http://wiki.makespace.org/api.php?action=feedcontributions&feedformat=atom&user=Kitkatmarshall 2026-04-20T01:56:49Z User contributions MediaWiki 1.22.6 http://wiki.makespace.org/Equipment/3D_Printer/UM2Training 2018-04-24T16:10:29Z

<p>Kitkatmarshall: /* Trained Users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/3D Printer|UM2]] / Training<br /> <br /> = Ultimaker 2 3D Printer Training =<br /> <br /> This page documents the process for being trained on the Ultimaker 2 Printer, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~20min each)<br /> * Recommended project oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)<br /> <br /> A shorter conversion training session is available for members who were previously signed off to use the Makerbot 2X printer. These sessions last around 20 minutes and do not include individual sessions.<br /> <br /> == Booking ==<br /> <br /> For discussing and arranging slots, please use the mailing list. New training sessions will be announced on the Meetup group.<br /> <br /> Notes:<br /> * You can only be trained if you have RSVP'd to a Meetup session<br /> <br /> == Training Cheatsheet - Conversion Course ==<br /> <br /> Members already trained on and familiar with the Makerbot 2X can attend this short conversion course to be signed off to use the Ultimaker 2 3D printer. Up to 10 people can be accommodated on each course, which lasts 20 to 30 minutes.<br /> <br /> 1. Physical Differences from the 2X<br /> * Glass build plate, no kapton tape<br /> * Single extruder<br /> * Push feed<br /> <br /> 2. General<br /> * Use the correct filament (2.85mm, NOT 3mm or 1.75mm)<br /> * New filament storage system<br /> <br /> 3. Printing<br /> * Fence / Brim / Raft<br /> * OK to leave printer unattended after the first few layers<br /> * Camera available for remote monitoring<br /> * Use only plastic implements for part removal, take care not to melt them on the hot end<br /> <br /> 4. Cura Software<br /> * Import and place<br /> * Simple mode<br /> * Brief overview of advanced mode<br /> * Temperature set on printer not slicer<br /> * Exporting to SD card<br /> <br /> 5. Unload / Load filament<br /> * How to feed (slow first, then fast)<br /> * Select correct material in menu<br /> * Changing temperature and speed parameters from printer<br /> * Demonstrate the atomic method of cleaning the extruder to prevent feed jams<br /> <br /> 6. Filament pricing<br /> * 5p per gram for PLA and ABS, to be kept under review<br /> * Include wastage!<br /> <br /> == Training Cheatsheet - Full Course ==<br /> <br /> '''Group Session'''<br /> <br /> 1. Ask what each member hopes to get out of the 3D printer.<br /> <br /> 2. Explain how 3D printing works<br /> <br /> 3. Safety<br /> * Burn hazard – nozzle and build plate<br /> * Unit may move unexpectedly<br /> * Avoid prolonged exposure to ABS fumes<br /> <br /> 4. Damage to machine<br /> * Fragile build plate<br /> * Jammed filament<br /> <br /> 5. General<br /> * Use the correct filament (2.85mm)<br /> * Filament storage and feed system<br /> * Switch off when finished<br /> * Leave levelling to the owners but report any problems<br /> <br /> 6. PLA vs ABS<br /> * How to tell the difference<br /> * Different temperature<br /> * PLA Biodegradable<br /> * See the Wiki for tips on printing with ABS and cleaning after<br /> <br /> 7. Software / workflow<br /> * Importing<br /> * Positioning on bed<br /> * Supports<br /> * Setting quality / speed trade off<br /> * Advanced options<br /> * Exporting to SD card<br /> * Wiki for tips on Cura<br /> <br /> 8. Unload / load<br /> * Check filament for damadge, cut filament at an angle (see Wiki for problems when loading)<br /> * Attaching spool. Ensure correct direction and not tangled<br /> * Feeding (slow then fast)<br /> * Beware of wrapping round axle<br /> * Setting material in menu<br /> * Adjusting parameters, e.g. ABS plate temperature<br /> <br /> 9. Printing<br /> * Preheating<br /> * Fence printing<br /> * Keep an eye on progress, locally or with camera<br /> * If leaving unattended, put a post-it (or badger) with your contact details<br /> * Use only plastic implements for part removal<br /> <br /> 10. Other stuff<br /> * Demonstrate atomic method of cleaning the nozzle to prevent feed jams<br /> * Strength characteristics – orientation is important<br /> * '''Paying'''<br /> <br /> '''Individual Training Task'''<br /> <br /> Task<br /> * Should demonstrate import, setup, position and run<br /> * Choose a part that takes about 10 mins to print (preloaded on PC)<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to printing (watch carefully all steps)<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Highlight the wiki for more information and owners email address on poster<br /> * Add to the trained member list<br /> <br /> '''Project Oversight'''<br /> <br /> For next 2-3 projects, recommend member will find another more experienced trained user to support them (second pair of eyes)<br /> <br /> '''Record Training On Wiki'''<br /> <br /> <br /> == Please write your name clearly below ==<br /> <br /> * The trainer will add you to the Trained Users page on the Wiki but can't do that if they are unable to read your name.<br /> * Please remember to check the Wiki for tips and updates on using the Ultimaker.<br /> <br /> Date of training:<br /> <br /> == Trained Users ==<br /> <br /> The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):<br /> <br /> * Paul Osborn (Rob Voisey, 2015-07-30)<br /> * Julius Schmidt (Rob Voisey, 2015-07-30)<br /> * Peter Knight (Rob Voisey, 2015-07-30)<br /> * Adam Mulligan (Rob Voisey, 2015-07-30)<br /> * Charlotte Harvey (Rob Voisey, 2015-07-30)<br /> * Alex Gee (Rob Voisey, 2015-07-30)<br /> * Albert Santos (Rob Voisey, 2015-07-30)<br /> * Zizwani Mhango (Rob Voisey, 2015-07-30)<br /> * Christie Nel (Rob Voisey, 2015-07-30)<br /> * Robert Karpinski (Rob Voisey, 2015-07-30)<br /> * Alexis Mather (Stephen Harrison, 2015-08-03)<br /> * Ben Wheatley (Stephen Harrison, 2015-08-03)<br /> * Stevan Wing (Stephen Harrison, 2015-08-03)<br /> * Jae Tumer (Stephen Harrison, 2015-08-03)<br /> * Jennifer Herbert (Stephen Harrison, 2015-08-03)<br /> * Frodi Jones (Stephen Harrison, 2015-08-03)<br /> * Matt Wayland (Stephen Harrison, 2015-08-03)<br /> * Marco Aite (Stephen Harrison, 2015-08-03)<br /> * Graeham Douglas (Stephen Harrison, 2015-08-03)<br /> * Robin Sterling (Stephen Harrison, 2015-08-07)<br /> * Abhi Manyu (Stephen Harrison, 2015-08-07)<br /> * Ward Hills (Stephen Harrison, 2015-08-07)<br /> * Carols A. Lugo (Stephen Harrison, 2015-08-07)<br /> * Ben Alper (Stephen Harrison, 2015-08-07)<br /> * Jon Green (Stephen Harrison, 2015-08-07)<br /> * Marcin Izo (Stephen Harrison, 2015-08-07)<br /> * Steve Upton (Rob Voisey, 2015-08-11)<br /> * Frederic Sorgeloos (Rob Voisey, 2015-08-11)<br /> * Andrew Cooke (Rob Voisey, 2015-08-11)<br /> * Ned Booker (Rob Voisey, 2015-08-11)<br /> * Daryl Stewart (Paul Edgington, 2015-08-24)<br /> * Nacho Lopez (Paul Edgington, 2015-08-24)<br /> * Ed Robertson (Paul Edgington, 2015-08-24)<br /> * Clive Beale (Paul Edgington, 2015-08-24)<br /> * Oliver Fleck (Paul Edgington, 2015-08-24)<br /> * Mark Cheverton (Rob Voisey, 2015-09-08)<br /> * Nik (Rob Voisey, 2015-09-08)<br /> * Dan Tidhar (Rob Voisey, 2015-09-08)<br /> * Tobias Wenzel (Rob Voisey, 2015-09-08)<br /> * Brian Starkey (Rob Voisey, 2015-09-08)<br /> * Jonathan Waite (Rob Voisey, 2015-09-08)<br /> * Emyr James (Rob Voisey, 2015-09-08)<br /> * Richard Hall (Rob Voisey, 2015-09-08)<br /> * Andrew Dunn (Rob Voisey, 2015-09-08)<br /> * Andrea Cipri (Paul Edgington, 2015-09-30)<br /> * John Sidinopoulos (Paul Edgington, 2015-09-30)<br /> * Stuart Barton (Paul Edgington, 2015-09-30)<br /> * Mark Calleta (Paul Edgington, 2015-09-30)<br /> * Martin Lenz (Paul Edgington, 2015-09-30)<br /> * Phill Banks (Paul Edgington, 2015-10-21)<br /> * Felix Morley (Paul Edgington, 2015-10-21)<br /> * David Jordan (Paul Edgington, 2015-10-21)<br /> * Mark Roberts (Stephen Harrison, 2015-10-23)<br /> * Jenny Molloy (Stephen Harrison, 2015-10-23)<br /> * Henry Cawley (Rob Voisey, 2015-11-18)<br /> * Bogdan Spiridom (Rob Voisey, 2015-11-18)<br /> * Jakub Sanak (Rob Voisey, 2015-11-18)<br /> * Jack Brewster (Rob Voisey, 2015-11-18)<br /> * Mayke Santos (Rob Voisey, 2015-11-18)<br /> * Luis Veiga Pumar (Stephen Harrison, 2015-11-24)<br /> * Greg Matthews (Stephen Harrison, 2015-11-24)<br /> * Brian Corteil (Stephen Harrison, 2015-11-24)<br /> * Rob Rescorla (Stephen Harrison, 2015-11-24)<br /> * Leo Rones (Stephen Harrison, 2015-11-24)<br /> * Diana Probst (Stephen Harrison, 2015-11-25)<br /> * Adrian van den Heever (Stephen Harrison, 2015-11-25)<br /> * Al Napp (Stephen Harrison, 2015-11-25)<br /> * Katy Marshall (Stephen Harrison, 2015-12-01)<br /> * Peter Mottram (Stephen Harrison, 2015-12-01)<br /> * David Barham (Stephen Harrison, 2015-12-01)<br /> * Johan Henriksson­ (Stephen Harrison, 2015-12-01)<br /> * Fotis Fotiadis (Stephen Harrison, 2015-12-01)<br /> * Oliver Martin (Stephen Harrison, 2015-12-01)<br /> * Andrew Drummond (Stephen Harrison, 2015-12-01)<br /> * Spencer Dixon (Stephen Harrison, 2015-12-01)<br /> * Jonathan Woolf (Rob Voisey, 2016-01-07)<br /> * Daniel Bailey (Rob Voisey, 2016-01-07)<br /> * David Haines (Rob Voisey, 2016-01-07)<br /> * Giovanni Bisutii (Rob Voisey, 2016-01-07)<br /> * Simon Hartley (Daniel Bailey, 2016-02-11)<br /> * Francois Eve (Daniel Bailey, 2016-02-11)<br /> * Giovanni Orlando (Daniel Bailey, 2016-02-11)<br /> * Dan Tidhar (Daniel Bailey, 2016-02-11)<br /> * Shunsuke Fujibayash­i (Daniel Bailey, 2016-03-04)<br /> * Ronny Schlutter (Daniel Bailey, 2016-03-04)<br /> * Jamie Powell (Daniel Bailey, 2016-03-04)<br /> * Mark Wainwright (Daniel Bailey, 2016-03-04)<br /> * Charna Hume (Daniel Bailey, 2016-03-04)<br /> * Charlotte Godley (Daniel Bailey, 2016-03-04)<br /> * Jose Chitty (Stephen Harrison, 2016-03-22)<br /> * Mat Greenwood (Stephen Harrison, 2016-03-22)<br /> * David Fisher (Stephen Harrison, 2016-03-22)<br /> * Tom Kelly (Stephen Harrison, 2016-03-22)<br /> * David Bebb (Stephen Harrison, 2016-04-12)<br /> * David Taylor (Stephen Harrison, 2016-04-12)<br /> * Jo Brook (Stephen Harrison, 2016-04-12)<br /> * Craig Easton (Daniel Bailey, 2016-04-20)<br /> * James Griffiths (Daniel Bailey, 2016-04-20)<br /> * Paul Routley (Daniel Bailey, 2016-04-20)<br /> * Steve Murphy (Daniel Bailey, 2016-04-20)<br /> * Cong Cong Bo (Daniel Bailey, 2016-06-24)<br /> * Adrien Leger (Daniel Bailey, 2016-06-24)<br /> * David Marcus (Daniel Bailey, 2016-06-24)<br /> * Mik Lamming (Stephen Harrison, 2016-07-06)<br /> * Rob MacAulay (Stephen Harrison, 2016-07-06)<br /> * Daniel Farrant (Stephen Harrison, 2016-07-06)<br /> * Steve Carey (Stephen Harrison, 2016-07-06)<br /> * Debora Rodriguez (Daniel Bailey, 2016-07-30)<br /> * David Horsnell (Daniel Bailey, 2016-07-30)<br /> * Cat Fitzpatrick (Daniel Bailey, 2016-08-12)<br /> * Hsingling Lian (Daniel Bailey, 2016-08-12)<br /> * Jeremy Bentham (Daniel Bailey, 2016-08-12)<br /> * Nadia Bassiri (Daniel Bailey, 2016-08-12)<br /> * Thomas Wanger (Daniel Bailey, 2016-08-12)<br /> * Migual Morin (Stephen Harrison, 2016-09-23)<br /> * Eric Jones (Stephen Harrison, 2016-09-23)<br /> * Will Nock (Stephen Harrison, 2016-09-23)<br /> * Mihai Truta (Stephen Harrison, 2016-09-23)<br /> * Grawham Douglas (Stephen Harrison, 2016-09-23)<br /> * Hedley Simons (Stephen Harrison, 2016-10-20)<br /> * Ravan Keerthi (Stephen Harrison, 2016-10-20)<br /> * Richard Hosking (Stephen Harrison, 2016-11-14)<br /> * Zuke Heavens (Stephen Harrison, 2016-11-14)<br /> * Volker Eckert (Stephen Harrison, 2016-11-14)<br /> * Tian Huang (Stephen Harrison, 2016-11-14)<br /> * Craig Richardson (Stephen Harrison, 2016-11-14)<br /> * Charlie Stokes (Stephen Harrison, 2016-11-23)<br /> * Ben Brebner (Stephen Harrison, 2016-11-23)<br /> * Thomas Kopsch (Stephen Harrison, 2016-11-23)<br /> * Mateusz Kosturek (Stephen Harrison, 2016-11-23)<br /> * Alex Bate (Stephen Harrison, 2016-11-30)<br /> * Martha Levine (Stephen Harrison, 2016-11-30)<br /> * John Perdue (Stephen Harrison, 2016-11-30)<br /> * Carlos Pereira Atencio (Stephen Harrison, 2016-11-30)<br /> * Francisco Pelligar (Stephen Harrison, 2016-12-05)<br /> * Rick Smith (Stephen Harrison, 2016-12-05)<br /> * Mark Chapman (Stephen Harrison, 2016-12-05)<br /> * Peter Spencer (Stephen Harrison, 2016-12-05)<br /> * Josh Kaggie (Stephen Harrison, 2016-12-11)<br /> * Ian Spolton (Stephen Harrison, 2016-12-11)<br /> * Angela Birlea (Stephen Harrison, 2017-02-09)<br /> * Scott Cunliffe (Stephen Harrison, 2017-02-09)<br /> * Boyuan Xiao (Stephen Harrison, 2017-02-09)<br /> * Peter Molnar (Stephen Harrison, 2017-02-20)<br /> * Andy Clark (Stephen Harrison, 2017-02-09)<br /> * Nikolay Pchelintsev (Stephen Harrison, 2017-02-09)<br /> * Tim Rowsful (Stephen Harrison, 2017-03-02)<br /> * Joe Escott (Stephen Harrison, 2017-03-02)<br /> * Dean Kos (Stephen Harrison, 2017-03-02)<br /> * Despina Devoudani (Stephen Harrison, 2017-03-21)<br /> * John Doherty (Stephen Harrison, 2017-03-21)<br /> * Peter Murray-Rust (Stephen Harrison, 2017-03-21)<br /> * Tom Oinn (Stephen Harrison, 2017-03-21)<br /> * Rob Sandford (Will Nock, 2017-03-27)<br /> * Gemma Goodfellow (Will Nock, 2017-03-27)<br /> * Tommaso Leonardi (Will Nock, 2017-03-27)<br /> * Carlos Araque (Will Nock, 2017-03-27)<br /> * James Potter (Stephen Harrison, 2017-05-10)<br /> * Ian Guebert (Stephen Harrison, 2017-05-10)<br /> * Xorge Castro (Stephen Harrison, 2017-05-10)<br /> * George Agnew (Stephen Harrison, 2017-05-10)<br /> * Tom Feather (Stephen Harrison, 2017-05-10)<br /> * Simon Marache-Francisco (Will Nock, 2017-05-17)<br /> * Hardie Pienaar (Will Nock, 2017-05-17)<br /> * Moti Tabulo (Will Nock, 2017-05-17)<br /> * Andy Fisher (Will Nock, 2017-05-17)<br /> * Marie Besnier (Katy Marshall,2017-06-06)<br /> * Graskc Van Leeuwei (Katy Marshall,2017-06-06)<br /> * Lin Zheng (Katy Marshall,2017-06-06)<br /> * Jose Diez (Stephen Harrison, 2017-07-14)<br /> * Richard Green (Stephen Harrison, 2017-07-14)<br /> * Doroteja Maklin (Stephen Harrison, 2017-07-14)<br /> * Daniel Tovisi (Stephen Harrison, 2017-07-14)<br /> * Andrzej Kaczorowski (Stephen Harrison, 2017-07-14)<br /> * Laura James (Katy Marshall, 2017-07-20)<br /> * Michael Dales (Katy Marshall, 2017-07-20)<br /> * Sammy Mahdi (Katy Marshall, 2017-07-20)<br /> * Angus Main (Katy Marshall, 2017-07-20)<br /> * Jenni Main (Katy Marshall, 2017-07-24)<br /> * Sean Sleator (Katy Marshall, 2017-07-24)<br /> * Chammi Udalamatta (Katy Marshall, 2017-07-24)<br /> * Robert Lamont (Boyuan Xiao, 2017-07-26)<br /> * Alan Scott (Boyuan Xiao, 2017-07-26)<br /> * Juan Reyero (Boyuan Xiao, 2017-07-26)<br /> * Ross Henry (Boyuan Xiao, 2017-08-17)<br /> * Tom De C (Katy Marshall, 2017-09-25)<br /> * Joe Studwell (Katy Marshall, 2017-09-25)<br /> * Melanie T (Katy Marshall, 2017-09-25)<br /> * E.R. Canales-Canales (Katy Marshall, 2017-09-25)<br /> * Hideaki Page (Boyuan Xiao, 2017-10-11)<br /> * Matthew Timmons-Br­own (Boyuan Xiao, 2017-10-11)<br /> * Jana Grajciarova (Boyuan Xiao, 2017-10-11)<br /> * David Rodriguez (Boyuan Xiao, 2017-11-20)<br /> * Leonie Gärtner (Boyuan Xiao, 2017-11-20)<br /> * Richard Blakesley (Boyuan Xiao, 2017-11-20)<br /> * Israel Garcia (Boyuan Xiao, 2017-11-20)<br /> * Bryan Carroll (Stephen Harrison, 2018-02-12)<br /> * Edward Taylor (Stephen Harrison, 2018-02-12)<br /> * Hugh Steward (Stephen Harrison, 2018-02-12)<br /> * Julia Citron (Stephen Harrison, 2018-02-12)<br /> * Fai Poon (Stephen Harrison, 2018-02-12)<br /> * Erdem Kaya (Stephen Harrison, 2018-03-06)<br /> * Graeme Durant (Stephen Harrison, 2018-03-06)<br /> * Andrew Kadis (Stephen Harrison, 2018-03-06)<br /> * Adam St Ledger-honeybone (Stephen Harrison, 2018-03-07)<br /> * Phil McArthur (Stephen Harrison, 2018-03-07)<br /> * Ali Shirpour (Katy Marshall, 2018-03-08)<br /> * Mark Palmer (Katy Marshall, 2018-03-08)<br /> * Ashkan Ahmadi (Katy Marshall, 2018-03-08)<br /> * Robert Copcutt (Katy Marshall, 2018-03-08)<br /> * Adam Root (Katy Marshall, 2018-04-18)<br /> * Paul Elias (Katy Marshall, 2018-04-18)<br /> * David Hay (Katy Marshall, 2018-04-19)<br /> * Abi Wills (Katy Marshall, 2018-04-19)<br /> * Adeu Szeuczk (Katy Marshall, 2018-04-19)<br /> * James Stewart (Katy Marshall, 2018-04-19)<br /> * Mark Hutchings (Katy Marshall, 2018-04-19)<br /> * Helen Oliver (Katy Marshall, 2018-04-23)<br /> * Simon White (Katy Marshall, 2018-04-23)<br /> * Andrew Burrows (Katy Marshall, 2018-04-23)<br /> * Aaron Eveleigh (Katy Marshall, 2018-04-23)<br /> * Jason McLeod (Katy Marshall, 2018-04-23)<br /> * Andy Gale (Katy Marshall, 2018-04-23)<br /> * James Bunnett (Katy Marshall, 2018-04-23)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/3D_Printer/UM2Training 2018-04-19T21:34:09Z

<p>Kitkatmarshall: /* Trained Users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/3D Printer|UM2]] / Training<br /> <br /> = Ultimaker 2 3D Printer Training =<br /> <br /> This page documents the process for being trained on the Ultimaker 2 Printer, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~20min each)<br /> * Recommended project oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)<br /> <br /> A shorter conversion training session is available for members who were previously signed off to use the Makerbot 2X printer. These sessions last around 20 minutes and do not include individual sessions.<br /> <br /> == Booking ==<br /> <br /> For discussing and arranging slots, please use the mailing list. New training sessions will be announced on the Meetup group.<br /> <br /> Notes:<br /> * You can only be trained if you have RSVP'd to a Meetup session<br /> <br /> == Training Cheatsheet - Conversion Course ==<br /> <br /> Members already trained on and familiar with the Makerbot 2X can attend this short conversion course to be signed off to use the Ultimaker 2 3D printer. Up to 10 people can be accommodated on each course, which lasts 20 to 30 minutes.<br /> <br /> 1. Physical Differences from the 2X<br /> * Glass build plate, no kapton tape<br /> * Single extruder<br /> * Push feed<br /> <br /> 2. General<br /> * Use the correct filament (2.85mm, NOT 3mm or 1.75mm)<br /> * New filament storage system<br /> <br /> 3. Printing<br /> * Fence / Brim / Raft<br /> * OK to leave printer unattended after the first few layers<br /> * Camera available for remote monitoring<br /> * Use only plastic implements for part removal, take care not to melt them on the hot end<br /> <br /> 4. Cura Software<br /> * Import and place<br /> * Simple mode<br /> * Brief overview of advanced mode<br /> * Temperature set on printer not slicer<br /> * Exporting to SD card<br /> <br /> 5. Unload / Load filament<br /> * How to feed (slow first, then fast)<br /> * Select correct material in menu<br /> * Changing temperature and speed parameters from printer<br /> * Demonstrate the atomic method of cleaning the extruder to prevent feed jams<br /> <br /> 6. Filament pricing<br /> * 5p per gram for PLA and ABS, to be kept under review<br /> * Include wastage!<br /> <br /> == Training Cheatsheet - Full Course ==<br /> <br /> '''Group Session'''<br /> <br /> 1. Ask what each member hopes to get out of the 3D printer.<br /> <br /> 2. Explain how 3D printing works<br /> <br /> 3. Safety<br /> * Burn hazard – nozzle and build plate<br /> * Unit may move unexpectedly<br /> * Avoid prolonged exposure to ABS fumes<br /> <br /> 4. Damage to machine<br /> * Fragile build plate<br /> * Jammed filament<br /> <br /> 5. General<br /> * Use the correct filament (2.85mm)<br /> * Filament storage and feed system<br /> * Switch off when finished<br /> * Leave levelling to the owners but report any problems<br /> <br /> 6. PLA vs ABS<br /> * How to tell the difference<br /> * Different temperature<br /> * PLA Biodegradable<br /> * See the Wiki for tips on printing with ABS and cleaning after<br /> <br /> 7. Software / workflow<br /> * Importing<br /> * Positioning on bed<br /> * Supports<br /> * Setting quality / speed trade off<br /> * Advanced options<br /> * Exporting to SD card<br /> * Wiki for tips on Cura<br /> <br /> 8. Unload / load<br /> * Check filament for damadge, cut filament at an angle (see Wiki for problems when loading)<br /> * Attaching spool. Ensure correct direction and not tangled<br /> * Feeding (slow then fast)<br /> * Beware of wrapping round axle<br /> * Setting material in menu<br /> * Adjusting parameters, e.g. ABS plate temperature<br /> <br /> 9. Printing<br /> * Preheating<br /> * Fence printing<br /> * Keep an eye on progress, locally or with camera<br /> * If leaving unattended, put a post-it (or badger) with your contact details<br /> * Use only plastic implements for part removal<br /> <br /> 10. Other stuff<br /> * Demonstrate atomic method of cleaning the nozzle to prevent feed jams<br /> * Strength characteristics – orientation is important<br /> * '''Paying'''<br /> <br /> '''Individual Training Task'''<br /> <br /> Task<br /> * Should demonstrate import, setup, position and run<br /> * Choose a part that takes about 10 mins to print (preloaded on PC)<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to printing (watch carefully all steps)<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Highlight the wiki for more information and owners email address on poster<br /> * Add to the trained member list<br /> <br /> '''Project Oversight'''<br /> <br /> For next 2-3 projects, recommend member will find another more experienced trained user to support them (second pair of eyes)<br /> <br /> '''Record Training On Wiki'''<br /> <br /> <br /> == Please write your name clearly below ==<br /> <br /> * The trainer will add you to the Trained Users page on the Wiki but can't do that if they are unable to read your name.<br /> * Please remember to check the Wiki for tips and updates on using the Ultimaker.<br /> <br /> Date of training:<br /> <br /> == Trained Users ==<br /> <br /> The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):<br /> <br /> * Paul Osborn (Rob Voisey, 2015-07-30)<br /> * Julius Schmidt (Rob Voisey, 2015-07-30)<br /> * Peter Knight (Rob Voisey, 2015-07-30)<br /> * Adam Mulligan (Rob Voisey, 2015-07-30)<br /> * Charlotte Harvey (Rob Voisey, 2015-07-30)<br /> * Alex Gee (Rob Voisey, 2015-07-30)<br /> * Albert Santos (Rob Voisey, 2015-07-30)<br /> * Zizwani Mhango (Rob Voisey, 2015-07-30)<br /> * Christie Nel (Rob Voisey, 2015-07-30)<br /> * Robert Karpinski (Rob Voisey, 2015-07-30)<br /> * Alexis Mather (Stephen Harrison, 2015-08-03)<br /> * Ben Wheatley (Stephen Harrison, 2015-08-03)<br /> * Stevan Wing (Stephen Harrison, 2015-08-03)<br /> * Jae Tumer (Stephen Harrison, 2015-08-03)<br /> * Jennifer Herbert (Stephen Harrison, 2015-08-03)<br /> * Frodi Jones (Stephen Harrison, 2015-08-03)<br /> * Matt Wayland (Stephen Harrison, 2015-08-03)<br /> * Marco Aite (Stephen Harrison, 2015-08-03)<br /> * Graeham Douglas (Stephen Harrison, 2015-08-03)<br /> * Robin Sterling (Stephen Harrison, 2015-08-07)<br /> * Abhi Manyu (Stephen Harrison, 2015-08-07)<br /> * Ward Hills (Stephen Harrison, 2015-08-07)<br /> * Carols A. Lugo (Stephen Harrison, 2015-08-07)<br /> * Ben Alper (Stephen Harrison, 2015-08-07)<br /> * Jon Green (Stephen Harrison, 2015-08-07)<br /> * Marcin Izo (Stephen Harrison, 2015-08-07)<br /> * Steve Upton (Rob Voisey, 2015-08-11)<br /> * Frederic Sorgeloos (Rob Voisey, 2015-08-11)<br /> * Andrew Cooke (Rob Voisey, 2015-08-11)<br /> * Ned Booker (Rob Voisey, 2015-08-11)<br /> * Daryl Stewart (Paul Edgington, 2015-08-24)<br /> * Nacho Lopez (Paul Edgington, 2015-08-24)<br /> * Ed Robertson (Paul Edgington, 2015-08-24)<br /> * Clive Beale (Paul Edgington, 2015-08-24)<br /> * Oliver Fleck (Paul Edgington, 2015-08-24)<br /> * Mark Cheverton (Rob Voisey, 2015-09-08)<br /> * Nik (Rob Voisey, 2015-09-08)<br /> * Dan Tidhar (Rob Voisey, 2015-09-08)<br /> * Tobias Wenzel (Rob Voisey, 2015-09-08)<br /> * Brian Starkey (Rob Voisey, 2015-09-08)<br /> * Jonathan Waite (Rob Voisey, 2015-09-08)<br /> * Emyr James (Rob Voisey, 2015-09-08)<br /> * Richard Hall (Rob Voisey, 2015-09-08)<br /> * Andrew Dunn (Rob Voisey, 2015-09-08)<br /> * Andrea Cipri (Paul Edgington, 2015-09-30)<br /> * John Sidinopoulos (Paul Edgington, 2015-09-30)<br /> * Stuart Barton (Paul Edgington, 2015-09-30)<br /> * Mark Calleta (Paul Edgington, 2015-09-30)<br /> * Martin Lenz (Paul Edgington, 2015-09-30)<br /> * Phill Banks (Paul Edgington, 2015-10-21)<br /> * Felix Morley (Paul Edgington, 2015-10-21)<br /> * David Jordan (Paul Edgington, 2015-10-21)<br /> * Mark Roberts (Stephen Harrison, 2015-10-23)<br /> * Jenny Molloy (Stephen Harrison, 2015-10-23)<br /> * Henry Cawley (Rob Voisey, 2015-11-18)<br /> * Bogdan Spiridom (Rob Voisey, 2015-11-18)<br /> * Jakub Sanak (Rob Voisey, 2015-11-18)<br /> * Jack Brewster (Rob Voisey, 2015-11-18)<br /> * Mayke Santos (Rob Voisey, 2015-11-18)<br /> * Luis Veiga Pumar (Stephen Harrison, 2015-11-24)<br /> * Greg Matthews (Stephen Harrison, 2015-11-24)<br /> * Brian Corteil (Stephen Harrison, 2015-11-24)<br /> * Rob Rescorla (Stephen Harrison, 2015-11-24)<br /> * Leo Rones (Stephen Harrison, 2015-11-24)<br /> * Diana Probst (Stephen Harrison, 2015-11-25)<br /> * Adrian van den Heever (Stephen Harrison, 2015-11-25)<br /> * Al Napp (Stephen Harrison, 2015-11-25)<br /> * Katy Marshall (Stephen Harrison, 2015-12-01)<br /> * Peter Mottram (Stephen Harrison, 2015-12-01)<br /> * David Barham (Stephen Harrison, 2015-12-01)<br /> * Johan Henriksson­ (Stephen Harrison, 2015-12-01)<br /> * Fotis Fotiadis (Stephen Harrison, 2015-12-01)<br /> * Oliver Martin (Stephen Harrison, 2015-12-01)<br /> * Andrew Drummond (Stephen Harrison, 2015-12-01)<br /> * Spencer Dixon (Stephen Harrison, 2015-12-01)<br /> * Jonathan Woolf (Rob Voisey, 2016-01-07)<br /> * Daniel Bailey (Rob Voisey, 2016-01-07)<br /> * David Haines (Rob Voisey, 2016-01-07)<br /> * Giovanni Bisutii (Rob Voisey, 2016-01-07)<br /> * Simon Hartley (Daniel Bailey, 2016-02-11)<br /> * Francois Eve (Daniel Bailey, 2016-02-11)<br /> * Giovanni Orlando (Daniel Bailey, 2016-02-11)<br /> * Dan Tidhar (Daniel Bailey, 2016-02-11)<br /> * Shunsuke Fujibayash­i (Daniel Bailey, 2016-03-04)<br /> * Ronny Schlutter (Daniel Bailey, 2016-03-04)<br /> * Jamie Powell (Daniel Bailey, 2016-03-04)<br /> * Mark Wainwright (Daniel Bailey, 2016-03-04)<br /> * Charna Hume (Daniel Bailey, 2016-03-04)<br /> * Charlotte Godley (Daniel Bailey, 2016-03-04)<br /> * Jose Chitty (Stephen Harrison, 2016-03-22)<br /> * Mat Greenwood (Stephen Harrison, 2016-03-22)<br /> * David Fisher (Stephen Harrison, 2016-03-22)<br /> * Tom Kelly (Stephen Harrison, 2016-03-22)<br /> * David Bebb (Stephen Harrison, 2016-04-12)<br /> * David Taylor (Stephen Harrison, 2016-04-12)<br /> * Jo Brook (Stephen Harrison, 2016-04-12)<br /> * Craig Easton (Daniel Bailey, 2016-04-20)<br /> * James Griffiths (Daniel Bailey, 2016-04-20)<br /> * Paul Routley (Daniel Bailey, 2016-04-20)<br /> * Steve Murphy (Daniel Bailey, 2016-04-20)<br /> * Cong Cong Bo (Daniel Bailey, 2016-06-24)<br /> * Adrien Leger (Daniel Bailey, 2016-06-24)<br /> * David Marcus (Daniel Bailey, 2016-06-24)<br /> * Mik Lamming (Stephen Harrison, 2016-07-06)<br /> * Rob MacAulay (Stephen Harrison, 2016-07-06)<br /> * Daniel Farrant (Stephen Harrison, 2016-07-06)<br /> * Steve Carey (Stephen Harrison, 2016-07-06)<br /> * Debora Rodriguez (Daniel Bailey, 2016-07-30)<br /> * David Horsnell (Daniel Bailey, 2016-07-30)<br /> * Cat Fitzpatrick (Daniel Bailey, 2016-08-12)<br /> * Hsingling Lian (Daniel Bailey, 2016-08-12)<br /> * Jeremy Bentham (Daniel Bailey, 2016-08-12)<br /> * Nadia Bassiri (Daniel Bailey, 2016-08-12)<br /> * Thomas Wanger (Daniel Bailey, 2016-08-12)<br /> * Migual Morin (Stephen Harrison, 2016-09-23)<br /> * Eric Jones (Stephen Harrison, 2016-09-23)<br /> * Will Nock (Stephen Harrison, 2016-09-23)<br /> * Mihai Truta (Stephen Harrison, 2016-09-23)<br /> * Grawham Douglas (Stephen Harrison, 2016-09-23)<br /> * Hedley Simons (Stephen Harrison, 2016-10-20)<br /> * Ravan Keerthi (Stephen Harrison, 2016-10-20)<br /> * Richard Hosking (Stephen Harrison, 2016-11-14)<br /> * Zuke Heavens (Stephen Harrison, 2016-11-14)<br /> * Volker Eckert (Stephen Harrison, 2016-11-14)<br /> * Tian Huang (Stephen Harrison, 2016-11-14)<br /> * Craig Richardson (Stephen Harrison, 2016-11-14)<br /> * Charlie Stokes (Stephen Harrison, 2016-11-23)<br /> * Ben Brebner (Stephen Harrison, 2016-11-23)<br /> * Thomas Kopsch (Stephen Harrison, 2016-11-23)<br /> * Mateusz Kosturek (Stephen Harrison, 2016-11-23)<br /> * Alex Bate (Stephen Harrison, 2016-11-30)<br /> * Martha Levine (Stephen Harrison, 2016-11-30)<br /> * John Perdue (Stephen Harrison, 2016-11-30)<br /> * Carlos Pereira Atencio (Stephen Harrison, 2016-11-30)<br /> * Francisco Pelligar (Stephen Harrison, 2016-12-05)<br /> * Rick Smith (Stephen Harrison, 2016-12-05)<br /> * Mark Chapman (Stephen Harrison, 2016-12-05)<br /> * Peter Spencer (Stephen Harrison, 2016-12-05)<br /> * Josh Kaggie (Stephen Harrison, 2016-12-11)<br /> * Ian Spolton (Stephen Harrison, 2016-12-11)<br /> * Angela Birlea (Stephen Harrison, 2017-02-09)<br /> * Scott Cunliffe (Stephen Harrison, 2017-02-09)<br /> * Boyuan Xiao (Stephen Harrison, 2017-02-09)<br /> * Peter Molnar (Stephen Harrison, 2017-02-20)<br /> * Andy Clark (Stephen Harrison, 2017-02-09)<br /> * Nikolay Pchelintsev (Stephen Harrison, 2017-02-09)<br /> * Tim Rowsful (Stephen Harrison, 2017-03-02)<br /> * Joe Escott (Stephen Harrison, 2017-03-02)<br /> * Dean Kos (Stephen Harrison, 2017-03-02)<br /> * Despina Devoudani (Stephen Harrison, 2017-03-21)<br /> * John Doherty (Stephen Harrison, 2017-03-21)<br /> * Peter Murray-Rust (Stephen Harrison, 2017-03-21)<br /> * Tom Oinn (Stephen Harrison, 2017-03-21)<br /> * Rob Sandford (Will Nock, 2017-03-27)<br /> * Gemma Goodfellow (Will Nock, 2017-03-27)<br /> * Tommaso Leonardi (Will Nock, 2017-03-27)<br /> * Carlos Araque (Will Nock, 2017-03-27)<br /> * James Potter (Stephen Harrison, 2017-05-10)<br /> * Ian Guebert (Stephen Harrison, 2017-05-10)<br /> * Xorge Castro (Stephen Harrison, 2017-05-10)<br /> * George Agnew (Stephen Harrison, 2017-05-10)<br /> * Tom Feather (Stephen Harrison, 2017-05-10)<br /> * Simon Marache-Francisco (Will Nock, 2017-05-17)<br /> * Hardie Pienaar (Will Nock, 2017-05-17)<br /> * Moti Tabulo (Will Nock, 2017-05-17)<br /> * Andy Fisher (Will Nock, 2017-05-17)<br /> * Marie Besnier (Katy Marshall,2017-06-06)<br /> * Graskc Van Leeuwei (Katy Marshall,2017-06-06)<br /> * Lin Zheng (Katy Marshall,2017-06-06)<br /> * Jose Diez (Stephen Harrison, 2017-07-14)<br /> * Richard Green (Stephen Harrison, 2017-07-14)<br /> * Doroteja Maklin (Stephen Harrison, 2017-07-14)<br /> * Daniel Tovisi (Stephen Harrison, 2017-07-14)<br /> * Andrzej Kaczorowski (Stephen Harrison, 2017-07-14)<br /> * Laura James (Katy Marshall, 2017-07-20)<br /> * Michael Dales (Katy Marshall, 2017-07-20)<br /> * Sammy Mahdi (Katy Marshall, 2017-07-20)<br /> * Angus Main (Katy Marshall, 2017-07-20)<br /> * Jenni Main (Katy Marshall, 2017-07-24)<br /> * Sean Sleator (Katy Marshall, 2017-07-24)<br /> * Chammi Udalamatta (Katy Marshall, 2017-07-24)<br /> * Robert Lamont (Boyuan Xiao, 2017-07-26)<br /> * Alan Scott (Boyuan Xiao, 2017-07-26)<br /> * Juan Reyero (Boyuan Xiao, 2017-07-26)<br /> * Ross Henry (Boyuan Xiao, 2017-08-17)<br /> * Tom De C (Katy Marshall, 2017-09-25)<br /> * Joe Studwell (Katy Marshall, 2017-09-25)<br /> * Melanie T (Katy Marshall, 2017-09-25)<br /> * E.R. Canales-Canales (Katy Marshall, 2017-09-25)<br /> * Hideaki Page (Boyuan Xiao, 2017-10-11)<br /> * Matthew Timmons-Br­own (Boyuan Xiao, 2017-10-11)<br /> * Jana Grajciarova (Boyuan Xiao, 2017-10-11)<br /> * David Rodriguez (Boyuan Xiao, 2017-11-20)<br /> * Leonie Gärtner (Boyuan Xiao, 2017-11-20)<br /> * Richard Blakesley (Boyuan Xiao, 2017-11-20)<br /> * Israel Garcia (Boyuan Xiao, 2017-11-20)<br /> * Bryan Carroll (Stephen Harrison, 2018-02-12)<br /> * Edward Taylor (Stephen Harrison, 2018-02-12)<br /> * Hugh Steward (Stephen Harrison, 2018-02-12)<br /> * Julia Citron (Stephen Harrison, 2018-02-12)<br /> * Fai Poon (Stephen Harrison, 2018-02-12)<br /> * Erdem Kaya (Stephen Harrison, 2018-03-06)<br /> * Graeme Durant (Stephen Harrison, 2018-03-06)<br /> * Andrew Kadis (Stephen Harrison, 2018-03-06)<br /> * Adam St Ledger-honeybone (Stephen Harrison, 2018-03-07)<br /> * Phil McArthur (Stephen Harrison, 2018-03-07)<br /> * Ali Shirpour (Katy Marshall, 2018-03-08)<br /> * Mark Palmer (Katy Marshall, 2018-03-08)<br /> * Ashkan Ahmadi (Katy Marshall, 2018-03-08)<br /> * Robert Copcutt (Katy Marshall, 2018-03-08)<br /> * Adam Root (Katy Marshall, 2018-04-18)<br /> * Paul Elias (Katy Marshall, 2018-04-18)<br /> * David Hay (Katy Marshall, 2018-04-19)<br /> * Abi Wills (Katy Marshall, 2018-04-19)<br /> * Adeu Szeuczk (Katy Marshall, 2018-04-19)<br /> * James Stewart (Katy Marshall, 2018-04-19)<br /> * Mark Hutchings (Katy Marshall, 2018-04-19)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/3D_Printer/UM2Training 2018-04-18T12:50:13Z

