downloaded here: [[Media:Test grid.zip]]

*3mm Delrin: Speed 10, Power 100, Corner power 100
*5mm Delrin: Speed 4, Power 100, Corner power 100
*6mm Delrin: speed 3, Power 100, Corner power 100

== Tips & Tricks ==

* If the laser cutter's user interface does not seem to respond/do what you want, hit "ESC" to return to 'normal mode'.
* The opaque white acrylic needs slightly stronger settings for surface cuts as they are not as visible as in the transparent acrylic (i.e., for similar effect you need a deeper cut). Otherwise seems to cut equivalently to transparent acrylics.
* If you want a tight fit of pieces or very accurate sizing, keep in mind that the laser beam has a width of just over 0.1 mm (maybe 0.11 or 0.12 mm). So all exterior cut lines should be offset by 0.05 mm; you can do this very easily in the LaserCutter Software with the "Offset" tool (units are in mm, so enter '0.05' and select 'Outer').
* The DXF file format stores values only (not values and units). The internal units in the LaserCutter are in mm. If you set your document's units to mm in the exporting CAD system it should work fine, but generally it is a good idea to have a piece of geometry of known length, e.g. a line 100mm long, or a box of known size around your design. This makes adjusting the scaling a lot easier.
* If you want to export a DXF from Inkscape (which is a great, free vector drawing package), then make sure you do "Object to path" from the Path menu for the whole object and then during the export stage, untick both options for type of export. Choose mm as your unit.
* There's now a page to help with Inkscape and our laser at [[Equipment/Laser_Cutter_Inkscape]]
* If the jog buttons (arrow keys moving the laser head around) are only moving the head in small single steps rather than moving it continuously, make sure that the jog step size is set to 0.0mm in the Jog Settings section of the menu.

=== Material Usage ===
You want to use as little material as possible to save money, we want you to use as little material as possible to reduce re-stocking burden and wastage.
There's a neat tool you can use for packing SVG files into small spaces, find it here: http://svgnest.com/

== Fixing up a job that went wrong ==

If you messed up a job and, for example, some cut lines weren't cut, you might try to run the job again after recolouring all of the lines except the ones that didn't cut. You can then deselect those lines for output in the Cut/Engrave window on the top right of the Lasercut Interface, and this will keep your positioning.

If your head has moved, you can try setting some lines to power 1, which should not cut anything, but allows you to see where the head is travelling.

== Fixing strange issues ==

''Jaws has a FAQ on the desktop of her PC, with more useful hints, tricks, and solutions.''

* Etching doesn't work
** Lines are not closed. LaserCut usually warns you about this. Ctrl-a to select all, then Tools->Unite Lines (0.001 should be fine).
** Two copies on top of each other. Copies on top of each other "cancel out" any etching. Delete one copy.
** Test with Menu->Laser->Simulate

* LaserCut will not download to the laser cutter
** Check laser cutter isn't in a paused state
** Restart LaserCut on the PC. (We've not had any usb issues nor needed to restart the laser since upgrading the PC summer 2014).

* Laser cuts things out 2+ times
** Check you don't have two copies loaded on top of each other
** Check it's not set to cut multiple times in LaserCut (this setting is right of the Cut/Engrave/Speed/Power settings)
** Check the laser front panel says "001" at the bottom. If not, press right arrow until the number is highlighted, then down to adjust back to 1, then press return.

* Laser will only cut at the top right of the bed
** Download again with Immediate Mode ticked
** On laser panel, press return (I think?) then right twice (should select the bottom left option), then press return (I think).

*You Hit Emergency stop
** E-M button needs twisting to re-activate
** If that fails - check the circuit breaker inside. From the back of the machine, you want to open the lower flap on the left side, which should be unlocked. Near to the back, there is a breaker board. Flip the flippy bit.

== Material Stock ==
For the stock we hold, please see the [[Equipment/Laser_Cutter_Stock|Laser cutter stock]] page.

= Maintenance =

The maintenance of the Laser Cutter is carried out by the Owners, with some basic maintenance being carried out by Users on every job.

== Maintenance Schedule ==

Continuous Maintenance ('''Every job, done by all Laser Cutter Users''')
* Clean the laser bed with IPA and cloth or Swarfega wipes
* Clean any debris off laser bed and surround using soft brush

Basic Maintenance (Every week, done by Laser Cutter Maintainers)
* Clean the laser lens with IPA and cotton buds
* Oil the 3 runners with 3-in-one light oil
* Thoroughly clean the laser bed with IPA and cloth
* Check the water level in the cooling tank
* Clean and remove debris from the machine base and catchment drawer

Full Maintenance (Every 4 weeks, done by Laser Cutter Maintainers)
* Check the water is clean in the cooling tank (i.e. no contamination/organic build up)
* Check filter unit for filter renewal
* Oil the 4 rise and fall lead screws with 3-in-one light oil
* Check mirrors and clean with a disposable sachet lens cleaner cloth (only if needed, mirror coatings are delicate)
* Work through mirror alignment procedure to check alignment of mirrors

== Maintenance Log ==

''For full log, see laser cutter wall sheet''

For specific instructions and owner hints and tips see [[Equipment/Laser_Cutter/Owner_Tips|Owner Hints and Tricks]].

'''Filter Changes'''
* Jaws: 10 Feb to 22 June 2016, slightly under 5 months, and falling
* Betsy: Freshest data currently in filter unit, gave up on 24th of June

'''Reactive Maintenance'''
* 15th Jan 2013, Simon Ford: Laser cutter not powering up, with switching on via key gives no activity whatsoever. No recollection of it cutting out during a job (Alexis), so assume it just stopped turning on at some point. Filter box and power sockets confirmed OK. Diagnosis: RCD in right back panel of Laser reset to off, no obvious reason why. Switching back on brought everything back to life OK.
* 22nd, Simon Ford; 29th, Nicholas - same again.

* Apr 2014, Mat Cook and Diana Probst: after previous changing of chiller water (Roger et al) the pump was complaining of lack of flow. Changed water and filtered, removed small blockage from rubber hose on laser tube.

* 16 Apr 2014, Toby and Diana: changed laser tube, refilled chiller. Laser cutter fully working.

* 25 Oct 2014, Mat and Diana mended lid spring brace. Cutter working fully.

'''Regular Maintenance'''
* Week Number, Date, Type, Owner (Notes)

2013
* January 7, Full, Chris @ HPCLaser'''
* January 14, Basic, Simon Ford
* January 21, Full, Simon Ford (running better than new :)'''
* ...various maintenance events happened...
* April 5th, Full, Simon Ford
* July 1st, Full, David Barham (realigned mirrors)
* July 15th, installed chiller

2014
* 16 Apr 2014, mirror alignment and optics checked after re-installation of tube. All fine. Toby and Diana.
* 19 May 2014, mirrors cleaned, earthing wire on lid tightened. Diana (and Mat's screwdriver)
* 21 May 2014, cleaned lens with Mat Cook. Diana
* 02 Jun 2014, removed and cleaned laser bed
* 14 Sep 2014, cleaned lens and mirrors, realigned. Diana and Brian Starkey

* 30 Jun 2014 Fitted microswitches in series with the magnetic "lid closed" detector.
* ??? 2014 "Jaws" Second laser cutter acquired
* ??? 2014 Fitted microswitch to Jaws

== Maintenance Shopping List ==

* 3-in-one light oil
* Cotton Buds
* Lens cleaner sachets
* Soft paint/cleaning brush
* Thermometer for water tank
* Hand held CO2 extinguisher

= Further Information =

* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser Product Page]
* [http://hpclaser.co.uk/index.php?main_page=page&id=5&chapter=2 HPCLaser Technical Info]
* [http://www.laserscript.co.uk/phpBB3/ Laserscript Forum]

LaserCut 5.3
* [http://www.leetro.com/english/sale/35.html Homepage]
* [http://www.leetro.com/english/down/LaserCut5.3%20Manual%20V1.6.pdf Manual]

== Installation ==

<gallery>
File:Laser_-_van.JPG
File:Makespace-laser-install-02.JPG
File:Laser_-_building_2.JPG
File:Laser_-_building.JPG
</gallery>

== Purchase ==

Full Purchase, Delivery and Installation (£6865.00+vat = £8238.00)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser engraving and cutting machine, 600mm by 900mm 60W] (£5250.00+vat)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=34 Laser Fume Filter] (£1250.00+vat)
* Delivery (£190+vat)
* Installation/Training (£175+vat)

== Repairs ==

We expect to have to change the following parts for general maintenance:
* The laser tube (guess every 6-12 months)
* The filter (guess every 3-6 months)
* The optics (guess every 6-12 months)

Maintenance and Spares:
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=3 60 watt C02 laser tube] (£275.00+vat)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=12 50 mm Focus Meniscus Lens] (£75.00+vat)
* Estimate for Call Out (£200.00)

Equipment/Laser Cutter

2017-06-02T10:44:10Z

JonnyPW: /* Can I cut it? */

{{RedTool}}

[[Equipment|Equipment]] / Laser Cutter

[[File:Makespace-laser-cutter.JPG|thumb|460px|right|Our LS6090 PRO Laser Cutter]]

= Summary =

We have two LS 6090 PRO Laser Cutters. Each has a working area of 900mm by 600mm, and is powered by a 60w CO2 Water Cooled Laser Tube that can engrave and cut through materials such as wood, plastic, card, leather, fabrics, up to about 10-15mm thick (note, it can not cut metal). The laser cut is approximately 0.15mm wide, and a job can take a few seconds through to tens of minutes depending on material thickness and design complexity.

We have dedicated PCs running LaserCut 5.3 software to import, prepare and download jobs to the Laser Cutter. It can import various formats, with DXF being the most commonly used, so various software packages can be used to create your designs.

Here are some examples of laser jobs we've run (please add a photo of yours any time you do a job!)

<gallery>
File:Laser-cut-focus-tool.JPG
File:Laser-cut-front-panels.JPG
File:Laser-cut-lizards.JPG
File:Laser-cut-m-and-s.JPG
File:Laser-cut-model-building.JPG
File:Laser-cut-ply-m.JPG
File:Laser_output_-_makespace_arrow.JPG
File:Laser_box.jpg
File:Croc-small.jpg
File:LaserCutter_Jobs_1.jpg
File:LaserCutterGallery_20130328.jpg
File:LasercutSettlers.jpg
File:Wolfstock1.jpg
File:Mug-holder.jpg
File:2013-10-21 20.10.06.jpg
File:Indy jigster.png
</gallery>

= Using the Laser Cutter =

The laser cutter is a great way to easily produce accurate and complex 2D forms in various materials, and can be designed for with limited experience in various drawing or CAD applications. At the same time, it is an expensive tool with real risk of injury and fire, so is very important you know how to use it to avoid damaging yourself and the machine. '''You must only use the laser cutter if you have been trained, and if you are ever in any doubt about something, please ask for assistance.'''