<p>Kitkatmarshall: /* Trained Users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/3D Printer|UM2]] / Training<br /> <br /> = Ultimaker 2 3D Printer Training =<br /> <br /> This page documents the process for being trained on the Ultimaker 2 Printer, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~20min each)<br /> * Recommended project oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)<br /> <br /> A shorter conversion training session is available for members who were previously signed off to use the Makerbot 2X printer. These sessions last around 20 minutes and do not include individual sessions.<br /> <br /> == Booking ==<br /> <br /> For discussing and arranging slots, please use the mailing list. New training sessions will be announced on the Meetup group.<br /> <br /> Notes:<br /> * You can only be trained if you have RSVP'd to a Meetup session<br /> <br /> == Training Cheatsheet - Conversion Course ==<br /> <br /> Members already trained on and familiar with the Makerbot 2X can attend this short conversion course to be signed off to use the Ultimaker 2 3D printer. Up to 10 people can be accommodated on each course, which lasts 20 to 30 minutes.<br /> <br /> 1. Physical Differences from the 2X<br /> * Glass build plate, no kapton tape<br /> * Single extruder<br /> * Push feed<br /> <br /> 2. General<br /> * Use the correct filament (2.85mm, NOT 3mm or 1.75mm)<br /> * New filament storage system<br /> <br /> 3. Printing<br /> * Fence / Brim / Raft<br /> * OK to leave printer unattended after the first few layers<br /> * Camera available for remote monitoring<br /> * Use only plastic implements for part removal, take care not to melt them on the hot end<br /> <br /> 4. Cura Software<br /> * Import and place<br /> * Simple mode<br /> * Brief overview of advanced mode<br /> * Temperature set on printer not slicer<br /> * Exporting to SD card<br /> <br /> 5. Unload / Load filament<br /> * How to feed (slow first, then fast)<br /> * Select correct material in menu<br /> * Changing temperature and speed parameters from printer<br /> * Demonstrate the atomic method of cleaning the extruder to prevent feed jams<br /> <br /> 6. Filament pricing<br /> * 5p per gram for PLA and ABS, to be kept under review<br /> * Include wastage!<br /> <br /> == Training Cheatsheet - Full Course ==<br /> <br /> '''Group Session'''<br /> <br /> 1. Ask what each member hopes to get out of the 3D printer.<br /> <br /> 2. Explain how 3D printing works<br /> <br /> 3. Safety<br /> * Burn hazard – nozzle and build plate<br /> * Unit may move unexpectedly<br /> * Avoid prolonged exposure to ABS fumes<br /> <br /> 4. Damage to machine<br /> * Fragile build plate<br /> * Jammed filament<br /> <br /> 5. General<br /> * Use the correct filament (2.85mm)<br /> * Filament storage and feed system<br /> * Switch off when finished<br /> * Leave levelling to the owners but report any problems<br /> <br /> 6. PLA vs ABS<br /> * How to tell the difference<br /> * Different temperature<br /> * PLA Biodegradable<br /> * See the Wiki for tips on printing with ABS and cleaning after<br /> <br /> 7. Software / workflow<br /> * Importing<br /> * Positioning on bed<br /> * Supports<br /> * Setting quality / speed trade off<br /> * Advanced options<br /> * Exporting to SD card<br /> * Wiki for tips on Cura<br /> <br /> 8. Unload / load<br /> * Check filament for damadge, cut filament at an angle (see Wiki for problems when loading)<br /> * Attaching spool. Ensure correct direction and not tangled<br /> * Feeding (slow then fast)<br /> * Beware of wrapping round axle<br /> * Setting material in menu<br /> * Adjusting parameters, e.g. ABS plate temperature<br /> <br /> 9. Printing<br /> * Preheating<br /> * Fence printing<br /> * Keep an eye on progress, locally or with camera<br /> * If leaving unattended, put a post-it (or badger) with your contact details<br /> * Use only plastic implements for part removal<br /> <br /> 10. Other stuff<br /> * Demonstrate atomic method of cleaning the nozzle to prevent feed jams<br /> * Strength characteristics – orientation is important<br /> * '''Paying'''<br /> <br /> '''Individual Training Task'''<br /> <br /> Task<br /> * Should demonstrate import, setup, position and run<br /> * Choose a part that takes about 10 mins to print (preloaded on PC)<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to printing (watch carefully all steps)<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Highlight the wiki for more information and owners email address on poster<br /> * Add to the trained member list<br /> <br /> '''Project Oversight'''<br /> <br /> For next 2-3 projects, recommend member will find another more experienced trained user to support them (second pair of eyes)<br /> <br /> '''Record Training On Wiki'''<br /> <br /> <br /> == Please write your name clearly below ==<br /> <br /> * The trainer will add you to the Trained Users page on the Wiki but can't do that if they are unable to read your name.<br /> * Please remember to check the Wiki for tips and updates on using the Ultimaker.<br /> <br /> Date of training:<br /> <br /> == Trained Users ==<br /> <br /> The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):<br /> <br /> * Paul Osborn (Rob Voisey, 2015-07-30)<br /> * Julius Schmidt (Rob Voisey, 2015-07-30)<br /> * Peter Knight (Rob Voisey, 2015-07-30)<br /> * Adam Mulligan (Rob Voisey, 2015-07-30)<br /> * Charlotte Harvey (Rob Voisey, 2015-07-30)<br /> * Alex Gee (Rob Voisey, 2015-07-30)<br /> * Albert Santos (Rob Voisey, 2015-07-30)<br /> * Zizwani Mhango (Rob Voisey, 2015-07-30)<br /> * Christie Nel (Rob Voisey, 2015-07-30)<br /> * Robert Karpinski (Rob Voisey, 2015-07-30)<br /> * Alexis Mather (Stephen Harrison, 2015-08-03)<br /> * Ben Wheatley (Stephen Harrison, 2015-08-03)<br /> * Stevan Wing (Stephen Harrison, 2015-08-03)<br /> * Jae Tumer (Stephen Harrison, 2015-08-03)<br /> * Jennifer Herbert (Stephen Harrison, 2015-08-03)<br /> * Frodi Jones (Stephen Harrison, 2015-08-03)<br /> * Matt Wayland (Stephen Harrison, 2015-08-03)<br /> * Marco Aite (Stephen Harrison, 2015-08-03)<br /> * Graeham Douglas (Stephen Harrison, 2015-08-03)<br /> * Robin Sterling (Stephen Harrison, 2015-08-07)<br /> * Abhi Manyu (Stephen Harrison, 2015-08-07)<br /> * Ward Hills (Stephen Harrison, 2015-08-07)<br /> * Carols A. Lugo (Stephen Harrison, 2015-08-07)<br /> * Ben Alper (Stephen Harrison, 2015-08-07)<br /> * Jon Green (Stephen Harrison, 2015-08-07)<br /> * Marcin Izo (Stephen Harrison, 2015-08-07)<br /> * Steve Upton (Rob Voisey, 2015-08-11)<br /> * Frederic Sorgeloos (Rob Voisey, 2015-08-11)<br /> * Andrew Cooke (Rob Voisey, 2015-08-11)<br /> * Ned Booker (Rob Voisey, 2015-08-11)<br /> * Daryl Stewart (Paul Edgington, 2015-08-24)<br /> * Nacho Lopez (Paul Edgington, 2015-08-24)<br /> * Ed Robertson (Paul Edgington, 2015-08-24)<br /> * Clive Beale (Paul Edgington, 2015-08-24)<br /> * Oliver Fleck (Paul Edgington, 2015-08-24)<br /> * Mark Cheverton (Rob Voisey, 2015-09-08)<br /> * Nik (Rob Voisey, 2015-09-08)<br /> * Dan Tidhar (Rob Voisey, 2015-09-08)<br /> * Tobias Wenzel (Rob Voisey, 2015-09-08)<br /> * Brian Starkey (Rob Voisey, 2015-09-08)<br /> * Jonathan Waite (Rob Voisey, 2015-09-08)<br /> * Emyr James (Rob Voisey, 2015-09-08)<br /> * Richard Hall (Rob Voisey, 2015-09-08)<br /> * Andrew Dunn (Rob Voisey, 2015-09-08)<br /> * Andrea Cipri (Paul Edgington, 2015-09-30)<br /> * John Sidinopoulos (Paul Edgington, 2015-09-30)<br /> * Stuart Barton (Paul Edgington, 2015-09-30)<br /> * Mark Calleta (Paul Edgington, 2015-09-30)<br /> * Martin Lenz (Paul Edgington, 2015-09-30)<br /> * Phill Banks (Paul Edgington, 2015-10-21)<br /> * Felix Morley (Paul Edgington, 2015-10-21)<br /> * David Jordan (Paul Edgington, 2015-10-21)<br /> * Mark Roberts (Stephen Harrison, 2015-10-23)<br /> * Jenny Molloy (Stephen Harrison, 2015-10-23)<br /> * Henry Cawley (Rob Voisey, 2015-11-18)<br /> * Bogdan Spiridom (Rob Voisey, 2015-11-18)<br /> * Jakub Sanak (Rob Voisey, 2015-11-18)<br /> * Jack Brewster (Rob Voisey, 2015-11-18)<br /> * Mayke Santos (Rob Voisey, 2015-11-18)<br /> * Luis Veiga Pumar (Stephen Harrison, 2015-11-24)<br /> * Greg Matthews (Stephen Harrison, 2015-11-24)<br /> * Brian Corteil (Stephen Harrison, 2015-11-24)<br /> * Rob Rescorla (Stephen Harrison, 2015-11-24)<br /> * Leo Rones (Stephen Harrison, 2015-11-24)<br /> * Diana Probst (Stephen Harrison, 2015-11-25)<br /> * Adrian van den Heever (Stephen Harrison, 2015-11-25)<br /> * Al Napp (Stephen Harrison, 2015-11-25)<br /> * Katy Marshall (Stephen Harrison, 2015-12-01)<br /> * Peter Mottram (Stephen Harrison, 2015-12-01)<br /> * David Barham (Stephen Harrison, 2015-12-01)<br /> * Johan Henriksson­ (Stephen Harrison, 2015-12-01)<br /> * Fotis Fotiadis (Stephen Harrison, 2015-12-01)<br /> * Oliver Martin (Stephen Harrison, 2015-12-01)<br /> * Andrew Drummond (Stephen Harrison, 2015-12-01)<br /> * Spencer Dixon (Stephen Harrison, 2015-12-01)<br /> * Jonathan Woolf (Rob Voisey, 2016-01-07)<br /> * Daniel Bailey (Rob Voisey, 2016-01-07)<br /> * David Haines (Rob Voisey, 2016-01-07)<br /> * Giovanni Bisutii (Rob Voisey, 2016-01-07)<br /> * Simon Hartley (Daniel Bailey, 2016-02-11)<br /> * Francois Eve (Daniel Bailey, 2016-02-11)<br /> * Giovanni Orlando (Daniel Bailey, 2016-02-11)<br /> * Dan Tidhar (Daniel Bailey, 2016-02-11)<br /> * Shunsuke Fujibayash­i (Daniel Bailey, 2016-03-04)<br /> * Ronny Schlutter (Daniel Bailey, 2016-03-04)<br /> * Jamie Powell (Daniel Bailey, 2016-03-04)<br /> * Mark Wainwright (Daniel Bailey, 2016-03-04)<br /> * Charna Hume (Daniel Bailey, 2016-03-04)<br /> * Charlotte Godley (Daniel Bailey, 2016-03-04)<br /> * Jose Chitty (Stephen Harrison, 2016-03-22)<br /> * Mat Greenwood (Stephen Harrison, 2016-03-22)<br /> * David Fisher (Stephen Harrison, 2016-03-22)<br /> * Tom Kelly (Stephen Harrison, 2016-03-22)<br /> * David Bebb (Stephen Harrison, 2016-04-12)<br /> * David Taylor (Stephen Harrison, 2016-04-12)<br /> * Jo Brook (Stephen Harrison, 2016-04-12)<br /> * Craig Easton (Daniel Bailey, 2016-04-20)<br /> * James Griffiths (Daniel Bailey, 2016-04-20)<br /> * Paul Routley (Daniel Bailey, 2016-04-20)<br /> * Steve Murphy (Daniel Bailey, 2016-04-20)<br /> * Cong Cong Bo (Daniel Bailey, 2016-06-24)<br /> * Adrien Leger (Daniel Bailey, 2016-06-24)<br /> * David Marcus (Daniel Bailey, 2016-06-24)<br /> * Mik Lamming (Stephen Harrison, 2016-07-06)<br /> * Rob MacAulay (Stephen Harrison, 2016-07-06)<br /> * Daniel Farrant (Stephen Harrison, 2016-07-06)<br /> * Steve Carey (Stephen Harrison, 2016-07-06)<br /> * Debora Rodriguez (Daniel Bailey, 2016-07-30)<br /> * David Horsnell (Daniel Bailey, 2016-07-30)<br /> * Cat Fitzpatrick (Daniel Bailey, 2016-08-12)<br /> * Hsingling Lian (Daniel Bailey, 2016-08-12)<br /> * Jeremy Bentham (Daniel Bailey, 2016-08-12)<br /> * Nadia Bassiri (Daniel Bailey, 2016-08-12)<br /> * Thomas Wanger (Daniel Bailey, 2016-08-12)<br /> * Migual Morin (Stephen Harrison, 2016-09-23)<br /> * Eric Jones (Stephen Harrison, 2016-09-23)<br /> * Will Nock (Stephen Harrison, 2016-09-23)<br /> * Mihai Truta (Stephen Harrison, 2016-09-23)<br /> * Grawham Douglas (Stephen Harrison, 2016-09-23)<br /> * Hedley Simons (Stephen Harrison, 2016-10-20)<br /> * Ravan Keerthi (Stephen Harrison, 2016-10-20)<br /> * Richard Hosking (Stephen Harrison, 2016-11-14)<br /> * Zuke Heavens (Stephen Harrison, 2016-11-14)<br /> * Volker Eckert (Stephen Harrison, 2016-11-14)<br /> * Tian Huang (Stephen Harrison, 2016-11-14)<br /> * Craig Richardson (Stephen Harrison, 2016-11-14)<br /> * Charlie Stokes (Stephen Harrison, 2016-11-23)<br /> * Ben Brebner (Stephen Harrison, 2016-11-23)<br /> * Thomas Kopsch (Stephen Harrison, 2016-11-23)<br /> * Mateusz Kosturek (Stephen Harrison, 2016-11-23)<br /> * Alex Bate (Stephen Harrison, 2016-11-30)<br /> * Martha Levine (Stephen Harrison, 2016-11-30)<br /> * John Perdue (Stephen Harrison, 2016-11-30)<br /> * Carlos Pereira Atencio (Stephen Harrison, 2016-11-30)<br /> * Francisco Pelligar (Stephen Harrison, 2016-12-05)<br /> * Rick Smith (Stephen Harrison, 2016-12-05)<br /> * Mark Chapman (Stephen Harrison, 2016-12-05)<br /> * Peter Spencer (Stephen Harrison, 2016-12-05)<br /> * Josh Kaggie (Stephen Harrison, 2016-12-11)<br /> * Ian Spolton (Stephen Harrison, 2016-12-11)<br /> * Angela Birlea (Stephen Harrison, 2017-02-09)<br /> * Scott Cunliffe (Stephen Harrison, 2017-02-09)<br /> * Boyuan Xiao (Stephen Harrison, 2017-02-09)<br /> * Peter Molnar (Stephen Harrison, 2017-02-20)<br /> * Andy Clark (Stephen Harrison, 2017-02-09)<br /> * Nikolay Pchelintsev (Stephen Harrison, 2017-02-09)<br /> * Tim Rowsful (Stephen Harrison, 2017-03-02)<br /> * Joe Escott (Stephen Harrison, 2017-03-02)<br /> * Dean Kos (Stephen Harrison, 2017-03-02)<br /> * Despina Devoudani (Stephen Harrison, 2017-03-21)<br /> * John Doherty (Stephen Harrison, 2017-03-21)<br /> * Peter Murray-Rust (Stephen Harrison, 2017-03-21)<br /> * Tom Oinn (Stephen Harrison, 2017-03-21)<br /> * Rob Sandford (Will Nock, 2017-03-27)<br /> * Gemma Goodfellow (Will Nock, 2017-03-27)<br /> * Tommaso Leonardi (Will Nock, 2017-03-27)<br /> * Carlos Araque (Will Nock, 2017-03-27)<br /> * James Potter (Stephen Harrison, 2017-05-10)<br /> * Ian Guebert (Stephen Harrison, 2017-05-10)<br /> * Xorge Castro (Stephen Harrison, 2017-05-10)<br /> * George Agnew (Stephen Harrison, 2017-05-10)<br /> * Tom Feather (Stephen Harrison, 2017-05-10)<br /> * Simon Marache-Francisco (Will Nock, 2017-05-17)<br /> * Hardie Pienaar (Will Nock, 2017-05-17)<br /> * Moti Tabulo (Will Nock, 2017-05-17)<br /> * Andy Fisher (Will Nock, 2017-05-17)<br /> * Marie Besnier (Katy Marshall,2017-06-06)<br /> * Graskc Van Leeuwei (Katy Marshall,2017-06-06)<br /> * Lin Zheng (Katy Marshall,2017-06-06)<br /> * Jose Diez (Stephen Harrison, 2017-07-14)<br /> * Richard Green (Stephen Harrison, 2017-07-14)<br /> * Doroteja Maklin (Stephen Harrison, 2017-07-14)<br /> * Daniel Tovisi (Stephen Harrison, 2017-07-14)<br /> * Andrzej Kaczorowski (Stephen Harrison, 2017-07-14)<br /> * Laura James (Katy Marshall, 2017-07-20)<br /> * Michael Dales (Katy Marshall, 2017-07-20)<br /> * Sammy Mahdi (Katy Marshall, 2017-07-20)<br /> * Angus Main (Katy Marshall, 2017-07-20)<br /> * Jenni Main (Katy Marshall, 2017-07-24)<br /> * Sean Sleator (Katy Marshall, 2017-07-24)<br /> * Chammi Udalamatta (Katy Marshall, 2017-07-24)<br /> * Robert Lamont (Boyuan Xiao, 2017-07-26)<br /> * Alan Scott (Boyuan Xiao, 2017-07-26)<br /> * Juan Reyero (Boyuan Xiao, 2017-07-26)<br /> * Ross Henry (Boyuan Xiao, 2017-08-17)<br /> * Tom De C (Katy Marshall, 2017-09-25)<br /> * Joe Studwell (Katy Marshall, 2017-09-25)<br /> * Melanie T (Katy Marshall, 2017-09-25)<br /> * E.R. Canales-Canales (Katy Marshall, 2017-09-25)<br /> * Hideaki Page (Boyuan Xiao, 2017-10-11)<br /> * Matthew Timmons-Br­own (Boyuan Xiao, 2017-10-11)<br /> * Jana Grajciarova (Boyuan Xiao, 2017-10-11)<br /> * David Rodriguez (Boyuan Xiao, 2017-11-20)<br /> * Leonie Gärtner (Boyuan Xiao, 2017-11-20)<br /> * Richard Blakesley (Boyuan Xiao, 2017-11-20)<br /> * Israel Garcia (Boyuan Xiao, 2017-11-20)<br /> * Bryan Carroll (Stephen Harrison, 2018-02-12)<br /> * Edward Taylor (Stephen Harrison, 2018-02-12)<br /> * Hugh Steward (Stephen Harrison, 2018-02-12)<br /> * Julia Citron (Stephen Harrison, 2018-02-12)<br /> * Fai Poon (Stephen Harrison, 2018-02-12)<br /> * Erdem Kaya (Stephen Harrison, 2018-03-06)<br /> * Graeme Durant (Stephen Harrison, 2018-03-06)<br /> * Andrew Kadis (Stephen Harrison, 2018-03-06)<br /> * Adam St Ledger-honeybone (Stephen Harrison, 2018-03-07)<br /> * Phil McArthur (Stephen Harrison, 2018-03-07)<br /> * Ali Shirpour (Katy Marshall, 2018-03-08)<br /> * Mark Palmer (Katy Marshall, 2018-03-08)<br /> * Ashkan Ahmadi (Katy Marshall, 2018-03-08)<br /> * Robert Copcutt (Katy Marshall, 2018-03-08)<br /> * Adam Root (Katy Marshall, 2018-04-18)<br /> * Paul Elias (Katy Marshall, 2018-04-18)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/Laser_Cutter/Training 2018-04-17T12:55:51Z

<p>Kitkatmarshall: /* Yet more trained users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training<br /> <br /> = Laser Cutter Training =<br /> <br /> This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)<br /> <br /> Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.<br /> <br /> == Booking ==<br /> <br /> Sessions are advertised on '''http://meetup.makespace.org'''<br /> * For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]<br /> <br /> Notes:<br /> * You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)<br /> * You must do the group and individual training on the same day<br /> <br /> = Trained Users =<br /> <br /> The following members of Makespace are owner/trainers of the laser cutter:<br /> * Simon Ford<br /> * David Barham<br /> * Nick Johnson<br /> * Toby Moncaster<br /> * Martin de Selincourt<br /> * Mat Cook<br /> * [[User:stevancw|Stevan Wing]]<br /> <br /> The following members of Makespace are trainers on the laser cutter:<br /> * Brian Starkey<br /> * [[User:robv|Rob Voisey]]<br /> * Tom Parker<br /> * Steve Murphy<br /> * Katy Marshall<br /> <br /> The following members of Makespace are owners on the laser cutter:<br /> * Diana Probst<br /> <br /> <br /> The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):<br /> * Steve Upton (Simon Ford, 23/01/2013)<br /> * Martin de Selincourt (Simon Ford, 23/01/2013)<br /> * Oliver Jackson (Simon Ford, 23/01/2013)<br /> * Simon Stirley (Simon Ford, 01/02/2013)<br /> * Stephen Woolhead (Simon Ford, 01/02/2013)<br /> * Martin Levine (Simon Ford, 01/02/2013)<br /> * Uwe Borowski (Simon Ford, 01/02/2013)<br /> * Peter Sewell (Simon Ford, 03/02/2013)<br /> * Steve Loughran (Simon Ford, 03/02/2013)<br /> * ST John (Simon Ford, 03/02/2013)<br /> * Henry Gomersall (Simon Ford, 03/02/2013)<br /> * Brian Corteil (Simon Ford, 05/02/2013)<br /> * Wayne Keenan (Simon Ford, 05/02/2013)<br /> * Andrew Dunn (Simon Ford, 05/02/2013)<br /> * David Knell (Simon Ford, 05/02/2013)<br /> * Tom Oinn (David Barham, 12/02/2013)<br /> * Amir Chaudhry (David Barham, 12/02/2013)<br /> * Anil Madhavapeddy (David Barham, 12/02/2013)<br /> * Edward Imhagwe (David Barham, 12/02/2013)<br /> * Michael Dales (Simon Ford, 2/03/2013)<br /> * Laura James (Simon Ford, 2/03/2013)<br /> * Robert Copcutt (Simon Ford, 2/03/2013)<br /> * Phil Cowans (Simon Ford, 2/03/2013)<br /> * Errol McMullen (Simon Ford, 9/03/2013)<br /> * Gaye Soykok (Simon Ford, 19/03/2013)<br /> * Mark Williamson (Simon Ford, 19/03/2013) <br /> * Joe Tapply (Simon Ford, 19/03/2013)<br /> * Dan Ros (Simon Ford, 19/03/2013)<br /> * Paul Osborn (Simon Ford, 27/03/2013)<br /> * David Esteves (Simon Ford, 27/03/2013)<br /> * Zé Pinto Ferreira (Simon Ford, 27/03/2013) <br /> * Sharath (Simon Ford, 27/03/2013)<br /> * Andy Jude (Simon Ford, 5/04/2013)<br /> * Mark Mellors (Simon Ford, 5/04/2013)<br /> * Chris Abri (Simon Ford, 5/04/2013)<br /> * Tom Ingham (Simon Ford, 5/04/2013)<br /> * Adrian van den Heever (David Barham, 11/04/2013)<br /> * Chris Voth (David Barham, 11/04/2013)<br /> * Archie Reid (David Barham, 11/04/2013)<br /> * Rachel Rayns (David Barham, 11/04/2013)<br /> * Giovanni Orlando (David Barham, 15/04/2013)<br /> * Chunhe Yu (Nicholas Johnson, 04/04/2013)<br /> * Marko Cosic (Nicholas Johnson, 04/04/2013)<br /> * Mark Watson (Nicholas Johnson, 04/04/2013)<br /> * Andy Fisher (Nicholas Johnson, 02/05/2013)<br /> * David Bebb (Nicholas Johnson, 02/05/2013)<br /> * Simon Haydn (Nicholas Johnson, 02/05/2013)<br /> * Adrian Carr (Nicholas Johnson, 02/05/2013)<br /> * John Clamp (Nicholas Johnson, 10/05/2013)<br /> * Maciek Piatek (Nicholas Johnson, 10/05/2013)<br /> * Antonio Barragan (Nicholas Johnson, 10/05/2013)<br /> * John Sturdy (Nicholas Johnson, 10/05/2013)<br /> * Roeland Schumacher (Nicholas Johnson, 10/05/2013)<br /> * Mark Tillotson (Nicholas Johnson, 10/05/2013)<br /> * Ward Hills (Nicholas Johnson, 10/05/2013)<br /> * Anne Harrison (Nicholas Johnson, 17/05/2013)<br /> * William Morton (Nicholas Johnson, 17/05/2013)<br /> * Ali (Nicholas Johnson, 17/05/2013)<br /> * Rod Williams (Nicholas Johnson, 17/05/2013)<br /> * Toby Moncaster (Simon Ford, 30/5/2013)<br /> * Damien Guihen (David Barham, 08/06/2013)<br /> * Ben Evan (David Barham, 08/06/2013)<br /> * Jake Young (David Barham, 08/06/2013)<br /> * Shareef Jalloq (David Barham, 08/06/2013)<br /> * Renee Chow (David Barham, 08/06/2013)<br /> * Dan Tidhar, (David Barham, 24/6/2013)<br /> * Mat Cook, (David Barham, 24/6/2013)<br /> * Toby Roberts (David Barham, 24/6/2013)<br /> * Jonathan Austin (David Barham, 24/6/2013)<br /> * Stacy Smith (David Barham, 13/8/2013)<br /> * Matt Harvey (David Barham, 13/8/2013)<br /> * Marcin (David Barham, 13/8/2013)<br /> * James Waldmeyer (David Barham, 18/9/2013)<br /> * Chris Wilson (David Barham, 18/9/2013)<br /> * Kevin Maloney (David Barham, 18/9/2013)<br /> * Harry Braviner (David Barham, 18/9/2013)<br /> * Lee (David Barham, 18/9/2013)<br /> * Jon Aas (Toby Moncaster, 24/9/2013)<br /> * Armando Carlone (Toby Moncaster, 24/9/2013)<br /> * Eckart Jack (Toby Moncaster, 24/9/2013)<br /> * Pop Sharma (Toby Moncaster, 24/9/2013)<br /> * Anthony Wainman (Toby Moncaster, 13/10/13)<br /> * Hazel Jenkins (Toby Moncaster, 13/10/13)<br /> * James Hutton (Toby Moncaster, 13/10/13)<br /> * Jia Wei Lim (Toby Moncaster, 13/10/13)<br /> * Julius Schmidt (Toby Moncaster, 13/10/13)<br /> * Riccardo Gherardi (Toby Moncaster, 23/10/13)<br /> * Anna Stoilova (Toby Moncaster, 23/10/13)<br /> * Glyn Knowles (Toby Moncaster, 23/10/13)<br /> * James Cooke (Toby Moncaster, 23/10/13)<br /> * Jennifer Herbert (Toby Moncaster, 23/10/13)<br /> * Simon Birrell (Toby Moncaster, 23/10/13)<br /> * Theo Sanderson (Toby Moncaster, 23/10/13)<br /> * Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)<br /> * John Campbell (Toby Moncaster, 30/10/13)<br /> * Stephen Jeapes (Toby Moncaster, 30/10/13)<br /> * Chris Stanley (Toby Moncaster, 30/10/13)<br /> * Mat Greenwood (Toby Moncaster, 30/10/13)<br /> * Jonathon Brookfield (Toby Moncaster, 30/10/13)<br /> * Matt Grimes (Toby Moncaster, 30/10/13)<br /> * Richard Fosh (Toby Moncaster, 30/10/13)<br /> * Esther Leighton (Toby Moncaster, 30/10/13)<br /> * Katia Dilks (Toby Moncaster, 21/11/13)<br /> * Tim Dilks (Toby Moncaster, 21/11/13)<br /> * Alexander MacFaden (Toby Moncaster, 21/11/13)<br /> * Brian Starkey (Toby Moncaster, 21/11/13)<br /> * Dave Potts (Martin de Selincourt, 4/12/13)<br /> * Andy Spencer (Martin de Selincourt, 4/12/13)<br /> * Jon Green (Martin de Selincourt, 4/12/13)<br /> * Danny Garden (Martin de Selincourt, 4/12/13)<br /> * Steve Wiseman (Martin de Selincourt, 4/12/13)<br /> * Patrick Wollner (David Barham, 18/2/14)<br /> * Leonardo Impett (David Barham, 18/2/14)<br /> * Diana Probst (Brian Starkey, 19/3/14)<br /> * Hidde-Jan Lemstra (Brian Starkey, 19/3/14)<br /> * Francisco Cordobes (Brian Starkey, 19/3/14)<br /> * Peter Ferguson (Mat Cook March 5 2014)<br /> * Tim Hayward (Mat Cook March 5 2014)<br /> * Jason White (Mat Cook March 5 2014)<br /> * Stuart Wilson (Mat Cook March 5 2014)<br /> * Steve Harrison (Mat Cook March 5 2014)<br /> * Alex Atkinson (Mat Cook March 12 2014)<br /> * Kate Aston (Mat Cook March 12 2014)<br /> * Sheila Shepherd (Mat Cook March 12 2014)<br /> * Rachel Bow (Mat Cook March 12 2014)<br /> * Emyr James (Mat Cook March 12 2014)<br /> * Peter Knight (Mat Cook March 12 2014)<br /> * Andy Gale (Mat Cook March 26 2014)<br /> * Owen McAree (Mat Cook March 26 2014)<br /> * Michal Stefenow (Mat Cook March 26 2014)<br /> * Neil Tan (Mat Cook March 26 2014)<br /> * Vaiva Kalmkaite? (Mat Cook Apr 23 2014)<br /> * Alberto Santos (Mat Cook Apr 23 2014)<br /> * Sonny Siree (sp?) (Mat Cook Apr 23 2014)<br /> * Tim Ronsell (Mat Cook Apr 23 2014)<br /> * Rob Voisey (Mat Cook Apr 23 2014)<br /> * Mike Hunter (Mat Cook Apr 23 2014)<br /> * Tony Bunting (Brian Starkey 30/4/14)<br /> * Eric Jones (Brian Starkey 30/4/14)<br /> * Carl Phillips (Brian Starkey 30/4/14)<br /> * Ed Ben (Brian Starkey 30/4/14)<br /> * Toby Norman (Brian Starkey 30/4/14)<br /> * Marco Galardini (Mat Cook May 7 2014)<br /> * Thomas Keller (Mat Cook May 7 2014)<br /> * Martin Lenz (Mat Cook 28 May 2014)<br /> * David Grech (Mat Cook 28 May 2014)<br /> * Rick Lupton (Mat Cook 28 May 2014)<br /> * Tim Regan (Mat Cook 28 May 2014)<br /> * Shashank Srinivasan (Mat Cook 28 May 2014)<br /> * Al Napp (Mat Cook 4 June 2014)<br /> * Tom Roberts (Mat Cook 4 June 2014)<br /> * Matthew Taylor (Mat Cook 4 June 2014)<br /> * Milosz Wasilewski (Mat Cook 4 June 2014)<br /> * Matt Grimes (Brian Starkey 11/06/14)<br /> * Brandon Invergo (Brian Starkey 11/06/14)<br /> * Simon West (Brian Starkey 11/06/14)<br /> * Kevin Rathbone (Brian Starkey 11/06/14)<br /> * Richard Gordon (Brian Starkey 11/06/14)<br /> * Rob Yates (Brian Starkey 12/07/14)<br /> * Alex Gee (Brian Starkey 12/07/14)<br /> * Patrick Beigent (Brian Starkey 12/07/14)<br /> * Guilliame Tucker (Brian Starkey 12/07/14)<br /> * Jo Brook (Brian Starkey 12/07/14)<br /> * David Taylor (Brian Starkey 12/07/14)<br /> * Joe Watson (Brian Starkey 23/07/14)<br /> * Richard Armstrong (Brian Starkey 23/07/14)<br /> * Eric Gowland (Brian Starkey 23/07/14)<br /> * Paul Holland (Brian Starkey 23/07/14)<br /> * Craig Richardson (Brian Starkey 23/07/14)<br /> * Stevan Wing (Mat Cook 11/08/2014)<br /> * John Sidiropoulos (Mat Cook 11/08/2014)<br /> * Greaham Douglas (Stevan Wing 17/09/2014)<br /> * Joseph Gamble (Stevan Wing 17/09/2014)<br /> * Robert Fryers (Stevan Wing 17/09/2014)<br /> * Will Hartley (Stevan Wing 17/09/2014)<br /> * Alistair Turnbull (Stevan Wing 24/09/2014)<br /> * Tim Ramsdale (Stevan Wing 24/09/2014)<br /> * Hugo Van Sansen (Stevan Wing 24/09/2014) <br /> * Marco Aita (David Barham 08/10/2014)<br /> * Rob Shore (David Barham 08/10/2014)<br /> * Katy Marshall (David Barham 08/10/2014)<br /> * John Clarke (David Barham 08/10/2014)<br /> * Danny Farrant (Stevan Wing 15/10/2014)<br /> * John Ginger (Stevan Wing 15/10/2014)<br /> * Emilo Mont (Stevan Wing 15/10/2014)<br /> * Geoff Lunn (Stevan Wing 15/10/2014)<br /> * Milosch Meriac (Stevan Wing 05/11/2014)<br /> * Abhi Manyu (Stevan Wing 05/11/2014)<br /> * Alba Rodriguez (Stevan Wing 05/11/2014)<br /> * Stephen Paulger (Stevan Wing 05/11/2014)<br /> * Erik Pickering (Stevan Wing 05/11/2014)<br /> * Rob Meadows (Stevan Wing 03/12/2014)<br /> * Chris Mayhurst (Stevan Wing 03/12/2014)<br /> * Giovanni Orlando (Stevan Wing 03/12/2014)<br /> * Chris Padbury (Stevan Wing 03/12/2014)<br /> * Robin Sterling (Stevan Wing 03/12/2014)<br /> * Kristien De Clercq (Stevan Wing 03/12/2014)<br /> * &quot;Nevindep&quot; (Mat Cook 11 Dec 2014)<br /> * Jae Turner (Mat Cook 11 Dec 2014)<br /> * Luke Twydell (Mat Cook 11 Dec 2014)<br /> * Steph Tyszka (Mat Cook 20 Dec 2014)<br /> * Jonny Waite (Brian Starkey 3/9/14)<br /> * Toby Jaffey (Brian Starkey 3/9/14)<br /> * Greg Matthews (Brian Starkey 3/9/14)<br /> * Tom Parker (Brian Starkey 12/11/14)<br /> * Ben Weeks (Brian Starkey 12/11/14)<br /> * Clara Todd (Brian Starkey 17/12/14)<br /> * Ian Mc (Brian Starkey 17/12/14)<br /> * Timothy Baldock (Brian Starkey 17/12/14)<br /> * Rob Rescrola (Brian Starkey 7/1/15)<br /> * Tariq Harris (Brian Starkey 7/1/15)<br /> * Ed Robertson (Brian Starkey 7/1/15)<br /> * Imogen Ford (Brian Starkey 7/1/15)<br /> * Dan Tidhar (Brian Starkey 7/1/15)<br /> * Tom Stroud (Brian Starkey 28/1/15)<br /> * Graeme ??? (Brian Starkey 28/1/15)<br /> * Henry Begg (Brian Starkey 28/1/15)<br /> * Phil McArthur (Brian Starkey 28/1/15)<br /> * Alex Judd (Martin de Selincourt 11/02/2015)<br /> * Adam Mulligan (Martin de Selincourt 11/02/2015)<br /> * Adam Nightingale (Martin de Selincourt 11/02/2015)<br /> * Charlotte Harvey (Martin de Selincourt 11/02/2015)<br /> * Matt Wayland (Martin de Selincourt 11/02/2015)<br /> * Andrei R. (Martin de Selincourt 11/02/2015)<br /> * John Mead (Martin de Selincourt 11/02/2015)<br /> <br /> = More trained users =<br /> <br /> Fully trained:<br /> * Hugo Keene (Mat Cook 31/03/2015)<br /> * Antony Congedo (Mat Cook 31/03/2015)<br /> * Alina Velea (Mat Cook 31/03/2015)<br /> * Nik Newark (Brian Starkey 22/4/15)<br /> * Claire Harriette (Brian Starkey 22/4/15)<br /> * Dittany Rose (Brian Starkey 22/4/15)<br /> * Martin Prescott (Brian Starkey 22/4/15)<br /> * Abi Bush (Brian Starkey 6/05/2015)<br /> * Arik Kershenbaum (Brian Starkey 6/05/2015)<br /> * Alexandra Grigore (Brian Starkey 6/05/2015)<br /> * Roy Gwinn (Brian Starkey 6/05/2015)<br /> * Josh Kaggie (Brian Starkey 6/05/2015)<br /> * Stoyan Smoukov (Brian Starkey 6/05/2015)<br /> * Adam Reig (Stevan Wing 27/05/2015)<br /> * Nicola Westgarth-Flynn (Stevan Wing 27/05/2015)<br /> * Dave Jordan (Stevan Wing 27/05/2015)<br /> * Khameinei Ali (Stevan Wing 27/05/2015)<br /> * Fotis Georgatos (Stevan Wing 27/05/2015)<br /> * Tianheng Zhao (Stevan Wing 27/05/2015)<br /> * Oliver Fleck (Rob Voisey 16/06/2015)<br /> * Johan Henriksson (Rob Voisey 16/06/2015)<br /> * Daryl Stewart (Rob Voisey 16/06/2015)<br /> * Frodi Jones (Rob Voisey 16/06/2015)<br /> * Andrew Mulholland (Rob Voisey 16/06/2015)<br /> * Tobias Wenzel (Brian Starkey 19/06/2015)<br /> * Alex Ridge (Brian Starkey 19/06/2015)<br /> * Louis Kovalevsky (Brian Starkey 19/06/2015)<br /> * Rich Hall (Brian Starkey 19/06/2015)<br /> * Ben Alper (Brian Starkey 19/06/2015)<br /> * Chandu Sekhar (Brian Starkey 19/06/2015)<br /> * Patrick ? (Rob Voisey 23/06/2015)<br /> * Andrew Cooke (Rob Voisey 23/06/2015)<br /> * Rosy Hunt (Rob Voisey 23/06/2015)<br /> * Tim Radvan (Rob Voisey 23/06/2015)<br /> * Benjamin Thomas Summers (Rob Voisey 23/06/2015)<br /> * Tom Hartley (Rob Voisey 02/07/2015)<br /> * Lucia Corsini (Rob Voisey 02/07/2015)<br /> * Clive Beale (Brian Starkey 29/07/2015)<br /> * Tumi Jones (Brian Starkey 29/07/2015)<br /> * Daniel Bailey (Brian Starkey 29/07/2015)<br /> * Tom Garton (Brian Starkey 29/07/2015)<br /> * Alice Milligan (Brian Starkey 29/07/2015)<br /> * Phill Banks (Brian Starkey 4/08/2015)<br /> * Ned Booker (Brian Starkey 4/08/2015)<br /> * Karan Gupta (Brian Starkey 4/08/2015)<br /> * Dave Frost (Brian Starkey 4/08/2015)<br /> * Fred Sorgeloos (Brian Starkey 4/08/2015)<br /> * Abigail Tyrrell (Rob Voisey 27/11/2015)<br /> * David Jordan (Rob Voisey 27/11/2015)<br /> * Robyn Kerrison (Rob Voisey 27/11/2015)<br /> * Andrea Cipri (Rob Voisey 27/11/2015)<br /> * Jakub Sanak (Rob Voisey 27/11/2015)<br /> <br /> = Yet more trained users =<br /> <br /> * Training 18 Nov 2015 (Mat Cook)<br /> ** Jack Brewster<br /> ** Mark Wainwright<br /> ** Kate Aston (again)<br /> ** Mayke Santos<br /> ** Barry Plows<br /> ** Victor Rybnok - no show, not trained, not a fully inducted member<br /> * Training 05 Dec 2015 (Mat Cook)<br /> ** Leo Rines (needs keyfob fully activating)<br /> ** Naomi Griffiths<br /> ** Jose Chitty<br /> ** David Haines<br /> ** Simon Hartley<br /> * Bogdan Spiridon (17/9/15 Brian Starkey)<br /> * Stewart Barton (17/9/15 Brian Starkey)<br /> * Jonathan Hughes (17/9/15 Brian Starkey)<br /> * Anija Dokter (17/9/15 Brian Starkey)<br /> * Paul Bond (17/9/15 Brian Starkey)<br /> * Thomas Richardson (6/1/16 Brian Starkey)<br /> * William Deeks (6/1/16 Brian Starkey)<br /> * Jonathan Woolf (6/1/16 Brian Starkey)<br /> * Mark Radford (6/1/16 Brian Starkey)<br /> * Tom Kelly (6/1/16 Brian Starkey)<br /> * Giovanni Bisutti (6/1/16 Brian Starkey)<br /> * Victor Rybynok (2/2/16 David Barham)<br /> * Olivier Martin (2/2/16 David Barham)<br /> * Craig Easton (23/03/16 Brian Starkey)<br /> * Daniel Zerbino (23/03/16 Brian Starkey)<br /> * Jeremy Minton (23/03/16 Brian Starkey)<br /> * Shunsuke Fujibayashi (23/03/16 Brian Starkey)<br /> * Charna Hume (23/03/16 Brian Starkey)<br /> * Jamie Powell (23/03/16 Brian Starkey)<br /> * Thomas Gillepie (5/4/16 Tom Parker)<br /> * Mark Barnard (5/4/16 Tom Parker)<br /> * Francois Eve (18/04/16 Brian Starkey)<br /> * David Hurron (18/04/16 Brian Starkey)<br /> * Paul Routly (18/04/16 Brian Starkey)<br /> * Thomas Wagner (18/04/16 Brian Starkey)<br /> * Steve Carey (18/04/16 Brian Starkey)<br /> * Sophie Weeks (18/04/16 Brian Starkey)<br /> * Dan Evans (3/05/16 Tom Parker)<br /> * Thomas Grant (3/05/16 Tom Parker)<br /> * Thomas Arrow (3/05/16 Tom Parker)<br /> * David Marcus (3/05/16 Tom Parker)<br /> * Joe Halstead (3/05/16 Tom Parker)<br /> * Steve Murphy (3/05/16 Tom Parker)<br /> * Martin Hollis (3/05/16 Tom Parker)<br /> * Miguel Morin (21/06/16 Brian Starkey)<br /> * Cadu Miceli (21/06/16 Brian Starkey)<br /> * Joe Studwell (21/06/16 Brian Starkey)<br /> * Adrien Leger (21/06/16 Brian Starkey)<br /> * Mik Lamming (13/07/16 Brian Starkey)<br /> * Thomas Sanders (13/07/16 Brian Starkey)<br /> * Natalie Ward (13/07/16 Brian Starkey)<br /> * Ben Hurren (13/07/16 Brian Starkey)<br /> * Hsin-ling Liang (10/08/16 Brian Starkey)<br /> * Cat Fitzpatrick (10/08/16 Brian Starkey)<br /> * Michael Schmid (10/08/16 Brian Starkey)<br /> * Nadia Bassiri (10/08/16 Brian Starkey)<br /> * Htoo Wai Htet (10/08/16 Brian Starkey)<br /> * Spencer Wilson (10/08/16 Brian Starkey)<br /> * Thomas Ibbotson (01/08/16 Brian Starkey)<br /> * Ali King (01/08/16 Brian Starkey)<br /> * Mihai Truta (4/10/16 David Barham)<br /> * Simon Guest (4/10/16 David Barham)<br /> * Will Nock (4/10/16 David Barham)<br /> * Dan Tidhar (4/10/16 David Barham)<br /> * Ziyi Yu (4/10/16 David Barham)<br /> * David Crawford (4/10/16 David Barham)<br /> * Rick Amos (20/10/16 Steve Murphy)<br /> * Joe Eadon (20/10/16 Steve Murphy)<br /> * Ziyi Yu (20/10/16 Steve Murphy)<br /> * Brendan Cawley (20/10/16 Steve Murphy)<br /> * Joachim De Jonghe (20/10/16 Steve Murphy)<br /> * Arthur Queval (27/10/16 Steve Murphy)<br /> * Andy Saul (27/10/16 Steve Murphy)<br /> * Thomas Meany (27/10/16 Steve Murphy)<br /> * Ronny Schluetter (27/10/16 Steve Murphy)<br /> * Ben Brebner (27/10/16 Steve Murphy)<br /> * Scott Cunliffe (4/1/2017 Miguel Morin)<br /> * Tian Huang (4/1/2017 Miguel Morin)<br /> * Steven Burgess (4/1/2017 Miguel Morin)<br /> * James Potter (15/1/2017 Miguel Morin)<br /> * Ross Rounsevell (15/1/2017 Miguel Morin)<br /> * Abigail Wills (15/1/2017 Miguel Morin)<br /> * Lynne Horton (15/1/2017 Miguel Morin)<br /> * Andrew Velle (15/1/2017 Miguel Morin)<br /> * Thomas Kopsch (15/1/2017 Miguel Morin)<br /> * Dario Bressan (12/2/2017 Miguel Morin)<br /> * Lisa Smith (12/2/2017 Miguel Morin)<br /> * Luke Heavens (12/2/2017 Miguel Morin)<br /> * Lucy Copping (12/2/2017 Miguel Morin)<br /> * Tobias Herold (02/03/2017 Tom Parker)<br /> * Chloe Thomas (02/03/2017 Tom Parker)<br /> * Hugh Craft (02/03/2017 Tom Parker)<br /> * Angela Birlea (02/03/2017 Tom Parker)<br /> * Gemma Goodfellow (28/03/2017 David Barham)<br /> * Mark Williamson (28/03/2017 David Barham)<br /> * Steven Penney (28/03/2017 David Barham)<br /> * Simon Marache-Francisco (28/03/2017 David Barham)<br /> * Tommaso Leonardi (15/04/2017 Miguel Morin)<br /> * Rasko Leinonen (15/04/2017 Miguel Morin)<br /> * Arnet Addis (15/04/2017 Miguel Morin)<br /> * James O'Sul­livan (15/04/2017 Miguel Morin)<br /> * Training 6 May 2017 (Miguel Morin)<br /> ** Carlos Araque<br /> ** Ian Guebert<br /> ** Richard Dwan<br /> * Peter Murray-Rus­t (7/6/17 Tom Parker)<br /> * Hardie Pienaar (7/6/17 Tom Parker)<br /> * Rob Sandford (7/6/17 Tom Parker)<br /> * Despina Davoudani (7/6/17 Tom Parker)<br /> * Training 22 July 2017 (Miguel Morin)<br /> ** Richard Blakesley<br /> ** Doroteja Maklin<br /> ** Daniel Attila Tovisi<br /> ** Alex Johannsson<br /> * Trained 15 August 2017 (David Barham)<br /> ** Andy Clark<br /> ** Jenni Main<br /> ** Angus Main<br /> ** Richard Seymour<br /> ** Becky Warren<br /> ** Sean Sleator<br /> ** Lucy Shipp<br /> * Geraint (+Tom) Davies(2017-09-07 Brian Starkey)<br /> * Ed Taylor (2017-09-07 Brian Starkey)<br /> * Juan Reyero (2017-09-07 Brian Starkey)<br /> * Roberto Canales (2017-09-07 Brian Starkey)<br /> * Jeanette Friggebo (2017-09-07 Brian Starkey)<br /> * Bryan Caroll (2017-09-07 Brian Starkey)<br /> * Trained 13 Sept 2017 (Katy Marshall / David Barham)<br /> ** David Rodriguez<br /> ** Matthew Timmons-Brown<br /> ** Joanna Brunker<br /> ** Marcel Gehrung<br /> * Trained 19 Sept 2017 (Katy Marshall)<br /> ** Chammi Udalamatta<br /> * Trained 02 October 2017 (Katy Marshall)<br /> ** Robert Lamont<br /> ** Melanie T<br /> ** Tom Le Cheminont<br /> ** Tunde Szentes<br /> * Trained 31 October 2017 (Katy Marshall)<br /> ** Dionysis Athinaios<br /> ** Leonie Gärtner<br /> ** Israel Garcia<br /> ** Graeme Durant<br /> ** David Hay<br /> * Trained 16 Nov 2017 (David Barham)<br /> ** Aurelien Brocchi<br /> * Edward Colby (2018-03-13 Brian Starkey)<br /> * James Griffiths (2018-03-13 Brian Starkey)<br /> * Frances Brandon (2018-03-13 Brian Starkey)<br /> * Ian Galpin (2018-03-27 Brian Starkey)<br /> * Niamh Lenihan (2018-03-27 Brian Starkey)<br /> * Travis Butler (2018-03-27 Brian Starkey)<br /> * Andrew Kadis (2018-03-27 Brian Starkey)<br /> * Michal Lachowicz (2018-03-27 Brian Starkey)<br /> * Phil McArthur (2018-03-27 Brian Starkey)<br /> * Eleanor Davies (2018-04-14 Katy Marshall)<br /> * Ashkan Ahmadi (2018-04-14 Katy Marshall)<br /> <br /> = Training Cheatsheet =<br /> <br /> The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.<br /> <br /> == Group Training ==<br /> <br /> The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.<br /> <br /> Introduction of main components<br /> * Laser<br /> * Cutting Mechanics<br /> * Water Cooler System<br /> * Filter<br /> * PC<br /> * Materials (what it can cut, supply)<br /> <br /> Checks for everyone to do<br /> * Check in use, looks ok<br /> * Check water bath, temperature<br /> <br /> Powering Up<br /> * Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)<br /> * Turning on Laser and warmup, what to do if doesn't power up<br /> * Turning on PC and starting software<br /> <br /> LaserCut Project walkthrough (using M+S+text keyring example)<br /> * Package function, drawing, import file types<br /> * Bed dimensions<br /> * Paths, yellow dots, 'united' shapes<br /> * Blue dot, Immediate mode<br /> * Layers and colours<br /> * Through cut, surface cut and engraving, speeds and strengths<br /> * Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)<br /> * Job ordering <br /> * Saving<br /> * Download as immediate, delete, download current<br /> <br /> Laser Operation<br /> * Lid<br /> * Control panel, escape<br /> * Moving head XY, indicator laser, datum<br /> * Moving Z<br /> * Focus<br /> * Start position and test<br /> * Start, pause and emergency stop function<br /> * Do job, pause/open lid, restart<br /> <br /> Laser Hazards<br /> * Process and progression for normal operation failure (fire) - pause, open, move, CO2 <br /> * Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2<br /> * Ensure confident of process<br /> <br /> Power Down<br /> * Switch off laser<br /> * Switch off filtration<br /> * Clean any residue from the bed or bottom tray<br /> * Close lid<br /> <br /> == Individual Training Task ==<br /> <br /> The individual task to get familiar, prompt questions and check understanding:<br /> <br /> Task<br /> * Make a personalised focus tool<br /> * Square acrylic of appropriate size<br /> * Member's name, &quot;Focus Tool&quot;, keychain hole<br /> * Should use full cut, surface cut, engrave<br /> * Should demonstrate all steps, size, appropriate ordering, positioning<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to lasering (watch carefully all steps)<br /> * Ask to stop job/restart, question escalation process<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Add to the trained member list!<br /> <br /> == Project Oversight ==<br /> <br /> For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/3D_Printer/UM2Training 2018-03-12T12:26:46Z

<p>Kitkatmarshall: /* Trained Users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/3D Printer|UM2]] / Training<br /> <br /> = Ultimaker 2 3D Printer Training =<br /> <br /> This page documents the process for being trained on the Ultimaker 2 Printer, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~20min each)<br /> * Recommended project oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)<br /> <br /> A shorter conversion training session is available for members who were previously signed off to use the Makerbot 2X printer. These sessions last around 20 minutes and do not include individual sessions.<br /> <br /> == Booking ==<br /> <br /> For discussing and arranging slots, please use the mailing list. New training sessions will be announced on the Meetup group.<br /> <br /> Notes:<br /> * You can only be trained if you have RSVP'd to a Meetup session<br /> <br /> == Training Cheatsheet - Conversion Course ==<br /> <br /> Members already trained on and familiar with the Makerbot 2X can attend this short conversion course to be signed off to use the Ultimaker 2 3D printer. Up to 10 people can be accommodated on each course, which lasts 20 to 30 minutes.<br /> <br /> 1. Physical Differences from the 2X<br /> * Glass build plate, no kapton tape<br /> * Single extruder<br /> * Push feed<br /> <br /> 2. General<br /> * Use the correct filament (2.85mm, NOT 3mm or 1.75mm)<br /> * New filament storage system<br /> <br /> 3. Printing<br /> * Fence / Brim / Raft<br /> * OK to leave printer unattended after the first few layers<br /> * Camera available for remote monitoring<br /> * Use only plastic implements for part removal, take care not to melt them on the hot end<br /> <br /> 4. Cura Software<br /> * Import and place<br /> * Simple mode<br /> * Brief overview of advanced mode<br /> * Temperature set on printer not slicer<br /> * Exporting to SD card<br /> <br /> 5. Unload / Load filament<br /> * How to feed (slow first, then fast)<br /> * Select correct material in menu<br /> * Changing temperature and speed parameters from printer<br /> * Demonstrate the atomic method of cleaning the extruder to prevent feed jams<br /> <br /> 6. Filament pricing<br /> * 5p per gram for PLA and ABS, to be kept under review<br /> * Include wastage!<br /> <br /> == Training Cheatsheet - Full Course ==<br /> <br /> '''Group Session'''<br /> <br /> 1. Ask what each member hopes to get out of the 3D printer.<br /> <br /> 2. Explain how 3D printing works<br /> <br /> 3. Safety<br /> * Burn hazard – nozzle and build plate<br /> * Unit may move unexpectedly<br /> * Avoid prolonged exposure to ABS fumes<br /> <br /> 4. Damage to machine<br /> * Fragile build plate<br /> * Jammed filament<br /> <br /> 5. General<br /> * Use the correct filament (2.85mm)<br /> * Filament storage and feed system<br /> * Switch off when finished<br /> * Leave levelling to the owners but report any problems<br /> <br /> 6. PLA vs ABS<br /> * How to tell the difference<br /> * Different temperature<br /> * PLA Biodegradable<br /> * See the Wiki for tips on printing with ABS and cleaning after<br /> <br /> 7. Software / workflow<br /> * Importing<br /> * Positioning on bed<br /> * Supports<br /> * Setting quality / speed trade off<br /> * Advanced options<br /> * Exporting to SD card<br /> * Wiki for tips on Cura<br /> <br /> 8. Unload / load<br /> * Check filament for damadge, cut filament at an angle (see Wiki for problems when loading)<br /> * Attaching spool. Ensure correct direction and not tangled<br /> * Feeding (slow then fast)<br /> * Beware of wrapping round axle<br /> * Setting material in menu<br /> * Adjusting parameters, e.g. ABS plate temperature<br /> <br /> 9. Printing<br /> * Preheating<br /> * Fence printing<br /> * Keep an eye on progress, locally or with camera<br /> * If leaving unattended, put a post-it (or badger) with your contact details<br /> * Use only plastic implements for part removal<br /> <br /> 10. Other stuff<br /> * Demonstrate atomic method of cleaning the nozzle to prevent feed jams<br /> * Strength characteristics – orientation is important<br /> * '''Paying'''<br /> <br /> '''Individual Training Task'''<br /> <br /> Task<br /> * Should demonstrate import, setup, position and run<br /> * Choose a part that takes about 10 mins to print (preloaded on PC)<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to printing (watch carefully all steps)<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Highlight the wiki for more information and owners email address on poster<br /> * Add to the trained member list<br /> <br /> '''Project Oversight'''<br /> <br /> For next 2-3 projects, recommend member will find another more experienced trained user to support them (second pair of eyes)<br /> <br /> '''Record Training On Wiki'''<br /> <br /> <br /> == Please write your name clearly below ==<br /> <br /> * The trainer will add you to the Trained Users page on the Wiki but can't do that if they are unable to read your name.<br /> * Please remember to check the Wiki for tips and updates on using the Ultimaker.<br /> <br /> Date of training:<br /> <br /> == Trained Users ==<br /> <br /> The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):<br /> <br /> * Paul Osborn (Rob Voisey, 2015-07-30)<br /> * Julius Schmidt (Rob Voisey, 2015-07-30)<br /> * Peter Knight (Rob Voisey, 2015-07-30)<br /> * Adam Mulligan (Rob Voisey, 2015-07-30)<br /> * Charlotte Harvey (Rob Voisey, 2015-07-30)<br /> * Alex Gee (Rob Voisey, 2015-07-30)<br /> * Albert Santos (Rob Voisey, 2015-07-30)<br /> * Zizwani Mhango (Rob Voisey, 2015-07-30)<br /> * Christie Nel (Rob Voisey, 2015-07-30)<br /> * Robert Karpinski (Rob Voisey, 2015-07-30)<br /> * Alexis Mather (Stephen Harrison, 2015-08-03)<br /> * Ben Wheatley (Stephen Harrison, 2015-08-03)<br /> * Stevan Wing (Stephen Harrison, 2015-08-03)<br /> * Jae Tumer (Stephen Harrison, 2015-08-03)<br /> * Jennifer Herbert (Stephen Harrison, 2015-08-03)<br /> * Frodi Jones (Stephen Harrison, 2015-08-03)<br /> * Matt Wayland (Stephen Harrison, 2015-08-03)<br /> * Marco Aite (Stephen Harrison, 2015-08-03)<br /> * Graeham Douglas (Stephen Harrison, 2015-08-03)<br /> * Robin Sterling (Stephen Harrison, 2015-08-07)<br /> * Abhi Manyu (Stephen Harrison, 2015-08-07)<br /> * Ward Hills (Stephen Harrison, 2015-08-07)<br /> * Carols A. Lugo (Stephen Harrison, 2015-08-07)<br /> * Ben Alper (Stephen Harrison, 2015-08-07)<br /> * Jon Green (Stephen Harrison, 2015-08-07)<br /> * Marcin Izo (Stephen Harrison, 2015-08-07)<br /> * Steve Upton (Rob Voisey, 2015-08-11)<br /> * Frederic Sorgeloos (Rob Voisey, 2015-08-11)<br /> * Andrew Cooke (Rob Voisey, 2015-08-11)<br /> * Ned Booker (Rob Voisey, 2015-08-11)<br /> * Daryl Stewart (Paul Edgington, 2015-08-24)<br /> * Nacho Lopez (Paul Edgington, 2015-08-24)<br /> * Ed Robertson (Paul Edgington, 2015-08-24)<br /> * Clive Beale (Paul Edgington, 2015-08-24)<br /> * Oliver Fleck (Paul Edgington, 2015-08-24)<br /> * Mark Cheverton (Rob Voisey, 2015-09-08)<br /> * Nik (Rob Voisey, 2015-09-08)<br /> * Dan Tidhar (Rob Voisey, 2015-09-08)<br /> * Tobias Wenzel (Rob Voisey, 2015-09-08)<br /> * Brian Starkey (Rob Voisey, 2015-09-08)<br /> * Jonathan Waite (Rob Voisey, 2015-09-08)<br /> * Emyr James (Rob Voisey, 2015-09-08)<br /> * Richard Hall (Rob Voisey, 2015-09-08)<br /> * Andrew Dunn (Rob Voisey, 2015-09-08)<br /> * Andrea Cipri (Paul Edgington, 2015-09-30)<br /> * John Sidinopoulos (Paul Edgington, 2015-09-30)<br /> * Stuart Barton (Paul Edgington, 2015-09-30)<br /> * Mark Calleta (Paul Edgington, 2015-09-30)<br /> * Martin Lenz (Paul Edgington, 2015-09-30)<br /> * Phill Banks (Paul Edgington, 2015-10-21)<br /> * Felix Morley (Paul Edgington, 2015-10-21)<br /> * David Jordan (Paul Edgington, 2015-10-21)<br /> * Mark Roberts (Stephen Harrison, 2015-10-23)<br /> * Jenny Molloy (Stephen Harrison, 2015-10-23)<br /> * Henry Cawley (Rob Voisey, 2015-11-18)<br /> * Bogdan Spiridom (Rob Voisey, 2015-11-18)<br /> * Jakub Sanak (Rob Voisey, 2015-11-18)<br /> * Jack Brewster (Rob Voisey, 2015-11-18)<br /> * Mayke Santos (Rob Voisey, 2015-11-18)<br /> * Luis Veiga Pumar (Stephen Harrison, 2015-11-24)<br /> * Greg Matthews (Stephen Harrison, 2015-11-24)<br /> * Brian Corteil (Stephen Harrison, 2015-11-24)<br /> * Rob Rescorla (Stephen Harrison, 2015-11-24)<br /> * Leo Rones (Stephen Harrison, 2015-11-24)<br /> * Diana Probst (Stephen Harrison, 2015-11-25)<br /> * Adrian van den Heever (Stephen Harrison, 2015-11-25)<br /> * Al Napp (Stephen Harrison, 2015-11-25)<br /> * Katy Marshall (Stephen Harrison, 2015-12-01)<br /> * Peter Mottram (Stephen Harrison, 2015-12-01)<br /> * David Barham (Stephen Harrison, 2015-12-01)<br /> * Johan Henriksson­ (Stephen Harrison, 2015-12-01)<br /> * Fotis Fotiadis (Stephen Harrison, 2015-12-01)<br /> * Oliver Martin (Stephen Harrison, 2015-12-01)<br /> * Andrew Drummond (Stephen Harrison, 2015-12-01)<br /> * Spencer Dixon (Stephen Harrison, 2015-12-01)<br /> * Jonathan Woolf (Rob Voisey, 2016-01-07)<br /> * Daniel Bailey (Rob Voisey, 2016-01-07)<br /> * David Haines (Rob Voisey, 2016-01-07)<br /> * Giovanni Bisutii (Rob Voisey, 2016-01-07)<br /> * Simon Hartley (Daniel Bailey, 2016-02-11)<br /> * Francois Eve (Daniel Bailey, 2016-02-11)<br /> * Giovanni Orlando (Daniel Bailey, 2016-02-11)<br /> * Dan Tidhar (Daniel Bailey, 2016-02-11)<br /> * Shunsuke Fujibayash­i (Daniel Bailey, 2016-03-04)<br /> * Ronny Schlutter (Daniel Bailey, 2016-03-04)<br /> * Jamie Powell (Daniel Bailey, 2016-03-04)<br /> * Mark Wainwright (Daniel Bailey, 2016-03-04)<br /> * Charna Hume (Daniel Bailey, 2016-03-04)<br /> * Charlotte Godley (Daniel Bailey, 2016-03-04)<br /> * Jose Chitty (Stephen Harrison, 2016-03-22)<br /> * Mat Greenwood (Stephen Harrison, 2016-03-22)<br /> * David Fisher (Stephen Harrison, 2016-03-22)<br /> * Tom Kelly (Stephen Harrison, 2016-03-22)<br /> * David Bebb (Stephen Harrison, 2016-04-12)<br /> * David Taylor (Stephen Harrison, 2016-04-12)<br /> * Jo Brook (Stephen Harrison, 2016-04-12)<br /> * Craig Easton (Daniel Bailey, 2016-04-20)<br /> * James Griffiths (Daniel Bailey, 2016-04-20)<br /> * Paul Routley (Daniel Bailey, 2016-04-20)<br /> * Steve Murphy (Daniel Bailey, 2016-04-20)<br /> * Cong Cong Bo (Daniel Bailey, 2016-06-24)<br /> * Adrien Leger (Daniel Bailey, 2016-06-24)<br /> * David Marcus (Daniel Bailey, 2016-06-24)<br /> * Mik Lamming (Stephen Harrison, 2016-07-06)<br /> * Rob MacAulay (Stephen Harrison, 2016-07-06)<br /> * Daniel Farrant (Stephen Harrison, 2016-07-06)<br /> * Steve Carey (Stephen Harrison, 2016-07-06)<br /> * Debora Rodriguez (Daniel Bailey, 2016-07-30)<br /> * David Horsnell (Daniel Bailey, 2016-07-30)<br /> * Cat Fitzpatrick (Daniel Bailey, 2016-08-12)<br /> * Hsingling Lian (Daniel Bailey, 2016-08-12)<br /> * Jeremy Bentham (Daniel Bailey, 2016-08-12)<br /> * Nadia Bassiri (Daniel Bailey, 2016-08-12)<br /> * Thomas Wanger (Daniel Bailey, 2016-08-12)<br /> * Migual Morin (Stephen Harrison, 2016-09-23)<br /> * Eric Jones (Stephen Harrison, 2016-09-23)<br /> * Will Nock (Stephen Harrison, 2016-09-23)<br /> * Mihai Truta (Stephen Harrison, 2016-09-23)<br /> * Grawham Douglas (Stephen Harrison, 2016-09-23)<br /> * Hedley Simons (Stephen Harrison, 2016-10-20)<br /> * Ravan Keerthi (Stephen Harrison, 2016-10-20)<br /> * Richard Hosking (Stephen Harrison, 2016-11-14)<br /> * Zuke Heavens (Stephen Harrison, 2016-11-14)<br /> * Volker Eckert (Stephen Harrison, 2016-11-14)<br /> * Tian Huang (Stephen Harrison, 2016-11-14)<br /> * Craig Richardson (Stephen Harrison, 2016-11-14)<br /> * Charlie Stokes (Stephen Harrison, 2016-11-23)<br /> * Ben Brebner (Stephen Harrison, 2016-11-23)<br /> * Thomas Kopsch (Stephen Harrison, 2016-11-23)<br /> * Mateusz Kosturek (Stephen Harrison, 2016-11-23)<br /> * Alex Bate (Stephen Harrison, 2016-11-30)<br /> * Martha Levine (Stephen Harrison, 2016-11-30)<br /> * John Perdue (Stephen Harrison, 2016-11-30)<br /> * Carlos Pereira Atencio (Stephen Harrison, 2016-11-30)<br /> * Francisco Pelligar (Stephen Harrison, 2016-12-05)<br /> * Rick Smith (Stephen Harrison, 2016-12-05)<br /> * Mark Chapman (Stephen Harrison, 2016-12-05)<br /> * Peter Spencer (Stephen Harrison, 2016-12-05)<br /> * Josh Kaggie (Stephen Harrison, 2016-12-11)<br /> * Ian Spolton (Stephen Harrison, 2016-12-11)<br /> * Angela Birlea (Stephen Harrison, 2017-02-09)<br /> * Scott Cunliffe (Stephen Harrison, 2017-02-09)<br /> * Boyuan Xiao (Stephen Harrison, 2017-02-09)<br /> * Peter Molnar (Stephen Harrison, 2017-02-20)<br /> * Andy Clark (Stephen Harrison, 2017-02-09)<br /> * Nikolay Pchelintsev (Stephen Harrison, 2017-02-09)<br /> * Tim Rowsful (Stephen Harrison, 2017-03-02)<br /> * Joe Escott (Stephen Harrison, 2017-03-02)<br /> * Dean Kos (Stephen Harrison, 2017-03-02)<br /> * Despina Devoudani (Stephen Harrison, 2017-03-21)<br /> * John Doherty (Stephen Harrison, 2017-03-21)<br /> * Peter Murray-Rust (Stephen Harrison, 2017-03-21)<br /> * Tom Oinn (Stephen Harrison, 2017-03-21)<br /> * Rob Sandford (Will Nock, 2017-03-27)<br /> * Gemma Goodfellow (Will Nock, 2017-03-27)<br /> * Tommaso Leonardi (Will Nock, 2017-03-27)<br /> * Carlos Araque (Will Nock, 2017-03-27)<br /> * James Potter (Stephen Harrison, 2017-05-10)<br /> * Ian Guebert (Stephen Harrison, 2017-05-10)<br /> * Xorge Castro (Stephen Harrison, 2017-05-10)<br /> * George Agnew (Stephen Harrison, 2017-05-10)<br /> * Tom Feather (Stephen Harrison, 2017-05-10)<br /> * Simon Marache-Francisco (Will Nock, 2017-05-17)<br /> * Hardie Pienaar (Will Nock, 2017-05-17)<br /> * Moti Tabulo (Will Nock, 2017-05-17)<br /> * Andy Fisher (Will Nock, 2017-05-17)<br /> * Marie Besnier (Katy Marshall,2017-06-06)<br /> * Graskc Van Leeuwei (Katy Marshall,2017-06-06)<br /> * Lin Zheng (Katy Marshall,2017-06-06)<br /> * Jose Diez (Stephen Harrison, 2017-07-14)<br /> * Richard Green (Stephen Harrison, 2017-07-14)<br /> * Doroteja Maklin (Stephen Harrison, 2017-07-14)<br /> * Daniel Tovisi (Stephen Harrison, 2017-07-14)<br /> * Andrzej Kaczorowski (Stephen Harrison, 2017-07-14)<br /> * Laura James (Katy Marshall, 2017-07-20)<br /> * Michael Dales (Katy Marshall, 2017-07-20)<br /> * Sammy Mahdi (Katy Marshall, 2017-07-20)<br /> * Angus Main (Katy Marshall, 2017-07-20)<br /> * Jenni Main (Katy Marshall, 2017-07-24)<br /> * Sean Sleator (Katy Marshall, 2017-07-24)<br /> * Chammi Udalamatta (Katy Marshall, 2017-07-24)<br /> * Robert Lamont (Boyuan Xiao, 2017-07-26)<br /> * Alan Scott (Boyuan Xiao, 2017-07-26)<br /> * Juan Reyero (Boyuan Xiao, 2017-07-26)<br /> * Ross Henry (Boyuan Xiao, 2017-08-17)<br /> * Tom De C (Katy Marshall, 2017-09-25)<br /> * Joe Studwell (Katy Marshall, 2017-09-25)<br /> * Melanie T (Katy Marshall, 2017-09-25)<br /> * E.R. Canales-Canales (Katy Marshall, 2017-09-25)<br /> * Hideaki Page (Boyuan Xiao, 2017-10-11)<br /> * Matthew Timmons-Br­own (Boyuan Xiao, 2017-10-11)<br /> * Jana Grajciarova (Boyuan Xiao, 2017-10-11)<br /> * David Rodriguez (Boyuan Xiao, 2017-11-20)<br /> * Leonie Gärtner (Boyuan Xiao, 2017-11-20)<br /> * Richard Blakesley (Boyuan Xiao, 2017-11-20)<br /> * Israel Garcia (Boyuan Xiao, 2017-11-20)<br /> * Bryan Carroll (Stephen Harrison, 2018-02-12)<br /> * Edward Taylor (Stephen Harrison, 2018-02-12)<br /> * Hugh Steward (Stephen Harrison, 2018-02-12)<br /> * Julia Citron (Stephen Harrison, 2018-02-12)<br /> * Fai Poon (Stephen Harrison, 2018-02-12)<br /> * Erdem Kaya (Stephen Harrison, 2018-03-06)<br /> * Graeme Durant (Stephen Harrison, 2018-03-06)<br /> * Andrew Kadis (Stephen Harrison, 2018-03-06)<br /> * Adam St Ledger-honeybone (Stephen Harrison, 2018-03-07)<br /> * Phil McArthur (Stephen Harrison, 2018-03-07)<br /> * Ali Shirpour (Katy Marshall, 2018-03-08)<br /> * Mark Palmer (Katy Marshall, 2018-03-08)<br /> * Ashkan Ahmadi (Katy Marshall, 2018-03-08)<br /> * Robert Copcutt (Katy Marshall, 2018-03-08)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/Laser_Cutter/Training 2017-11-04T16:27:17Z