== Owners ==

The Owners are those who have volunteered to be in charge of the laser cutter, organising maintenance, responding to technical issues and generally being a point of contact. The current Owners of the Laser Cutter are:

* [[User:Mat-C|Mat Cook]]
* [[User:DianaProbst|Diana Probst]]
* Owners who are a little less current, but may still be able to help:
** [[User:Simon|Simon Ford]]
** [[User:Barhamd|David Barham]]
** [[User:Nickcadsoftuk|Nick Johnson]]

== Trainers ==

The Trainers are those who have volunteered to teach others to use the laser cutter and to promote good working practice. The current Trainers for the Laser Cutter are:

* Brian Starkey
* [[User:stevancw|Stevan Wing]]
* [[User:Mat-C|Mat Cook]]
* [[User:robv|Rob Voisey]]
* Miguel Morin

* Currently slightly less frequent trainers are:
** Martin de Selincourt
** [[User:Simon|Simon Ford]]
** [[User:Barhamd|David Barham]]
** [[User:Nickcadsoftuk|Nick Johnson]]
** [[User:Tmonca|Toby Moncaster]]

If you have any questions, problems or concerns around the laser cutter, please use the forum page:
* [http://makespace.org/forum/viewtopic.php?f=19&t=45 Laser Cutter Log]

For the old mailing list thread see here:
* [https://groups.google.com/d/topic/cammakespace/Tmce2iKVzD8/discussion Log : Laser Cutter]

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>YOU CAN ONLY USE THE LASER CUTTER IF YOU HAVE BEEN TRAINED</b><br>
and have been added to the [[Equipment/Laser_Cutter/Training#Trained_Users|Trained Users]] list by one of the Owners
</div>

To get trained on the laser cutter and be added to the qualified user list, you will need to arrange for a training session with one of the Laser Cutter Owners.

If you'd like to arrange training, please see:
* [[Equipment/Laser_Cutter/Training|Laser Cutter Training]]

== Health and Safety ==

The laser cutter is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the laser cutter are:
* '''ONLY USE THE LASER CUTTER IF YOU ARE ON THE LIST OF TRAINED USERS'''
* '''NEVER LEAVE THE LASER CUTTER RUNNING UNATTENDED'''
* '''KNOW WHAT TO DO IF A FIRE BREAKS OUT'''
* '''NEVER CUT MATERIALS THAT YOU DON'T KNOW ARE SAFE'''

As a trained user, you should be very aware of the following risks and how to deal with them:

'''FIRE (under normal operation)''' - Cutting at the wrong speed or the wrong power can result in the material igniting
* You must watch the cutter at all times and be prepared to abort the job if problems occur
* Small flashes of flame that don't hang around for a fraction of a second are acceptable, but any more is rare and not acceptable
* If a fire does take, this is the process you should follow (from minor to major):
** Press "pause" (the same button you started the job with) - This will turn the laser off so no more heat enters, and assuming the flame goes out, you can press "start" for the job to continue where it left off
** Open the lid - With the job paused, you can open the lid to blow out the flame. Again, it is possible to re-close the lid and continue where you left off
** Move the material from under the laser head assuming safe to do so (so it doesn't damage the optics; alternatively send the laser to home/datum), and smother with a spare sheet of material or blow out
** Use the workshop CO2 extinguisher to extinguish the flame
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

'''FIRE (abnormal operation)''' - If the head gets stuck or something else goes wrong, ignition could happen much more suddenly or intensely
* You must watch the cutter at all times and be prepared to abort the job if problems occur
* If the head gets trapped (e.g. tomb-stoning of a piece, mechanical failure) or any other problem occurs that causes or could cause fire, this is the process you should follow:
** Hit the emergency stop
** Open the lid and move the material from under the laser head assuming safe to do so (so it doesn't damage the optics)
** Blow out, smother with a spare sheet of material, or use the CO2 extinguisher to extinguish the flame as appropriate
* Ensure a Maintainer looks at the machine before it is brought back in to action if it is not obvious what went wrong and all is ok
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

'''FUMES''' - The laser cutting process will release different smoke and fumes depending on the material.
* Never cut PVC or a material you are not sure is safe. When PVC is heated it releases chlorine gas, this mixes with the moisture in the air and the result is hydrochloric acid which is toxic to humans and corrosive to machines.
* Ensure the filter is on and the cutter lid stays closed for a while after a job to allow the fumes to clear.
* If you are feeling strange, think the fume build up is too much, or for any other reason you are unsure, stop the job.

'''TRAPPING''' - The head and bed of the cutter can be moved by the front panel menu or programs in the machines memory.
* Be careful when working inside the cutting area or with the lid open not to trap hands, hair, clothing or anything else.
* Always check the machine for unexpected items that may have fallen in before closing the lid.
* Do not attempt to climb into the machine!

'''LASER BURNS/LIGHT''' - A 60W laser can do real damage.
* The laser should be safe within the confines of the machine, and cut-off automatically when the lid is open (although this should not be relied upon). The top window is safe to look through during a job, but do not attempt to interfere with these windows or the laser or in any way invent some way to look at the laser.
* Do not tamper with the laser cutter, or any interlocks. All side panels of the laser should always be closed and locked whilst the machine is plugged in.
* Do not put metal in the laser cutter.

== Can I cut it? ==

If it's not on this list, the answer is "NO YOU CAN'T CUT IT AT MAKESPACE". Even if other people say it's ok. Bear in mind that we can't ventilate externally like other people can.

If it's something that isn't covered here, do ask on the forums and we'll look into it :)

*Woody things
** Wood: yes! (be careful of fire)
** Plywood: yes if it is "laser ply". Normal plywood has non-laser compatible glue
** MDF: no. Clogs up our filters and smells bad.
** LaserMDF: no. It produces perhaps 50% the gunk of MDF but still too much.
** Cork: yes, but it with a badly charred edge, and won't cut very deeply --- try cutting from the back of your sheet and using the cut to guide a craft knife / scalpel to make a neat cut through to the front.

*Plasticy things
** Acrylic / Perspex: yes!
** PVC/Vinyl: absolutely not. Produces chlorine.
** Silicone: we tried it with very limited success. A mm or two perhaps, anything else chars and doesn't cut.
** White Delrin/Acetal: yes with great care. Make sure filters running well. Don't open lid too quickly. Check for fumes and fire.
** Black Delrin/Acetal: no. contains carbon black which can be toxic.
** Teflon: no (it is toxic)
** Nylon: no (consult an owner)
** Polythene/polyethylene: no (consult an owner)
** Lexan/Polycarbonate: no (consult an owner)
** Polypropylene: yes just. You must clean the bed. It will cut up to about 2mm. It's not a great quality cut, but just about doable. Fire risk.
** GPPS / Polystyrene / HIPS in thin solid sheet form: maybe. ask owner to help. NO FOAM (it's highly flammable)

*Papery things
** Card/Paper: yes! (be careful of fire)
** Tissue: yes if super super really careful (be REALLY careful of fire, have emergency procedure in place before you start)

*Metally things
** Metal of any thickness doesn't cut. The surface can be engraved with a paint application. LMM6000 Surmark/Thermark has been tested and is suggested for use, but expensive. The owners suggest a speed of 800 and maximum power.

*Exotics
** Fibre glass: no (unknown resin, glass particles)
** Carbon Fibre: no
** Slate: engravable for good effect

Good list of info here: http://inventionstudio.gatech.edu/wiki/Laser_cutter (page disappeared, some time before 2016-12-12)
Very detailed cutting properties here: http://microfluidics.cnsi.ucsb.edu/tools/Trotec_laser_cutter/Synrad%20LaserProcessingGuide_Plastics.pdf

== Instructions ==

To use the laser cutter, you must have been trained and have had your name added to the trained user list; these instructions are not a substitute for this training. See the training section to understand how you can become qualified to use the laser cutter.

Although not a requirement, it is recommended someone else trained is also present when using the laser cutter. Having two pairs of eyes helps avoid forgotten steps, allows for double checking, clarifications and discussions, and ensures a greater pool of experience is both present and being built up as the laser is used.

'''Power Up'''

Give the machine a quick visual check. Make sure that there is nothing left on the bed, the water reservoir of the chiller looks normal, and that the equipment has no obvious damage or signs of being out-of-action. If the bed looks like it has residue on it, give it a wipe with IPA and a cloth.

Turn on primary switch on the trunking marked 'Laser'. The air filter system to the right of the laser cutter should start as should the air pump and the chiller. It should power up, make a decent amount of noise, and the lights should indicate the filter is in good condition (i.e. no need for replacement).

Make sure the lid is closed. Turn on the laser using the key on the right hand side. The inspection lamp should come on, a satisfying hum start up, and the cutter go into doing its self-checks.

Before doing any job, the laser should be left to warm up for 4-5 mins. While the machine warms up, power on the adjacent PC and start the LaserCut application from the desktop. During this time the water temperature shown on the chiller should drop from ambient temperature to the usual setting of 18C.

'''Load your Design'''

The PC software has an import facility ('''file > import''') which seems to be happy taking AutoCAD 2004 DXF files and other formats. The workspace of the laser bed is represented as the workarea in the LaserCut software. If the import doesn't do what you want size-wise, you can select the whole image and then use the 'size' command from the drop down menu to set the dimension you want. Clicking on the three dots ... symbol will adjust the other axis in the same proportion (keeping the aspect ratio fixed). Selecting the 'centre on bed' option will locate your imported drawing on the centre of the machine's cutting bed.

'''Assign Settings to Colours'''

Each part of your drawing that is assigned a different colour can have a different cut action assigned. Each colour will appear on the menu on the right hand side of the screen with numbers related to power and speed of the laser which will be used for the colour.

The main options are to Cut (line) or Engrave (raster fill). A marking on the material is a Cut. For each material and cutting depth required, a corresponding speed and power must be entered. The handbook provided with the machine gives suggested values for various materials but these should be considered as a starting point for a test. See the '''Power and Speed Settings''' section for our guidelines and experiences for these settings.

'''Download to the Cutter'''

Your drawing will feature a blue dot which represents the starting point of the laser; this is by default on the top right corner. In general, you will want to use "immediate" mode, which means this point represents wherever the laser is positioned when you start the job. You can also run the job in absolute mode by unchecking the box, making the job use absolute positioning on the workspace.

To download, select Download and Download Current; the download option will by default call the file on the laser cutter 'LASER'.

'''Set the Focus'''

Before each job, the focus needs to be checked and set by adjusting the height of the bed, and thus the work piece, from the lens. The critical dimension here is 41mm and several gauges made of perspex will be left around the machine. This gauge needs to be a fit between the top surface of the material you intend to cut and the white plastic 'flap' on the lens piece. The height of the table is adjusted using the UP and DOWN buttons. Failure to set the distance correctly will result in an out of focus laser and much bigger (but lower powered) cut line. Always ensure there is clearance between the material and laser head before the head moves.

'''Aligning and Testing the Job'''

The cutter's menu will show the most recent downloaded file highlighted. Pressing the 'test' button will make the head travel along the square maximum extends of the cuts. This shows you that you have the material in the right place, and you have enough of it! You can do this repeatedly, moving the work piece by hand or the laser head using the arrow keys (after hitting ESC), until you are confident you have things where you want them.

'''Cut the Job'''

When happy with the location of the material, close the lid and press 'start' to start the cutter. Watch the head and at least at first be prepared to press the 'stop' button immediately if you find you are burning massive holes in your work piece! This goes back to doing some tests on a sample of your material and making sure you are happy with the cut speeds and power you have selected. You should stay near the cutter at all times and be prepared to pause it or stop it in the event of fire.

<span style="color:red">'''DO NOT EVER LEAVE THE CUTTER UNATTENDED'''</span>

'''Finishing'''

The end of the job is signified by a beep. Waiting a few moments for the exhaust pump to clear any remaining smoke is a good idea, especially with wood, and will limit the build up of smells in the rest of the workshop. Remove your work piece, ensuring that all parts are cleared from the bed of the machine.

'''Power Down'''

The cutter is turned off using the key switch, then the air filtering system with the green rocker switch. Shut down the PC and double check that everything is left in a safe state for the next user.

'''Clean the bed of debris using the soft brush, then wipe down the bed using IPA and a cloth.'''