<p>Kitkatmarshall: /* Yet more trained users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training<br /> <br /> = Laser Cutter Training =<br /> <br /> This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)<br /> <br /> Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.<br /> <br /> == Booking ==<br /> <br /> Sessions are advertised on '''http://meetup.makespace.org'''<br /> * For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]<br /> <br /> Notes:<br /> * You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)<br /> * You must do the group and individual training on the same day<br /> <br /> = Trained Users =<br /> <br /> The following members of Makespace are owner/trainers of the laser cutter:<br /> * Simon Ford<br /> * David Barham<br /> * Nick Johnson<br /> * Toby Moncaster<br /> * Martin de Selincourt<br /> * Mat Cook<br /> * [[User:stevancw|Stevan Wing]]<br /> <br /> The following members of Makespace are trainers on the laser cutter:<br /> * Brian Starkey<br /> * [[User:robv|Rob Voisey]]<br /> * Tom Parker<br /> * Steve Murphy<br /> * Katy Marshall<br /> <br /> The following members of Makespace are owners on the laser cutter:<br /> * Diana Probst<br /> <br /> <br /> The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):<br /> * Steve Upton (Simon Ford, 23/01/2013)<br /> * Martin de Selincourt (Simon Ford, 23/01/2013)<br /> * Oliver Jackson (Simon Ford, 23/01/2013)<br /> * Simon Stirley (Simon Ford, 01/02/2013)<br /> * Stephen Woolhead (Simon Ford, 01/02/2013)<br /> * Martin Levine (Simon Ford, 01/02/2013)<br /> * Uwe Borowski (Simon Ford, 01/02/2013)<br /> * Peter Sewell (Simon Ford, 03/02/2013)<br /> * Steve Loughran (Simon Ford, 03/02/2013)<br /> * ST John (Simon Ford, 03/02/2013)<br /> * Henry Gomersall (Simon Ford, 03/02/2013)<br /> * Brian Corteil (Simon Ford, 05/02/2013)<br /> * Wayne Keenan (Simon Ford, 05/02/2013)<br /> * Andrew Dunn (Simon Ford, 05/02/2013)<br /> * David Knell (Simon Ford, 05/02/2013)<br /> * Tom Oinn (David Barham, 12/02/2013)<br /> * Amir Chaudhry (David Barham, 12/02/2013)<br /> * Anil Madhavapeddy (David Barham, 12/02/2013)<br /> * Edward Imhagwe (David Barham, 12/02/2013)<br /> * Michael Dales (Simon Ford, 2/03/2013)<br /> * Laura James (Simon Ford, 2/03/2013)<br /> * Robert Copcutt (Simon Ford, 2/03/2013)<br /> * Phil Cowans (Simon Ford, 2/03/2013)<br /> * Errol McMullen (Simon Ford, 9/03/2013)<br /> * Gaye Soykok (Simon Ford, 19/03/2013)<br /> * Mark Williamson (Simon Ford, 19/03/2013) <br /> * Joe Tapply (Simon Ford, 19/03/2013)<br /> * Dan Ros (Simon Ford, 19/03/2013)<br /> * Paul Osborn (Simon Ford, 27/03/2013)<br /> * David Esteves (Simon Ford, 27/03/2013)<br /> * Zé Pinto Ferreira (Simon Ford, 27/03/2013) <br /> * Sharath (Simon Ford, 27/03/2013)<br /> * Andy Jude (Simon Ford, 5/04/2013)<br /> * Mark Mellors (Simon Ford, 5/04/2013)<br /> * Chris Abri (Simon Ford, 5/04/2013)<br /> * Tom Ingham (Simon Ford, 5/04/2013)<br /> * Adrian van den Heever (David Barham, 11/04/2013)<br /> * Chris Voth (David Barham, 11/04/2013)<br /> * Archie Reid (David Barham, 11/04/2013)<br /> * Rachel Rayns (David Barham, 11/04/2013)<br /> * Giovanni Orlando (David Barham, 15/04/2013)<br /> * Chunhe Yu (Nicholas Johnson, 04/04/2013)<br /> * Marko Cosic (Nicholas Johnson, 04/04/2013)<br /> * Mark Watson (Nicholas Johnson, 04/04/2013)<br /> * Andy Fisher (Nicholas Johnson, 02/05/2013)<br /> * David Bebb (Nicholas Johnson, 02/05/2013)<br /> * Simon Haydn (Nicholas Johnson, 02/05/2013)<br /> * Adrian Carr (Nicholas Johnson, 02/05/2013)<br /> * John Clamp (Nicholas Johnson, 10/05/2013)<br /> * Maciek Piatek (Nicholas Johnson, 10/05/2013)<br /> * Antonio Barragan (Nicholas Johnson, 10/05/2013)<br /> * John Sturdy (Nicholas Johnson, 10/05/2013)<br /> * Roeland Schumacher (Nicholas Johnson, 10/05/2013)<br /> * Mark Tillotson (Nicholas Johnson, 10/05/2013)<br /> * Ward Hills (Nicholas Johnson, 10/05/2013)<br /> * Anne Harrison (Nicholas Johnson, 17/05/2013)<br /> * William Morton (Nicholas Johnson, 17/05/2013)<br /> * Ali (Nicholas Johnson, 17/05/2013)<br /> * Rod Williams (Nicholas Johnson, 17/05/2013)<br /> * Toby Moncaster (Simon Ford, 30/5/2013)<br /> * Damien Guihen (David Barham, 08/06/2013)<br /> * Ben Evan (David Barham, 08/06/2013)<br /> * Jake Young (David Barham, 08/06/2013)<br /> * Shareef Jalloq (David Barham, 08/06/2013)<br /> * Renee Chow (David Barham, 08/06/2013)<br /> * Dan Tidhar, (David Barham, 24/6/2013)<br /> * Mat Cook, (David Barham, 24/6/2013)<br /> * Toby Roberts (David Barham, 24/6/2013)<br /> * Jonathan Austin (David Barham, 24/6/2013)<br /> * Stacy Smith (David Barham, 13/8/2013)<br /> * Matt Harvey (David Barham, 13/8/2013)<br /> * Marcin (David Barham, 13/8/2013)<br /> * James Waldmeyer (David Barham, 18/9/2013)<br /> * Chris Wilson (David Barham, 18/9/2013)<br /> * Kevin Maloney (David Barham, 18/9/2013)<br /> * Harry Braviner (David Barham, 18/9/2013)<br /> * Lee (David Barham, 18/9/2013)<br /> * Jon Aas (Toby Moncaster, 24/9/2013)<br /> * Armando Carlone (Toby Moncaster, 24/9/2013)<br /> * Eckart Jack (Toby Moncaster, 24/9/2013)<br /> * Pop Sharma (Toby Moncaster, 24/9/2013)<br /> * Anthony Wainman (Toby Moncaster, 13/10/13)<br /> * Hazel Jenkins (Toby Moncaster, 13/10/13)<br /> * James Hutton (Toby Moncaster, 13/10/13)<br /> * Jia Wei Lim (Toby Moncaster, 13/10/13)<br /> * Julius Schmidt (Toby Moncaster, 13/10/13)<br /> * Riccardo Gherardi (Toby Moncaster, 23/10/13)<br /> * Anna Stoilova (Toby Moncaster, 23/10/13)<br /> * Glyn Knowles (Toby Moncaster, 23/10/13)<br /> * James Cooke (Toby Moncaster, 23/10/13)<br /> * Jennifer Herbert (Toby Moncaster, 23/10/13)<br /> * Simon Birrell (Toby Moncaster, 23/10/13)<br /> * Theo Sanderson (Toby Moncaster, 23/10/13)<br /> * Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)<br /> * John Campbell (Toby Moncaster, 30/10/13)<br /> * Stephen Jeapes (Toby Moncaster, 30/10/13)<br /> * Chris Stanley (Toby Moncaster, 30/10/13)<br /> * Mat Greenwood (Toby Moncaster, 30/10/13)<br /> * Jonathon Brookfield (Toby Moncaster, 30/10/13)<br /> * Matt Grimes (Toby Moncaster, 30/10/13)<br /> * Richard Fosh (Toby Moncaster, 30/10/13)<br /> * Esther Leighton (Toby Moncaster, 30/10/13)<br /> * Katia Dilks (Toby Moncaster, 21/11/13)<br /> * Tim Dilks (Toby Moncaster, 21/11/13)<br /> * Alexander MacFaden (Toby Moncaster, 21/11/13)<br /> * Brian Starkey (Toby Moncaster, 21/11/13)<br /> * Dave Potts (Martin de Selincourt, 4/12/13)<br /> * Andy Spencer (Martin de Selincourt, 4/12/13)<br /> * Jon Green (Martin de Selincourt, 4/12/13)<br /> * Danny Garden (Martin de Selincourt, 4/12/13)<br /> * Steve Wiseman (Martin de Selincourt, 4/12/13)<br /> * Patrick Wollner (David Barham, 18/2/14)<br /> * Leonardo Impett (David Barham, 18/2/14)<br /> * Diana Probst (Brian Starkey, 19/3/14)<br /> * Hidde-Jan Lemstra (Brian Starkey, 19/3/14)<br /> * Francisco Cordobes (Brian Starkey, 19/3/14)<br /> * Peter Ferguson (Mat Cook March 5 2014)<br /> * Tim Hayward (Mat Cook March 5 2014)<br /> * Jason White (Mat Cook March 5 2014)<br /> * Stuart Wilson (Mat Cook March 5 2014)<br /> * Steve Harrison (Mat Cook March 5 2014)<br /> * Alex Atkinson (Mat Cook March 12 2014)<br /> * Kate Aston (Mat Cook March 12 2014)<br /> * Sheila Shepherd (Mat Cook March 12 2014)<br /> * Rachel Bow (Mat Cook March 12 2014)<br /> * Emyr James (Mat Cook March 12 2014)<br /> * Peter Knight (Mat Cook March 12 2014)<br /> * Andy Gale (Mat Cook March 26 2014)<br /> * Owen McAree (Mat Cook March 26 2014)<br /> * Michal Stefenow (Mat Cook March 26 2014)<br /> * Neil Tan (Mat Cook March 26 2014)<br /> * Vaiva Kalmkaite? (Mat Cook Apr 23 2014)<br /> * Alberto Santos (Mat Cook Apr 23 2014)<br /> * Sonny Siree (sp?) (Mat Cook Apr 23 2014)<br /> * Tim Ronsell (Mat Cook Apr 23 2014)<br /> * Rob Voisey (Mat Cook Apr 23 2014)<br /> * Mike Hunter (Mat Cook Apr 23 2014)<br /> * Tony Bunting (Brian Starkey 30/4/14)<br /> * Eric Jones (Brian Starkey 30/4/14)<br /> * Carl Phillips (Brian Starkey 30/4/14)<br /> * Ed Ben (Brian Starkey 30/4/14)<br /> * Toby Norman (Brian Starkey 30/4/14)<br /> * Marco Galardini (Mat Cook May 7 2014)<br /> * Thomas Keller (Mat Cook May 7 2014)<br /> * Martin Lenz (Mat Cook 28 May 2014)<br /> * David Grech (Mat Cook 28 May 2014)<br /> * Rick Lupton (Mat Cook 28 May 2014)<br /> * Tim Regan (Mat Cook 28 May 2014)<br /> * Shashank Srinivasan (Mat Cook 28 May 2014)<br /> * Al Napp (Mat Cook 4 June 2014)<br /> * Tom Roberts (Mat Cook 4 June 2014)<br /> * Matthew Taylor (Mat Cook 4 June 2014)<br /> * Milosz Wasilewski (Mat Cook 4 June 2014)<br /> * Matt Grimes (Brian Starkey 11/06/14)<br /> * Brandon Invergo (Brian Starkey 11/06/14)<br /> * Simon West (Brian Starkey 11/06/14)<br /> * Kevin Rathbone (Brian Starkey 11/06/14)<br /> * Richard Gordon (Brian Starkey 11/06/14)<br /> * Rob Yates (Brian Starkey 12/07/14)<br /> * Alex Gee (Brian Starkey 12/07/14)<br /> * Patrick Beigent (Brian Starkey 12/07/14)<br /> * Guilliame Tucker (Brian Starkey 12/07/14)<br /> * Jo Brook (Brian Starkey 12/07/14)<br /> * David Taylor (Brian Starkey 12/07/14)<br /> * Joe Watson (Brian Starkey 23/07/14)<br /> * Richard Armstrong (Brian Starkey 23/07/14)<br /> * Eric Gowland (Brian Starkey 23/07/14)<br /> * Paul Holland (Brian Starkey 23/07/14)<br /> * Craig Richardson (Brian Starkey 23/07/14)<br /> * Stevan Wing (Mat Cook 11/08/2014)<br /> * John Sidiropoulos (Mat Cook 11/08/2014)<br /> * Greaham Douglas (Stevan Wing 17/09/2014)<br /> * Joseph Gamble (Stevan Wing 17/09/2014)<br /> * Robert Fryers (Stevan Wing 17/09/2014)<br /> * Will Hartley (Stevan Wing 17/09/2014)<br /> * Alistair Turnbull (Stevan Wing 24/09/2014)<br /> * Tim Ramsdale (Stevan Wing 24/09/2014)<br /> * Hugo Van Sansen (Stevan Wing 24/09/2014) <br /> * Marco Aita (David Barham 08/10/2014)<br /> * Rob Shore (David Barham 08/10/2014)<br /> * Katy Marshall (David Barham 08/10/2014)<br /> * John Clarke (David Barham 08/10/2014)<br /> * Danny Farrant (Stevan Wing 15/10/2014)<br /> * John Ginger (Stevan Wing 15/10/2014)<br /> * Emilo Mont (Stevan Wing 15/10/2014)<br /> * Geoff Lunn (Stevan Wing 15/10/2014)<br /> * Milosch Meriac (Stevan Wing 05/11/2014)<br /> * Abhi Manyu (Stevan Wing 05/11/2014)<br /> * Alba Rodriguez (Stevan Wing 05/11/2014)<br /> * Stephen Paulger (Stevan Wing 05/11/2014)<br /> * Erik Pickering (Stevan Wing 05/11/2014)<br /> * Rob Meadows (Stevan Wing 03/12/2014)<br /> * Chris Mayhurst (Stevan Wing 03/12/2014)<br /> * Giovanni Orlando (Stevan Wing 03/12/2014)<br /> * Chris Padbury (Stevan Wing 03/12/2014)<br /> * Robin Sterling (Stevan Wing 03/12/2014)<br /> * Kristien De Clercq (Stevan Wing 03/12/2014)<br /> * &quot;Nevindep&quot; (Mat Cook 11 Dec 2014)<br /> * Jae Turner (Mat Cook 11 Dec 2014)<br /> * Luke Twydell (Mat Cook 11 Dec 2014)<br /> * Steph Tyszka (Mat Cook 20 Dec 2014)<br /> * Jonny Waite (Brian Starkey 3/9/14)<br /> * Toby Jaffey (Brian Starkey 3/9/14)<br /> * Greg Matthews (Brian Starkey 3/9/14)<br /> * Tom Parker (Brian Starkey 12/11/14)<br /> * Ben Weeks (Brian Starkey 12/11/14)<br /> * Clara Todd (Brian Starkey 17/12/14)<br /> * Ian Mc (Brian Starkey 17/12/14)<br /> * Timothy Baldock (Brian Starkey 17/12/14)<br /> * Rob Rescrola (Brian Starkey 7/1/15)<br /> * Tariq Harris (Brian Starkey 7/1/15)<br /> * Ed Robertson (Brian Starkey 7/1/15)<br /> * Imogen Ford (Brian Starkey 7/1/15)<br /> * Dan Tidhar (Brian Starkey 7/1/15)<br /> * Tom Stroud (Brian Starkey 28/1/15)<br /> * Graeme ??? (Brian Starkey 28/1/15)<br /> * Henry Begg (Brian Starkey 28/1/15)<br /> * Phil McArthur (Brian Starkey 28/1/15)<br /> * Alex Judd (Martin de Selincourt 11/02/2015)<br /> * Adam Mulligan (Martin de Selincourt 11/02/2015)<br /> * Adam Nightingale (Martin de Selincourt 11/02/2015)<br /> * Charlotte Harvey (Martin de Selincourt 11/02/2015)<br /> * Matt Wayland (Martin de Selincourt 11/02/2015)<br /> * Andrei R. (Martin de Selincourt 11/02/2015)<br /> * John Mead (Martin de Selincourt 11/02/2015)<br /> <br /> = More trained users =<br /> <br /> Fully trained:<br /> * Hugo Keene (Mat Cook 31/03/2015)<br /> * Antony Congedo (Mat Cook 31/03/2015)<br /> * Alina Velea (Mat Cook 31/03/2015)<br /> * Nik Newark (Brian Starkey 22/4/15)<br /> * Claire Harriette (Brian Starkey 22/4/15)<br /> * Dittany Rose (Brian Starkey 22/4/15)<br /> * Martin Prescott (Brian Starkey 22/4/15)<br /> * Abi Bush (Brian Starkey 6/05/2015)<br /> * Arik Kershenbaum (Brian Starkey 6/05/2015)<br /> * Alexandra Grigore (Brian Starkey 6/05/2015)<br /> * Roy Gwinn (Brian Starkey 6/05/2015)<br /> * Josh Kaggie (Brian Starkey 6/05/2015)<br /> * Stoyan Smoukov (Brian Starkey 6/05/2015)<br /> * Adam Reig (Stevan Wing 27/05/2015)<br /> * Nicola Westgarth-Flynn (Stevan Wing 27/05/2015)<br /> * Dave Jordan (Stevan Wing 27/05/2015)<br /> * Khameinei Ali (Stevan Wing 27/05/2015)<br /> * Fotis Georgatos (Stevan Wing 27/05/2015)<br /> * Tianheng Zhao (Stevan Wing 27/05/2015)<br /> * Oliver Fleck (Rob Voisey 16/06/2015)<br /> * Johan Henriksson (Rob Voisey 16/06/2015)<br /> * Daryl Stewart (Rob Voisey 16/06/2015)<br /> * Frodi Jones (Rob Voisey 16/06/2015)<br /> * Andrew Mulholland (Rob Voisey 16/06/2015)<br /> * Tobias Wenzel (Brian Starkey 19/06/2015)<br /> * Alex Ridge (Brian Starkey 19/06/2015)<br /> * Louis Kovalevsky (Brian Starkey 19/06/2015)<br /> * Rich Hall (Brian Starkey 19/06/2015)<br /> * Ben Alper (Brian Starkey 19/06/2015)<br /> * Chandu Sekhar (Brian Starkey 19/06/2015)<br /> * Patrick ? (Rob Voisey 23/06/2015)<br /> * Andrew Cooke (Rob Voisey 23/06/2015)<br /> * Rosy Hunt (Rob Voisey 23/06/2015)<br /> * Tim Radvan (Rob Voisey 23/06/2015)<br /> * Benjamin Thomas Summers (Rob Voisey 23/06/2015)<br /> * Tom Hartley (Rob Voisey 02/07/2015)<br /> * Lucia Corsini (Rob Voisey 02/07/2015)<br /> * Clive Beale (Brian Starkey 29/07/2015)<br /> * Tumi Jones (Brian Starkey 29/07/2015)<br /> * Daniel Bailey (Brian Starkey 29/07/2015)<br /> * Tom Garton (Brian Starkey 29/07/2015)<br /> * Alice Milligan (Brian Starkey 29/07/2015)<br /> * Phill Banks (Brian Starkey 4/08/2015)<br /> * Ned Booker (Brian Starkey 4/08/2015)<br /> * Karan Gupta (Brian Starkey 4/08/2015)<br /> * Dave Frost (Brian Starkey 4/08/2015)<br /> * Fred Sorgeloos (Brian Starkey 4/08/2015)<br /> * Abigail Tyrrell (Rob Voisey 27/11/2015)<br /> * David Jordan (Rob Voisey 27/11/2015)<br /> * Robyn Kerrison (Rob Voisey 27/11/2015)<br /> * Andrea Cipri (Rob Voisey 27/11/2015)<br /> * Jakub Sanak (Rob Voisey 27/11/2015)<br /> <br /> = Yet more trained users =<br /> <br /> * Training 18 Nov 2015 (Mat Cook)<br /> ** Jack Brewster<br /> ** Mark Wainwright<br /> ** Kate Aston (again)<br /> ** Mayke Santos<br /> ** Barry Plows<br /> ** Victor Rybnok - no show, not trained, not a fully inducted member<br /> * Training 05 Dec 2015 (Mat Cook)<br /> ** Leo Rines (needs keyfob fully activating)<br /> ** Naomi Griffiths<br /> ** Jose Chitty<br /> ** David Haines<br /> ** Simon Hartley<br /> * Bogdan Spiridon (17/9/15 Brian Starkey)<br /> * Stewart Barton (17/9/15 Brian Starkey)<br /> * Jonathan Hughes (17/9/15 Brian Starkey)<br /> * Anija Dokter (17/9/15 Brian Starkey)<br /> * Paul Bond (17/9/15 Brian Starkey)<br /> * Thomas Richardson (6/1/16 Brian Starkey)<br /> * William Deeks (6/1/16 Brian Starkey)<br /> * Jonathan Woolf (6/1/16 Brian Starkey)<br /> * Mark Radford (6/1/16 Brian Starkey)<br /> * Tom Kelly (6/1/16 Brian Starkey)<br /> * Giovanni Bisutti (6/1/16 Brian Starkey)<br /> * Victor Rybynok (2/2/16 David Barham)<br /> * Olivier Martin (2/2/16 David Barham)<br /> * Craig Easton (23/03/16 Brian Starkey)<br /> * Daniel Zerbino (23/03/16 Brian Starkey)<br /> * Jeremy Minton (23/03/16 Brian Starkey)<br /> * Shunsuke Fujibayashi (23/03/16 Brian Starkey)<br /> * Charna Hume (23/03/16 Brian Starkey)<br /> * Jamie Powell (23/03/16 Brian Starkey)<br /> * Thomas Gillepie (5/4/16 Tom Parker)<br /> * Mark Barnard (5/4/16 Tom Parker)<br /> * Francois Eve (18/04/16 Brian Starkey)<br /> * David Hurron (18/04/16 Brian Starkey)<br /> * Paul Routly (18/04/16 Brian Starkey)<br /> * Thomas Wagner (18/04/16 Brian Starkey)<br /> * Steve Carey (18/04/16 Brian Starkey)<br /> * Sophie Weeks (18/04/16 Brian Starkey)<br /> * Dan Evans (3/05/16 Tom Parker)<br /> * Thomas Grant (3/05/16 Tom Parker)<br /> * Thomas Arrow (3/05/16 Tom Parker)<br /> * David Marcus (3/05/16 Tom Parker)<br /> * Joe Halstead (3/05/16 Tom Parker)<br /> * Steve Murphy (3/05/16 Tom Parker)<br /> * Martin Hollis (3/05/16 Tom Parker)<br /> * Miguel Morin (21/06/16 Brian Starkey)<br /> * Cadu Miceli (21/06/16 Brian Starkey)<br /> * Joe Studwell (21/06/16 Brian Starkey)<br /> * Adrien Leger (21/06/16 Brian Starkey)<br /> * Mik Lamming (13/07/16 Brian Starkey)<br /> * Thomas Sanders (13/07/16 Brian Starkey)<br /> * Natalie Ward (13/07/16 Brian Starkey)<br /> * Ben Hurren (13/07/16 Brian Starkey)<br /> * Hsin-ling Liang (10/08/16 Brian Starkey)<br /> * Cat Fitzpatrick (10/08/16 Brian Starkey)<br /> * Michael Schmid (10/08/16 Brian Starkey)<br /> * Nadia Bassiri (10/08/16 Brian Starkey)<br /> * Htoo Wai Htet (10/08/16 Brian Starkey)<br /> * Spencer Wilson (10/08/16 Brian Starkey)<br /> * Mihai Truta (4/10/16 David Barham)<br /> * Simon Guest (4/10/16 David Barham)<br /> * Will Nock (4/10/16 David Barham)<br /> * Dan Tidhar (4/10/16 David Barham)<br /> * Ziyi Yu (4/10/16 David Barham)<br /> * David Crawford (4/10/16 David Barham)<br /> * Rick Amos (20/10/16 Steve Murphy)<br /> * Joe Eadon (20/10/16 Steve Murphy)<br /> * Ziyi Yu (20/10/16 Steve Murphy)<br /> * Brendan Cawley (20/10/16 Steve Murphy)<br /> * Joachim De Jonghe (20/10/16 Steve Murphy)<br /> * Arthur Queval (27/10/16 Steve Murphy)<br /> * Andy Saul (27/10/16 Steve Murphy)<br /> * Thomas Meany (27/10/16 Steve Murphy)<br /> * Ronny Schluetter (27/10/16 Steve Murphy)<br /> * Ben Brebner (27/10/16 Steve Murphy)<br /> * Scott Cunliffe (4/1/2017 Miguel Morin)<br /> * Tian Huang (4/1/2017 Miguel Morin)<br /> * Steven Burgess (4/1/2017 Miguel Morin)<br /> * James Potter (15/1/2017 Miguel Morin)<br /> * Ross Rounsevell (15/1/2017 Miguel Morin)<br /> * Abigail Wills (15/1/2017 Miguel Morin)<br /> * Lynne Horton (15/1/2017 Miguel Morin)<br /> * Andrew Velle (15/1/2017 Miguel Morin)<br /> * Thomas Kopsch (15/1/2017 Miguel Morin)<br /> * Dario Bressan (12/2/2017 Miguel Morin)<br /> * Lisa Smith (12/2/2017 Miguel Morin)<br /> * Luke Heavens (12/2/2017 Miguel Morin)<br /> * Lucy Copping (12/2/2017 Miguel Morin)<br /> * Tobias Herold (02/03/2017 Tom Parker)<br /> * Chloe Thomas (02/03/2017 Tom Parker)<br /> * Hugh Craft (02/03/2017 Tom Parker)<br /> * Angela Birlea (02/03/2017 Tom Parker)<br /> * Gemma Goodfellow (28/03/2017 David Barham)<br /> * Mark Williamson (28/03/2017 David Barham)<br /> * Steven Penney (28/03/2017 David Barham)<br /> * Simon Marache-Francisco (28/03/2017 David Barham)<br /> * Tommaso Leonardi (15/04/2017 Miguel Morin)<br /> * Rasko Leinonen (15/04/2017 Miguel Morin)<br /> * Arnet Addis (15/04/2017 Miguel Morin)<br /> * James O'Sul­livan (15/04/2017 Miguel Morin)<br /> * Training 6 May 2017 (Miguel Morin)<br /> ** Carlos Araque<br /> ** Ian Guebert<br /> ** Richard Dwan<br /> * Peter Murray-Rus­t (7/6/17 Tom Parker)<br /> * Hardie Pienaar (7/6/17 Tom Parker)<br /> * Rob Sandford (7/6/17 Tom Parker)<br /> * Despina Davoudani (7/6/17 Tom Parker)<br /> * Training 22 July 2017 (Miguel Morin)<br /> ** Richard Blakesley<br /> ** Doroteja Maklin<br /> ** Daniel Attila Tovisi<br /> ** Alex Johannsson<br /> * Trained 15 August 2017 (David Barham)<br /> ** Andy Clark<br /> ** Jenni Main<br /> ** Angus Main<br /> ** Richard Seymour<br /> ** Becky Warren<br /> ** Sean Sleator<br /> ** Lucy Shipp<br /> * Trained 13 Sept 2017 (Katy Marshall / David Barham)<br /> ** David Rodriguez<br /> ** Matthew Timmons-Brown<br /> ** Joanna Brunker<br /> ** Marcel Gehrung<br /> * Trained 19 Sept 2017 (Katy Marshall)<br /> ** Chammi Udalamatta<br /> * Trained 02 October 2017 (Katy Marshall)<br /> ** Robert Lamont<br /> ** Melanie T<br /> ** Tom Le Cheminont<br /> ** Tunde Szentes<br /> * Trained 31 October 2017 (Katy Marshall)<br /> ** Dionysis Athinaios<br /> ** Leonie Gärtner<br /> ** Israel Garcia<br /> ** Graeme Durant<br /> ** David Hay<br /> <br /> = Training Cheatsheet =<br /> <br /> The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.<br /> <br /> == Group Training ==<br /> <br /> The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.<br /> <br /> Introduction of main components<br /> * Laser<br /> * Cutting Mechanics<br /> * Water Cooler System<br /> * Filter<br /> * PC<br /> * Materials (what it can cut, supply)<br /> <br /> Checks for everyone to do<br /> * Check in use, looks ok<br /> * Check water bath, temperature<br /> <br /> Powering Up<br /> * Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)<br /> * Turning on Laser and warmup, what to do if doesn't power up<br /> * Turning on PC and starting software<br /> <br /> LaserCut Project walkthrough (using M+S+text keyring example)<br /> * Package function, drawing, import file types<br /> * Bed dimensions<br /> * Paths, yellow dots, 'united' shapes<br /> * Blue dot, Immediate mode<br /> * Layers and colours<br /> * Through cut, surface cut and engraving, speeds and strengths<br /> * Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)<br /> * Job ordering <br /> * Saving<br /> * Download as immediate, delete, download current<br /> <br /> Laser Operation<br /> * Lid<br /> * Control panel, escape<br /> * Moving head XY, indicator laser, datum<br /> * Moving Z<br /> * Focus<br /> * Start position and test<br /> * Start, pause and emergency stop function<br /> * Do job, pause/open lid, restart<br /> <br /> Laser Hazards<br /> * Process and progression for normal operation failure (fire) - pause, open, move, CO2 <br /> * Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2<br /> * Ensure confident of process<br /> <br /> Power Down<br /> * Switch off laser<br /> * Switch off filtration<br /> * Clean any residue from the bed or bottom tray<br /> * Close lid<br /> <br /> == Individual Training Task ==<br /> <br /> The individual task to get familiar, prompt questions and check understanding:<br /> <br /> Task<br /> * Make a personalised focus tool<br /> * Square acrylic of appropriate size<br /> * Member's name, &quot;Focus Tool&quot;, keychain hole<br /> * Should use full cut, surface cut, engrave<br /> * Should demonstrate all steps, size, appropriate ordering, positioning<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to lasering (watch carefully all steps)<br /> * Ask to stop job/restart, question escalation process<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Add to the trained member list!<br /> <br /> == Project Oversight ==<br /> <br /> For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/Laser_Cutter/Training 2017-10-03T12:14:16Z