If you have been cutting particularly 'dirty' materials, most notable MDF and Ply which leave a sticky residue then you will need to use the course side of one of the oven pads and lots of 'elbow grease'. Residue on the bed can impact the next persons' job so please make the effort to clean up and leave the cutter as you would wish to find it.

Go away excited by what you can make and come back with lots more drawings!

== Power and Speed Settings ==

In due time we will try to build up a large sample stock of materials and record the values which work best. Here are the sample material tests we have so far:

<gallery>
File:Laser-schmoo-3mm-acrylic.JPG|3mm Acrylic
File:Laser-schmoo-10mm-acrylic.JPG|10mm Acrylic
File:Laser-schmoo-9mm-mdf.JPG|9mm MDF (note: do not cut MDF - see above!)
</gallery>

Settings to get you started:
*3mm Acrylic: Speed 12, Power 100, Corner power 100
*5mm Acrylic: Speed 6, Power 100, Corner power 100
*Acrylic shallow cut: Speed 30, power 50, corner power 50
*Etching acrylic: Speed 400, Power 50, Spacing 0.05

To make your own material test, a test grid can be downloaded here: [[Media:Test grid.zip]]

*3mm Delrin: Speed 10, Power 100, Corner power 100
*5mm Delrin: Speed 4, Power 100, Corner power 100
*6mm Delrin: speed 3, Power 100, Corner power 100

== Tips & Tricks ==

* If the laser cutter's user interface does not seem to respond/do what you want, hit "ESC" to return to 'normal mode'.
* The opaque white acrylic needs slightly stronger settings for surface cuts as they are not as visible as in the transparent acrylic (i.e., for similar effect you need a deeper cut). Otherwise seems to cut equivalently to transparent acrylics.
* If you want a tight fit of pieces or very accurate sizing, keep in mind that the laser beam has a width of just over 0.1 mm (maybe 0.11 or 0.12 mm). So all exterior cut lines should be offset by 0.05 mm; you can do this very easily in the LaserCutter Software with the "Offset" tool (units are in mm, so enter '0.05' and select 'Outer').
* The DXF file format stores values only (not values and units). The internal units in the LaserCutter are in mm. If you set your document's units to mm in the exporting CAD system it should work fine, but generally it is a good idea to have a piece of geometry of known length, e.g. a line 100mm long, or a box of known size around your design. This makes adjusting the scaling a lot easier.
* If you want to export a DXF from Inkscape (which is a great, free vector drawing package), then make sure you do "Object to path" from the Path menu for the whole object and then during the export stage, untick both options for type of export. Choose mm as your unit.
* There's now a page to help with Inkscape and our laser at [[Equipment/Laser_Cutter_Inkscape]]
* If the jog buttons (arrow keys moving the laser head around) are only moving the head in small single steps rather than moving it continuously, make sure that the jog step size is set to 0.0mm in the Jog Settings section of the menu.

=== Material Usage ===
You want to use as little material as possible to save money, we want you to use as little material as possible to reduce re-stocking burden and wastage.
There's a neat tool you can use for packing SVG files into small spaces, find it here: http://svgnest.com/

== Fixing up a job that went wrong ==

If you messed up a job and, for example, some cut lines weren't cut, you might try to run the job again after recolouring all of the lines except the ones that didn't cut. You can then deselect those lines for output in the Cut/Engrave window on the top right of the Lasercut Interface, and this will keep your positioning.

If your head has moved, you can try setting some lines to power 1, which should not cut anything, but allows you to see where the head is travelling.

== Fixing strange issues ==

''Jaws has a FAQ on the desktop of her PC, with more useful hints, tricks, and solutions.''

* Etching doesn't work
** Lines are not closed. LaserCut usually warns you about this. Ctrl-a to select all, then Tools->Unite Lines (0.001 should be fine).
** Two copies on top of each other. Copies on top of each other "cancel out" any etching. Delete one copy.
** Test with Menu->Laser->Simulate

* LaserCut will not download to the laser cutter
** Check laser cutter isn't in a paused state
** Restart LaserCut on the PC. (We've not had any usb issues nor needed to restart the laser since upgrading the PC summer 2014).

* Laser cuts things out 2+ times
** Check you don't have two copies loaded on top of each other
** Check it's not set to cut multiple times in LaserCut (this setting is right of the Cut/Engrave/Speed/Power settings)
** Check the laser front panel says "001" at the bottom. If not, press right arrow until the number is highlighted, then down to adjust back to 1, then press return.

* Laser will only cut at the top right of the bed
** Download again with Immediate Mode ticked
** On laser panel, press return (I think?) then right twice (should select the bottom left option), then press return (I think).

*You Hit Emergency stop
** E-M button needs twisting to re-activate
** If that fails - check the circuit breaker inside. From the back of the machine, you want to open the lower flap on the left side, which should be unlocked. Near to the back, there is a breaker board. Flip the flippy bit.

== Material Stock ==
For the stock we hold, please see the [[Equipment/Laser_Cutter_Stock|Laser cutter stock]] page.

= Maintenance =

The maintenance of the Laser Cutter is carried out by the Owners, with some basic maintenance being carried out by Users on every job.

== Maintenance Schedule ==

Continuous Maintenance ('''Every job, done by all Laser Cutter Users''')
* Clean the laser bed with IPA and cloth or Swarfega wipes
* Clean any debris off laser bed and surround using soft brush

Basic Maintenance (Every week, done by Laser Cutter Maintainers)
* Clean the laser lens with IPA and cotton buds
* Oil the 3 runners with 3-in-one light oil
* Thoroughly clean the laser bed with IPA and cloth
* Check the water level in the cooling tank
* Clean and remove debris from the machine base and catchment drawer

Full Maintenance (Every 4 weeks, done by Laser Cutter Maintainers)
* Check the water is clean in the cooling tank (i.e. no contamination/organic build up)
* Check filter unit for filter renewal
* Oil the 4 rise and fall lead screws with 3-in-one light oil
* Check mirrors and clean with a disposable sachet lens cleaner cloth (only if needed, mirror coatings are delicate)
* Work through mirror alignment procedure to check alignment of mirrors

== Maintenance Log ==

''For full log, see laser cutter wall sheet''

For specific instructions and owner hints and tips see [[Equipment/Laser_Cutter/Owner_Tips|Owner Hints and Tricks]].

'''Filter Changes'''
* Jaws: 10 Feb to 22 June 2016, slightly under 5 months, and falling
* Betsy: Freshest data currently in filter unit, gave up on 24th of June

'''Reactive Maintenance'''
* 15th Jan 2013, Simon Ford: Laser cutter not powering up, with switching on via key gives no activity whatsoever. No recollection of it cutting out during a job (Alexis), so assume it just stopped turning on at some point. Filter box and power sockets confirmed OK. Diagnosis: RCD in right back panel of Laser reset to off, no obvious reason why. Switching back on brought everything back to life OK.
* 22nd, Simon Ford; 29th, Nicholas - same again.

* Apr 2014, Mat Cook and Diana Probst: after previous changing of chiller water (Roger et al) the pump was complaining of lack of flow. Changed water and filtered, removed small blockage from rubber hose on laser tube.

* 16 Apr 2014, Toby and Diana: changed laser tube, refilled chiller. Laser cutter fully working.

* 25 Oct 2014, Mat and Diana mended lid spring brace. Cutter working fully.

'''Regular Maintenance'''
* Week Number, Date, Type, Owner (Notes)

2013
* January 7, Full, Chris @ HPCLaser'''
* January 14, Basic, Simon Ford
* January 21, Full, Simon Ford (running better than new :)'''
* ...various maintenance events happened...
* April 5th, Full, Simon Ford
* July 1st, Full, David Barham (realigned mirrors)
* July 15th, installed chiller

2014
* 16 Apr 2014, mirror alignment and optics checked after re-installation of tube. All fine. Toby and Diana.
* 19 May 2014, mirrors cleaned, earthing wire on lid tightened. Diana (and Mat's screwdriver)
* 21 May 2014, cleaned lens with Mat Cook. Diana
* 02 Jun 2014, removed and cleaned laser bed
* 14 Sep 2014, cleaned lens and mirrors, realigned. Diana and Brian Starkey

* 30 Jun 2014 Fitted microswitches in series with the magnetic "lid closed" detector.
* ??? 2014 "Jaws" Second laser cutter acquired
* ??? 2014 Fitted microswitch to Jaws

== Maintenance Shopping List ==

* 3-in-one light oil
* Cotton Buds
* Lens cleaner sachets
* Soft paint/cleaning brush
* Thermometer for water tank
* Hand held CO2 extinguisher

= Further Information =

* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser Product Page]
* [http://hpclaser.co.uk/index.php?main_page=page&id=5&chapter=2 HPCLaser Technical Info]
* [http://www.laserscript.co.uk/phpBB3/ Laserscript Forum]

LaserCut 5.3
* [http://www.leetro.com/english/sale/35.html Homepage]
* [http://www.leetro.com/english/down/LaserCut5.3%20Manual%20V1.6.pdf Manual]

== Installation ==

<gallery>
File:Laser_-_van.JPG
File:Makespace-laser-install-02.JPG
File:Laser_-_building_2.JPG
File:Laser_-_building.JPG
</gallery>

== Purchase ==

Full Purchase, Delivery and Installation (£6865.00+vat = £8238.00)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser engraving and cutting machine, 600mm by 900mm 60W] (£5250.00+vat)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=34 Laser Fume Filter] (£1250.00+vat)
* Delivery (£190+vat)
* Installation/Training (£175+vat)

== Repairs ==

We expect to have to change the following parts for general maintenance:
* The laser tube (guess every 6-12 months)
* The filter (guess every 3-6 months)
* The optics (guess every 6-12 months)

Maintenance and Spares:
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=3 60 watt C02 laser tube] (£275.00+vat)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=12 50 mm Focus Meniscus Lens] (£75.00+vat)
* Estimate for Call Out (£200.00)

Equipment/WarcoMill/Training

2016-11-02T14:38:34Z

JonnyPW:

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.</b><br>
</div>

Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.

All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill.

[https://docs.google.com/document/d/13lQ4t1RRx7cGYytwD7E-Dg0Pstm2lZB0eKuCg8dDNyc/edit?usp=sharing Lesson 1 script]<br>
[https://docs.google.com/document/d/1mfN7JvnaYk4J8iicOznE8pkpWFN-kGCtKvgEWc73V5w/edit?usp=sharing Lesson 2 script]<br>
[https://docs.google.com/document/d/1b9cfFrsTvM1Xl9mLMjN1aBLy9p01ao8WE1qDZkrgZGI/edit?usp=sharing Lesson 3 script]<br>
[https://docs.google.com/document/d/1XtusHkKJt24aJodyJ5e330CRioY-CL3FWVzMMIiQjNI/edit?usp=sharing Lesson 4 script]

As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills]

== Owners ==

* Mat Cook
* Diana Probst
* Roger Smith

== Trainers ==

* Diana Probst
* Mat Cook
* Jonathan Waite
* Ben Alper

== Trained Users ==

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.