<p>Kitkatmarshall: /* Yet more trained users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training<br /> <br /> = Laser Cutter Training =<br /> <br /> This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)<br /> <br /> Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.<br /> <br /> == Booking ==<br /> <br /> Sessions are advertised on '''http://meetup.makespace.org'''<br /> * For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]<br /> <br /> Notes:<br /> * You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)<br /> * You must do the group and individual training on the same day<br /> <br /> = Trained Users =<br /> <br /> The following members of Makespace are owner/trainers of the laser cutter:<br /> * Simon Ford<br /> * David Barham<br /> * Nick Johnson<br /> * Toby Moncaster<br /> * Martin de Selincourt<br /> * Mat Cook<br /> * [[User:stevancw|Stevan Wing]]<br /> <br /> The following members of Makespace are trainers on the laser cutter:<br /> * Brian Starkey<br /> * [[User:robv|Rob Voisey]]<br /> * Tom Parker<br /> * Steve Murphy<br /> * Katy Marshall<br /> <br /> The following members of Makespace are owners on the laser cutter:<br /> * Diana Probst<br /> <br /> <br /> The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):<br /> * Steve Upton (Simon Ford, 23/01/2013)<br /> * Martin de Selincourt (Simon Ford, 23/01/2013)<br /> * Oliver Jackson (Simon Ford, 23/01/2013)<br /> * Simon Stirley (Simon Ford, 01/02/2013)<br /> * Stephen Woolhead (Simon Ford, 01/02/2013)<br /> * Martin Levine (Simon Ford, 01/02/2013)<br /> * Uwe Borowski (Simon Ford, 01/02/2013)<br /> * Peter Sewell (Simon Ford, 03/02/2013)<br /> * Steve Loughran (Simon Ford, 03/02/2013)<br /> * ST John (Simon Ford, 03/02/2013)<br /> * Henry Gomersall (Simon Ford, 03/02/2013)<br /> * Brian Corteil (Simon Ford, 05/02/2013)<br /> * Wayne Keenan (Simon Ford, 05/02/2013)<br /> * Andrew Dunn (Simon Ford, 05/02/2013)<br /> * David Knell (Simon Ford, 05/02/2013)<br /> * Tom Oinn (David Barham, 12/02/2013)<br /> * Amir Chaudhry (David Barham, 12/02/2013)<br /> * Anil Madhavapeddy (David Barham, 12/02/2013)<br /> * Edward Imhagwe (David Barham, 12/02/2013)<br /> * Michael Dales (Simon Ford, 2/03/2013)<br /> * Laura James (Simon Ford, 2/03/2013)<br /> * Robert Copcutt (Simon Ford, 2/03/2013)<br /> * Phil Cowans (Simon Ford, 2/03/2013)<br /> * Errol McMullen (Simon Ford, 9/03/2013)<br /> * Gaye Soykok (Simon Ford, 19/03/2013)<br /> * Mark Williamson (Simon Ford, 19/03/2013) <br /> * Joe Tapply (Simon Ford, 19/03/2013)<br /> * Dan Ros (Simon Ford, 19/03/2013)<br /> * Paul Osborn (Simon Ford, 27/03/2013)<br /> * David Esteves (Simon Ford, 27/03/2013)<br /> * Zé Pinto Ferreira (Simon Ford, 27/03/2013) <br /> * Sharath (Simon Ford, 27/03/2013)<br /> * Andy Jude (Simon Ford, 5/04/2013)<br /> * Mark Mellors (Simon Ford, 5/04/2013)<br /> * Chris Abri (Simon Ford, 5/04/2013)<br /> * Tom Ingham (Simon Ford, 5/04/2013)<br /> * Adrian van den Heever (David Barham, 11/04/2013)<br /> * Chris Voth (David Barham, 11/04/2013)<br /> * Archie Reid (David Barham, 11/04/2013)<br /> * Rachel Rayns (David Barham, 11/04/2013)<br /> * Giovanni Orlando (David Barham, 15/04/2013)<br /> * Chunhe Yu (Nicholas Johnson, 04/04/2013)<br /> * Marko Cosic (Nicholas Johnson, 04/04/2013)<br /> * Mark Watson (Nicholas Johnson, 04/04/2013)<br /> * Andy Fisher (Nicholas Johnson, 02/05/2013)<br /> * David Bebb (Nicholas Johnson, 02/05/2013)<br /> * Simon Haydn (Nicholas Johnson, 02/05/2013)<br /> * Adrian Carr (Nicholas Johnson, 02/05/2013)<br /> * John Clamp (Nicholas Johnson, 10/05/2013)<br /> * Maciek Piatek (Nicholas Johnson, 10/05/2013)<br /> * Antonio Barragan (Nicholas Johnson, 10/05/2013)<br /> * John Sturdy (Nicholas Johnson, 10/05/2013)<br /> * Roeland Schumacher (Nicholas Johnson, 10/05/2013)<br /> * Mark Tillotson (Nicholas Johnson, 10/05/2013)<br /> * Ward Hills (Nicholas Johnson, 10/05/2013)<br /> * Anne Harrison (Nicholas Johnson, 17/05/2013)<br /> * William Morton (Nicholas Johnson, 17/05/2013)<br /> * Ali (Nicholas Johnson, 17/05/2013)<br /> * Rod Williams (Nicholas Johnson, 17/05/2013)<br /> * Toby Moncaster (Simon Ford, 30/5/2013)<br /> * Damien Guihen (David Barham, 08/06/2013)<br /> * Ben Evan (David Barham, 08/06/2013)<br /> * Jake Young (David Barham, 08/06/2013)<br /> * Shareef Jalloq (David Barham, 08/06/2013)<br /> * Renee Chow (David Barham, 08/06/2013)<br /> * Dan Tidhar, (David Barham, 24/6/2013)<br /> * Mat Cook, (David Barham, 24/6/2013)<br /> * Toby Roberts (David Barham, 24/6/2013)<br /> * Jonathan Austin (David Barham, 24/6/2013)<br /> * Stacy Smith (David Barham, 13/8/2013)<br /> * Matt Harvey (David Barham, 13/8/2013)<br /> * Marcin (David Barham, 13/8/2013)<br /> * James Waldmeyer (David Barham, 18/9/2013)<br /> * Chris Wilson (David Barham, 18/9/2013)<br /> * Kevin Maloney (David Barham, 18/9/2013)<br /> * Harry Braviner (David Barham, 18/9/2013)<br /> * Lee (David Barham, 18/9/2013)<br /> * Jon Aas (Toby Moncaster, 24/9/2013)<br /> * Armando Carlone (Toby Moncaster, 24/9/2013)<br /> * Eckart Jack (Toby Moncaster, 24/9/2013)<br /> * Pop Sharma (Toby Moncaster, 24/9/2013)<br /> * Anthony Wainman (Toby Moncaster, 13/10/13)<br /> * Hazel Jenkins (Toby Moncaster, 13/10/13)<br /> * James Hutton (Toby Moncaster, 13/10/13)<br /> * Jia Wei Lim (Toby Moncaster, 13/10/13)<br /> * Julius Schmidt (Toby Moncaster, 13/10/13)<br /> * Riccardo Gherardi (Toby Moncaster, 23/10/13)<br /> * Anna Stoilova (Toby Moncaster, 23/10/13)<br /> * Glyn Knowles (Toby Moncaster, 23/10/13)<br /> * James Cooke (Toby Moncaster, 23/10/13)<br /> * Jennifer Herbert (Toby Moncaster, 23/10/13)<br /> * Simon Birrell (Toby Moncaster, 23/10/13)<br /> * Theo Sanderson (Toby Moncaster, 23/10/13)<br /> * Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)<br /> * John Campbell (Toby Moncaster, 30/10/13)<br /> * Stephen Jeapes (Toby Moncaster, 30/10/13)<br /> * Chris Stanley (Toby Moncaster, 30/10/13)<br /> * Mat Greenwood (Toby Moncaster, 30/10/13)<br /> * Jonathon Brookfield (Toby Moncaster, 30/10/13)<br /> * Matt Grimes (Toby Moncaster, 30/10/13)<br /> * Richard Fosh (Toby Moncaster, 30/10/13)<br /> * Esther Leighton (Toby Moncaster, 30/10/13)<br /> * Katia Dilks (Toby Moncaster, 21/11/13)<br /> * Tim Dilks (Toby Moncaster, 21/11/13)<br /> * Alexander MacFaden (Toby Moncaster, 21/11/13)<br /> * Brian Starkey (Toby Moncaster, 21/11/13)<br /> * Dave Potts (Martin de Selincourt, 4/12/13)<br /> * Andy Spencer (Martin de Selincourt, 4/12/13)<br /> * Jon Green (Martin de Selincourt, 4/12/13)<br /> * Danny Garden (Martin de Selincourt, 4/12/13)<br /> * Steve Wiseman (Martin de Selincourt, 4/12/13)<br /> * Patrick Wollner (David Barham, 18/2/14)<br /> * Leonardo Impett (David Barham, 18/2/14)<br /> * Diana Probst (Brian Starkey, 19/3/14)<br /> * Hidde-Jan Lemstra (Brian Starkey, 19/3/14)<br /> * Francisco Cordobes (Brian Starkey, 19/3/14)<br /> * Peter Ferguson (Mat Cook March 5 2014)<br /> * Tim Hayward (Mat Cook March 5 2014)<br /> * Jason White (Mat Cook March 5 2014)<br /> * Stuart Wilson (Mat Cook March 5 2014)<br /> * Steve Harrison (Mat Cook March 5 2014)<br /> * Alex Atkinson (Mat Cook March 12 2014)<br /> * Kate Aston (Mat Cook March 12 2014)<br /> * Sheila Shepherd (Mat Cook March 12 2014)<br /> * Rachel Bow (Mat Cook March 12 2014)<br /> * Emyr James (Mat Cook March 12 2014)<br /> * Peter Knight (Mat Cook March 12 2014)<br /> * Andy Gale (Mat Cook March 26 2014)<br /> * Owen McAree (Mat Cook March 26 2014)<br /> * Michal Stefenow (Mat Cook March 26 2014)<br /> * Neil Tan (Mat Cook March 26 2014)<br /> * Vaiva Kalmkaite? (Mat Cook Apr 23 2014)<br /> * Alberto Santos (Mat Cook Apr 23 2014)<br /> * Sonny Siree (sp?) (Mat Cook Apr 23 2014)<br /> * Tim Ronsell (Mat Cook Apr 23 2014)<br /> * Rob Voisey (Mat Cook Apr 23 2014)<br /> * Mike Hunter (Mat Cook Apr 23 2014)<br /> * Tony Bunting (Brian Starkey 30/4/14)<br /> * Eric Jones (Brian Starkey 30/4/14)<br /> * Carl Phillips (Brian Starkey 30/4/14)<br /> * Ed Ben (Brian Starkey 30/4/14)<br /> * Toby Norman (Brian Starkey 30/4/14)<br /> * Marco Galardini (Mat Cook May 7 2014)<br /> * Thomas Keller (Mat Cook May 7 2014)<br /> * Martin Lenz (Mat Cook 28 May 2014)<br /> * David Grech (Mat Cook 28 May 2014)<br /> * Rick Lupton (Mat Cook 28 May 2014)<br /> * Tim Regan (Mat Cook 28 May 2014)<br /> * Shashank Srinivasan (Mat Cook 28 May 2014)<br /> * Al Napp (Mat Cook 4 June 2014)<br /> * Tom Roberts (Mat Cook 4 June 2014)<br /> * Matthew Taylor (Mat Cook 4 June 2014)<br /> * Milosz Wasilewski (Mat Cook 4 June 2014)<br /> * Matt Grimes (Brian Starkey 11/06/14)<br /> * Brandon Invergo (Brian Starkey 11/06/14)<br /> * Simon West (Brian Starkey 11/06/14)<br /> * Kevin Rathbone (Brian Starkey 11/06/14)<br /> * Richard Gordon (Brian Starkey 11/06/14)<br /> * Rob Yates (Brian Starkey 12/07/14)<br /> * Alex Gee (Brian Starkey 12/07/14)<br /> * Patrick Beigent (Brian Starkey 12/07/14)<br /> * Guilliame Tucker (Brian Starkey 12/07/14)<br /> * Jo Brook (Brian Starkey 12/07/14)<br /> * David Taylor (Brian Starkey 12/07/14)<br /> * Joe Watson (Brian Starkey 23/07/14)<br /> * Richard Armstrong (Brian Starkey 23/07/14)<br /> * Eric Gowland (Brian Starkey 23/07/14)<br /> * Paul Holland (Brian Starkey 23/07/14)<br /> * Craig Richardson (Brian Starkey 23/07/14)<br /> * Stevan Wing (Mat Cook 11/08/2014)<br /> * John Sidiropoulos (Mat Cook 11/08/2014)<br /> * Greaham Douglas (Stevan Wing 17/09/2014)<br /> * Joseph Gamble (Stevan Wing 17/09/2014)<br /> * Robert Fryers (Stevan Wing 17/09/2014)<br /> * Will Hartley (Stevan Wing 17/09/2014)<br /> * Alistair Turnbull (Stevan Wing 24/09/2014)<br /> * Tim Ramsdale (Stevan Wing 24/09/2014)<br /> * Hugo Van Sansen (Stevan Wing 24/09/2014) <br /> * Marco Aita (David Barham 08/10/2014)<br /> * Rob Shore (David Barham 08/10/2014)<br /> * Katy Marshall (David Barham 08/10/2014)<br /> * John Clarke (David Barham 08/10/2014)<br /> * Danny Farrant (Stevan Wing 15/10/2014)<br /> * John Ginger (Stevan Wing 15/10/2014)<br /> * Emilo Mont (Stevan Wing 15/10/2014)<br /> * Geoff Lunn (Stevan Wing 15/10/2014)<br /> * Milosch Meriac (Stevan Wing 05/11/2014)<br /> * Abhi Manyu (Stevan Wing 05/11/2014)<br /> * Alba Rodriguez (Stevan Wing 05/11/2014)<br /> * Stephen Paulger (Stevan Wing 05/11/2014)<br /> * Erik Pickering (Stevan Wing 05/11/2014)<br /> * Rob Meadows (Stevan Wing 03/12/2014)<br /> * Chris Mayhurst (Stevan Wing 03/12/2014)<br /> * Giovanni Orlando (Stevan Wing 03/12/2014)<br /> * Chris Padbury (Stevan Wing 03/12/2014)<br /> * Robin Sterling (Stevan Wing 03/12/2014)<br /> * Kristien De Clercq (Stevan Wing 03/12/2014)<br /> * &quot;Nevindep&quot; (Mat Cook 11 Dec 2014)<br /> * Jae Turner (Mat Cook 11 Dec 2014)<br /> * Luke Twydell (Mat Cook 11 Dec 2014)<br /> * Steph Tyszka (Mat Cook 20 Dec 2014)<br /> * Jonny Waite (Brian Starkey 3/9/14)<br /> * Toby Jaffey (Brian Starkey 3/9/14)<br /> * Greg Matthews (Brian Starkey 3/9/14)<br /> * Tom Parker (Brian Starkey 12/11/14)<br /> * Ben Weeks (Brian Starkey 12/11/14)<br /> * Clara Todd (Brian Starkey 17/12/14)<br /> * Ian Mc (Brian Starkey 17/12/14)<br /> * Timothy Baldock (Brian Starkey 17/12/14)<br /> * Rob Rescrola (Brian Starkey 7/1/15)<br /> * Tariq Harris (Brian Starkey 7/1/15)<br /> * Ed Robertson (Brian Starkey 7/1/15)<br /> * Imogen Ford (Brian Starkey 7/1/15)<br /> * Dan Tidhar (Brian Starkey 7/1/15)<br /> * Tom Stroud (Brian Starkey 28/1/15)<br /> * Graeme ??? (Brian Starkey 28/1/15)<br /> * Henry Begg (Brian Starkey 28/1/15)<br /> * Phil McArthur (Brian Starkey 28/1/15)<br /> * Alex Judd (Martin de Selincourt 11/02/2015)<br /> * Adam Mulligan (Martin de Selincourt 11/02/2015)<br /> * Adam Nightingale (Martin de Selincourt 11/02/2015)<br /> * Charlotte Harvey (Martin de Selincourt 11/02/2015)<br /> * Matt Wayland (Martin de Selincourt 11/02/2015)<br /> * Andrei R. (Martin de Selincourt 11/02/2015)<br /> * John Mead (Martin de Selincourt 11/02/2015)<br /> <br /> = More trained users =<br /> <br /> Fully trained:<br /> * Hugo Keene (Mat Cook 31/03/2015)<br /> * Antony Congedo (Mat Cook 31/03/2015)<br /> * Alina Velea (Mat Cook 31/03/2015)<br /> * Nik Newark (Brian Starkey 22/4/15)<br /> * Claire Harriette (Brian Starkey 22/4/15)<br /> * Dittany Rose (Brian Starkey 22/4/15)<br /> * Martin Prescott (Brian Starkey 22/4/15)<br /> * Abi Bush (Brian Starkey 6/05/2015)<br /> * Arik Kershenbaum (Brian Starkey 6/05/2015)<br /> * Alexandra Grigore (Brian Starkey 6/05/2015)<br /> * Roy Gwinn (Brian Starkey 6/05/2015)<br /> * Josh Kaggie (Brian Starkey 6/05/2015)<br /> * Stoyan Smoukov (Brian Starkey 6/05/2015)<br /> * Adam Reig (Stevan Wing 27/05/2015)<br /> * Nicola Westgarth-Flynn (Stevan Wing 27/05/2015)<br /> * Dave Jordan (Stevan Wing 27/05/2015)<br /> * Khameinei Ali (Stevan Wing 27/05/2015)<br /> * Fotis Georgatos (Stevan Wing 27/05/2015)<br /> * Tianheng Zhao (Stevan Wing 27/05/2015)<br /> * Oliver Fleck (Rob Voisey 16/06/2015)<br /> * Johan Henriksson (Rob Voisey 16/06/2015)<br /> * Daryl Stewart (Rob Voisey 16/06/2015)<br /> * Frodi Jones (Rob Voisey 16/06/2015)<br /> * Andrew Mulholland (Rob Voisey 16/06/2015)<br /> * Tobias Wenzel (Brian Starkey 19/06/2015)<br /> * Alex Ridge (Brian Starkey 19/06/2015)<br /> * Louis Kovalevsky (Brian Starkey 19/06/2015)<br /> * Rich Hall (Brian Starkey 19/06/2015)<br /> * Ben Alper (Brian Starkey 19/06/2015)<br /> * Chandu Sekhar (Brian Starkey 19/06/2015)<br /> * Patrick ? (Rob Voisey 23/06/2015)<br /> * Andrew Cooke (Rob Voisey 23/06/2015)<br /> * Rosy Hunt (Rob Voisey 23/06/2015)<br /> * Tim Radvan (Rob Voisey 23/06/2015)<br /> * Benjamin Thomas Summers (Rob Voisey 23/06/2015)<br /> * Tom Hartley (Rob Voisey 02/07/2015)<br /> * Lucia Corsini (Rob Voisey 02/07/2015)<br /> * Clive Beale (Brian Starkey 29/07/2015)<br /> * Tumi Jones (Brian Starkey 29/07/2015)<br /> * Daniel Bailey (Brian Starkey 29/07/2015)<br /> * Tom Garton (Brian Starkey 29/07/2015)<br /> * Alice Milligan (Brian Starkey 29/07/2015)<br /> * Phill Banks (Brian Starkey 4/08/2015)<br /> * Ned Booker (Brian Starkey 4/08/2015)<br /> * Karan Gupta (Brian Starkey 4/08/2015)<br /> * Dave Frost (Brian Starkey 4/08/2015)<br /> * Fred Sorgeloos (Brian Starkey 4/08/2015)<br /> * Abigail Tyrrell (Rob Voisey 27/11/2015)<br /> * David Jordan (Rob Voisey 27/11/2015)<br /> * Robyn Kerrison (Rob Voisey 27/11/2015)<br /> * Andrea Cipri (Rob Voisey 27/11/2015)<br /> * Jakub Sanak (Rob Voisey 27/11/2015)<br /> <br /> = Yet more trained users =<br /> <br /> * Training 18 Nov 2015 (Mat Cook)<br /> ** Jack Brewster<br /> ** Mark Wainwright<br /> ** Kate Aston (again)<br /> ** Mayke Santos<br /> ** Barry Plows<br /> ** Victor Rybnok - no show, not trained, not a fully inducted member<br /> * Training 05 Dec 2015 (Mat Cook)<br /> ** Leo Rines (needs keyfob fully activating)<br /> ** Naomi Griffiths<br /> ** Jose Chitty<br /> ** David Haines<br /> ** Simon Hartley<br /> * Bogdan Spiridon (17/9/15 Brian Starkey)<br /> * Stewart Barton (17/9/15 Brian Starkey)<br /> * Jonathan Hughes (17/9/15 Brian Starkey)<br /> * Anija Dokter (17/9/15 Brian Starkey)<br /> * Paul Bond (17/9/15 Brian Starkey)<br /> * Thomas Richardson (6/1/16 Brian Starkey)<br /> * William Deeks (6/1/16 Brian Starkey)<br /> * Jonathan Woolf (6/1/16 Brian Starkey)<br /> * Mark Radford (6/1/16 Brian Starkey)<br /> * Tom Kelly (6/1/16 Brian Starkey)<br /> * Giovanni Bisutti (6/1/16 Brian Starkey)<br /> * Victor Rybynok (2/2/16 David Barham)<br /> * Olivier Martin (2/2/16 David Barham)<br /> * Craig Easton (23/03/16 Brian Starkey)<br /> * Daniel Zerbino (23/03/16 Brian Starkey)<br /> * Jeremy Minton (23/03/16 Brian Starkey)<br /> * Shunsuke Fujibayashi (23/03/16 Brian Starkey)<br /> * Charna Hume (23/03/16 Brian Starkey)<br /> * Jamie Powell (23/03/16 Brian Starkey)<br /> * Thomas Gillepie (5/4/16 Tom Parker)<br /> * Mark Barnard (5/4/16 Tom Parker)<br /> * Francois Eve (18/04/16 Brian Starkey)<br /> * David Hurron (18/04/16 Brian Starkey)<br /> * Paul Routly (18/04/16 Brian Starkey)<br /> * Thomas Wagner (18/04/16 Brian Starkey)<br /> * Steve Carey (18/04/16 Brian Starkey)<br /> * Sophie Weeks (18/04/16 Brian Starkey)<br /> * Dan Evans (3/05/16 Tom Parker)<br /> * Thomas Grant (3/05/16 Tom Parker)<br /> * Thomas Arrow (3/05/16 Tom Parker)<br /> * David Marcus (3/05/16 Tom Parker)<br /> * Joe Halstead (3/05/16 Tom Parker)<br /> * Steve Murphy (3/05/16 Tom Parker)<br /> * Martin Hollis (3/05/16 Tom Parker)<br /> * Miguel Morin (21/06/16 Brian Starkey)<br /> * Cadu Miceli (21/06/16 Brian Starkey)<br /> * Joe Studwell (21/06/16 Brian Starkey)<br /> * Adrien Leger (21/06/16 Brian Starkey)<br /> * Mik Lamming (13/07/16 Brian Starkey)<br /> * Thomas Sanders (13/07/16 Brian Starkey)<br /> * Natalie Ward (13/07/16 Brian Starkey)<br /> * Ben Hurren (13/07/16 Brian Starkey)<br /> * Hsin-ling Liang (10/08/16 Brian Starkey)<br /> * Cat Fitzpatrick (10/08/16 Brian Starkey)<br /> * Michael Schmid (10/08/16 Brian Starkey)<br /> * Nadia Bassiri (10/08/16 Brian Starkey)<br /> * Htoo Wai Htet (10/08/16 Brian Starkey)<br /> * Spencer Wilson (10/08/16 Brian Starkey)<br /> * Mihai Truta (4/10/16 David Barham)<br /> * Simon Guest (4/10/16 David Barham)<br /> * Will Nock (4/10/16 David Barham)<br /> * Dan Tidhar (4/10/16 David Barham)<br /> * Ziyi Yu (4/10/16 David Barham)<br /> * David Crawford (4/10/16 David Barham)<br /> * Rick Amos (20/10/16 Steve Murphy)<br /> * Joe Eadon (20/10/16 Steve Murphy)<br /> * Ziyi Yu (20/10/16 Steve Murphy)<br /> * Brendan Cawley (20/10/16 Steve Murphy)<br /> * Joachim De Jonghe (20/10/16 Steve Murphy)<br /> * Arthur Queval (27/10/16 Steve Murphy)<br /> * Andy Saul (27/10/16 Steve Murphy)<br /> * Thomas Meany (27/10/16 Steve Murphy)<br /> * Ronny Schluetter (27/10/16 Steve Murphy)<br /> * Ben Brebner (27/10/16 Steve Murphy)<br /> * Scott Cunliffe (4/1/2017 Miguel Morin)<br /> * Tian Huang (4/1/2017 Miguel Morin)<br /> * Steven Burgess (4/1/2017 Miguel Morin)<br /> * James Potter (15/1/2017 Miguel Morin)<br /> * Ross Rounsevell (15/1/2017 Miguel Morin)<br /> * Abigail Wills (15/1/2017 Miguel Morin)<br /> * Lynne Horton (15/1/2017 Miguel Morin)<br /> * Andrew Velle (15/1/2017 Miguel Morin)<br /> * Thomas Kopsch (15/1/2017 Miguel Morin)<br /> * Dario Bressan (12/2/2017 Miguel Morin)<br /> * Lisa Smith (12/2/2017 Miguel Morin)<br /> * Luke Heavens (12/2/2017 Miguel Morin)<br /> * Lucy Copping (12/2/2017 Miguel Morin)<br /> * Tobias Herold (02/03/2017 Tom Parker)<br /> * Chloe Thomas (02/03/2017 Tom Parker)<br /> * Hugh Craft (02/03/2017 Tom Parker)<br /> * Angela Birlea (02/03/2017 Tom Parker)<br /> * Gemma Goodfellow (28/03/2017 David Barham)<br /> * Mark Williamson (28/03/2017 David Barham)<br /> * Steven Penney (28/03/2017 David Barham)<br /> * Simon Marache-Francisco (28/03/2017 David Barham)<br /> * Tommaso Leonardi (15/04/2017 Miguel Morin)<br /> * Rasko Leinonen (15/04/2017 Miguel Morin)<br /> * Arnet Addis (15/04/2017 Miguel Morin)<br /> * James O'Sul­livan (15/04/2017 Miguel Morin)<br /> * Training 6 May 2017 (Miguel Morin)<br /> ** Carlos Araque<br /> ** Ian Guebert<br /> ** Richard Dwan<br /> * Peter Murray-Rus­t (7/6/17 Tom Parker)<br /> * Hardie Pienaar (7/6/17 Tom Parker)<br /> * Rob Sandford (7/6/17 Tom Parker)<br /> * Despina Davoudani (7/6/17 Tom Parker)<br /> * Training 22 July 2017 (Miguel Morin)<br /> ** Richard Blakesley<br /> ** Doroteja Maklin<br /> ** Daniel Attila Tovisi<br /> ** Alex Johannsson<br /> * Trained 15 August 2017 (David Barham)<br /> ** Andy Clark<br /> ** Jenni Main<br /> ** Angus Main<br /> ** Richard Seymour<br /> ** Becky Warren<br /> ** Sean Sleator<br /> ** Lucy Shipp<br /> * Trained 13 Sept 2017 (Katy Marshall / David Barham)<br /> ** David Rodriguez<br /> ** Matthew Timmons-Brown<br /> ** Joanna Brunker<br /> ** Marcel Gehrung<br /> * Trained 19 Sept 2017 (Katy Marshall)<br /> ** Chammi Udalamatta<br /> * Trained 02 October 2017 (Katy Marshall)<br /> ** Robert Lamont<br /> ** Melanie T<br /> ** Tom Le Cheminont<br /> ** Tunde Szentes<br /> <br /> = Training Cheatsheet =<br /> <br /> The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.<br /> <br /> == Group Training ==<br /> <br /> The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.<br /> <br /> Introduction of main components<br /> * Laser<br /> * Cutting Mechanics<br /> * Water Cooler System<br /> * Filter<br /> * PC<br /> * Materials (what it can cut, supply)<br /> <br /> Checks for everyone to do<br /> * Check in use, looks ok<br /> * Check water bath, temperature<br /> <br /> Powering Up<br /> * Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)<br /> * Turning on Laser and warmup, what to do if doesn't power up<br /> * Turning on PC and starting software<br /> <br /> LaserCut Project walkthrough (using M+S+text keyring example)<br /> * Package function, drawing, import file types<br /> * Bed dimensions<br /> * Paths, yellow dots, 'united' shapes<br /> * Blue dot, Immediate mode<br /> * Layers and colours<br /> * Through cut, surface cut and engraving, speeds and strengths<br /> * Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)<br /> * Job ordering <br /> * Saving<br /> * Download as immediate, delete, download current<br /> <br /> Laser Operation<br /> * Lid<br /> * Control panel, escape<br /> * Moving head XY, indicator laser, datum<br /> * Moving Z<br /> * Focus<br /> * Start position and test<br /> * Start, pause and emergency stop function<br /> * Do job, pause/open lid, restart<br /> <br /> Laser Hazards<br /> * Process and progression for normal operation failure (fire) - pause, open, move, CO2 <br /> * Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2<br /> * Ensure confident of process<br /> <br /> Power Down<br /> * Switch off laser<br /> * Switch off filtration<br /> * Clean any residue from the bed or bottom tray<br /> * Close lid<br /> <br /> == Individual Training Task ==<br /> <br /> The individual task to get familiar, prompt questions and check understanding:<br /> <br /> Task<br /> * Make a personalised focus tool<br /> * Square acrylic of appropriate size<br /> * Member's name, &quot;Focus Tool&quot;, keychain hole<br /> * Should use full cut, surface cut, engrave<br /> * Should demonstrate all steps, size, appropriate ordering, positioning<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to lasering (watch carefully all steps)<br /> * Ask to stop job/restart, question escalation process<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Add to the trained member list!<br /> <br /> == Project Oversight ==<br /> <br /> For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/3D_Printer/UM2Training 2017-09-25T20:36:42Z

<p>Kitkatmarshall: /* Trained Users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/3D Printer|UM2]] / Training<br /> <br /> = Ultimaker 2 3D Printer Training =<br /> <br /> This page documents the process for being trained on the Ultimaker 2 Printer, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~20min each)<br /> * Recommended project oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)<br /> <br /> A shorter conversion training session is available for members who were previously signed off to use the Makerbot 2X printer. These sessions last around 20 minutes and do not include individual sessions.<br /> <br /> == Booking ==<br /> <br /> For discussing and arranging slots, please use the mailing list. New training sessions will be announced on the Meetup group.<br /> <br /> Notes:<br /> * You can only be trained if you have RSVP'd to a Meetup session<br /> <br /> == Training Cheatsheet - Conversion Course ==<br /> <br /> Members already trained on and familiar with the Makerbot 2X can attend this short conversion course to be signed off to use the Ultimaker 2 3D printer. Up to 10 people can be accommodated on each course, which lasts 20 to 30 minutes.<br /> <br /> 1. Physical Differences from the 2X<br /> * Glass build plate, no kapton tape<br /> * Single extruder<br /> * Push feed<br /> <br /> 2. General<br /> * Use the correct filament (2.85mm, NOT 3mm or 1.75mm)<br /> * New filament storage system<br /> <br /> 3. Printing<br /> * Fence / Brim / Raft<br /> * OK to leave printer unattended after the first few layers<br /> * Camera available for remote monitoring<br /> * Use only plastic implements for part removal, take care not to melt them on the hot end<br /> <br /> 4. Cura Software<br /> * Import and place<br /> * Simple mode<br /> * Brief overview of advanced mode<br /> * Temperature set on printer not slicer<br /> * Exporting to SD card<br /> <br /> 5. Unload / Load filament<br /> * How to feed (slow first, then fast)<br /> * Select correct material in menu<br /> * Changing temperature and speed parameters from printer<br /> * Demonstrate the atomic method of cleaning the extruder to prevent feed jams<br /> <br /> 6. Filament pricing<br /> * 5p per gram for PLA and ABS, to be kept under review<br /> * Include wastage!<br /> <br /> == Training Cheatsheet - Full Course ==<br /> <br /> '''Group Session'''<br /> <br /> 1. Ask what each member hopes to get out of the 3D printer.<br /> <br /> 2. Explain how 3D printing works<br /> <br /> 3. Safety<br /> * Burn hazard – nozzle and build plate<br /> * Unit may move unexpectedly<br /> * Avoid prolonged exposure to ABS fumes<br /> <br /> 4. Damage to machine<br /> * Fragile build plate<br /> * Jammed filament<br /> <br /> 5. General<br /> * Use the correct filament (2.85mm)<br /> * Filament storage and feed system<br /> * Switch off when finished<br /> * Leave levelling to the owners but report any problems<br /> <br /> 6. PLA vs ABS<br /> * How to tell the difference<br /> * Different temperature<br /> * PLA Biodegradable<br /> * See the Wiki for tips on printing with ABS and cleaning after<br /> <br /> 7. Software / workflow<br /> * Importing<br /> * Positioning on bed<br /> * Supports<br /> * Setting quality / speed trade off<br /> * Advanced options<br /> * Exporting to SD card<br /> * Wiki for tips on Cura<br /> <br /> 8. Unload / load<br /> * Check filament for damadge, cut filament at an angle (see Wiki for problems when loading)<br /> * Attaching spool. Ensure correct direction and not tangled<br /> * Feeding (slow then fast)<br /> * Beware of wrapping round axle<br /> * Setting material in menu<br /> * Adjusting parameters, e.g. ABS plate temperature<br /> <br /> 9. Printing<br /> * Preheating<br /> * Fence printing<br /> * Keep an eye on progress, locally or with camera<br /> * If leaving unattended, put a post-it (or badger) with your contact details<br /> * Use only plastic implements for part removal<br /> <br /> 10. Other stuff<br /> * Demonstrate atomic method of cleaning the nozzle to prevent feed jams<br /> * Strength characteristics – orientation is important<br /> * '''Paying'''<br /> <br /> '''Individual Training Task'''<br /> <br /> Task<br /> * Should demonstrate import, setup, position and run<br /> * Choose a part that takes about 10 mins to print (preloaded on PC)<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to printing (watch carefully all steps)<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Highlight the wiki for more information and owners email address on poster<br /> * Add to the trained member list<br /> <br /> '''Project Oversight'''<br /> <br /> For next 2-3 projects, recommend member will find another more experienced trained user to support them (second pair of eyes)<br /> <br /> '''Record Training On Wiki'''<br /> <br /> <br /> == Please write your name clearly below ==<br /> <br /> * The trainer will add you to the Trained Users page on the Wiki but can't do that if they are unable to read your name.<br /> * Please remember to check the Wiki for tips and updates on using the Ultimaker.<br /> <br /> Date of training:<br /> <br /> == Trained Users ==<br /> <br /> The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):<br /> <br /> * Paul Osborn (Rob Voisey, 2015-07-30)<br /> * Julius Schmidt (Rob Voisey, 2015-07-30)<br /> * Peter Knight (Rob Voisey, 2015-07-30)<br /> * Adam Mulligan (Rob Voisey, 2015-07-30)<br /> * Charlotte Harvey (Rob Voisey, 2015-07-30)<br /> * Alex Gee (Rob Voisey, 2015-07-30)<br /> * Albert Santos (Rob Voisey, 2015-07-30)<br /> * Zizwani Mhango (Rob Voisey, 2015-07-30)<br /> * Christie Nel (Rob Voisey, 2015-07-30)<br /> * Robert Karpinski (Rob Voisey, 2015-07-30)<br /> * Alexis Mather (Stephen Harrison, 2015-08-03)<br /> * Ben Wheatley (Stephen Harrison, 2015-08-03)<br /> * Stevan Wing (Stephen Harrison, 2015-08-03)<br /> * Jae Tumer (Stephen Harrison, 2015-08-03)<br /> * Jennifer Herbert (Stephen Harrison, 2015-08-03)<br /> * Frodi Jones (Stephen Harrison, 2015-08-03)<br /> * Matt Wayland (Stephen Harrison, 2015-08-03)<br /> * Marco Aite (Stephen Harrison, 2015-08-03)<br /> * Graeham Douglas (Stephen Harrison, 2015-08-03)<br /> * Robin Sterling (Stephen Harrison, 2015-08-07)<br /> * Abhi Manyu (Stephen Harrison, 2015-08-07)<br /> * Ward Hills (Stephen Harrison, 2015-08-07)<br /> * Carols A. Lugo (Stephen Harrison, 2015-08-07)<br /> * Ben Alper (Stephen Harrison, 2015-08-07)<br /> * Jon Green (Stephen Harrison, 2015-08-07)<br /> * Marcin Izo (Stephen Harrison, 2015-08-07)<br /> * Steve Upton (Rob Voisey, 2015-08-11)<br /> * Frederic Sorgeloos (Rob Voisey, 2015-08-11)<br /> * Andrew Cooke (Rob Voisey, 2015-08-11)<br /> * Ned Booker (Rob Voisey, 2015-08-11)<br /> * Daryl Stewart (Paul Edgington, 2015-08-24)<br /> * Nacho Lopez (Paul Edgington, 2015-08-24)<br /> * Ed Robertson (Paul Edgington, 2015-08-24)<br /> * Clive Beale (Paul Edgington, 2015-08-24)<br /> * Oliver Fleck (Paul Edgington, 2015-08-24)<br /> * Mark Cheverton (Rob Voisey, 2015-09-08)<br /> * Nik (Rob Voisey, 2015-09-08)<br /> * Dan Tidhar (Rob Voisey, 2015-09-08)<br /> * Tobias Wenzel (Rob Voisey, 2015-09-08)<br /> * Brian Starkey (Rob Voisey, 2015-09-08)<br /> * Jonathan Waite (Rob Voisey, 2015-09-08)<br /> * Emyr James (Rob Voisey, 2015-09-08)<br /> * Richard Hall (Rob Voisey, 2015-09-08)<br /> * Andrew Dunn (Rob Voisey, 2015-09-08)<br /> * Andrea Cipri (Paul Edgington, 2015-09-30)<br /> * John Sidinopoulos (Paul Edgington, 2015-09-30)<br /> * Stuart Barton (Paul Edgington, 2015-09-30)<br /> * Mark Calleta (Paul Edgington, 2015-09-30)<br /> * Martin Lenz (Paul Edgington, 2015-09-30)<br /> * Phill Banks (Paul Edgington, 2015-10-21)<br /> * Felix Morley (Paul Edgington, 2015-10-21)<br /> * David Jordan (Paul Edgington, 2015-10-21)<br /> * Mark Roberts (Stephen Harrison, 2015-10-23)<br /> * Jenny Molloy (Stephen Harrison, 2015-10-23)<br /> * Henry Cawley (Rob Voisey, 2015-11-18)<br /> * Bogdan Spiridom (Rob Voisey, 2015-11-18)<br /> * Jakub Sanak (Rob Voisey, 2015-11-18)<br /> * Jack Brewster (Rob Voisey, 2015-11-18)<br /> * Mayke Santos (Rob Voisey, 2015-11-18)<br /> * Luis Veiga Pumar (Stephen Harrison, 2015-11-24)<br /> * Greg Matthews (Stephen Harrison, 2015-11-24)<br /> * Brian Corteil (Stephen Harrison, 2015-11-24)<br /> * Rob Rescorla (Stephen Harrison, 2015-11-24)<br /> * Leo Rones (Stephen Harrison, 2015-11-24)<br /> * Diana Probst (Stephen Harrison, 2015-11-25)<br /> * Adrian van den Heever (Stephen Harrison, 2015-11-25)<br /> * Al Napp (Stephen Harrison, 2015-11-25)<br /> * Katy Marshall (Stephen Harrison, 2015-12-01)<br /> * Peter Mottram (Stephen Harrison, 2015-12-01)<br /> * David Barham (Stephen Harrison, 2015-12-01)<br /> * Johan Henriksson­ (Stephen Harrison, 2015-12-01)<br /> * Fotis Fotiadis (Stephen Harrison, 2015-12-01)<br /> * Oliver Martin (Stephen Harrison, 2015-12-01)<br /> * Andrew Drummond (Stephen Harrison, 2015-12-01)<br /> * Spencer Dixon (Stephen Harrison, 2015-12-01)<br /> * Jonathan Woolf (Rob Voisey, 2016-01-07)<br /> * Daniel Bailey (Rob Voisey, 2016-01-07)<br /> * David Haines (Rob Voisey, 2016-01-07)<br /> * Giovanni Bisutii (Rob Voisey, 2016-01-07)<br /> * Simon Hartley (Daniel Bailey, 2016-02-11)<br /> * Francois Eve (Daniel Bailey, 2016-02-11)<br /> * Giovanni Orlando (Daniel Bailey, 2016-02-11)<br /> * Dan Tidhar (Daniel Bailey, 2016-02-11)<br /> * Shunsuke Fujibayash­i (Daniel Bailey, 2016-03-04)<br /> * Ronny Schlutter (Daniel Bailey, 2016-03-04)<br /> * Jamie Powell (Daniel Bailey, 2016-03-04)<br /> * Mark Wainwright (Daniel Bailey, 2016-03-04)<br /> * Charna Hume (Daniel Bailey, 2016-03-04)<br /> * Charlotte Godley (Daniel Bailey, 2016-03-04)<br /> * Jose Chitty (Stephen Harrison, 2016-03-22)<br /> * Mat Greenwood (Stephen Harrison, 2016-03-22)<br /> * David Fisher (Stephen Harrison, 2016-03-22)<br /> * Tom Kelly (Stephen Harrison, 2016-03-22)<br /> * David Bebb (Stephen Harrison, 2016-04-12)<br /> * David Taylor (Stephen Harrison, 2016-04-12)<br /> * Jo Brook (Stephen Harrison, 2016-04-12)<br /> * Craig Easton (Daniel Bailey, 2016-04-20)<br /> * James Griffiths (Daniel Bailey, 2016-04-20)<br /> * Paul Routley (Daniel Bailey, 2016-04-20)<br /> * Steve Murphy (Daniel Bailey, 2016-04-20)<br /> * Cong Cong Bo (Daniel Bailey, 2016-06-24)<br /> * Adrien Leger (Daniel Bailey, 2016-06-24)<br /> * David Marcus (Daniel Bailey, 2016-06-24)<br /> * Mik Lamming (Stephen Harrison, 2016-07-06)<br /> * Rob MacAulay (Stephen Harrison, 2016-07-06)<br /> * Daniel Farrant (Stephen Harrison, 2016-07-06)<br /> * Steve Carey (Stephen Harrison, 2016-07-06)<br /> * Debora Rodriguez (Daniel Bailey, 2016-07-30)<br /> * David Horsnell (Daniel Bailey, 2016-07-30)<br /> * Cat Fitzpatrick (Daniel Bailey, 2016-08-12)<br /> * Hsingling Lian (Daniel Bailey, 2016-08-12)<br /> * Jeremy Bentham (Daniel Bailey, 2016-08-12)<br /> * Nadia Bassiri (Daniel Bailey, 2016-08-12)<br /> * Thomas Wanger (Daniel Bailey, 2016-08-12)<br /> * Migual Morin (Stephen Harrison, 2016-09-23)<br /> * Eric Jones (Stephen Harrison, 2016-09-23)<br /> * Will Nock (Stephen Harrison, 2016-09-23)<br /> * Mihai Truta (Stephen Harrison, 2016-09-23)<br /> * Grawham Douglas (Stephen Harrison, 2016-09-23)<br /> * Hedley Simons (Stephen Harrison, 2016-10-20)<br /> * Ravan Keerthi (Stephen Harrison, 2016-10-20)<br /> * Richard Hosking (Stephen Harrison, 2016-11-14)<br /> * Zuke Heavens (Stephen Harrison, 2016-11-14)<br /> * Volker Eckert (Stephen Harrison, 2016-11-14)<br /> * Tian Huang (Stephen Harrison, 2016-11-14)<br /> * Craig Richardson (Stephen Harrison, 2016-11-14)<br /> * Charlie Stokes (Stephen Harrison, 2016-11-23)<br /> * Ben Brebner (Stephen Harrison, 2016-11-23)<br /> * Thomas Kopsch (Stephen Harrison, 2016-11-23)<br /> * Mateusz Kosturek (Stephen Harrison, 2016-11-23)<br /> * Alex Bate (Stephen Harrison, 2016-11-30)<br /> * Martha Levine (Stephen Harrison, 2016-11-30)<br /> * John Perdue (Stephen Harrison, 2016-11-30)<br /> * Carlos Pereira Atencio (Stephen Harrison, 2016-11-30)<br /> * Francisco Pelligar (Stephen Harrison, 2016-12-05)<br /> * Rick Smith (Stephen Harrison, 2016-12-05)<br /> * Mark Chapman (Stephen Harrison, 2016-12-05)<br /> * Peter Spencer (Stephen Harrison, 2016-12-05)<br /> * Josh Kaggie (Stephen Harrison, 2016-12-11)<br /> * Ian Spolton (Stephen Harrison, 2016-12-11)<br /> * Angela Birlea (Stephen Harrison, 2017-02-09)<br /> * Scott Cunliffe (Stephen Harrison, 2017-02-09)<br /> * Boyuan Xiao (Stephen Harrison, 2017-02-09)<br /> * Peter Molnar (Stephen Harrison, 2017-02-20)<br /> * Andy Clark (Stephen Harrison, 2017-02-09)<br /> * Nikolay Pchelintsev (Stephen Harrison, 2017-02-09)<br /> * Tim Rowsful (Stephen Harrison, 2017-03-02)<br /> * Joe Escott (Stephen Harrison, 2017-03-02)<br /> * Dean Kos (Stephen Harrison, 2017-03-02)<br /> * Despina Devoudani (Stephen Harrison, 2017-03-21)<br /> * John Doherty (Stephen Harrison, 2017-03-21)<br /> * Peter Murray-Rust (Stephen Harrison, 2017-03-21)<br /> * Tom Oinn (Stephen Harrison, 2017-03-21)<br /> * Rob Sandford (Will Nock, 2017-03-27)<br /> * Gemma Goodfellow (Will Nock, 2017-03-27)<br /> * Tommaso Leonardi (Will Nock, 2017-03-27)<br /> * Carlos Araque (Will Nock, 2017-03-27)<br /> * James Potter (Stephen Harrison, 2017-05-10)<br /> * Ian Guebert (Stephen Harrison, 2017-05-10)<br /> * Xorge Castro (Stephen Harrison, 2017-05-10)<br /> * George Agnew (Stephen Harrison, 2017-05-10)<br /> * Tom Feather (Stephen Harrison, 2017-05-10)<br /> * Simon Marache-Francisco (Will Nock, 2017-05-17)<br /> * Hardie Pienaar (Will Nock, 2017-05-17)<br /> * Moti Tabulo (Will Nock, 2017-05-17)<br /> * Andy Fisher (Will Nock, 2017-05-17)<br /> * Marie Besnier (Katy Marshall,2017-06-06)<br /> * Graskc Van Leeuwei (Katy Marshall,2017-06-06)<br /> * Lin Zheng (Katy Marshall,2017-06-06)<br /> * Jose Diez (Stephen Harrison, 2017-07-14)<br /> * Richard Green (Stephen Harrison, 2017-07-14)<br /> * Doroteja Maklin (Stephen Harrison, 2017-07-14)<br /> * Daniel Tovisi (Stephen Harrison, 2017-07-14)<br /> * Andrzej Kaczorowski (Stephen Harrison, 2017-07-14)<br /> * Laura James (Katy Marshall, 2017-07-20)<br /> * Michael Dales (Katy Marshall, 2017-07-20)<br /> * Sammy Mahdi (Katy Marshall, 2017-07-20)<br /> * Angus Main (Katy Marshall, 2017-07-20)<br /> * Jenni Main (Katy Marshall, 2017-07-24)<br /> * Sean Sleator (Katy Marshall, 2017-07-24)<br /> * Chammi Udalamatta (Katy Marshall, 2017-07-24)<br /> * Robert Lamont (Boyuan Xiao, 2017-07-26)<br /> * Alan Scott (Boyuan Xiao, 2017-07-26)<br /> * Juan Reyero (Boyuan Xiao, 2017-07-26)<br /> * Ross Henry (Boyuan Xiao, 2017-08-17)<br /> * Tom De C (Katy Marshall, 2017-09-25)<br /> * Joe Studwell (Katy Marshall, 2017-09-25)<br /> * Melanie T (Katy Marshall, 2017-09-25)<br /> * E.R. Canales-Canales (Katy Marshall, 2017-09-25)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/Laser_Cutter/Training 2017-09-24T14:14:47Z

<p>Kitkatmarshall: /* Yet more trained users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training<br /> <br /> = Laser Cutter Training =<br /> <br /> This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)<br /> <br /> Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.<br /> <br /> == Booking ==<br /> <br /> Sessions are advertised on '''http://meetup.makespace.org'''<br /> * For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]<br /> <br /> Notes:<br /> * You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)<br /> * You must do the group and individual training on the same day<br /> <br /> = Trained Users =<br /> <br /> The following members of Makespace are owner/trainers of the laser cutter:<br /> * Simon Ford<br /> * David Barham<br /> * Nick Johnson<br /> * Toby Moncaster<br /> * Martin de Selincourt<br /> * Mat Cook<br /> * [[User:stevancw|Stevan Wing]]<br /> <br /> The following members of Makespace are trainers on the laser cutter:<br /> * Brian Starkey<br /> * [[User:robv|Rob Voisey]]<br /> * Tom Parker<br /> * Steve Murphy<br /> * Katy Marshall<br /> <br /> The following members of Makespace are owners on the laser cutter:<br /> * Diana Probst<br /> <br /> <br /> The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):<br /> * Steve Upton (Simon Ford, 23/01/2013)<br /> * Martin de Selincourt (Simon Ford, 23/01/2013)<br /> * Oliver Jackson (Simon Ford, 23/01/2013)<br /> * Simon Stirley (Simon Ford, 01/02/2013)<br /> * Stephen Woolhead (Simon Ford, 01/02/2013)<br /> * Martin Levine (Simon Ford, 01/02/2013)<br /> * Uwe Borowski (Simon Ford, 01/02/2013)<br /> * Peter Sewell (Simon Ford, 03/02/2013)<br /> * Steve Loughran (Simon Ford, 03/02/2013)<br /> * ST John (Simon Ford, 03/02/2013)<br /> * Henry Gomersall (Simon Ford, 03/02/2013)<br /> * Brian Corteil (Simon Ford, 05/02/2013)<br /> * Wayne Keenan (Simon Ford, 05/02/2013)<br /> * Andrew Dunn (Simon Ford, 05/02/2013)<br /> * David Knell (Simon Ford, 05/02/2013)<br /> * Tom Oinn (David Barham, 12/02/2013)<br /> * Amir Chaudhry (David Barham, 12/02/2013)<br /> * Anil Madhavapeddy (David Barham, 12/02/2013)<br /> * Edward Imhagwe (David Barham, 12/02/2013)<br /> * Michael Dales (Simon Ford, 2/03/2013)<br /> * Laura James (Simon Ford, 2/03/2013)<br /> * Robert Copcutt (Simon Ford, 2/03/2013)<br /> * Phil Cowans (Simon Ford, 2/03/2013)<br /> * Errol McMullen (Simon Ford, 9/03/2013)<br /> * Gaye Soykok (Simon Ford, 19/03/2013)<br /> * Mark Williamson (Simon Ford, 19/03/2013) <br /> * Joe Tapply (Simon Ford, 19/03/2013)<br /> * Dan Ros (Simon Ford, 19/03/2013)<br /> * Paul Osborn (Simon Ford, 27/03/2013)<br /> * David Esteves (Simon Ford, 27/03/2013)<br /> * Zé Pinto Ferreira (Simon Ford, 27/03/2013) <br /> * Sharath (Simon Ford, 27/03/2013)<br /> * Andy Jude (Simon Ford, 5/04/2013)<br /> * Mark Mellors (Simon Ford, 5/04/2013)<br /> * Chris Abri (Simon Ford, 5/04/2013)<br /> * Tom Ingham (Simon Ford, 5/04/2013)<br /> * Adrian van den Heever (David Barham, 11/04/2013)<br /> * Chris Voth (David Barham, 11/04/2013)<br /> * Archie Reid (David Barham, 11/04/2013)<br /> * Rachel Rayns (David Barham, 11/04/2013)<br /> * Giovanni Orlando (David Barham, 15/04/2013)<br /> * Chunhe Yu (Nicholas Johnson, 04/04/2013)<br /> * Marko Cosic (Nicholas Johnson, 04/04/2013)<br /> * Mark Watson (Nicholas Johnson, 04/04/2013)<br /> * Andy Fisher (Nicholas Johnson, 02/05/2013)<br /> * David Bebb (Nicholas Johnson, 02/05/2013)<br /> * Simon Haydn (Nicholas Johnson, 02/05/2013)<br /> * Adrian Carr (Nicholas Johnson, 02/05/2013)<br /> * John Clamp (Nicholas Johnson, 10/05/2013)<br /> * Maciek Piatek (Nicholas Johnson, 10/05/2013)<br /> * Antonio Barragan (Nicholas Johnson, 10/05/2013)<br /> * John Sturdy (Nicholas Johnson, 10/05/2013)<br /> * Roeland Schumacher (Nicholas Johnson, 10/05/2013)<br /> * Mark Tillotson (Nicholas Johnson, 10/05/2013)<br /> * Ward Hills (Nicholas Johnson, 10/05/2013)<br /> * Anne Harrison (Nicholas Johnson, 17/05/2013)<br /> * William Morton (Nicholas Johnson, 17/05/2013)<br /> * Ali (Nicholas Johnson, 17/05/2013)<br /> * Rod Williams (Nicholas Johnson, 17/05/2013)<br /> * Toby Moncaster (Simon Ford, 30/5/2013)<br /> * Damien Guihen (David Barham, 08/06/2013)<br /> * Ben Evan (David Barham, 08/06/2013)<br /> * Jake Young (David Barham, 08/06/2013)<br /> * Shareef Jalloq (David Barham, 08/06/2013)<br /> * Renee Chow (David Barham, 08/06/2013)<br /> * Dan Tidhar, (David Barham, 24/6/2013)<br /> * Mat Cook, (David Barham, 24/6/2013)<br /> * Toby Roberts (David Barham, 24/6/2013)<br /> * Jonathan Austin (David Barham, 24/6/2013)<br /> * Stacy Smith (David Barham, 13/8/2013)<br /> * Matt Harvey (David Barham, 13/8/2013)<br /> * Marcin (David Barham, 13/8/2013)<br /> * James Waldmeyer (David Barham, 18/9/2013)<br /> * Chris Wilson (David Barham, 18/9/2013)<br /> * Kevin Maloney (David Barham, 18/9/2013)<br /> * Harry Braviner (David Barham, 18/9/2013)<br /> * Lee (David Barham, 18/9/2013)<br /> * Jon Aas (Toby Moncaster, 24/9/2013)<br /> * Armando Carlone (Toby Moncaster, 24/9/2013)<br /> * Eckart Jack (Toby Moncaster, 24/9/2013)<br /> * Pop Sharma (Toby Moncaster, 24/9/2013)<br /> * Anthony Wainman (Toby Moncaster, 13/10/13)<br /> * Hazel Jenkins (Toby Moncaster, 13/10/13)<br /> * James Hutton (Toby Moncaster, 13/10/13)<br /> * Jia Wei Lim (Toby Moncaster, 13/10/13)<br /> * Julius Schmidt (Toby Moncaster, 13/10/13)<br /> * Riccardo Gherardi (Toby Moncaster, 23/10/13)<br /> * Anna Stoilova (Toby Moncaster, 23/10/13)<br /> * Glyn Knowles (Toby Moncaster, 23/10/13)<br /> * James Cooke (Toby Moncaster, 23/10/13)<br /> * Jennifer Herbert (Toby Moncaster, 23/10/13)<br /> * Simon Birrell (Toby Moncaster, 23/10/13)<br /> * Theo Sanderson (Toby Moncaster, 23/10/13)<br /> * Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)<br /> * John Campbell (Toby Moncaster, 30/10/13)<br /> * Stephen Jeapes (Toby Moncaster, 30/10/13)<br /> * Chris Stanley (Toby Moncaster, 30/10/13)<br /> * Mat Greenwood (Toby Moncaster, 30/10/13)<br /> * Jonathon Brookfield (Toby Moncaster, 30/10/13)<br /> * Matt Grimes (Toby Moncaster, 30/10/13)<br /> * Richard Fosh (Toby Moncaster, 30/10/13)<br /> * Esther Leighton (Toby Moncaster, 30/10/13)<br /> * Katia Dilks (Toby Moncaster, 21/11/13)<br /> * Tim Dilks (Toby Moncaster, 21/11/13)<br /> * Alexander MacFaden (Toby Moncaster, 21/11/13)<br /> * Brian Starkey (Toby Moncaster, 21/11/13)<br /> * Dave Potts (Martin de Selincourt, 4/12/13)<br /> * Andy Spencer (Martin de Selincourt, 4/12/13)<br /> * Jon Green (Martin de Selincourt, 4/12/13)<br /> * Danny Garden (Martin de Selincourt, 4/12/13)<br /> * Steve Wiseman (Martin de Selincourt, 4/12/13)<br /> * Patrick Wollner (David Barham, 18/2/14)<br /> * Leonardo Impett (David Barham, 18/2/14)<br /> * Diana Probst (Brian Starkey, 19/3/14)<br /> * Hidde-Jan Lemstra (Brian Starkey, 19/3/14)<br /> * Francisco Cordobes (Brian Starkey, 19/3/14)<br /> * Peter Ferguson (Mat Cook March 5 2014)<br /> * Tim Hayward (Mat Cook March 5 2014)<br /> * Jason White (Mat Cook March 5 2014)<br /> * Stuart Wilson (Mat Cook March 5 2014)<br /> * Steve Harrison (Mat Cook March 5 2014)<br /> * Alex Atkinson (Mat Cook March 12 2014)<br /> * Kate Aston (Mat Cook March 12 2014)<br /> * Sheila Shepherd (Mat Cook March 12 2014)<br /> * Rachel Bow (Mat Cook March 12 2014)<br /> * Emyr James (Mat Cook March 12 2014)<br /> * Peter Knight (Mat Cook March 12 2014)<br /> * Andy Gale (Mat Cook March 26 2014)<br /> * Owen McAree (Mat Cook March 26 2014)<br /> * Michal Stefenow (Mat Cook March 26 2014)<br /> * Neil Tan (Mat Cook March 26 2014)<br /> * Vaiva Kalmkaite? (Mat Cook Apr 23 2014)<br /> * Alberto Santos (Mat Cook Apr 23 2014)<br /> * Sonny Siree (sp?) (Mat Cook Apr 23 2014)<br /> * Tim Ronsell (Mat Cook Apr 23 2014)<br /> * Rob Voisey (Mat Cook Apr 23 2014)<br /> * Mike Hunter (Mat Cook Apr 23 2014)<br /> * Tony Bunting (Brian Starkey 30/4/14)<br /> * Eric Jones (Brian Starkey 30/4/14)<br /> * Carl Phillips (Brian Starkey 30/4/14)<br /> * Ed Ben (Brian Starkey 30/4/14)<br /> * Toby Norman (Brian Starkey 30/4/14)<br /> * Marco Galardini (Mat Cook May 7 2014)<br /> * Thomas Keller (Mat Cook May 7 2014)<br /> * Martin Lenz (Mat Cook 28 May 2014)<br /> * David Grech (Mat Cook 28 May 2014)<br /> * Rick Lupton (Mat Cook 28 May 2014)<br /> * Tim Regan (Mat Cook 28 May 2014)<br /> * Shashank Srinivasan (Mat Cook 28 May 2014)<br /> * Al Napp (Mat Cook 4 June 2014)<br /> * Tom Roberts (Mat Cook 4 June 2014)<br /> * Matthew Taylor (Mat Cook 4 June 2014)<br /> * Milosz Wasilewski (Mat Cook 4 June 2014)<br /> * Matt Grimes (Brian Starkey 11/06/14)<br /> * Brandon Invergo (Brian Starkey 11/06/14)<br /> * Simon West (Brian Starkey 11/06/14)<br /> * Kevin Rathbone (Brian Starkey 11/06/14)<br /> * Richard Gordon (Brian Starkey 11/06/14)<br /> * Rob Yates (Brian Starkey 12/07/14)<br /> * Alex Gee (Brian Starkey 12/07/14)<br /> * Patrick Beigent (Brian Starkey 12/07/14)<br /> * Guilliame Tucker (Brian Starkey 12/07/14)<br /> * Jo Brook (Brian Starkey 12/07/14)<br /> * David Taylor (Brian Starkey 12/07/14)<br /> * Joe Watson (Brian Starkey 23/07/14)<br /> * Richard Armstrong (Brian Starkey 23/07/14)<br /> * Eric Gowland (Brian Starkey 23/07/14)<br /> * Paul Holland (Brian Starkey 23/07/14)<br /> * Craig Richardson (Brian Starkey 23/07/14)<br /> * Stevan Wing (Mat Cook 11/08/2014)<br /> * John Sidiropoulos (Mat Cook 11/08/2014)<br /> * Greaham Douglas (Stevan Wing 17/09/2014)<br /> * Joseph Gamble (Stevan Wing 17/09/2014)<br /> * Robert Fryers (Stevan Wing 17/09/2014)<br /> * Will Hartley (Stevan Wing 17/09/2014)<br /> * Alistair Turnbull (Stevan Wing 24/09/2014)<br /> * Tim Ramsdale (Stevan Wing 24/09/2014)<br /> * Hugo Van Sansen (Stevan Wing 24/09/2014) <br /> * Marco Aita (David Barham 08/10/2014)<br /> * Rob Shore (David Barham 08/10/2014)<br /> * Katy Marshall (David Barham 08/10/2014)<br /> * John Clarke (David Barham 08/10/2014)<br /> * Danny Farrant (Stevan Wing 15/10/2014)<br /> * John Ginger (Stevan Wing 15/10/2014)<br /> * Emilo Mont (Stevan Wing 15/10/2014)<br /> * Geoff Lunn (Stevan Wing 15/10/2014)<br /> * Milosch Meriac (Stevan Wing 05/11/2014)<br /> * Abhi Manyu (Stevan Wing 05/11/2014)<br /> * Alba Rodriguez (Stevan Wing 05/11/2014)<br /> * Stephen Paulger (Stevan Wing 05/11/2014)<br /> * Erik Pickering (Stevan Wing 05/11/2014)<br /> * Rob Meadows (Stevan Wing 03/12/2014)<br /> * Chris Mayhurst (Stevan Wing 03/12/2014)<br /> * Giovanni Orlando (Stevan Wing 03/12/2014)<br /> * Chris Padbury (Stevan Wing 03/12/2014)<br /> * Robin Sterling (Stevan Wing 03/12/2014)<br /> * Kristien De Clercq (Stevan Wing 03/12/2014)<br /> * &quot;Nevindep&quot; (Mat Cook 11 Dec 2014)<br /> * Jae Turner (Mat Cook 11 Dec 2014)<br /> * Luke Twydell (Mat Cook 11 Dec 2014)<br /> * Steph Tyszka (Mat Cook 20 Dec 2014)<br /> * Jonny Waite (Brian Starkey 3/9/14)<br /> * Toby Jaffey (Brian Starkey 3/9/14)<br /> * Greg Matthews (Brian Starkey 3/9/14)<br /> * Tom Parker (Brian Starkey 12/11/14)<br /> * Ben Weeks (Brian Starkey 12/11/14)<br /> * Clara Todd (Brian Starkey 17/12/14)<br /> * Ian Mc (Brian Starkey 17/12/14)<br /> * Timothy Baldock (Brian Starkey 17/12/14)<br /> * Rob Rescrola (Brian Starkey 7/1/15)<br /> * Tariq Harris (Brian Starkey 7/1/15)<br /> * Ed Robertson (Brian Starkey 7/1/15)<br /> * Imogen Ford (Brian Starkey 7/1/15)<br /> * Dan Tidhar (Brian Starkey 7/1/15)<br /> * Tom Stroud (Brian Starkey 28/1/15)<br /> * Graeme ??? (Brian Starkey 28/1/15)<br /> * Henry Begg (Brian Starkey 28/1/15)<br /> * Phil McArthur (Brian Starkey 28/1/15)<br /> * Alex Judd (Martin de Selincourt 11/02/2015)<br /> * Adam Mulligan (Martin de Selincourt 11/02/2015)<br /> * Adam Nightingale (Martin de Selincourt 11/02/2015)<br /> * Charlotte Harvey (Martin de Selincourt 11/02/2015)<br /> * Matt Wayland (Martin de Selincourt 11/02/2015)<br /> * Andrei R. (Martin de Selincourt 11/02/2015)<br /> * John Mead (Martin de Selincourt 11/02/2015)<br /> <br /> = More trained users =<br /> <br /> Fully trained:<br /> * Hugo Keene (Mat Cook 31/03/2015)<br /> * Antony Congedo (Mat Cook 31/03/2015)<br /> * Alina Velea (Mat Cook 31/03/2015)<br /> * Nik Newark (Brian Starkey 22/4/15)<br /> * Claire Harriette (Brian Starkey 22/4/15)<br /> * Dittany Rose (Brian Starkey 22/4/15)<br /> * Martin Prescott (Brian Starkey 22/4/15)<br /> * Abi Bush (Brian Starkey 6/05/2015)<br /> * Arik Kershenbaum (Brian Starkey 6/05/2015)<br /> * Alexandra Grigore (Brian Starkey 6/05/2015)<br /> * Roy Gwinn (Brian Starkey 6/05/2015)<br /> * Josh Kaggie (Brian Starkey 6/05/2015)<br /> * Stoyan Smoukov (Brian Starkey 6/05/2015)<br /> * Adam Reig (Stevan Wing 27/05/2015)<br /> * Nicola Westgarth-Flynn (Stevan Wing 27/05/2015)<br /> * Dave Jordan (Stevan Wing 27/05/2015)<br /> * Khameinei Ali (Stevan Wing 27/05/2015)<br /> * Fotis Georgatos (Stevan Wing 27/05/2015)<br /> * Tianheng Zhao (Stevan Wing 27/05/2015)<br /> * Oliver Fleck (Rob Voisey 16/06/2015)<br /> * Johan Henriksson (Rob Voisey 16/06/2015)<br /> * Daryl Stewart (Rob Voisey 16/06/2015)<br /> * Frodi Jones (Rob Voisey 16/06/2015)<br /> * Andrew Mulholland (Rob Voisey 16/06/2015)<br /> * Tobias Wenzel (Brian Starkey 19/06/2015)<br /> * Alex Ridge (Brian Starkey 19/06/2015)<br /> * Louis Kovalevsky (Brian Starkey 19/06/2015)<br /> * Rich Hall (Brian Starkey 19/06/2015)<br /> * Ben Alper (Brian Starkey 19/06/2015)<br /> * Chandu Sekhar (Brian Starkey 19/06/2015)<br /> * Patrick ? (Rob Voisey 23/06/2015)<br /> * Andrew Cooke (Rob Voisey 23/06/2015)<br /> * Rosy Hunt (Rob Voisey 23/06/2015)<br /> * Tim Radvan (Rob Voisey 23/06/2015)<br /> * Benjamin Thomas Summers (Rob Voisey 23/06/2015)<br /> * Tom Hartley (Rob Voisey 02/07/2015)<br /> * Lucia Corsini (Rob Voisey 02/07/2015)<br /> * Clive Beale (Brian Starkey 29/07/2015)<br /> * Tumi Jones (Brian Starkey 29/07/2015)<br /> * Daniel Bailey (Brian Starkey 29/07/2015)<br /> * Tom Garton (Brian Starkey 29/07/2015)<br /> * Alice Milligan (Brian Starkey 29/07/2015)<br /> * Phill Banks (Brian Starkey 4/08/2015)<br /> * Ned Booker (Brian Starkey 4/08/2015)<br /> * Karan Gupta (Brian Starkey 4/08/2015)<br /> * Dave Frost (Brian Starkey 4/08/2015)<br /> * Fred Sorgeloos (Brian Starkey 4/08/2015)<br /> * Abigail Tyrrell (Rob Voisey 27/11/2015)<br /> * David Jordan (Rob Voisey 27/11/2015)<br /> * Robyn Kerrison (Rob Voisey 27/11/2015)<br /> * Andrea Cipri (Rob Voisey 27/11/2015)<br /> * Jakub Sanak (Rob Voisey 27/11/2015)<br /> <br /> = Yet more trained users =<br /> <br /> * Training 18 Nov 2015 (Mat Cook)<br /> ** Jack Brewster<br /> ** Mark Wainwright<br /> ** Kate Aston (again)<br /> ** Mayke Santos<br /> ** Barry Plows<br /> ** Victor Rybnok - no show, not trained, not a fully inducted member<br /> * Training 05 Dec 2015 (Mat Cook)<br /> ** Leo Rines (needs keyfob fully activating)<br /> ** Naomi Griffiths<br /> ** Jose Chitty<br /> ** David Haines<br /> ** Simon Hartley<br /> * Bogdan Spiridon (17/9/15 Brian Starkey)<br /> * Stewart Barton (17/9/15 Brian Starkey)<br /> * Jonathan Hughes (17/9/15 Brian Starkey)<br /> * Anija Dokter (17/9/15 Brian Starkey)<br /> * Paul Bond (17/9/15 Brian Starkey)<br /> * Thomas Richardson (6/1/16 Brian Starkey)<br /> * William Deeks (6/1/16 Brian Starkey)<br /> * Jonathan Woolf (6/1/16 Brian Starkey)<br /> * Mark Radford (6/1/16 Brian Starkey)<br /> * Tom Kelly (6/1/16 Brian Starkey)<br /> * Giovanni Bisutti (6/1/16 Brian Starkey)<br /> * Victor Rybynok (2/2/16 David Barham)<br /> * Olivier Martin (2/2/16 David Barham)<br /> * Craig Easton (23/03/16 Brian Starkey)<br /> * Daniel Zerbino (23/03/16 Brian Starkey)<br /> * Jeremy Minton (23/03/16 Brian Starkey)<br /> * Shunsuke Fujibayashi (23/03/16 Brian Starkey)<br /> * Charna Hume (23/03/16 Brian Starkey)<br /> * Jamie Powell (23/03/16 Brian Starkey)<br /> * Thomas Gillepie (5/4/16 Tom Parker)<br /> * Mark Barnard (5/4/16 Tom Parker)<br /> * Francois Eve (18/04/16 Brian Starkey)<br /> * David Hurron (18/04/16 Brian Starkey)<br /> * Paul Routly (18/04/16 Brian Starkey)<br /> * Thomas Wagner (18/04/16 Brian Starkey)<br /> * Steve Carey (18/04/16 Brian Starkey)<br /> * Sophie Weeks (18/04/16 Brian Starkey)<br /> * Dan Evans (3/05/16 Tom Parker)<br /> * Thomas Grant (3/05/16 Tom Parker)<br /> * Thomas Arrow (3/05/16 Tom Parker)<br /> * David Marcus (3/05/16 Tom Parker)<br /> * Joe Halstead (3/05/16 Tom Parker)<br /> * Steve Murphy (3/05/16 Tom Parker)<br /> * Martin Hollis (3/05/16 Tom Parker)<br /> * Miguel Morin (21/06/16 Brian Starkey)<br /> * Cadu Miceli (21/06/16 Brian Starkey)<br /> * Joe Studwell (21/06/16 Brian Starkey)<br /> * Adrien Leger (21/06/16 Brian Starkey)<br /> * Mik Lamming (13/07/16 Brian Starkey)<br /> * Thomas Sanders (13/07/16 Brian Starkey)<br /> * Natalie Ward (13/07/16 Brian Starkey)<br /> * Ben Hurren (13/07/16 Brian Starkey)<br /> * Hsin-ling Liang (10/08/16 Brian Starkey)<br /> * Cat Fitzpatrick (10/08/16 Brian Starkey)<br /> * Michael Schmid (10/08/16 Brian Starkey)<br /> * Nadia Bassiri (10/08/16 Brian Starkey)<br /> * Htoo Wai Htet (10/08/16 Brian Starkey)<br /> * Spencer Wilson (10/08/16 Brian Starkey)<br /> * Mihai Truta (4/10/16 David Barham)<br /> * Simon Guest (4/10/16 David Barham)<br /> * Will Nock (4/10/16 David Barham)<br /> * Dan Tidhar (4/10/16 David Barham)<br /> * Ziyi Yu (4/10/16 David Barham)<br /> * David Crawford (4/10/16 David Barham)<br /> * Rick Amos (20/10/16 Steve Murphy)<br /> * Joe Eadon (20/10/16 Steve Murphy)<br /> * Ziyi Yu (20/10/16 Steve Murphy)<br /> * Brendan Cawley (20/10/16 Steve Murphy)<br /> * Joachim De Jonghe (20/10/16 Steve Murphy)<br /> * Arthur Queval (27/10/16 Steve Murphy)<br /> * Andy Saul (27/10/16 Steve Murphy)<br /> * Thomas Meany (27/10/16 Steve Murphy)<br /> * Ronny Schluetter (27/10/16 Steve Murphy)<br /> * Ben Brebner (27/10/16 Steve Murphy)<br /> * Scott Cunliffe (4/1/2017 Miguel Morin)<br /> * Tian Huang (4/1/2017 Miguel Morin)<br /> * Steven Burgess (4/1/2017 Miguel Morin)<br /> * James Potter (15/1/2017 Miguel Morin)<br /> * Ross Rounsevell (15/1/2017 Miguel Morin)<br /> * Abigail Wills (15/1/2017 Miguel Morin)<br /> * Lynne Horton (15/1/2017 Miguel Morin)<br /> * Andrew Velle (15/1/2017 Miguel Morin)<br /> * Thomas Kopsch (15/1/2017 Miguel Morin)<br /> * Dario Bressan (12/2/2017 Miguel Morin)<br /> * Lisa Smith (12/2/2017 Miguel Morin)<br /> * Luke Heavens (12/2/2017 Miguel Morin)<br /> * Lucy Copping (12/2/2017 Miguel Morin)<br /> * Tobias Herold (02/03/2017 Tom Parker)<br /> * Chloe Thomas (02/03/2017 Tom Parker)<br /> * Hugh Craft (02/03/2017 Tom Parker)<br /> * Angela Birlea (02/03/2017 Tom Parker)<br /> * Gemma Goodfellow (28/03/2017 David Barham)<br /> * Mark Williamson (28/03/2017 David Barham)<br /> * Steven Penney (28/03/2017 David Barham)<br /> * Simon Marache-Francisco (28/03/2017 David Barham)<br /> * Tommaso Leonardi (15/04/2017 Miguel Morin)<br /> * Rasko Leinonen (15/04/2017 Miguel Morin)<br /> * Arnet Addis (15/04/2017 Miguel Morin)<br /> * James O'Sul­livan (15/04/2017 Miguel Morin)<br /> * Training 6 May 2017 (Miguel Morin)<br /> ** Carlos Araque<br /> ** Ian Guebert<br /> ** Richard Dwan<br /> * Peter Murray-Rus­t (7/6/17 Tom Parker)<br /> * Hardie Pienaar (7/6/17 Tom Parker)<br /> * Rob Sandford (7/6/17 Tom Parker)<br /> * Despina Davoudani (7/6/17 Tom Parker)<br /> * Training 22 July 2017 (Miguel Morin)<br /> ** Richard Blakesley<br /> ** Doroteja Maklin<br /> ** Daniel Attila Tovisi<br /> ** Alex Johannsson<br /> * Trained 15 August 2017 (David Barham)<br /> ** Andy Clark<br /> ** Jenni Main<br /> ** Angus Main<br /> ** Richard Seymour<br /> ** Becky Warren<br /> ** Sean Sleator<br /> ** Lucy Shipp<br /> * Trained 13 Sept 2017 (Katy Marshall / David Barham)<br /> ** David Rodriguez<br /> ** Matthew Timmons-Brown<br /> ** Joanna Brunker<br /> ** Marcel Gehrung<br /> * Trained 19 Sept 2017 (Katy Marshall)<br /> ** Chammi Udalamatta<br /> <br /> = Training Cheatsheet =<br /> <br /> The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.<br /> <br /> == Group Training ==<br /> <br /> The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.<br /> <br /> Introduction of main components<br /> * Laser<br /> * Cutting Mechanics<br /> * Water Cooler System<br /> * Filter<br /> * PC<br /> * Materials (what it can cut, supply)<br /> <br /> Checks for everyone to do<br /> * Check in use, looks ok<br /> * Check water bath, temperature<br /> <br /> Powering Up<br /> * Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)<br /> * Turning on Laser and warmup, what to do if doesn't power up<br /> * Turning on PC and starting software<br /> <br /> LaserCut Project walkthrough (using M+S+text keyring example)<br /> * Package function, drawing, import file types<br /> * Bed dimensions<br /> * Paths, yellow dots, 'united' shapes<br /> * Blue dot, Immediate mode<br /> * Layers and colours<br /> * Through cut, surface cut and engraving, speeds and strengths<br /> * Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)<br /> * Job ordering <br /> * Saving<br /> * Download as immediate, delete, download current<br /> <br /> Laser Operation<br /> * Lid<br /> * Control panel, escape<br /> * Moving head XY, indicator laser, datum<br /> * Moving Z<br /> * Focus<br /> * Start position and test<br /> * Start, pause and emergency stop function<br /> * Do job, pause/open lid, restart<br /> <br /> Laser Hazards<br /> * Process and progression for normal operation failure (fire) - pause, open, move, CO2 <br /> * Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2<br /> * Ensure confident of process<br /> <br /> Power Down<br /> * Switch off laser<br /> * Switch off filtration<br /> * Clean any residue from the bed or bottom tray<br /> * Close lid<br /> <br /> == Individual Training Task ==<br /> <br /> The individual task to get familiar, prompt questions and check understanding:<br /> <br /> Task<br /> * Make a personalised focus tool<br /> * Square acrylic of appropriate size<br /> * Member's name, &quot;Focus Tool&quot;, keychain hole<br /> * Should use full cut, surface cut, engrave<br /> * Should demonstrate all steps, size, appropriate ordering, positioning<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to lasering (watch carefully all steps)<br /> * Ask to stop job/restart, question escalation process<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Add to the trained member list!<br /> <br /> == Project Oversight ==<br /> <br /> For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/3D_Printer/UM2Training 2017-07-24T20:54:28Z