{| class="wikitable"
|-
! User!! Trained level !! Mill access
|-
| Diana Probst || --- || Trainer
|-
| Jonathan Waite* || --- || Trainer
|-
| Stevan Wing || Intro || Timed Out: start from beginning
|-
| Matthew Taylor || Initial Guide and Lesson A || Timed Out: start from beginning
|-
| Steve O || Initial Guide and Lessons A - C (conversion) || Continued teaching
|-
| John Sturdy* || Initial Guide and Lessons A - C || Must refresh
|-
| Ben Alper* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Evans* || Initial Guide and Lessons A - C || Continued teaching
|-
| Rob Rescorla* || Initial Guide and Lessons A - C || Continued teaching
|-
| Shareef Jalloq* || Initial Guide and Lessons A - C || Continued teaching
|-
| Robert Karpinski* || Initial Guide and Lessons A - C || Free to use
|-
| Marco Aita* || Initial Guide and Lessons A - C || Continued teaching
|-
| Stephen Harrison* || Initial Guide and Lessons A-C || Continued teaching
|-
| Mark Tillotson || Initial Guide and Lessons A-C || Continued Teaching
|-
| Dave Horsnell* || Initial Guide and Lessons A-C || Continued teaching
|-
| Phill Banks* || Intial Guide and Lessons A-C || Continued Teaching
|}

* indicates user has read and signed safe use document

Equipment/Lathe/Training

2016-05-19T11:02:11Z

JonnyPW: /* Lathe Training */

= Lathe Training =

Lathe training is done in group sessions. The tour of the machine is followed by an explanation of the hazards. Each member then participates in a short construction project to learn what it feels, sounds and looks like to do it properly. It should take 2 to 2.5 hours.

The main danger is getting caught in the work because the motor will not stop if this happens. Users must not wear loose clothing, or allow hair to get near the workpiece.

Gloves are NOT recommended.

Chips from the work are a hazard to eyes so eye protection is essential.

Before starting the motor make sure the chuck is moving freely and that the key is out.

The swarf, particularly steel swarf has sharp edges so a brush should be used to clean everything.

The training script is available [https://docs.google.com/document/d/1Jei2wuluk728dv71LJ4BJGIson9IU74uLyVKNtf9-tE/edit?usp=sharing here].

= Trained user list =
* Owner - Roger Smith
* Owner - [[user:RobCopcutt|Robert Copcutt]]

*Mark Tillotson - (Robert Copcutt 2013)
*Chris Abri
*Tom Ingham
*Martin De Selincourt
*Peter Sewell
*Ben Evans
*Adrian Carr
*Antonio Barragan
*Tom Oinn
*Maciek Piztek
*Pop Sharma
*John Clamp
*Shareef Jalloq
*Errol McMullen
*Patrick Greaney
*Renee Chow
*Joe Tapply
*David Webb
*John Sturdy
*Peter Provis
*Rachel Rayns
*Marco Cosic
*Kevin Latter
*Michael Thomas
*Richard Mitchell
*Lewis Williams
*Dan Tidhar
*Marco Aita
*John Simm
*Andrew Lipson
*Benjamin Kidder
*Harry Braviner
*Esther Leighton
*Christie Nel
*Stuart Wilson
*Kim Spence-Jones
* Matt Grimes
* Jon Aas
* Aleusandar Tomic
* Richard Fosh
* Fergus Riche
* Toby Moncaster
* Riccardo Gherardi
* Peter Knight
* Jason White
* Robert Karpinski
* Ben Butler
* Josh Simpson
* Emyr James
* Daniel Garden
* Vincent Sanders
* Mat Greenwood
* Paul Osborn
* Tim Lowsen
* Owen Woods
* Eric Jones
* Martin Lenz
* Adrian Van den Heever
* Mark Cheverton
* David Grech
* David Horsnell
* Paul Holland
* Kevin Rathbone
* Rob Voisey
* Al Napp
* Jon Green
* Milosz Wasilewski
* John Sidinopoulos
* Alex Gee
* Jonny Waite
* Andy McDonald
* Eric Gowland
* Steve Osbourne
* Jennifer Herbert
* Geoff Lunn
* Daniel Farrant
* Kristien De Clercq
* Ian McFarlane
* Adam Nightingale
* Zizwani Mhango
* Luke Twydell
* Ed Robertson
* Diana Probst
* Patrick Riggs
* Charlotte Harvey
* Robin Sterling
* Nicola Westgarth-Flynn
* Phill Banks
* Hugo Keene
* Giovanni Bisutti
* Andrew Cooke
* Jeremy Minton - 17/05/16 JPW
* Jeremy Bentham - 17/05/16 JPW
* Toby Roberts - 17/05/16 JPW
* Thomas Gillespie - 17/05/16 JPW

Equipment/Lathe/Training

2016-05-19T10:59:26Z

JonnyPW: /* Trained user list */

= Lathe Training =

Lathe training is done in group sessions. The tour of the machine is followed by an explanation of the hazards. Each member then participates in a short construction project to learn what it feels, sounds and looks like to do it properly. It should take 2 to 2.5 hours.

The main danger is getting caught in the work because the motor will not stop if this happens. Users must not wear loose clothing, or allow hair to get near the workpiece.

Gloves are NOT recommended.

Chips from the work are a hazard to eyes so eye protection is essential.

Before starting the motor make sure the chuck is moving freely and that the key is out.

The swarf, particularly steel swarf has sharp edges so a brush should be used to clean everything.

= Trained user list =
* Owner - Roger Smith
* Owner - [[user:RobCopcutt|Robert Copcutt]]

*Mark Tillotson - (Robert Copcutt 2013)
*Chris Abri
*Tom Ingham
*Martin De Selincourt
*Peter Sewell
*Ben Evans
*Adrian Carr
*Antonio Barragan
*Tom Oinn
*Maciek Piztek
*Pop Sharma
*John Clamp
*Shareef Jalloq
*Errol McMullen
*Patrick Greaney
*Renee Chow
*Joe Tapply
*David Webb
*John Sturdy
*Peter Provis
*Rachel Rayns
*Marco Cosic
*Kevin Latter
*Michael Thomas
*Richard Mitchell
*Lewis Williams
*Dan Tidhar
*Marco Aita
*John Simm
*Andrew Lipson
*Benjamin Kidder
*Harry Braviner
*Esther Leighton
*Christie Nel
*Stuart Wilson
*Kim Spence-Jones
* Matt Grimes
* Jon Aas
* Aleusandar Tomic
* Richard Fosh
* Fergus Riche
* Toby Moncaster
* Riccardo Gherardi
* Peter Knight
* Jason White
* Robert Karpinski
* Ben Butler
* Josh Simpson
* Emyr James
* Daniel Garden
* Vincent Sanders
* Mat Greenwood
* Paul Osborn
* Tim Lowsen
* Owen Woods
* Eric Jones
* Martin Lenz
* Adrian Van den Heever
* Mark Cheverton
* David Grech
* David Horsnell
* Paul Holland
* Kevin Rathbone
* Rob Voisey
* Al Napp
* Jon Green
* Milosz Wasilewski
* John Sidinopoulos
* Alex Gee
* Jonny Waite
* Andy McDonald
* Eric Gowland
* Steve Osbourne
* Jennifer Herbert
* Geoff Lunn
* Daniel Farrant
* Kristien De Clercq
* Ian McFarlane
* Adam Nightingale
* Zizwani Mhango
* Luke Twydell
* Ed Robertson
* Diana Probst
* Patrick Riggs
* Charlotte Harvey
* Robin Sterling
* Nicola Westgarth-Flynn
* Phill Banks
* Hugo Keene
* Giovanni Bisutti
* Andrew Cooke
* Jeremy Minton - 17/05/16 JPW
* Jeremy Bentham - 17/05/16 JPW
* Toby Roberts - 17/05/16 JPW
* Thomas Gillespie - 17/05/16 JPW

Equipment/WarcoMill/Training

2016-05-11T09:05:50Z

JonnyPW: /* Trained Users */

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.</b><br>
</div>

Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.

All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill.

[https://docs.google.com/document/d/13lQ4t1RRx7cGYytwD7E-Dg0Pstm2lZB0eKuCg8dDNyc/edit?usp=sharing Lesson 1 script]<br>
[https://docs.google.com/document/d/1mfN7JvnaYk4J8iicOznE8pkpWFN-kGCtKvgEWc73V5w/edit?usp=sharing Lesson 2 script]<br>
[https://docs.google.com/document/d/1b9cfFrsTvM1Xl9mLMjN1aBLy9p01ao8WE1qDZkrgZGI/edit?usp=sharing Lesson 3 script]<br>
[https://docs.google.com/document/d/1XtusHkKJt24aJodyJ5e330CRioY-CL3FWVzMMIiQjNI/edit?usp=sharing Lesson 4 script]

As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills]

== Owners ==

* Mat Cook
* Diana Probst
* Roger Smith

== Trainers ==

* Diana Probst
* Mat Cook
* Jonathan Waite
== Trained Users ==

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.

{| class="wikitable"
|-
! User!! Trained level !! Mill access
|-
| Diana Probst || --- || Trainer
|-
| Jonathan Waite* || --- || Trainer
|-
| Stevan Wing || Intro || Timed Out: start from beginning
|-
| Matthew Taylor || Initial Guide and Lesson A || Timed Out: start from beginning
|-
| Steve O || Initial Guide and Lessons A - C (conversion) || Continued teaching
|-
| John Sturdy* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Alper* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Evans* || Initial Guide and Lessons A - C || Continued teaching
|-
| Rob Rescorla* || Initial Guide and Lessons A - C || Continued teaching
|-
| Shareef Jalloq* || Initial Guide and Lessons A - C || Continued teaching
|-
| Robert Karpinski* || Initial Guide and Lessons A - C || Free to use
|-
| Marco Aita* || Initial Guide and Lessons A - C || Continued teaching
|-
| Stephen Harrison* || Initial Guide and Lessons A-C || Continued teaching
|-
| Mark Tillotson || Initial Guide and Lessons A-C || Continued teaching
|-
| Dave Horsnell* || Initial Guide and Lessons A-C || Continued teaching
|}

* indicates user has read and signed safe use document

Equipment/WarcoMill/Training

2016-04-17T15:47:07Z

JonnyPW:

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.</b><br>
</div>

Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.

All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill.

[https://docs.google.com/document/d/13lQ4t1RRx7cGYytwD7E-Dg0Pstm2lZB0eKuCg8dDNyc/edit?usp=sharing Lesson 1 script]<br>
[https://docs.google.com/document/d/1mfN7JvnaYk4J8iicOznE8pkpWFN-kGCtKvgEWc73V5w/edit?usp=sharing Lesson 2 script]<br>
[https://docs.google.com/document/d/1b9cfFrsTvM1Xl9mLMjN1aBLy9p01ao8WE1qDZkrgZGI/edit?usp=sharing Lesson 3 script]<br>
[https://docs.google.com/document/d/1XtusHkKJt24aJodyJ5e330CRioY-CL3FWVzMMIiQjNI/edit?usp=sharing Lesson 4 script]

As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills]

== Owners ==

* Mat Cook
* Diana Probst
* Roger Smith

== Trainers ==

* Diana Probst
* Mat Cook
* Jonathan Waite
== Trained Users ==

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.

{| class="wikitable"
|-
! User!! Trained level !! Mill access
|-
| Diana Probst || --- || Trainer
|-
| Jonathan Waite* || --- || Trainer
|-
| Stevan Wing || Intro || Use while supervised
|-
| Matthew Taylor || Initial Guide and Lesson A || Timed Out: start from beginning
|-
| Steve O || Initial Guide and Lessons A - C (conversion) || Continued teaching
|-
| John Sturdy* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Alper* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Evans* || Initial Guide and Lessons A - C || Continued teaching
|-
| Rob Rescorla* || Initial Guide and Lessons A - C || Continued teaching
|-
| Shareef Jalloq* || Initial Guide and Lessons A - C || Continued teaching
|-
| Robert Karpinski* || Initial Guide || Continued teaching
|-
| Marco Aita* || Initial Guide and Lessons A - C || Continued teaching
|}

* indicates user has read and signed safe use document

Equipment/WarcoMill/Training

2016-01-28T19:51:21Z

JonnyPW: /* Training */

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.</b><br>
</div>

Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.

All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill.

[https://docs.google.com/document/d/1KPPw1OwN7D-TMQzobgz16y-45bzThrTzN4ESXfJ-LtU/edit?usp=sharing Lesson 1 script]<br>
[https://docs.google.com/document/d/1mfN7JvnaYk4J8iicOznE8pkpWFN-kGCtKvgEWc73V5w/edit?usp=sharing Lesson 2 script]<br>
[https://docs.google.com/document/d/1b9cfFrsTvM1Xl9mLMjN1aBLy9p01ao8WE1qDZkrgZGI/edit?usp=sharing Lesson 3 script]<br>
[https://docs.google.com/document/d/1XtusHkKJt24aJodyJ5e330CRioY-CL3FWVzMMIiQjNI/edit?usp=sharing Lesson 4 script]

As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills]

== Owners ==

* Mat Cook
* Diana Probst
* Roger Smith

== Trainers ==

* Diana Probst
* Mat Cook
* Jonathan Waite
== Trained Users ==

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.

{| class="wikitable"
|-
! User!! Trained level !! Mill access
|-
| Diana Probst || --- || Trainer
|-
| Jonathan Waite* || --- || Trainer
|-
| Stevan Wing || Intro || Use while supervised
|-
| Matthew Taylor || Initial Guide and Lesson A || Timed Out: start from beginning
|-
| Steve O || Initial Guide and Lessons A - C (conversion) || Continued teaching
|-
| John Sturdy* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Alper* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Evans* || Initial Guide and Lessons A - C || Continued teaching
|-
| Rob Rescorla* || Initial Guide and Lessons A - C || Continued teaching
|-
| Shareef Jalloq* || Initial Guide and Lessons A - C || Continued teaching
|-
| Robert Karpinski* || Initial Guide || Continued teaching
|-
| Marco Aita* || Initial Guide and Lessons A - C || Continued teaching
|}

* indicates user has read and signed safe use document

Equipment/WarcoMill/Training

2016-01-28T19:50:18Z

JonnyPW: /* Training */

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.</b><br>
</div>

Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.

All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill.

[https://docs.google.com/document/d/1KPPw1OwN7D-TMQzobgz16y-45bzThrTzN4ESXfJ-LtU/edit?usp=sharing Lesson 1 script]
[https://docs.google.com/document/d/1mfN7JvnaYk4J8iicOznE8pkpWFN-kGCtKvgEWc73V5w/edit?usp=sharing Lesson 2 script]
[https://docs.google.com/document/d/1b9cfFrsTvM1Xl9mLMjN1aBLy9p01ao8WE1qDZkrgZGI/edit?usp=sharing Lesson 3 script]
[https://docs.google.com/document/d/1XtusHkKJt24aJodyJ5e330CRioY-CL3FWVzMMIiQjNI/edit?usp=sharing Lesson 4 script]

As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills]

== Owners ==

* Mat Cook
* Diana Probst
* Roger Smith

== Trainers ==

* Diana Probst
* Mat Cook
* Jonathan Waite
== Trained Users ==

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.

{| class="wikitable"
|-
! User!! Trained level !! Mill access
|-
| Diana Probst || --- || Trainer
|-
| Jonathan Waite* || --- || Trainer
|-
| Stevan Wing || Intro || Use while supervised
|-
| Matthew Taylor || Initial Guide and Lesson A || Timed Out: start from beginning
|-
| Steve O || Initial Guide and Lessons A - C (conversion) || Continued teaching
|-
| John Sturdy* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Alper* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Evans* || Initial Guide and Lessons A - C || Continued teaching
|-
| Rob Rescorla* || Initial Guide and Lessons A - C || Continued teaching
|-
| Shareef Jalloq* || Initial Guide and Lessons A - C || Continued teaching
|-
| Robert Karpinski* || Initial Guide || Continued teaching
|-
| Marco Aita* || Initial Guide and Lessons A - C || Continued teaching
|}

* indicates user has read and signed safe use document

Equipment/WarcoMill/Training

2016-01-28T19:47:22Z

JonnyPW: /* Trained Users */

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.</b><br>
</div>

Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.

All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill.

[https://docs.google.com/document/d/1KPPw1OwN7D-TMQzobgz16y-45bzThrTzN4ESXfJ-LtU/edit?usp=sharing Lesson 1 script]

As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills]

== Owners ==

* Mat Cook
* Diana Probst
* Roger Smith

== Trainers ==

* Diana Probst
* Mat Cook
* Jonathan Waite
== Trained Users ==

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.

{| class="wikitable"
|-
! User!! Trained level !! Mill access
|-
| Diana Probst || --- || Trainer
|-
| Jonathan Waite* || --- || Trainer
|-
| Stevan Wing || Intro || Use while supervised
|-
| Matthew Taylor || Initial Guide and Lesson A || Timed Out: start from beginning
|-
| Steve O || Initial Guide and Lessons A - C (conversion) || Continued teaching
|-
| John Sturdy* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Alper* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Evans* || Initial Guide and Lessons A - C || Continued teaching
|-
| Rob Rescorla* || Initial Guide and Lessons A - C || Continued teaching
|-
| Shareef Jalloq* || Initial Guide and Lessons A - C || Continued teaching
|-
| Robert Karpinski* || Initial Guide || Continued teaching
|-
| Marco Aita* || Initial Guide and Lessons A - C || Continued teaching
|}

* indicates user has read and signed safe use document

Equipment/WarcoMill/Training

2016-01-21T19:38:03Z

JonnyPW:

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.</b><br>
</div>

Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.

All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill.

[https://docs.google.com/document/d/1KPPw1OwN7D-TMQzobgz16y-45bzThrTzN4ESXfJ-LtU/edit?usp=sharing Lesson 1 script]

As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills]

== Owners ==

* Mat Cook
* Diana Probst
* Roger Smith

== Trainers ==

* Diana Probst
* Mat Cook
* Jonathan Waite
== Trained Users ==

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.

{| class="wikitable"
|-
! User!! Trained level !! Mill access
|-
| Diana Probst || --- || Trainer
|-
| Jonathan Waite* || --- || Trainer
|-
| Stevan Wing || Intro || Use while supervised
|-
| Matthew Taylor || Initial Guide and Lesson A || Timed Out: start from beginning
|-
| Steve O || Initial Guide and Lessons A - C (conversion) || Continued teaching
|-
| John Sturdy* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Alper* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Evans* || Initial Guide and Lessons A - C || Continued teaching
|-
| Rob Rescorla* || Initial Guide and Lessons A - C || Continued teaching
|-
| Shareef Jalloq* || Initial Guide and Lessons A - C || Continued teaching
|-
| Robert Karpinski* || Initial Guide || Continued teaching
|}

* indicates user has read and signed safe use document

Equipment/WarcoMill/Training

2016-01-08T17:00:22Z

JonnyPW: /* Trained Users */

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.</b><br>
</div>

Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.

All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill.

As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills]

== Owners ==

* Mat Cook
* Diana Probst
* Roger Smith

== Trainers ==

* Diana Probst
* Mat Cook
* Jonathan Waite
== Trained Users ==

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.

{| class="wikitable"
|-
! User!! Trained level !! Mill access
|-
| Diana Probst || --- || Trainer
|-
| Jonathan Waite* || --- || Trainer
|-
| Stevan Wing || Intro || Use while supervised
|-
| Matthew Taylor || Initial Guide and Lesson A || Timed Out: start from beginning
|-
| Steve O || Initial Guide and Lessons A - C (conversion) || Continued teaching
|-
| John Sturdy* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Alper* || Initial Guide and Lessons A - C || Continued teaching
|-
| Ben Evans* || Initial Guide and Lessons A - C || Continued teaching
|-
| Rob Rescorla* || Initial Guide and Lessons A - C || Continued teaching
|-
| Shareef Jalloq* || Initial Guide and Lessons A - C || Continued teaching
|-
| Robert Karpinski* || Initial Guide || Continued teaching
|}

* indicates user has read and signed safe use document

Equipment/WarcoMill/Training

2015-11-12T19:41:45Z

JonnyPW: /* Trained Users */

Equipment/WarcoMill/Training

2015-10-01T14:49:43Z

JonnyPW: /* Trained Users */

Equipment/WarcoMill/Training

2015-10-01T14:17:05Z

JonnyPW: /* Training */

Equipment/WarcoMill

2015-10-01T14:15:13Z

JonnyPW: /* Instructions */

{{RedTool}}

[[Equipment|Equipment]] / Warco Mill

[[File:warco_mill.jpg|thumb|460px|right|Warco Mill]]

= Summary =
(This machine has been purchased but not yet opened to users.)

The Warco mill can be used to machine objects from a wide range of materials. Training is required before members use the equipment because it is easy for users to damage it, and serious injuries, or fatalities, are possible. The machine has a table 660 x 152mm that can move 37cm in the X direction, 15cm in the Y and 34cm in the Z direction.

== Owners ==
* Diana Probst
* Mat Cook
* Roger Smith

== Health and Safety ==
* Power supply to be disconnected when changing tools.
* All cutting tools to be kept in their holders until they are required.
* Waste material/offcuts to be kept clear of work area.
* Equipment will be checked for defects before each use to minimise the risk of possible electrical faults or fire.
* Carbon Dioxide extinguisher to be available for any electrical fires
* Eye protection to be worn when using the equipment.
* Risk assessment: https://docs.google.com/viewer?a=v&pid=forums&srcid=MDgwNzUyNzQ4MjA0NjE0MDY2NDIBMTU4NTI2NjEyMjIzOTU5MDkyODQBdmpubUpFanBkTklKATAuMQEBdjI

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.</b><br>
</div>

To get the required training to become an approved operator please contact one of the owners.

The owners will help users make the best use of the mill but it must be emphasised that learning to take full advantage of all its capabilities takes months of practice. The owners have limited time so members will need to take responsibility for much of their own training. More details about the training can be found at

* [[Equipment/WarcoMill/Training|Mill Training]]

== Instructions ==

The feeds and speeds spreadsheet introduced in training is available [https://docs.google.com/spreadsheets/d/1rgAgFnwFIsTOK6a2bODYmkc9voaACjGkP0-nbXctfU0/edit?usp=sharing here].

== Tips & Tricks ==

Use a conventional milling cut to get the part to approximately the final size. With a conventional cut the cutting surface and the work piece are moved in opposite directions. A climbing cut is where the cutting surface and the work piece are moved in the same direction. It produces a better finish but puts extra strain on the cutting tool AND IS MORE LIKELY TO BITE, TAKE UP THE BACKLASH, BITE FURTHER AND BREAK THINGS. Therefore only use conventional (opposing directions) cutting. (Climb cuts are only to be used for very small finishing pass operations, usually not in steel, where tool biting is not a concern).

When drilling, start with a spotting drill (centre drill at a push) to make sure that the hole starts exactly centre. It is usually OK to drill to a depth of 3 to 4 diameters in a single pass (less with a centre drill). After that withdraw the drill every diameter of cutting depth to clear the swarf. Use cutting fluid beyond a depth of about 2 diameters (and always in steel). Be aware that halving the diameter of a drill reduces its strength 8 fold. Small drills break very easily and broken tools present a hazard and are exceptionally difficult to remove. Much much less pressure is needed to drill small diameter holes. Use just enough pressure to create long curly chips. Look up the appropriate rotation speed for the drill. The Warco cannot spin fast enough for drills below about 2mm.