<p>Kitkatmarshall: /* Trained Users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/3D Printer|UM2]] / Training<br /> <br /> = Ultimaker 2 3D Printer Training =<br /> <br /> This page documents the process for being trained on the Ultimaker 2 Printer, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~20min each)<br /> * Recommended project oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)<br /> <br /> A shorter conversion training session is available for members who were previously signed off to use the Makerbot 2X printer. These sessions last around 20 minutes and do not include individual sessions.<br /> <br /> == Booking ==<br /> <br /> For discussing and arranging slots, please use the mailing list. New training sessions will be announced on the Meetup group.<br /> <br /> Notes:<br /> * You can only be trained if you have RSVP'd to a Meetup session<br /> <br /> == Training Cheatsheet - Conversion Course ==<br /> <br /> Members already trained on and familiar with the Makerbot 2X can attend this short conversion course to be signed off to use the Ultimaker 2 3D printer. Up to 10 people can be accommodated on each course, which lasts 20 to 30 minutes.<br /> <br /> 1. Physical Differences from the 2X<br /> * Glass build plate, no kapton tape<br /> * Single extruder<br /> * Push feed<br /> <br /> 2. General<br /> * Use the correct filament (2.85mm, NOT 3mm or 1.75mm)<br /> * New filament storage system<br /> <br /> 3. Printing<br /> * Fence / Brim / Raft<br /> * OK to leave printer unattended after the first few layers<br /> * Camera available for remote monitoring<br /> * Use only plastic implements for part removal, take care not to melt them on the hot end<br /> <br /> 4. Cura Software<br /> * Import and place<br /> * Simple mode<br /> * Brief overview of advanced mode<br /> * Temperature set on printer not slicer<br /> * Exporting to SD card<br /> <br /> 5. Unload / Load filament<br /> * How to feed (slow first, then fast)<br /> * Select correct material in menu<br /> * Changing temperature and speed parameters from printer<br /> * Demonstrate the atomic method of cleaning the extruder to prevent feed jams<br /> <br /> 6. Filament pricing<br /> * 5p per gram for PLA and ABS, to be kept under review<br /> * Include wastage!<br /> <br /> == Training Cheatsheet - Full Course ==<br /> <br /> '''Group Session'''<br /> <br /> 1. Ask what each member hopes to get out of the 3D printer.<br /> <br /> 2. Explain how 3D printing works<br /> <br /> 3. Safety<br /> * Burn hazard – nozzle and build plate<br /> * Unit may move unexpectedly<br /> * Avoid prolonged exposure to ABS fumes<br /> <br /> 4. Damage to machine<br /> * Fragile build plate<br /> * Jammed filament<br /> <br /> 5. General<br /> * Use the correct filament (2.85mm)<br /> * Filament storage and feed system<br /> * Switch off when finished<br /> * Leave levelling to the owners but report any problems<br /> <br /> 6. PLA vs ABS<br /> * How to tell the difference<br /> * Different temperature<br /> * PLA Biodegradable<br /> * See the Wiki for tips on printing with ABS and cleaning after<br /> <br /> 7. Software / workflow<br /> * Importing<br /> * Positioning on bed<br /> * Supports<br /> * Setting quality / speed trade off<br /> * Advanced options<br /> * Exporting to SD card<br /> * Wiki for tips on Cura<br /> <br /> 8. Unload / load<br /> * Check filament for damadge, cut filament at an angle (see Wiki for problems when loading)<br /> * Attaching spool. Ensure correct direction and not tangled<br /> * Feeding (slow then fast)<br /> * Beware of wrapping round axle<br /> * Setting material in menu<br /> * Adjusting parameters, e.g. ABS plate temperature<br /> <br /> 9. Printing<br /> * Preheating<br /> * Fence printing<br /> * Keep an eye on progress, locally or with camera<br /> * If leaving unattended, put a post-it (or badger) with your contact details<br /> * Use only plastic implements for part removal<br /> <br /> 10. Other stuff<br /> * Demonstrate atomic method of cleaning the nozzle to prevent feed jams<br /> * Strength characteristics – orientation is important<br /> * '''Paying'''<br /> <br /> '''Individual Training Task'''<br /> <br /> Task<br /> * Should demonstrate import, setup, position and run<br /> * Choose a part that takes about 10 mins to print (preloaded on PC)<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to printing (watch carefully all steps)<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Highlight the wiki for more information and owners email address on poster<br /> * Add to the trained member list<br /> <br /> '''Project Oversight'''<br /> <br /> For next 2-3 projects, recommend member will find another more experienced trained user to support them (second pair of eyes)<br /> <br /> '''Record Training On Wiki'''<br /> <br /> <br /> == Please write your name clearly below ==<br /> <br /> * The trainer will add you to the Trained Users page on the Wiki but can't do that if they are unable to read your name.<br /> * Please remember to check the Wiki for tips and updates on using the Ultimaker.<br /> <br /> Date of training:<br /> <br /> == Trained Users ==<br /> <br /> The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):<br /> <br /> * Paul Osborn (Rob Voisey, 2015-07-30)<br /> * Julius Schmidt (Rob Voisey, 2015-07-30)<br /> * Peter Knight (Rob Voisey, 2015-07-30)<br /> * Adam Mulligan (Rob Voisey, 2015-07-30)<br /> * Charlotte Harvey (Rob Voisey, 2015-07-30)<br /> * Alex Gee (Rob Voisey, 2015-07-30)<br /> * Albert Santos (Rob Voisey, 2015-07-30)<br /> * Zizwani Mhango (Rob Voisey, 2015-07-30)<br /> * Christie Nel (Rob Voisey, 2015-07-30)<br /> * Robert Karpinski (Rob Voisey, 2015-07-30)<br /> * Alexis Mather (Stephen Harrison, 2015-08-03)<br /> * Ben Wheatley (Stephen Harrison, 2015-08-03)<br /> * Stevan Wing (Stephen Harrison, 2015-08-03)<br /> * Jae Tumer (Stephen Harrison, 2015-08-03)<br /> * Jennifer Herbert (Stephen Harrison, 2015-08-03)<br /> * Frodi Jones (Stephen Harrison, 2015-08-03)<br /> * Matt Wayland (Stephen Harrison, 2015-08-03)<br /> * Marco Aite (Stephen Harrison, 2015-08-03)<br /> * Graeham Douglas (Stephen Harrison, 2015-08-03)<br /> * Robin Sterling (Stephen Harrison, 2015-08-07)<br /> * Abhi Manyu (Stephen Harrison, 2015-08-07)<br /> * Ward Hills (Stephen Harrison, 2015-08-07)<br /> * Carols A. Lugo (Stephen Harrison, 2015-08-07)<br /> * Ben Alper (Stephen Harrison, 2015-08-07)<br /> * Jon Green (Stephen Harrison, 2015-08-07)<br /> * Marcin Izo (Stephen Harrison, 2015-08-07)<br /> * Steve Upton (Rob Voisey, 2015-08-11)<br /> * Frederic Sorgeloos (Rob Voisey, 2015-08-11)<br /> * Andrew Cooke (Rob Voisey, 2015-08-11)<br /> * Ned Booker (Rob Voisey, 2015-08-11)<br /> * Daryl Stewart (Paul Edgington, 2015-08-24)<br /> * Nacho Lopez (Paul Edgington, 2015-08-24)<br /> * Ed Robertson (Paul Edgington, 2015-08-24)<br /> * Clive Beale (Paul Edgington, 2015-08-24)<br /> * Oliver Fleck (Paul Edgington, 2015-08-24)<br /> * Mark Cheverton (Rob Voisey, 2015-09-08)<br /> * Nik (Rob Voisey, 2015-09-08)<br /> * Dan Tidhar (Rob Voisey, 2015-09-08)<br /> * Tobias Wenzel (Rob Voisey, 2015-09-08)<br /> * Brian Starkey (Rob Voisey, 2015-09-08)<br /> * Jonathan Waite (Rob Voisey, 2015-09-08)<br /> * Emyr James (Rob Voisey, 2015-09-08)<br /> * Richard Hall (Rob Voisey, 2015-09-08)<br /> * Andrew Dunn (Rob Voisey, 2015-09-08)<br /> * Andrea Cipri (Paul Edgington, 2015-09-30)<br /> * John Sidinopoulos (Paul Edgington, 2015-09-30)<br /> * Stuart Barton (Paul Edgington, 2015-09-30)<br /> * Mark Calleta (Paul Edgington, 2015-09-30)<br /> * Martin Lenz (Paul Edgington, 2015-09-30)<br /> * Phill Banks (Paul Edgington, 2015-10-21)<br /> * Felix Morley (Paul Edgington, 2015-10-21)<br /> * David Jordan (Paul Edgington, 2015-10-21)<br /> * Mark Roberts (Stephen Harrison, 2015-10-23)<br /> * Jenny Molloy (Stephen Harrison, 2015-10-23)<br /> * Henry Cawley (Rob Voisey, 2015-11-18)<br /> * Bogdan Spiridom (Rob Voisey, 2015-11-18)<br /> * Jakub Sanak (Rob Voisey, 2015-11-18)<br /> * Jack Brewster (Rob Voisey, 2015-11-18)<br /> * Mayke Santos (Rob Voisey, 2015-11-18)<br /> * Luis Veiga Pumar (Stephen Harrison, 2015-11-24)<br /> * Greg Matthews (Stephen Harrison, 2015-11-24)<br /> * Brian Corteil (Stephen Harrison, 2015-11-24)<br /> * Rob Rescorla (Stephen Harrison, 2015-11-24)<br /> * Leo Rones (Stephen Harrison, 2015-11-24)<br /> * Diana Probst (Stephen Harrison, 2015-11-25)<br /> * Adrian van den Heever (Stephen Harrison, 2015-11-25)<br /> * Al Napp (Stephen Harrison, 2015-11-25)<br /> * Katy Marshall (Stephen Harrison, 2015-12-01)<br /> * Peter Mottram (Stephen Harrison, 2015-12-01)<br /> * David Barham (Stephen Harrison, 2015-12-01)<br /> * Johan Henriksson­ (Stephen Harrison, 2015-12-01)<br /> * Fotis Fotiadis (Stephen Harrison, 2015-12-01)<br /> * Oliver Martin (Stephen Harrison, 2015-12-01)<br /> * Andrew Drummond (Stephen Harrison, 2015-12-01)<br /> * Spencer Dixon (Stephen Harrison, 2015-12-01)<br /> * Jonathan Woolf (Rob Voisey, 2016-01-07)<br /> * Daniel Bailey (Rob Voisey, 2016-01-07)<br /> * David Haines (Rob Voisey, 2016-01-07)<br /> * Giovanni Bisutii (Rob Voisey, 2016-01-07)<br /> * Simon Hartley (Daniel Bailey, 2016-02-11)<br /> * Francois Eve (Daniel Bailey, 2016-02-11)<br /> * Giovanni Orlando (Daniel Bailey, 2016-02-11)<br /> * Dan Tidhar (Daniel Bailey, 2016-02-11)<br /> * Shunsuke Fujibayash­i (Daniel Bailey, 2016-03-04)<br /> * Ronny Schlutter (Daniel Bailey, 2016-03-04)<br /> * Jamie Powell (Daniel Bailey, 2016-03-04)<br /> * Mark Wainwright (Daniel Bailey, 2016-03-04)<br /> * Charna Hume (Daniel Bailey, 2016-03-04)<br /> * Charlotte Godley (Daniel Bailey, 2016-03-04)<br /> * Jose Chitty (Stephen Harrison, 2016-03-22)<br /> * Mat Greenwood (Stephen Harrison, 2016-03-22)<br /> * David Fisher (Stephen Harrison, 2016-03-22)<br /> * Tom Kelly (Stephen Harrison, 2016-03-22)<br /> * David Bebb (Stephen Harrison, 2016-04-12)<br /> * David Taylor (Stephen Harrison, 2016-04-12)<br /> * Jo Brook (Stephen Harrison, 2016-04-12)<br /> * Craig Easton (Daniel Bailey, 2016-04-20)<br /> * James Griffiths (Daniel Bailey, 2016-04-20)<br /> * Paul Routley (Daniel Bailey, 2016-04-20)<br /> * Steve Murphy (Daniel Bailey, 2016-04-20)<br /> * Cong Cong Bo (Daniel Bailey, 2016-06-24)<br /> * Adrien Leger (Daniel Bailey, 2016-06-24)<br /> * David Marcus (Daniel Bailey, 2016-06-24)<br /> * Mik Lamming (Stephen Harrison, 2016-07-06)<br /> * Rob MacAulay (Stephen Harrison, 2016-07-06)<br /> * Daniel Farrant (Stephen Harrison, 2016-07-06)<br /> * Steve Carey (Stephen Harrison, 2016-07-06)<br /> * Debora Rodriguez (Daniel Bailey, 2016-07-30)<br /> * David Horsnell (Daniel Bailey, 2016-07-30)<br /> * Cat Fitzpatrick (Daniel Bailey, 2016-08-12)<br /> * Hsingling Lian (Daniel Bailey, 2016-08-12)<br /> * Jeremy Bentham (Daniel Bailey, 2016-08-12)<br /> * Nadia Bassiri (Daniel Bailey, 2016-08-12)<br /> * Thomas Wanger (Daniel Bailey, 2016-08-12)<br /> * Migual Morin (Stephen Harrison, 2016-09-23)<br /> * Eric Jones (Stephen Harrison, 2016-09-23)<br /> * Will Nock (Stephen Harrison, 2016-09-23)<br /> * Mihai Truta (Stephen Harrison, 2016-09-23)<br /> * Grawham Douglas (Stephen Harrison, 2016-09-23)<br /> * Hedley Simons (Stephen Harrison, 2016-10-20)<br /> * Ravan Keerthi (Stephen Harrison, 2016-10-20)<br /> * Richard Hosking (Stephen Harrison, 2016-11-14)<br /> * Zuke Heavens (Stephen Harrison, 2016-11-14)<br /> * Volker Eckert (Stephen Harrison, 2016-11-14)<br /> * Tian Huang (Stephen Harrison, 2016-11-14)<br /> * Craig Richardson (Stephen Harrison, 2016-11-14)<br /> * Charlie Stokes (Stephen Harrison, 2016-11-23)<br /> * Ben Brebner (Stephen Harrison, 2016-11-23)<br /> * Thomas Kopsch (Stephen Harrison, 2016-11-23)<br /> * Mateusz Kosturek (Stephen Harrison, 2016-11-23)<br /> * Alex Bate (Stephen Harrison, 2016-11-30)<br /> * Martha Levine (Stephen Harrison, 2016-11-30)<br /> * John Perdue (Stephen Harrison, 2016-11-30)<br /> * Carlos Pereira Atencio (Stephen Harrison, 2016-11-30)<br /> * Francisco Pelligar (Stephen Harrison, 2016-12-05)<br /> * Rick Smith (Stephen Harrison, 2016-12-05)<br /> * Mark Chapman (Stephen Harrison, 2016-12-05)<br /> * Peter Spencer (Stephen Harrison, 2016-12-05)<br /> * Josh Kaggie (Stephen Harrison, 2016-12-11)<br /> * Ian Spolton (Stephen Harrison, 2016-12-11)<br /> * Angela Birlea (Stephen Harrison, 2017-02-09)<br /> * Scott Cunliffe (Stephen Harrison, 2017-02-09)<br /> * Boyuan Xiao (Stephen Harrison, 2017-02-09)<br /> * Peter Molnar (Stephen Harrison, 2017-02-20)<br /> * Andy Clark (Stephen Harrison, 2017-02-09)<br /> * Nikolay Pchelintsev (Stephen Harrison, 2017-02-09)<br /> * Tim Rowsful (Stephen Harrison, 2017-03-02)<br /> * Joe Escott (Stephen Harrison, 2017-03-02)<br /> * Dean Kos (Stephen Harrison, 2017-03-02)<br /> * Despina Devoudani (Stephen Harrison, 2017-03-21)<br /> * John Doherty (Stephen Harrison, 2017-03-21)<br /> * Peter Murray-Rust (Stephen Harrison, 2017-03-21)<br /> * Tom Oinn (Stephen Harrison, 2017-03-21)<br /> * Rob Sandford (Will Nock, 2017-03-27)<br /> * Gemma Goodfellow (Will Nock, 2017-03-27)<br /> * Tommaso Leonardi (Will Nock, 2017-03-27)<br /> * Carlos Araque (Will Nock, 2017-03-27)<br /> * James Potter (Stephen Harrison, 2017-05-10)<br /> * Ian Guebert (Stephen Harrison, 2017-05-10)<br /> * Xorge Castro (Stephen Harrison, 2017-05-10)<br /> * George Agnew (Stephen Harrison, 2017-05-10)<br /> * Tom Feather (Stephen Harrison, 2017-05-10)<br /> * Simon Marache-Francisco (Will Nock, 2017-05-17)<br /> * Hardie Pienaar (Will Nock, 2017-05-17)<br /> * Moti Tabulo (Will Nock, 2017-05-17)<br /> * Andy Fisher (Will Nock, 2017-05-17)<br /> * Marie Besnier (Katy Marshall,2017-06-06)<br /> * Graskc Van Leeuwei (Katy Marshall,2017-06-06)<br /> * Lin Zheng (Katy Marshall,2017-06-06)<br /> * Jose Diez (Stephen Harrison, 2017-07-14)<br /> * Richard Green (Stephen Harrison, 2017-07-14)<br /> * Doroteja Maklin (Stephen Harrison, 2017-07-14)<br /> * Daniel Tovisi (Stephen Harrison, 2017-07-14)<br /> * Andrzej Kaczorowski (Stephen Harrison, 2017-07-14)<br /> * Laura James (Katy Marshall, 2017-07-20)<br /> * Michael Dales (Katy Marshall, 2017-07-20)<br /> * Sammy Mahdi (Katy Marshall, 2017-07-20)<br /> * Angus Main (Katy Marshall, 2017-07-20)<br /> * Jenni Main (Katy Marshall, 2017-07-24)<br /> * Sean Sleator (Katy Marshall, 2017-07-24)<br /> * Chammi Udalamatta (Katy Marshall, 2017-07-24)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/3D_Printer/UM2Training 2017-07-21T10:23:02Z

<p>Kitkatmarshall: /* Trained Users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/3D Printer|UM2]] / Training<br /> <br /> = Ultimaker 2 3D Printer Training =<br /> <br /> This page documents the process for being trained on the Ultimaker 2 Printer, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~20min each)<br /> * Recommended project oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)<br /> <br /> A shorter conversion training session is available for members who were previously signed off to use the Makerbot 2X printer. These sessions last around 20 minutes and do not include individual sessions.<br /> <br /> == Booking ==<br /> <br /> For discussing and arranging slots, please use the mailing list. New training sessions will be announced on the Meetup group.<br /> <br /> Notes:<br /> * You can only be trained if you have RSVP'd to a Meetup session<br /> <br /> == Training Cheatsheet - Conversion Course ==<br /> <br /> Members already trained on and familiar with the Makerbot 2X can attend this short conversion course to be signed off to use the Ultimaker 2 3D printer. Up to 10 people can be accommodated on each course, which lasts 20 to 30 minutes.<br /> <br /> 1. Physical Differences from the 2X<br /> * Glass build plate, no kapton tape<br /> * Single extruder<br /> * Push feed<br /> <br /> 2. General<br /> * Use the correct filament (2.85mm, NOT 3mm or 1.75mm)<br /> * New filament storage system<br /> <br /> 3. Printing<br /> * Fence / Brim / Raft<br /> * OK to leave printer unattended after the first few layers<br /> * Camera available for remote monitoring<br /> * Use only plastic implements for part removal, take care not to melt them on the hot end<br /> <br /> 4. Cura Software<br /> * Import and place<br /> * Simple mode<br /> * Brief overview of advanced mode<br /> * Temperature set on printer not slicer<br /> * Exporting to SD card<br /> <br /> 5. Unload / Load filament<br /> * How to feed (slow first, then fast)<br /> * Select correct material in menu<br /> * Changing temperature and speed parameters from printer<br /> * Demonstrate the atomic method of cleaning the extruder to prevent feed jams<br /> <br /> 6. Filament pricing<br /> * 5p per gram for PLA and ABS, to be kept under review<br /> * Include wastage!<br /> <br /> == Training Cheatsheet - Full Course ==<br /> <br /> '''Group Session'''<br /> <br /> 1. Ask what each member hopes to get out of the 3D printer.<br /> <br /> 2. Explain how 3D printing works<br /> <br /> 3. Safety<br /> * Burn hazard – nozzle and build plate<br /> * Unit may move unexpectedly<br /> * Avoid prolonged exposure to ABS fumes<br /> <br /> 4. Damage to machine<br /> * Fragile build plate<br /> * Jammed filament<br /> <br /> 5. General<br /> * Use the correct filament (2.85mm)<br /> * Filament storage and feed system<br /> * Switch off when finished<br /> * Leave levelling to the owners but report any problems<br /> <br /> 6. PLA vs ABS<br /> * How to tell the difference<br /> * Different temperature<br /> * PLA Biodegradable<br /> * See the Wiki for tips on printing with ABS and cleaning after<br /> <br /> 7. Software / workflow<br /> * Importing<br /> * Positioning on bed<br /> * Supports<br /> * Setting quality / speed trade off<br /> * Advanced options<br /> * Exporting to SD card<br /> * Wiki for tips on Cura<br /> <br /> 8. Unload / load<br /> * Check filament for damadge, cut filament at an angle (see Wiki for problems when loading)<br /> * Attaching spool. Ensure correct direction and not tangled<br /> * Feeding (slow then fast)<br /> * Beware of wrapping round axle<br /> * Setting material in menu<br /> * Adjusting parameters, e.g. ABS plate temperature<br /> <br /> 9. Printing<br /> * Preheating<br /> * Fence printing<br /> * Keep an eye on progress, locally or with camera<br /> * If leaving unattended, put a post-it (or badger) with your contact details<br /> * Use only plastic implements for part removal<br /> <br /> 10. Other stuff<br /> * Demonstrate atomic method of cleaning the nozzle to prevent feed jams<br /> * Strength characteristics – orientation is important<br /> * '''Paying'''<br /> <br /> '''Individual Training Task'''<br /> <br /> Task<br /> * Should demonstrate import, setup, position and run<br /> * Choose a part that takes about 10 mins to print (preloaded on PC)<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to printing (watch carefully all steps)<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Highlight the wiki for more information and owners email address on poster<br /> * Add to the trained member list<br /> <br /> '''Project Oversight'''<br /> <br /> For next 2-3 projects, recommend member will find another more experienced trained user to support them (second pair of eyes)<br /> <br /> '''Record Training On Wiki'''<br /> <br /> <br /> == Please write your name clearly below ==<br /> <br /> * The trainer will add you to the Trained Users page on the Wiki but can't do that if they are unable to read your name.<br /> * Please remember to check the Wiki for tips and updates on using the Ultimaker.<br /> <br /> Date of training:<br /> <br /> == Trained Users ==<br /> <br /> The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):<br /> <br /> * Paul Osborn (Rob Voisey, 2015-07-30)<br /> * Julius Schmidt (Rob Voisey, 2015-07-30)<br /> * Peter Knight (Rob Voisey, 2015-07-30)<br /> * Adam Mulligan (Rob Voisey, 2015-07-30)<br /> * Charlotte Harvey (Rob Voisey, 2015-07-30)<br /> * Alex Gee (Rob Voisey, 2015-07-30)<br /> * Albert Santos (Rob Voisey, 2015-07-30)<br /> * Zizwani Mhango (Rob Voisey, 2015-07-30)<br /> * Christie Nel (Rob Voisey, 2015-07-30)<br /> * Robert Karpinski (Rob Voisey, 2015-07-30)<br /> * Alexis Mather (Stephen Harrison, 2015-08-03)<br /> * Ben Wheatley (Stephen Harrison, 2015-08-03)<br /> * Stevan Wing (Stephen Harrison, 2015-08-03)<br /> * Jae Tumer (Stephen Harrison, 2015-08-03)<br /> * Jennifer Herbert (Stephen Harrison, 2015-08-03)<br /> * Frodi Jones (Stephen Harrison, 2015-08-03)<br /> * Matt Wayland (Stephen Harrison, 2015-08-03)<br /> * Marco Aite (Stephen Harrison, 2015-08-03)<br /> * Graeham Douglas (Stephen Harrison, 2015-08-03)<br /> * Robin Sterling (Stephen Harrison, 2015-08-07)<br /> * Abhi Manyu (Stephen Harrison, 2015-08-07)<br /> * Ward Hills (Stephen Harrison, 2015-08-07)<br /> * Carols A. Lugo (Stephen Harrison, 2015-08-07)<br /> * Ben Alper (Stephen Harrison, 2015-08-07)<br /> * Jon Green (Stephen Harrison, 2015-08-07)<br /> * Marcin Izo (Stephen Harrison, 2015-08-07)<br /> * Steve Upton (Rob Voisey, 2015-08-11)<br /> * Frederic Sorgeloos (Rob Voisey, 2015-08-11)<br /> * Andrew Cooke (Rob Voisey, 2015-08-11)<br /> * Ned Booker (Rob Voisey, 2015-08-11)<br /> * Daryl Stewart (Paul Edgington, 2015-08-24)<br /> * Nacho Lopez (Paul Edgington, 2015-08-24)<br /> * Ed Robertson (Paul Edgington, 2015-08-24)<br /> * Clive Beale (Paul Edgington, 2015-08-24)<br /> * Oliver Fleck (Paul Edgington, 2015-08-24)<br /> * Mark Cheverton (Rob Voisey, 2015-09-08)<br /> * Nik (Rob Voisey, 2015-09-08)<br /> * Dan Tidhar (Rob Voisey, 2015-09-08)<br /> * Tobias Wenzel (Rob Voisey, 2015-09-08)<br /> * Brian Starkey (Rob Voisey, 2015-09-08)<br /> * Jonathan Waite (Rob Voisey, 2015-09-08)<br /> * Emyr James (Rob Voisey, 2015-09-08)<br /> * Richard Hall (Rob Voisey, 2015-09-08)<br /> * Andrew Dunn (Rob Voisey, 2015-09-08)<br /> * Andrea Cipri (Paul Edgington, 2015-09-30)<br /> * John Sidinopoulos (Paul Edgington, 2015-09-30)<br /> * Stuart Barton (Paul Edgington, 2015-09-30)<br /> * Mark Calleta (Paul Edgington, 2015-09-30)<br /> * Martin Lenz (Paul Edgington, 2015-09-30)<br /> * Phill Banks (Paul Edgington, 2015-10-21)<br /> * Felix Morley (Paul Edgington, 2015-10-21)<br /> * David Jordan (Paul Edgington, 2015-10-21)<br /> * Mark Roberts (Stephen Harrison, 2015-10-23)<br /> * Jenny Molloy (Stephen Harrison, 2015-10-23)<br /> * Henry Cawley (Rob Voisey, 2015-11-18)<br /> * Bogdan Spiridom (Rob Voisey, 2015-11-18)<br /> * Jakub Sanak (Rob Voisey, 2015-11-18)<br /> * Jack Brewster (Rob Voisey, 2015-11-18)<br /> * Mayke Santos (Rob Voisey, 2015-11-18)<br /> * Luis Veiga Pumar (Stephen Harrison, 2015-11-24)<br /> * Greg Matthews (Stephen Harrison, 2015-11-24)<br /> * Brian Corteil (Stephen Harrison, 2015-11-24)<br /> * Rob Rescorla (Stephen Harrison, 2015-11-24)<br /> * Leo Rones (Stephen Harrison, 2015-11-24)<br /> * Diana Probst (Stephen Harrison, 2015-11-25)<br /> * Adrian van den Heever (Stephen Harrison, 2015-11-25)<br /> * Al Napp (Stephen Harrison, 2015-11-25)<br /> * Katy Marshall (Stephen Harrison, 2015-12-01)<br /> * Peter Mottram (Stephen Harrison, 2015-12-01)<br /> * David Barham (Stephen Harrison, 2015-12-01)<br /> * Johan Henriksson­ (Stephen Harrison, 2015-12-01)<br /> * Fotis Fotiadis (Stephen Harrison, 2015-12-01)<br /> * Oliver Martin (Stephen Harrison, 2015-12-01)<br /> * Andrew Drummond (Stephen Harrison, 2015-12-01)<br /> * Spencer Dixon (Stephen Harrison, 2015-12-01)<br /> * Jonathan Woolf (Rob Voisey, 2016-01-07)<br /> * Daniel Bailey (Rob Voisey, 2016-01-07)<br /> * David Haines (Rob Voisey, 2016-01-07)<br /> * Giovanni Bisutii (Rob Voisey, 2016-01-07)<br /> * Simon Hartley (Daniel Bailey, 2016-02-11)<br /> * Francois Eve (Daniel Bailey, 2016-02-11)<br /> * Giovanni Orlando (Daniel Bailey, 2016-02-11)<br /> * Dan Tidhar (Daniel Bailey, 2016-02-11)<br /> * Shunsuke Fujibayash­i (Daniel Bailey, 2016-03-04)<br /> * Ronny Schlutter (Daniel Bailey, 2016-03-04)<br /> * Jamie Powell (Daniel Bailey, 2016-03-04)<br /> * Mark Wainwright (Daniel Bailey, 2016-03-04)<br /> * Charna Hume (Daniel Bailey, 2016-03-04)<br /> * Charlotte Godley (Daniel Bailey, 2016-03-04)<br /> * Jose Chitty (Stephen Harrison, 2016-03-22)<br /> * Mat Greenwood (Stephen Harrison, 2016-03-22)<br /> * David Fisher (Stephen Harrison, 2016-03-22)<br /> * Tom Kelly (Stephen Harrison, 2016-03-22)<br /> * David Bebb (Stephen Harrison, 2016-04-12)<br /> * David Taylor (Stephen Harrison, 2016-04-12)<br /> * Jo Brook (Stephen Harrison, 2016-04-12)<br /> * Craig Easton (Daniel Bailey, 2016-04-20)<br /> * James Griffiths (Daniel Bailey, 2016-04-20)<br /> * Paul Routley (Daniel Bailey, 2016-04-20)<br /> * Steve Murphy (Daniel Bailey, 2016-04-20)<br /> * Cong Cong Bo (Daniel Bailey, 2016-06-24)<br /> * Adrien Leger (Daniel Bailey, 2016-06-24)<br /> * David Marcus (Daniel Bailey, 2016-06-24)<br /> * Mik Lamming (Stephen Harrison, 2016-07-06)<br /> * Rob MacAulay (Stephen Harrison, 2016-07-06)<br /> * Daniel Farrant (Stephen Harrison, 2016-07-06)<br /> * Steve Carey (Stephen Harrison, 2016-07-06)<br /> * Debora Rodriguez (Daniel Bailey, 2016-07-30)<br /> * David Horsnell (Daniel Bailey, 2016-07-30)<br /> * Cat Fitzpatrick (Daniel Bailey, 2016-08-12)<br /> * Hsingling Lian (Daniel Bailey, 2016-08-12)<br /> * Jeremy Bentham (Daniel Bailey, 2016-08-12)<br /> * Nadia Bassiri (Daniel Bailey, 2016-08-12)<br /> * Thomas Wanger (Daniel Bailey, 2016-08-12)<br /> * Migual Morin (Stephen Harrison, 2016-09-23)<br /> * Eric Jones (Stephen Harrison, 2016-09-23)<br /> * Will Nock (Stephen Harrison, 2016-09-23)<br /> * Mihai Truta (Stephen Harrison, 2016-09-23)<br /> * Grawham Douglas (Stephen Harrison, 2016-09-23)<br /> * Hedley Simons (Stephen Harrison, 2016-10-20)<br /> * Ravan Keerthi (Stephen Harrison, 2016-10-20)<br /> * Richard Hosking (Stephen Harrison, 2016-11-14)<br /> * Zuke Heavens (Stephen Harrison, 2016-11-14)<br /> * Volker Eckert (Stephen Harrison, 2016-11-14)<br /> * Tian Huang (Stephen Harrison, 2016-11-14)<br /> * Craig Richardson (Stephen Harrison, 2016-11-14)<br /> * Charlie Stokes (Stephen Harrison, 2016-11-23)<br /> * Ben Brebner (Stephen Harrison, 2016-11-23)<br /> * Thomas Kopsch (Stephen Harrison, 2016-11-23)<br /> * Mateusz Kosturek (Stephen Harrison, 2016-11-23)<br /> * Alex Bate (Stephen Harrison, 2016-11-30)<br /> * Martha Levine (Stephen Harrison, 2016-11-30)<br /> * John Perdue (Stephen Harrison, 2016-11-30)<br /> * Carlos Pereira Atencio (Stephen Harrison, 2016-11-30)<br /> * Francisco Pelligar (Stephen Harrison, 2016-12-05)<br /> * Rick Smith (Stephen Harrison, 2016-12-05)<br /> * Mark Chapman (Stephen Harrison, 2016-12-05)<br /> * Peter Spencer (Stephen Harrison, 2016-12-05)<br /> * Josh Kaggie (Stephen Harrison, 2016-12-11)<br /> * Ian Spolton (Stephen Harrison, 2016-12-11)<br /> * Angela Birlea (Stephen Harrison, 2017-02-09)<br /> * Scott Cunliffe (Stephen Harrison, 2017-02-09)<br /> * Boyuan Xiao (Stephen Harrison, 2017-02-09)<br /> * Peter Molnar (Stephen Harrison, 2017-02-20)<br /> * Andy Clark (Stephen Harrison, 2017-02-09)<br /> * Nikolay Pchelintsev (Stephen Harrison, 2017-02-09)<br /> * Tim Rowsful (Stephen Harrison, 2017-03-02)<br /> * Joe Escott (Stephen Harrison, 2017-03-02)<br /> * Dean Kos (Stephen Harrison, 2017-03-02)<br /> * Despina Devoudani (Stephen Harrison, 2017-03-21)<br /> * John Doherty (Stephen Harrison, 2017-03-21)<br /> * Peter Murray-Rust (Stephen Harrison, 2017-03-21)<br /> * Tom Oinn (Stephen Harrison, 2017-03-21)<br /> * Rob Sandford (Will Nock, 2017-03-27)<br /> * Gemma Goodfellow (Will Nock, 2017-03-27)<br /> * Tommaso Leonardi (Will Nock, 2017-03-27)<br /> * Carlos Araque (Will Nock, 2017-03-27)<br /> * James Potter (Stephen Harrison, 2017-05-10)<br /> * Ian Guebert (Stephen Harrison, 2017-05-10)<br /> * Xorge Castro (Stephen Harrison, 2017-05-10)<br /> * George Agnew (Stephen Harrison, 2017-05-10)<br /> * Tom Feather (Stephen Harrison, 2017-05-10)<br /> * Simon Marache-Francisco (Will Nock, 2017-05-17)<br /> * Hardie Pienaar (Will Nock, 2017-05-17)<br /> * Moti Tabulo (Will Nock, 2017-05-17)<br /> * Andy Fisher (Will Nock, 2017-05-17)<br /> * Marie Besnier (Katy Marshall,2017-06-06)<br /> * Graskc Van Leeuwei (Katy Marshall,2017-06-06)<br /> * Lin Zheng (Katy Marshall,2017-06-06)<br /> * Jose Diez (Stephen Harrison, 2017-07-14)<br /> * Richard Green (Stephen Harrison, 2017-07-14)<br /> * Doroteja Maklin (Stephen Harrison, 2017-07-14)<br /> * Daniel Tovisis (Stephen Harrison, 2017-07-14)<br /> * Andrzej Kaczorowski (Stephen Harrison, 2017-07-14)<br /> * Laura James (Katy Marshall, 2017-07-20)<br /> * Michael Dales (Katy Marshall, 2017-07-20)<br /> * Sammy Mahdi (Katy Marshall, 2017-07-20)<br /> * Angus Main (Katy Marshall, 2017-07-20)</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/3D_Printer/UM2 2017-06-06T20:54:10Z