== Maintenance ==

* Clean away all swarf at the end of a work session with a brush or vacuum. Do not blow because this can send chips where they can damage the machine. Bare hands are very easily injured by the sharp surfaces.

== Further Information ==

Specification: [http://www.warco.co.uk/Warco%20Brochure.pdf]

Spindle: 3MT (we have the 3MT version). This is NOT compatible with the ML7 lathe headstock which is 2MT.

Equipment/WarcoMill/Training

2015-09-15T10:49:56Z

JonnyPW: /* Trained Users */

Suppliers

2015-04-23T18:48:21Z

JonnyPW:

Places to buy things

Self populated

=Electronics=
See [[Equipment/Electronics_Workbenches]]
*[http://uk.farnell.com/ Farnell]
*[http://cpc.farnell.com/ CPC]
*[http://uk.rs-online.com/ RS Components]
*[http://www.rapidonline.com/ Rapid Electronics]
*[http://www.coolcomponents.co.uk/ Cool Components]
*[http://www.hobbytronics.co.uk/ HobbyTronics]
*[http://www.hobbyking.com/ HobbyKing]
*[http://proto-pic.co.uk/ Proto-Pic]
**Reseller of Sparkfun & Adafruit.
*[http://skpang.co.uk/ SKPang]
*[http://www.technobotsonline.com/ Technobots]
*[http://www.phenoptix.com/ Phenoptix]
*[http://www.kitronik.co.uk/ Kitronic]
*[http://www.maplin.co.uk/ Maplin]
*[http://www.active-robots.com/ Active-Robots]
*[http://www.gimsonrobotics.co.uk/ Gimson Robotics]
*Ragworm

==Non-EU==
NOTE: These shops will charge a lot for postage, Customs and VAT.
*[http://www.newark.com/ Newark]
*[http://www.digikey.co.uk/ Digikey]
*[http://sparkfun.com/ Sparkfun]
*[http://www.adafruit.com/ Adafruit]
*[http://www.tindie.com/ Tindie]
*OSHPark

=Materials=

==Metals==
*[http://www.beltingonline.com/ Belting Online]
*[http://www.bearingboys.co.uk/ Bearing Boys]
*[http://simplybearings.co.uk/ Simply Bearings]
*[http://www.bearingstation.co.uk/ Bearing Station]
*[http://budgetbearings.co.uk/ Budget Bearings]
*[http://www.kjnltd.co.uk/ KJN]
** "Highly recommended" - Mat C
*[http://www.motedis.co.uk/ Motedis]
**If you want to ask them anything, speak to Kris at kb@motedis.co.uk
*[http://uk.misumi-ec.com/ Misumi]
**Call for best results
*Igus
**Difficult to buy from
*[http://www.metallin.co.uk/shop/ Metallin]
*[http://www.worldofcnc.com/ World of CNC]
*[http://metals4u.co.uk Metals4U]
** Good selection, happy to do small quantities. Delivery is fast. --[[User:Tomoinn|tmo]] 12:48, 16 March 2014 (UTC)
*[http://www.westfieldfasteners.co.uk/ Westfield Fasteners]
** Excellent for bolts, machine screws, nuts etc. Really good turnaround, prices based on amount you buy but with an excellent interface to make this clear. Limited range of things, but if you're looking for things to attach one thing to another thing they're great. --[[User:Tomoinn|tmo]] 12:48, 16 March 2014 (UTC)
*[http://www.mackay.co.uk/Metals-Warehouse.html Mackay], our local Cambridge hardware shop stock and cut metals --[[User:Ennui2342|Ennui2342]] 09:56, 24 March 2014 (UTC)

==3D Printer==
*[http://www.2engineers.com/ 2Engineers]
**Do ceramic hotends and low weight, high torque motors

==Wood==
* [http://www.ridgeons.co.uk/ Ridgeons] (Builders' Merchants) have two branches in Cambridge, at least the northern one (Nuffield Road) sells timber, I've not tried the other one

==Plastic==
*[http://www.edplastics.co.uk/ Engineering & Design Plastics]
** Used these guys to buy heavy acrylic extrusions, they also do bending and custom manufacture.--[[User:Tomoinn|tmo]] 12:59, 16 March 2014 (UTC)
*[http://www.ema-models.co.uk/ EMA Models]
** Range of architectural modelling stuff, in particular some unusual extrusion and cast acrylics.--[[User:Tomoinn|tmo]] 12:59, 16 March 2014 (UTC)
*[http://www.technologysupplies.co.uk/ Technology Supplies Ltd.]
** I bought the food-grade plastic I used for chocolate moulds from these folk. Very helpful and friendly bunch.--[[User:Kim SJ|Kim SJ]] 20:38, 17 March 2014 (UTC)

==Composites==
*[http://www.easycomposites.co.uk/ Easy Composites]
** Excellent range of carbon fibre cloth, rods, sheets, tubes etc. Expensive (but no more than anywhere else) but happy to supply small quantities and excellent shipping speed. Use when you really need to save weight in your projects! --[[User:Tomoinn|tmo]] 12:55, 16 March 2014 (UTC)

==Jewlery/Glass==
See [[Equipment/Fine_metalwork_bench#Consumables_and_Stock_.28to_pay_by_use.29 | Fine metalwork Bench Consumables and Stock]].
*[http://www.warm-glass.co.uk/ Warm Glass]
** I have an account with these guys and, due to buying the kiln on it, we get a 5% discount. I'm happy to put orders in as long as we combine them to over 75 pounds for shipping. If you do this you don't get the discount, but the money we save goes to common stock needed for the glassworking station such as bead release. --[[User:Tomoinn|tmo]] 12:52, 16 March 2014 (UTC)
*[http://off-mandrel.com/ Off Mandrel]
** Used for the few things Warm Glass doesn't sell.--[[User:Tomoinn|tmo]] 12:52, 16 March 2014 (UTC)

==Art and Crafts==
*[http://www.tiranti.co.uk/ Tiranti] - suppliers of sculpture, mouldmaking and casting supplies - physical store at Warren Street --[[User:Ennui2342|Ennui2342]] 09:46, 24 March 2014 (UTC)
*[http://www.origami-shop.com Origami Shop] - Origami papers --[[User:Ennui2342|Ennui2342]] 09:54, 24 March 2014 (UTC)

==Optical==
*It's a bit obscure, but should you be after a beam splitter (half mirrored mirror type) [http://www.scientificmirrors.com/ Scientific Mirrors] were very helpful

=Misc=
*[http://www.ebay.co.uk/ eBay]
*[http://amazon.co.uk/ Amazon]
*[http://www.aliexpress.com/ AliExpress]
*[http://www.alibaba.com/ Alibaba]
*[http://www.buyspares.co.uk/ Buys Spares]
* David Neats curated list of UK suppliers for [http://davidneat.wordpress.com/suppliers-2/suppliers/ model making] --[[User:Ennui2342|Ennui2342]] 09:46, 24 March 2014 (UTC)

=Tools=
==Hand==
==Powered==

===CNC Model Mill===
See [[Equipment/CNC_Model_Mill#Material_.26_Tooling_Suppliers | CNC Model Mill Material & Tooling Suppliers]].

=Services=
See [[Service_Suppliers]]
This page is for companies providing services for things that we can't do in-house.

*[http://www.wedge-galv.co.uk/Acrow_Galvanizing.aspx Acrow Galvanizing] are the nearest hot-dip galvanizers AFAIK. (I don't think we're planning to get a `kettle' of hot zinc in Makespace itself.)
*[http://www.mackay.co.uk/ Mackay]
*[http://www.facebook.com/WELDDONEcustomfabrication WeldDone]
** Local TIG welder with 7+ years of experience, fully recommended. --[[User:Pinski1|Pinski1]] 14:53, 2 April 2014 (BST)
*[http://www.mfg.com/ MFG]
**Chinese manufacturing portal, not used yet.
*[http://www.h2oprofiling.co.uk/ H20 Profiling] Reasonably local and helpful water-jet cutting, no minimum order (often £100) --[[User:JonnyPW|Jonny Waite]]

Equipment/3D Printer

2015-01-21T12:10:21Z

JonnyPW: /* Trainers */

{{RedTool}}

[[Equipment|Equipment]] / 3D Printer

= Introduction =
3D printing is a way of creating small, custom objects from plastic filament. The printer melts the filament, held on a spool, and prints with it to create 3D structures. Makespace has two 3D printers, an UP! and a Makerbot Replicator 2X. Currently, the Makerbot is the only printer working in the space. The UP! is out of action until it can be fixed by the owners (needs new electronic components).

== Owners ==

The Owners are those nominally in charge of the equipment, organising its maintenance, training others to use it, and generally being a point of contact.

The current Owners of the 3D printers are:

* [[User:Kim_SJ|Kim Spence-Jones]]

If you have any questions, problems or concerns around the 3D printer, these are the people to contact.

== Trainers ==

The Trainers are not in charge of maintaing equipment, but have been more thoroughly instructed in its use and can train others. They may run extra classes for recently trained learners.

The current Trainers for the 3D printers are:

*[[User:HannahWray|Hannah Wray]]
* Peter Knight
* James Hutton
*[[User:Pinski1|Robert K.]]
* Jonny Waite

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>YOU CAN ONLY USE THE 3D PRINTER IF YOU HAVE BEEN TRAINED</b><br>
and have been added to the [[Equipment/3D Printer/Training#Trained_Users|Trained Users]] list by one of the Owners or Trainers
</div>

To get trained on the 3D Printer and be added to the qualified user list, you will need to arrange for a training session with one of the 3D Printer Owners.

If you'd like to arrange training, please see:
* [[Equipment/3D Printer/Training|3D Printer Training]]

Note that persons who were previously trained on the UP! are allowed to use the Makerbot after reading its manual. See https://s3.amazonaws.com/downloads.makerbot.com/replicator2x/MakerBot_Replicator_2X_User_Manual.pdf

== General Health and Safety ==

The 3D printers are excellent tools for either making small parts, or rapid prototyping. At the same time it is an expensive tool with a (small) risk of injury and fire, so is very important you know how to use it to avoid damaging yourself and the machine. The 3D printer is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the 3D printers are:

* '''ONLY USE THE 3D PRINTER IF YOU HAVE BEEN TRAINED'''
* '''ONLY USE THE 3D PRINTER IF YOU HAVE READ THE INSTRUCTIONS'''
* '''NEVER LEAVE THE PRINTER RUNNING UNATTENDED'''

As a responsible user, you should be very aware of the following risks and how to deal with them:

'''HEAD CRASH''' - incorrect calibration could cause the nozzle to hit the platen at job start
* Calibration must be carefully checked on each startup

'''TRAPPING''' - The head and bed of the machine are moved by programs in the machine's memory.
* Be careful when near the machine, it will possibly move even if the PC is off
* Ensure you are familiar with the 'pause' and 'stop printing' functions on the Makerbot so that in an emergency you can quickly halt printing.

'''BURN RISK''' - the platen on the printers are heated, and will reach temperatures up to 253 degrees during a print run which could cause skin burns. The extrusion nozzles also get very hot. Do not touch either of these areas while printing, and keep the Makerbot's guard door securely closed while printing.
* Be careful when the machines have recently been used, as they may still be hot enough to burn.

'''ELECTROCUTION''' - as with all mains powered devices there is a small risk of danger from exposed wires. Always do a manual check that the wiring is safe, no cores are exposed or wires trapped.

== Plastics used in the printers ==

The 3D printers can print with two different plastics, PLA and ABS. PLA has a much lower melting point than ABS, so all temperature settings for the printer need to be changed if you are switching between plastics. Normally ABS is what we would reccomend printing in: it is more durable and strong.

Telling the difference between the plastics is fairly simple: if you take a piece of the PLA filament between your fingers you can break it off and snap it easily - it is brittle. When you try to break off a piece of ABS, it bends and the filament starts to go white, not breaking straight away.

The ABS can be found on the shelves above the 3D printers, the small amount of PLA can be found in the lower down orange drawers (marked PLA).

= Makerbot Replicator 2X 3D Printer =
==Gallery of 3D printed things in Makespace using Replicator 2X==
<gallery>
File:Unicorn Horn.jpg|unicorn horn http://www.thingiverse.com/thing:83012
File:Dremel Turbine.jpg|Dremel turbine http://www.thingiverse.com/thing:13188 <br />Watch the turbine in action on [https://www.youtube.com/watch?v=kQ66rMH4eZQ YouTube]
File:Ying Yang Cylinder.jpg|Yin Yang cylinder http://www.thingiverse.com/thing:22682
File:Ying Yang.JPG|Ying Yang proper http://www.thingiverse.com/thing:22764
File:Trefoil Knot.jpg|trefoil knot http://www.thingiverse.com/thing:577364
File:TrifoilKnotTwoI.JPG|trefoil knot II http://www.thingiverse.com/thing:387146
File:2_color_cube_2.JPG|2 color cube http://www.thingiverse.com/thing:562955
File:3D twirl.jpg|3D twirl http://www.thingiverse.com/thing:604403
</gallery>

This is the Makerbot Replicator 2X, currently the only 3D printer working in the space. There is a dedicated PC next to it with the MakerWare software used to drive it. MakerWare can import STL design files (eg. from Thingiverse) for printing. The manual for this printer can be found here: https://s3.amazonaws.com/downloads.makerbot.com/replicator2x/MakerBot_Replicator_2X_User_Manual.pdf

== Specific Safety Tips ==

There is a burn hazard from the nozzles and the heated platter, as mentioned above. The Makerbot will display its current temperatures for you if you use the arrow keys to navigate on its small display (see manual). The platter may also move unexpextedly. Do not open the front hatch or lift off the top transparent cover during printing. ABS fumes over a long period may be harmful - if you feel light-headed take a break in a well ventillated area.

Don't let the machine run unattended - you don't need to watch a print constantly but keep an eye on it and always remain in the same room. Possible problems that would require you to pause or stop the machine include filament getting wrapped around the spool holder at the back and sticking, and a software crash on the PC. If you're unsure of a situation you can always pause your print and restart it.

Always switch the printer off at the back when you are finished.

== Avoiding Damage to the Machine ==

The bed is covered with Kapton tape. This green, shiny tape is very fragile and expensive to replace and so you MUST NOT use a knife, scraper or other sharp object to remove your finished models. Use your hands only, or the plastic scraper with the Makerbot logo on in the red box as a last resort. Often, models will easily come free once the bed is allowed to cool, so give it 10 minutes and try again before resorting to this.

The kapton tape needs to be kept clean so that plastic extruded onto it has a nice base finish and sticks well. If you notice smears or marks on the tape give it a gentle clean with a dry cloth from the red box on the shelf. Make sure your hands are clean and not greasy before you touch the platen or try to remove printed objects from it.

If you do damage the tape, please let the owners know as soon as possible. The owners group email address is on the sign on the side of the machine.

== Using SD cards with the Makerbot ==

We would recommend driving the Makerbot directly from the dedicated software on the PC next to it. If you want to use an SD card, it is very fussy. SD cards have to be PHYSICALLY 2GB or smaller (formatting a big card small doesn't work). They also have to be formatted in FAT16 (mostly Linux machines do this most easily). There is a small card formatted this way, currently in the slot of the printer free to use. It's labelled "MAKESPACE"; please don't absent-mindedly take it away! The SD card should contain .thing files to print from.

== Loading and Unloading ==

You will notice there are two print heads for this printer, driven by two separate spools of plastic on different axles.

When you want to change spools, either to change colour or because a spool has nearly run out, follow these instructions, found on page 31 of the Manual. Go there if you have any questions about detail or need further instructions with illustrations. https://s3.amazonaws.com/downloads.makerbot.com/replicator2x/MakerBot_Replicator_2X_User_Manual.pdf

If you need to unload the MakerBot Filament, the LCD menu will walk you through the process. To run the script for unloading the filament from either extruder, go to the LCD panel and select Utilities > Filament Options > Unload (specify left or right). The LCD menu will walk you through the process. You will need to first remove the transparent lid to access the filament tubes. Be patient - yanking at the filament before it is ready to be removed may leave residue inside the extruders which is VERY DIFFICULT TO REMOVE.

When you are ready to load a fresh filament, the menu will walk you through the process. There is no need to worry about allowing extra printing to change colours fully afterwards because you'll print a test strip during changeover that does that. There is a step of 'cut off lump' which means you'll need to use the wire cutters provided to snip away this excess lump of test printed material.

It is very important to make sure your spools are running in the correct direction. Ensure that the filament mounted on the right spool holder [when viewed from the back] unspools clockwise and that the filament mounted on the left spool unspools counterclockwise. Refer to the diagram you were shown during training, or to the manual.

Also beware of wrapping round axle - sometimes the spools can get misaligned and filament ends up tightening and wrapping around the axle. This is very dangerous and printing should be stopped straight away to correct it. There is more of a danger of this happening if the spools are set up incorrectly.

If you are changing between PLA and ABS you also need to change the temperature settings of the machine, since PLA will burn at the temperatures used for ABS, and ABS will not print at PLA temperatures.

== Printing ==

The printer always extrudes a test line along the front of the bed first. Make sure to remove this when you remove your print, and that your print location doesn't clash with it.

Preheating the bed is helpful but not necessary - it will save you time. The printer will not print until the bed has heated up enough. You can select the left and/or right extruders to heat up as well. If you are only printing with one material, just select that extruder. Go to Utilities > Preheat > Start Preheat

If a model is stuck, wait for the bed to cool - often they will come away very easily once cooled enough. Otherwise apply a gentle twisting action manually. As a last resort, use the plastic MakerBot branded paddle to scrape it away from the bed. Do NOT use metal knives - they will damage the kapton bed.

Keep an eye on it. prints can go strange half way! Be ready to pause or stop while printing. You can find those options by pressing the left arrow while printing. You can always pause a print if you are uncertain - as long as you resume it within a couple of minutes, this shouldn't alter your final result.

== Levelling ==

This is not often needed. The symptoms of unlevelness are:

- first layer too thin or varying thickness
- part not sticking

In the worst case: the print head ends up touching the bed - HEAD CRASH. This is bad news. Level the bed before this stage is reached!

To level the bed, go to Utilities > Level Build Plate. There are 3 screws underneath the build plate - see p23 of the Manual for a diagram on where they are located. The MakerBot software will guide you through the process of adjusting them to level the plate. The ideal to aim for is that a piece of paper should *just* slide through the gap between the extruder nozzle and the plate in each location.

Be careful not to damage kapton tape while doing this!

== Software ==

The software used with the MakerBot 2X is called MakerWare. It is well documented in the Manual and there are many online tutorials for its use, so we will not go into detail here.

Some tips on our experience with the software:

If there seems to be an unspecified software problem/crash, try selecting Services > Restart Background Service. This resets the connection to the printer. Don't do this while printing.

Edit > Settings lets you select which plastic you have loaded into each extruder. You need to change this each time you load new plastic. When switching to PLA make sure to change the temperature profile here as well as switching colours.

The Make button gives you settings for supports (colour matched is best), whether to have a raft (generally not needed), and resolution (standard is best). For a general guide, 4 shells with layer height h = 0.2mm generally works well. Experiment with infill settings - 15% is generally fine.

== Multicolour ==

Can't do scaffolding and multicolour - This is not true anymore, we think.
Issues with mixed materials. It might seem like a good idea to use a PLA scaffold for an ABS piece and then dissolve away the PLA in hot water, but this is in fact very difficult. It's better to think about scaffolding with weaker pieces of the same plastic, or changing a piece's orientation.

== Other Details ==

Don't leave the room while printing! The printer is very expensive and you don't want to have to explain the lump of plastic stuck to a now-unusable extruder is your fault. Play it safe, keep an eye on your prints.

You need to pay for your prints once you have made them. The current rate is 10p/gram of material used - use the little scales on the shelves on top of the printer area to weigh your finished prints.

== Hardware Updates ==

The drive blocks on both extruders are OEM, and are known to have problems with filament feeding. They are also unable to work with NinjaFlex 3D Flexible Printing Filament, of which we now have a roll. Several 3D printable repacement drive blocks are available. one of them from Makerbot. The most useful for our purposes is the "Replicator 2X Extruder Drive Block Upgrade", thingiverse #222667.

This has been printed, and all of the hardware assembled with one exception: the tension spring. In testing, the new drive block works well, BUT the spring does not provide sufficient tension. The recommended spring is from McMasters in the US (see http://www.thingiverse.com/thing:222667 for details), and we have been unable to source a cost-effective alternative in the UK. So for now, this update project is stalled. If someone wants to take on the task of finding a suitable spring, the drive block parts are on the shelf above the printer, and there is a note attached with details and contacts.

= Using the UP! 3D Printer =
[[File:Up_3d_printer.jpg|thumb|left]]

This is the UP! (a slightly older version of [http://www.coolcomponents.co.uk/catalog/plus-personal-portable-printer-p-644.html the device currently available]).
The dedicated PC next to the printers is running win7 and UP! software. It can import STL design files from Google sketchup. At the moment the UP! is out of action.

== Instructions ==

To use the printer you must familiarise yourself with the safety notes above and read the following instructions.

[[File:3d printer desktop.png|Desktop showing Up! software link|thumb|right]]
'''Power Up'''

# Give the machine a quick visual check. '''Make sure that there is nothing left on the platen.''' Remove the platen support piece from under the platen and gently lower it. '''Check the new material is feeding OK and the reel has enough on it'''
# Turn on the machine at the wall socket
# Initialise the machine - Open the 'Up!' software on the attached PC and double-click the software icon. Once it has loaded select '3D Print > Initialise' from the toolbar

[[File:3d printer maint.png|Maintenance dialog|thumb|right]]
'''Check calibration'''

This operation must be carried out to ensure the bed is level and has the height correct.

# Firstly find the current value of the nozzle height in the print dialog. This is only accessible once you have a design loaded, so load a model in (there should always be some in the '3D Printer Training' folder on the desktop) and then select 'Print' from the toolbar
# Note the printhead height from this dialog (currently 139.1) and press cancel to abort
# Go to the maintenance dialog (3D Print > Maintenance from toolbar) and set the head height to 20mm less than this height. Enter the value in the edit box and press 'To:' button
# Then move the bed closer to the expected value, in decreasing steps, until you reach the set height or the nozzle is going to hit the bed. If you reach the specified height (currently 139.1mm) there should just about be room to get a piece of paper between the nozzle and the bed.
# Once this has been checked you should drop the head to about '100' and then repeat the check at two other corners and the centre. When the platen is well below the head you can quickly go to the other locations using the FL/FR/NL/NR/Center buttons on the maintenance dialog

'''Load your Design'''

# Import your model - press the 'Open' icon on the ribbon bar
# Check the placing and size of your model - the printer software is quite clever, but it may not choose the best orientation of complex shapes. You want the largest flat surface on the bottom, so that less support material is required.

[[File:3d printer startup dlg-crop.png|Print confirmation dialog|thumb|right]]
'''Download to the Printer'''

# When you are ready to print you can just press the 'Print' button on the ribbon bar
# Some calculations now take place and a popup box will appear with an estimate of how much material will be required as well as how long printing will take - please check 3D Printer Material Cost table and put your money in the honesty box<br />     Worried whether there's enough filament left for your job? As a rule of thumb, one turn of the material drum is about 1g of material.
# If you are happy then make a note of the material weight and check the cost against the table below
# Press 'OK' to proceed
# Watch the magic happen ...

<span style="color:red">'''DO NOT EVER LEAVE THE PRINTER UNATTENDED'''</span>

'''Finishing'''

# When the part is finished the printer will make several beeps - but of course you will be watching so you will be expecting that
# DO NOT TOUCH THE PLATEN YET ! It is usually very hot, and it is best to give it a few minutes at least
# When it has cooled a little then with care you can peel the part away from the platen
# The 'raft' which was built to produce the part on should then separate with a little effort, and possibly careful peeling with a blade

'''Power Down'''

# Lower the platen to its rest position before turning off. Do this from the maintenance dialog (3D Print > Maintenance from the toolbar) and press 'To Bottom'
# Turn off the printer on the wall socket
# Gently lift the platen and put the platen support piece back underneath
# Shut down the PC and double check that everything is left in a safe and clean state for the next user

'''Cost'''

Currently we charge 10 pence per gram for prints, this is to cover the cost of material plus a little for wear and tear and other consumables. You can weigh printed parts using the scales next to the blue honesty box. Please put your money into the blue labelled honesty box on the shelf above the printer.

= Maintenance =

The maintenance of the 3D printer is carried out by the Owners, with some basic maintenance being carried out by Users on every job.

== Maintenance Schedule ==

Continuous Maintenance ('''Every job, done by all 3D Printer Users''')
* Clean the platen of any plastic remnants
* Check the new material is feeding OK and the reel has enough on it

Basic Maintenance (Every week, done by 3D Printer Maintainers)
* Check the security and condition of all cabling
* Check the UP! platen coating and re-paint any areas if necessary (green paint is in a pot with the printer)

Full Maintenance (Every 4 weeks, done by 3D Printer Maintainers)
* Tasks as per Basic Maintenance, plus
* Strip coating off UP! platen and re-paint with a fresh coat
* Calibration check, if issues have been reported

== Maintenance Log ==

'''Reactive Maintenance'''
* None

'''Regular Maintenance'''
* Week Number, Date, Type, Owner (Notes)

2013
* Week 08, February 18, Simon Stirley (Re-painted holes in platen coating)
* Week 09, February 25,
* '''Week 10, March 4, '''
* Week 11, March 11, Simon Stirley (checked wiring, posted safety notice, re-painted platen holes)
* Week 12, March 18,
* Week 13, March 25,
* '''Week 14, April 1,'''



== Maintenance Shopping List ==

* TBD

= Further Information =
== Manual ==
The manual is installed in the machine attached to the printer and also available here: [http://makespace.org/wiki/images/5/5d/Up_plus_user_manual-v3.0.pdf Manual]

== Repairs ==

We expect to have to change the following parts for general maintenance:
* TBD

Maintenance and Spares:
* One UK supplier of consumables is [http://www.coolcomponents.co.uk/catalog/consumables-c-89_98.html Cool Components]

* www.shop.3dfilaprint.com/ 5% Discount code is: cambmake



== Software ==

You can download Quickstart manual and latest driver software from [http://www.pp3dp.com/index.php?option=com_jdownloads&view=viewcategories&Itemid=89 pp3dp].

* [http://sketchup.google.com/ Google SketchUp] with STL plugin as below
** [http://www.guitar-list.com/download-software/convert-sketchup-skp-files-dxf-or-stl This plugin] seems to work quite well. Use 'File/Export to DXF or STL' from Sketchup once you have installed it and select 'STL' as the last item in the type list when asked
* [http://www.netfabb.com/ NetFabb] repairs any incomplete STL files
* [http://meshlab.sourceforge.net/ Meshlab] is a good free program (Sourceforge) for visualising and modifying STL files
* [http://www.openscad.org/ OpenSCAD] is a script-based modeller ('3D compiler'), well-suited for technical CAD (less so for artistic design)

Equipment/3D Printer/Training

2015-01-21T12:09:23Z

JonnyPW: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/3D Printer|3D Printer]] / Training

= 3D Printer Training =

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

== Booking ==

This is no longer handled here on the wiki.

For discussing and arranging slots, please use the mailing list thread
[https://groups.google.com/forum/#!searchin/cammakespace/training/cammakespace/-mfP-5cif6g/-jGHstuHXJQJ]. New training sessions will be announced on the Meetup group.

Notes:
* You can only be trained if you have RSVP'd to a Meetup session

= Trained Users =

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

* Chris Abri
* Rachel Rayns
* Tom Ingham
* Paul Osborn
* Moin Ali
* Andy Fisher
* Edward Imhagwe
* Yi Wei
* Errol McMullen
* Mark Watson
* Catarina Violante
* Maciek Piatek
* Adrian van den Heever
* Brian Corteil
* Rod Williams
* Peter Provis
* Ben Evans
* Roeland Schumacher
* Archie Reid
* Adrian Carr
* Ward Hills
* Paul Holland
* Pop Sharma
* Patrick Greaney
* Kevin Latter
* Martin de Selincourt
* Alexis Mather
* Andrew Dunn
* Hannah Wray
* Anne Harrison
* Ben Alper
* Ajith Shadakshari
* Mark Mellors
* Toby Moncaster
* Alan Tennant
* Jake Young
* John Sturdy
* David Bebb
* Ben Wheatley
* Diana Probst
* Richard Mitchell (mandatory only)
* Christie Nel (mandatory only)
* Andrew Lipson (mandatory only)
* Toby Roberts (mandatory only)
* Dan Tidhar
* Jennifer Herbert
* Matthew Ireland
* Harry Braviner
* Saar Drimer
* Robert Hoff
* Daniel Garden
* Armando Carlone
* Marcin Izo
* James Hutton (mandatory only)
* Anthony Wainman (mandatory only)
* Jia Wei Lim (mandatory only)
* Julius Schmidt (mandatory only)
* Hazel Jenkins (mandatory only)
* Benjamin Kidder (mandatory only)
* Joshua Keeler (mandatory only)
* Simon Birrell (mandatory only)
* John Simm (mandatory only)
* Theo Sanderson (mandatory only)
* Jon Aas (mandatory only)
* Stephen Jeapes (mandatory only)
* Anna Stoilova (mandatory only)
* Jim Dilks (mandatory only)
* Katia Dilks (mandatory only)
* Aleksandar Tomic (mandatory only)
* Gaye Saykok (mandatory only)
* Fergus Riche (mandatory only)
* David Barham (Mandatory only)
* Marco Aita (Mandatory only)
* Jason White (Mandatory only)
* Brian Starkey (Mandatory only)
* David Cox (Mandatory only)
* Matt Grimes (Mandatory only)
* Tim Regan (Mandatory only)
* Stuart Wilson (Mandatory only)
* Andy Spencer (Mandatory only)
* Ester Leighton (Mandatory only)
* Richard Fosh (Mandatory only)
* Peter Knight
* John Campbell
* Arun Rao
* Peter Mottram
* Marcin Zaba
* Jon Green
* Dave Potts
* Reid Potts
* Mark Roberts
* Piccardo Gheradi
* Edward Imhagwe
* Robert Hogg
* Michal Stefanow
* Charlie Stokes
* Leo Impett
* Patrick Wollner
* Patrick Baigent
* Kate Aston
* Shelagh Shepherd
* Damien Guihen
* Paul Edgington
* Wayne Keenan
* Liza Read
* David Horsnell
* Emyr James
* Francisco Cordobes Aguilar
* Nicola Powys
* Jia Wei Lim
* Sonya Sireau
* Andrew Gale
* Andre Powell
* Tom Myers
* Hidde-Jan Lemstra
* Mark Cheverton
* Robert Karpinski
* Alex Wortley
* Jason Holloway
* Alex Holloway
* Mat Cook (1/5/2014)
* Toby Norman (1/5/2014)
* Toby Bunting (1/5/2014)
* Rob Voisey (1/5/2014)
* Joe Tapply (1/5/2014)
* Carl Phillips (1/5/2014)
* Alberto Santos (6/5/14)
* Owen McAree (6/5/14)
* Eric Jones (6/5/14)
* Martin Hollis (8/5/14)
* Mark Tillotson (8/5/14)
* Neil Tan (8/5/14)
* Mat Greenwood (8/5/14)
* Alex Atkinson (15/5/14)
* Al Napp (15/5/14)
* Ian McFarlane (15/5/14)
* Michael Dales (20/5/14)
* Lihua Han (20/5/14)
* Rick Lupton (20/5/14)
* Stephen Woodhead (20/5/14)
* Tim Rower (20/5/14)
* Kristof Klos
* Antony Quinn
* Thomas Keller
* Matthew Taylor
* Shashank Srinivasan
* Milosz Wasilewski
* Tom Roberts
* Alex Gee
* Rob Yates
* Joe Watson
* Brandon Invergo
* Marco Galardini
* Owen Woods (09/07/2014)
* David Taylor (25/07/2014)
* Craig Richardson (25/07/2014)
* Kevin Rathbone
* Simon West
* Guillaume Tucker
* Zizwani Mhango
* Joe Gribbom
* Richard Armstrong
* Rachel Bow
* Will Hartley
* Donatien Garnier
* Graeham Douglas
* Stevan Wing
* John Sidiropoulos
* Emilio Monti
* Alba Diez
* Rob Shore
* Katy Marshall
* Daniel Farrant
* Jonathan Waite
* Giovanni Orlando
* John Clarke
* Ben Week
* Abhimanyu Singh
* Gustavo de Rojas Foschtinski
* Tariq Harris
* Joe Turner
* Clara Todd

'''Delayed training blacklist:'''

Now on the wall in Makespace, near the 3D printers.

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-5 members at a time in a 1 hr session.

3D Printing Induction syllabus:

how 3D printing works

safety
burn hazard
nozzle and platter
unit may move unexpectedly
avoid prolonged exposure to ABS fumes

damage to machine
kapton
is fragile - don't use scraper!
is expensive
needs to be clean
don't leave the machine unattended
heater could stick on if software crashes, for example

general
SD card eccentricities
keep lid on when printing
switch off when finished

PLA vs ABS
how to tell the difference
different temperature
biodegradable
need to change temperature profiles!

unload/load,
different axles for different spools
spool from under reel
beware of wrapping round axle!
colours (no need to run out all because test strip does that)
setting PLA/ABS
cut off lump

printing
preheating
if model stuck, wait to cool
keep an eye on it. can go strange half way!

levelling
not often needed
symptoms of unlevelness
first layer too thin or varying thickness
part not sticking
worst case: head touching bed
be careful not to damage kapton

software/workflow
(it is proposed that the course should not include detailed introduction to the
software, as this is mostly obvious, can freely be downloaded, and is well documented) - if there is high demand, consider running a software training course
scaffolding
setting colours

multicolour
can't do scaffolding and multicolour - maybe not true anymore?
issues with mixed materials

other stuff
strength characteristics - orientation is important
don't use fine
don't leave the room
paying

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make something?
* Should demonstrate import, setup, position and run
* possible examples (around 10m printing time)
** plain_game_tokes 1/2/5
** SpaceShuttle-small
** CookieCutter_apple_small

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to printing (watch carefully all steps)

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)