<p>Kitkatmarshall: /* Trainers */</p> <hr /> <div>{{RedTool}}<br /> <br /> == Ultimaker 2 &amp; 2+ ==<br /> <br /> [[File:UltimakerWithLid.png|left]]<br /> <br /> The Ultimaker 2 and 2+ printers are the newest FDM printers at MS. Its design is of a later generation than our [[Equipment/3D_Printer/Makerbot|Makerbot Replicator 2X]] and [[Equipment/3D_Printer/Up|UP!]]. The method of printing is almost identical but the implementation is more refined, so as a result the UM2 is expected to be faster, quieter and more reliable (in terms of both print outcome and maintenance).<br /> <br /> The 2+ is almost identical to the 2+ but has an improved feed mechanism, hot end and cooling arrangement. It is intended that our UM2 will be upgraded to 2+ equivalence in due course.<br /> <br /> The manufacturer's product information page is [https://ultimaker.com/en/products/ultimaker-2-family/ultimaker-2 here].<br /> <br /> == Owners ==<br /> <br /> The Owners are those nominally in charge of the equipment, organising its maintenance, training others to use it, and generally being a point of contact. <br /> <br /> The current Owners of the Ultimaker are:<br /> * Mat Cook<br /> * Paul Edgington<br /> * [[User:StephenHarrison|Stephen Harrison]]<br /> * Tom Parker<br /> * Alberto Santos<br /> * John Sidiropoulos<br /> * [[User:Robv|Rob Voisey]]<br /> * [[User:Danieljabailey|Daniel Bailey]]<br /> If you have any questions, problems or concerns around the 3D printer, these are the people to contact.<br /> <br /> == Trainers ==<br /> <br /> The Trainers are not in charge of maintaining equipment, but have been more thoroughly instructed in its use and can train others. They may run extra classes for recently trained learners.<br /> <br /> The current Trainers for the Ultimaker are:<br /> * [[User:Robv|Rob Voisey]]<br /> * Paul Edgington<br /> * [[User:StephenHarrison|Stephen Harrison]]<br /> * [[User:Danieljabailey|Daniel Bailey]]<br /> * Katy Marshall<br /> <br /> == Training ==<br /> <br /> &lt;div style=&quot;background:#FADADD; border:1px solid #FFC0CB; padding:5px&quot;&gt;<br /> &lt;b&gt;YOU CAN ONLY USE THE ULTIMAKER IF YOU HAVE BEEN TRAINED&lt;/b&gt;&lt;br&gt;<br /> and have been added to the [[Equipment/3D Printer/UM2Training#Trained_Users|UM2 Trained Users]] list by one of the Owners or Trainers<br /> &lt;/div&gt;<br /> <br /> To get trained on the Ultimaker and be added to the qualified user list, you will need to arrange for a training session with one of the owners. <br /> <br /> If you'd like to arrange training, please see:<br /> * [[Equipment/3D Printer/UM2Training|UM2 Printer Training]]<br /> <br /> Note that persons who were previously trained on the Makerbot and UP! can attend a short conversion course to be signed off on the Ultimaker. Such members should not use the Ultimaker without having done this.<br /> <br /> == General Health and Safety ==<br /> <br /> The Ultimaker is an expensive tool with a (small) risk of injury and fire, so is very important you know how to use it to avoid damaging yourself and the machine. The Ultimaker is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the Ultimaker are:<br /> <br /> * '''ONLY USE THE ULTIMAKER IF YOU HAVE BEEN TRAINED'''<br /> * '''ONLY USE THE ULTIMAKER IF YOU HAVE READ THE INSTRUCTIONS'''<br /> <br /> As a responsible user, you should be very aware of the following risks and how to deal with them:<br /> <br /> '''HEAD CRASH''' - incorrect calibration could cause the nozzle to hit the platen at job start<br /> * Pay close to attention to the start of the job and be prepared to immediately abort the job if necessary<br /> <br /> '''TRAPPING''' - The head and bed of the machine are moved by programs in the machine's memory.<br /> * Be careful when near the machine, it will possibly move even if the PC is off<br /> * Ensure you are familiar with the 'Pause' and 'Abort printing' functions on the Ultimaker so that in an emergency you can quickly halt printing.<br /> <br /> '''BURN RISK''' - the platen on the printer is heated, and will reach temperatures up to 100C during a print run which could cause skin burns. The extrusion nozzle can reach temperatures of up to 260C. Do not touch either of these areas while printing, and keep the guard door securely closed while printing.<br /> * Be careful when the machine has recently been used, especially when removing your print, as it may still be hot enough to burn<br /> <br /> '''ELECTROCUTION''' - as with all mains powered devices there is a small risk of danger from exposed wires. Always do a manual check that the wiring is safe, no cores are exposed or wires trapped.<br /> <br /> '''FUMES''' - In high concentrations ABS fumes may cause irritation. Do not spend extended periods over the printer whilst it is printing, and turn on the extractor/inlet fans of the main space when doing long print runs.<br /> <br /> == Plastics used in the printer ==<br /> <br /> '''IMPORTANT''' The Ultimaker uses 2.85mm diameter filament. This must not be confused with the 1.75mm filament used by the other FDM printers at MS.<br /> <br /> The Ultimaker can print with three different thermoplastics; PLA (Polylactic Acid), ABS (Acrylonitrile Butadiene Styrene) and CPE. It is important to select the correct material on the printer control panel when loading filament as the printing parameters vary significantly.<br /> <br /> '''PLA''' has a relatively low melting point and is capable of producing high quality prints at very fast speeds. It produces very few fumes and the odour from the melted material is actually quite pleasant. Prints are durable but not as strong as ABS, nonetheless this tends to be the material of choice for printing on the Ultimaker. PLA is available is a wide array of colours and finishes including metallic, glittery and stone effect.<br /> <br /> '''ABS''' has a higher melting point than PLA and can be hard to get to stick to the platen. It generally requires a hot platen and raised/consistent ambient (which is why we have added a door and lid to the Ultimaker). Although more difficult to work with the resultant prints can be very strong.<br /> <br /> '''CPE''' is a newer material with similar properties to ABS but without the fumes. This material needs to be printed at a high temperature which causes rapid wear of certain components in the extruder. For this reason we do not stock CPE and request that you contact an owner before using it.<br /> <br /> The communal stock is kept in plastic boxes under the printers. Plastic filament is susceptible to absorption of moisture (i.e. it is hygroscopic) which causes it to expand and jam in the printer. For this reason the boxes have been fitted with a recirculating dehumidification system. It is important that the lids are removed for the shortest time possible, and that filament is returned to the box as quickly as possible when printing is complete. This will minimise wastage and reduce our costs.<br /> <br /> == Specific Safety Tips ==<br /> <br /> There is a burn hazard from the nozzles and the heated platter, as mentioned above. The Ultimaker will display its current temperatures but you should not rely on this. The head may also move unexpectedly. Do not open the front door or place any part of your person inside the machine during or immediately prior to printing. ABS fumes over a long period may be harmful - if you feel light-headed take a break in a well ventilated area.<br /> <br /> 3D printing can be a lengthy process and you are not required to stand by the printer for the whole duration. You should, however, be present for the first few minutes, monitor your print using the webcam, and whenever possible be nearby to abort a failed print. If you spot the printer unattended with a failed print (this is obvious when it happens, with a rats nest of filament quickly forming) you are encouraged to abort the print on behalf of its creator.<br /> <br /> Always switch the printer off at the back when you are finished.<br /> <br /> == Avoiding Damage to the Machine ==<br /> <br /> The bed is made from glass. Use only plastic implements to remove your prints to minimise the risk of damaging the glass. Should you need to remove the bed for any reason (it is held in with clips) take care handling it and perform a bed levelling operation when you refit it.<br /> <br /> The bed should generally be kept clean and free from dust. Wipe only with a lint free cloth (micro fibre cloths are provided) and avoid touching the build surface with your skin.<br /> <br /> == Using SD cards with the Ultimaker == <br /> <br /> The Ultimaker 2 does not yet support direct connection to a PC* so you must copy your sliced (G-code) file to a DOS formatted SD card using the SD card writer attached to the PC, and then insert the card into the printer. We have found the Ultimaker to work with most modern cards. Some SD cards are available next to the printer - please remember to return them after use.<br /> <br /> * Cura claims to support USB printing but this is unreliable. Launching Cura with an Ultimaker 2 attached via USB can cause the current print to stop immediately and leave the nozzle and build plate at the last position (nose deep in hot filament).<br /> <br /> == Remote access - Watch the printer via the Internet == <br /> <br /> '''Sorry. Currently broken due to network gear changes.'''<br /> <br /> You can view your Ultimaker print remotely, this allows you to check that the print hasn't failed and to monitor when the printer is finished before returning to the space to collect your print.<br /> <br /> Navigate to [http://makespace.ddns.net:8000/ PLA Printer] or [http://makespace.ddns.net:8001 ABS Printer] and select the Control tab. <br /> <br /> * You do not need to be logged into OctoPrint to view the camera, anybody can view it (you may wish to cover the camera if you are printing sensitive projects).<br /> * Internet Explorer doesn't appear to support the streaming video, Use Chrome or FireFox (untested with other browsers).<br /> * It's can be a little slow to load and may be unresponsive when multiple people are connected.<br /> * The url will only work outside of the Makespace network. See the links on Chrome toolbar on the the Ultimaker PC for internal addresses.<br /> <br /> We use OctoPrint for the streaming and messages only. The Ultimaker does not behave correctly when connecting via USB so other functionality is not available.<br /> <br /> == Ultimaker Tips == <br /> <br /> '''Blocked nozzle when loading filament:'''<br /> <br /> We've had a number of blockages reported when members are trying to load the filament. <br /> <br /> 1) Sometimes this is not actually the nozzle being blocked but the filament feed pipe not being fully homed into the extruder. If you have problems getting the filament to load check the feed pipe where it enters the extruder, if you notice a ring around the pipe above the white press fit fitting then the pipe has not been fitted correctly and the filament will hit the inside of the extruder before it even gets to the PTFE coupler.<br /> <br /> [[File:FeedpipeInsertion.png]]<br /> <br /> You may resolve the issue by un-clipping the white push-fit fitting, pressing down and removing the pipe then carefully re-inserting it ensuring it is straight and fully homed. You should not see any rings around the pipe when it is fully homed and inspection of the middle of the extruder you should see the pipe butted up against the white PTFE coupler between the extruder body and nozzle.<br /> <br /> This problem may be more apparent if you are using filament that is nearing the end of the reel where the filament becomes very curved. Try a different filament that is straighter.<br /> <br /> 2) Sometimes the filament hits the side wall of the PTFE coupler before it enters the hot end. When you remove the filament from a failed load check the end, if it has not been heated then it did not make it to the nozzle. Try loading it again.<br /> <br /> When loading the filament cut the end at an angle as this reduces the chances of it getting stuck.<br /> <br /> '''Blocked nozzle / feed failure during printing'''<br /> <br /> The reason is that some burnt leftover filament remains inside the extruder from the previous print, because the lower extrusion temperature for PLA does not completely melt the unwanted material. Often this doesn't prevent initial loading of PLA because the material change cycle heats the nozzle to a higher temperature, but during printing the feed can be reduced or blocked entirely.<br /> <br /> The UM2 printer is prone to nozzle blockage when switching from ABS to PLA filament (or from any higher temperature material to a lower temperature material), we have found that separating PLA and ABS on different printers reduced the nozzle problems. Do not mix printers and materials. <br /> <br /> If you plan to use a material other than regular ABS/PLA please discuss it with the owners. Nylon appears to have caused a number of problems on the ABS printers (we found this out by needing to fix the printer and finding nylon residue in the printer head - The person printing probably may have been happy, the people after found a broken printer).<br /> <br /> Instructions here: [https://ultimaker.com/en/support/149-atomic-method Ultimaker Atomic Method]<br /> <br /> There are some important notes:<br /> <br /> 1. Take great care not to lose the little blue bowden tube clamp clip. It has a tendency to ping across the room!<br /> <br /> 2. The instructions say to use a quick firm pull to remove the filament. They mean it! If you pull slowly the filament will simply stretch and you'll have to start over.<br /> <br /> 3. On reassembly ensure that the bowden tube is pushed fully into position. See above!<br /> <br /> 4. Be sure to refit the little blue bowden tube. We cannot buy replacements for these and they help improve print quality.<br /> <br /> '''Filament stuck in tube / Unable to remove filament:'''<br /> <br /> Occasionally the filament will remove with a ball on the hot end bigger than the diameter of the tube, it then gets stuck. When this happens keep repeating the remove filament process (change filament, try remove, cancel load).<br /> <br /> You may find it useful to apply a little extra downwards force on the filament under the feeder as it is being removed, this also helps if the filament jammed and caused the feeder to take a bite out of the filament.<br /> <br /> '''General 3D printing Quality Tips'''<br /> <br /> Check out the excellent [https://www.simplify3d.com/support/print-quality-troubleshooting/ 3D printing quality troubleshooting guide] from Simplify 3D<br /> <br /> '''Cura software tips'''<br /> <br /> [https://ultimaker.com/en/products/cura-software Download Ultimaker Cura Software]<br /> <br /> The Cura software remembers the previous settings used for a print and in some cases carries the advanced settings over to the basic option but doesn't display it (e.g. Brim). This can cause problems in a shared environment that the Ultimaker PC lives in as you may not get appropriate printing settings for your print if the last person adjusted them. Use the Clean Cura link on the desktop or reboot the PC to restore Cura settings back to the default.<br /> <br /> As the Ultimaker prints from an SD card and material settings are set on the printer itself you may prefer to install the Cura software on your own computer and save the file to an SD Card rather than using the Ultimaker PC to ensure you have settings that work best for your use case.<br /> <br /> Version 2.x is the newer version of Cura (Not 15.xx).<br /> <br /> Be sure to select the correct material when using Cura. We are not sure what effect it has on the slicer. Temperature settings are set by the printer.<br /> <br /> Ensure the the 0.4mm Nozzle is selected.<br /> <br /> If you need more advanced slicing try Simplify 3D (you will need to buy your own license). You can define processing layers within Simplify and have different settings (infill etc) for those layers) [https://www.simplify3d.com/ Simplify 3D]<br /> <br /> Layers view in Cura can be incredibly useful (Select the eye icon in the left hand side).<br /> <br /> 1. Drill down to Layer 1, this is the most critical. Ensure you have the parts of the model on the build plate you expect (if you have as slight overhang in your model that would be on the plate this shows up).<br /> 2. If you have Brim or Supports selected, these are shown in the Layers view as different colours.<br /> 3. It can be useful to enable supports in this view as you may find somewhere that needs supports that you missed.<br /> <br /> Printing Profiles:<br /> <br /> 1. Fast Print. This works really well and still has a good quality. I often increase the layer height to 0.2 or o.25mm to get an even quicker print and it still works well.<br /> 2. Normal Print. If you need a better quality print try this. It will be slower than Fast Print.<br /> 3. High Quality. Use this only if you really need high quality (look for the yellow chess piece for an example). This will be very slow to print - the chess piece took 12 hours.<br /> <br /> '''Filament not on a reel'''<br /> <br /> Short lengths of filament are sold by many places rather than a full reel worth, we have a MakeSpace laser cut acrylic reel that you can use to roll these onto and place on the back of the Ultimaker. It has a larger diameter center to help. This is kept in the loose filament box. If it has filament on it already remove that filament.<br /> <br /> '''Ultimaker Lid'''<br /> <br /> Ultimaker do not provide a lid for the UM2 so we have a laser cut acrylic MakeSpace made one. Please be gentle with it!<br /> <br /> If you have problems with the lid please report it to the Ultimaker Owners to allow us to improve the design and fix issues.<br /> <br /> You should not need to remove the lid in normal day to day use. If you do remove it please ensure you replace it as it keeps dust from getting onto the plate (which messes up the print - Makespace is VERY dusty!) and helps keep the printing environment temperature better which should help improve your prints. The lid can be tilted back 90° and rested on the top of the printer if you need access to the nozzle.<br /> <br /> '''ABS Printing'''<br /> <br /> The default setting for the Ultimaker bed temperature is fairly low for ABS, we have found prints do not stick well at this temperature.<br /> <br /> * When loading ABS check the bed temperature displayed on the screen when selecting the material<br /> * A custom option is pre-defined for ABS with a higher bed temperature, we recommend around 110°C bed temperature for ABS.<br /> * If you selected the wrong option when loading the filament the bed temperature can be adjusted when printing through the &quot;Tune&quot; menu option.<br /> <br /> If the print does not stick try using the purple glue sticks.<br /> <br /> ABS has a tendency to warp (lift) when printed, especially the corners of boxes. Use a Brim in Cura to reduce this and improve general bed adhesion.<br /> <br /> '''Be sure to clean the bed after printing with a glue stick (or other adhesion method)'''<br /> <br /> The purple glue sticks work well for printing ABS and for cleaning up afterwards. The glue sets clear but when damp will appear purple again. When you have finished your print and the bed cooled use a damp cloth to remove the glue until their is no more purple.<br /> <br /> If the bed is very messy please contact the owners so we can remove the glass plate and clean it.<br /> <br /> '''Fun filaments'''<br /> <br /> We may not have a stock of these so you may wish to get your own (or request the owners to purchase if you just want a small quantity), but if you are looking for a fun effect on your print they are worth a look<br /> <br /> * Bronze Gold. Creates a great steam punk look. [http://shop.3dfilaprint.com/filaprint-bronze-gold-premium-pla-285mm-3d-printer-filament-1295-p.asp 3DFilaprint Bronze Gold 2.85mm PLA]<br /> * Thermochanging Blue Green to Yellow Green. Changes colour with temperature (body heat is enough). [http://shop.3dfilaprint.com/reprapper-tech-pla-3mm-blue-green-to-yellow-green-thermochanging-filament-592-p.asp Reprapper Tech PLA 3mm Blue Green to Yellow Green]<br /> <br /> Purple thermochanging filament did not want to stick to the printer bed.<br /> <br /> <br /> '''Ultimaker Community'''<br /> <br /> Be sure to check out the [https://ultimaker.com/en/community/dashboard Ultimaker Community site] it is very active and a great resource.<br /> <br /> == Filament storage == <br /> <br /> We have a few dedicated filament storage boxes for the Ultimaker. These boxes are humidity controlled and have a Silica gel cartridge fitted to the lid to remove moisture. Yes, they are internet connected to allow the owners to monitor the humidity level and replace the silica gel when required. We aim to keep the humidity level below 15% in the box.<br /> <br /> * Ensure the lid is kept closed on the filament storage boxes, leaving the lid off will degrade the silica gel quickly.<br /> * Be sure to return the filament to the correct storage box after use to prevent undue exposure to moisture in the air which can ruin the filament.<br /> * Do not store your own filament in the filament boxes. Personal filament should be stored in your own MakeSpace box. <br /> ** Keep your filament in a sealed plastic bag (or wrap with clingfilm).<br /> ** We have a supply of Silica gel on the shelf above the Ultimaker, you may wish to add a scoop or two into your bag to keep the moisture down. Use only the Orange colour silica gel. Green/Brown gel needs to be cooked to remove moisture. <br /> ** Do not eat the silica gel!!!<br /> <br /> == Maintenance == <br /> <br /> See [[Ultimaker Maintenance]]<br /> <br /> -----------------<br /> <br /> TO BE COMPLETED ASAP</div>

Kitkatmarshall http://wiki.makespace.org/Equipment/3D_Printer/UM2Training 2017-06-06T20:53:29Z

<p>Kitkatmarshall: /* Trained Users */</p> <hr /> <div>[[Equipment|Equipment]] / [[Equipment/3D Printer|UM2]] / Training<br /> <br /> = Ultimaker 2 3D Printer Training =<br /> <br /> This page documents the process for being trained on the Ultimaker 2 Printer, and the list of members who have completed that training.<br /> <br /> == Summary ==<br /> <br /> Training takes place in three main steps:<br /> * Group Training of 1-4 members, going through the equipment and how to use it (~1hr)<br /> * Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~20min each)<br /> * Recommended project oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)<br /> <br /> A shorter conversion training session is available for members who were previously signed off to use the Makerbot 2X printer. These sessions last around 20 minutes and do not include individual sessions.<br /> <br /> == Booking ==<br /> <br /> For discussing and arranging slots, please use the mailing list. New training sessions will be announced on the Meetup group.<br /> <br /> Notes:<br /> * You can only be trained if you have RSVP'd to a Meetup session<br /> <br /> == Training Cheatsheet - Conversion Course ==<br /> <br /> Members already trained on and familiar with the Makerbot 2X can attend this short conversion course to be signed off to use the Ultimaker 2 3D printer. Up to 10 people can be accommodated on each course, which lasts 20 to 30 minutes.<br /> <br /> 1. Physical Differences from the 2X<br /> * Glass build plate, no kapton tape<br /> * Single extruder<br /> * Push feed<br /> <br /> 2. General<br /> * Use the correct filament (2.85mm, NOT 3mm or 1.75mm)<br /> * New filament storage system<br /> <br /> 3. Printing<br /> * Fence / Brim / Raft<br /> * OK to leave printer unattended after the first few layers<br /> * Camera available for remote monitoring<br /> * Use only plastic implements for part removal, take care not to melt them on the hot end<br /> <br /> 4. Cura Software<br /> * Import and place<br /> * Simple mode<br /> * Brief overview of advanced mode<br /> * Temperature set on printer not slicer<br /> * Exporting to SD card<br /> <br /> 5. Unload / Load filament<br /> * How to feed (slow first, then fast)<br /> * Select correct material in menu<br /> * Changing temperature and speed parameters from printer<br /> * Demonstrate the atomic method of cleaning the extruder to prevent feed jams<br /> <br /> 6. Filament pricing<br /> * 5p per gram for PLA and ABS, to be kept under review<br /> * Include wastage!<br /> <br /> == Training Cheatsheet - Full Course ==<br /> <br /> '''Group Session'''<br /> <br /> 1. Ask what each member hopes to get out of the 3D printer.<br /> <br /> 2. Explain how 3D printing works<br /> <br /> 3. Safety<br /> * Burn hazard – nozzle and build plate<br /> * Unit may move unexpectedly<br /> * Avoid prolonged exposure to ABS fumes<br /> <br /> 4. Damage to machine<br /> * Fragile build plate<br /> * Jammed filament<br /> <br /> 5. General<br /> * Use the correct filament (2.85mm)<br /> * Filament storage and feed system<br /> * Switch off when finished<br /> * Leave levelling to the owners but report any problems<br /> <br /> 6. PLA vs ABS<br /> * How to tell the difference<br /> * Different temperature<br /> * PLA Biodegradable<br /> * See the Wiki for tips on printing with ABS and cleaning after<br /> <br /> 7. Software / workflow<br /> * Importing<br /> * Positioning on bed<br /> * Supports<br /> * Setting quality / speed trade off<br /> * Advanced options<br /> * Exporting to SD card<br /> * Wiki for tips on Cura<br /> <br /> 8. Unload / load<br /> * Check filament for damadge, cut filament at an angle (see Wiki for problems when loading)<br /> * Attaching spool. Ensure correct direction and not tangled<br /> * Feeding (slow then fast)<br /> * Beware of wrapping round axle<br /> * Setting material in menu<br /> * Adjusting parameters, e.g. ABS plate temperature<br /> <br /> 9. Printing<br /> * Preheating<br /> * Fence printing<br /> * Keep an eye on progress, locally or with camera<br /> * If leaving unattended, put a post-it (or badger) with your contact details<br /> * Use only plastic implements for part removal<br /> <br /> 10. Other stuff<br /> * Demonstrate atomic method of cleaning the nozzle to prevent feed jams<br /> * Strength characteristics – orientation is important<br /> * '''Paying'''<br /> <br /> '''Individual Training Task'''<br /> <br /> Task<br /> * Should demonstrate import, setup, position and run<br /> * Choose a part that takes about 10 mins to print (preloaded on PC)<br /> <br /> Steps<br /> * Set individual to work, don't prompt but do answer questions (or pose if needed)<br /> * Talk through design once done, question/check things etc<br /> * Proceed to printing (watch carefully all steps)<br /> <br /> Assuming all ok:<br /> * Get them to read the health and safety notes about operation and materials<br /> * Highlight the wiki for more information and owners email address on poster<br /> * Add to the trained member list<br /> <br /> '''Project Oversight'''<br /> <br /> For next 2-3 projects, recommend member will find another more experienced trained user to support them (second pair of eyes)<br /> <br /> '''Record Training On Wiki'''<br /> <br /> <br /> == Please write your name clearly below ==<br /> <br /> * The trainer will add you to the Trained Users page on the Wiki but can't do that if they are unable to read your name.<br /> * Please remember to check the Wiki for tips and updates on using the Ultimaker.<br /> <br /> Date of training:<br /> <br /> == Trained Users ==<br /> <br /> The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):<br /> <br /> * Paul Osborn (Rob Voisey, 2015-07-30)<br /> * Julius Schmidt (Rob Voisey, 2015-07-30)<br /> * Peter Knight (Rob Voisey, 2015-07-30)<br /> * Adam Mulligan (Rob Voisey, 2015-07-30)<br /> * Charlotte Harvey (Rob Voisey, 2015-07-30)<br /> * Alex Gee (Rob Voisey, 2015-07-30)<br /> * Albert Santos (Rob Voisey, 2015-07-30)<br /> * Zizwani Mhango (Rob Voisey, 2015-07-30)<br /> * Christie Nel (Rob Voisey, 2015-07-30)<br /> * Robert Karpinski (Rob Voisey, 2015-07-30)<br /> * Alexis Mather (Stephen Harrison, 2015-08-03)<br /> * Ben Wheatley (Stephen Harrison, 2015-08-03)<br /> * Stevan Wing (Stephen Harrison, 2015-08-03)<br /> * Jae Tumer (Stephen Harrison, 2015-08-03)<br /> * Jennifer Herbert (Stephen Harrison, 2015-08-03)<br /> * Frodi Jones (Stephen Harrison, 2015-08-03)<br /> * Matt Wayland (Stephen Harrison, 2015-08-03)<br /> * Marco Aite (Stephen Harrison, 2015-08-03)<br /> * Graeham Douglas (Stephen Harrison, 2015-08-03)<br /> * Robin Sterling (Stephen Harrison, 2015-08-07)<br /> * Abhi Manyu (Stephen Harrison, 2015-08-07)<br /> * Ward Hills (Stephen Harrison, 2015-08-07)<br /> * Carols A. Lugo (Stephen Harrison, 2015-08-07)<br /> * Ben Alper (Stephen Harrison, 2015-08-07)<br /> * Jon Green (Stephen Harrison, 2015-08-07)<br /> * Marcin Izo (Stephen Harrison, 2015-08-07)<br /> * Steve Upton (Rob Voisey, 2015-08-11)<br /> * Frederic Sorgeloos (Rob Voisey, 2015-08-11)<br /> * Andrew Cooke (Rob Voisey, 2015-08-11)<br /> * Ned Booker (Rob Voisey, 2015-08-11)<br /> * Daryl Stewart (Paul Edgington, 2015-08-24)<br /> * Nacho Lopez (Paul Edgington, 2015-08-24)<br /> * Ed Robertson (Paul Edgington, 2015-08-24)<br /> * Clive Beale (Paul Edgington, 2015-08-24)<br /> * Oliver Fleck (Paul Edgington, 2015-08-24)<br /> * Mark Cheverton (Rob Voisey, 2015-09-08)<br /> * Nik (Rob Voisey, 2015-09-08)<br /> * Dan Tidhar (Rob Voisey, 2015-09-08)<br /> * Tobias Wenzel (Rob Voisey, 2015-09-08)<br /> * Brian Starkey (Rob Voisey, 2015-09-08)<br /> * Jonathan Waite (Rob Voisey, 2015-09-08)<br /> * Emyr James (Rob Voisey, 2015-09-08)<br /> * Richard Hall (Rob Voisey, 2015-09-08)<br /> * Andrew Dunn (Rob Voisey, 2015-09-08)<br /> * Andrea Cipri (Paul Edgington, 2015-09-30)<br /> * John Sidinopoulos (Paul Edgington, 2015-09-30)<br /> * Stuart Barton (Paul Edgington, 2015-09-30)<br /> * Mark Calleta (Paul Edgington, 2015-09-30)<br /> * Martin Lenz (Paul Edgington, 2015-09-30)<br /> * Phill Banks (Paul Edgington, 2015-10-21)<br /> * Felix Morley (Paul Edgington, 2015-10-21)<br /> * David Jordan (Paul Edgington, 2015-10-21)<br /> * Mark Roberts (Stephen Harrison, 2015-10-23)<br /> * Jenny Molloy (Stephen Harrison, 2015-10-23)<br /> * Henry Cawley (Rob Voisey, 2015-11-18)<br /> * Bogdan Spiridom (Rob Voisey, 2015-11-18)<br /> * Jakub Sanak (Rob Voisey, 2015-11-18)<br /> * Jack Brewster (Rob Voisey, 2015-11-18)<br /> * Mayke Santos (Rob Voisey, 2015-11-18)<br /> * Luis Veiga Pumar (Stephen Harrison, 2015-11-24)<br /> * Greg Matthews (Stephen Harrison, 2015-11-24)<br /> * Brian Corteil (Stephen Harrison, 2015-11-24)<br /> * Rob Rescorla (Stephen Harrison, 2015-11-24)<br /> * Leo Rones (Stephen Harrison, 2015-11-24)<br /> * Diana Probst (Stephen Harrison, 2015-11-25)<br /> * Adrian van den Heever (Stephen Harrison, 2015-11-25)<br /> * Al Napp (Stephen Harrison, 2015-11-25)<br /> * Katy Marshall (Stephen Harrison, 2015-12-01)<br /> * Peter Mottram (Stephen Harrison, 2015-12-01)<br /> * David Barham (Stephen Harrison, 2015-12-01)<br /> * Johan Henriksson­ (Stephen Harrison, 2015-12-01)<br /> * Fotis Fotiadis (Stephen Harrison, 2015-12-01)<br /> * Oliver Martin (Stephen Harrison, 2015-12-01)<br /> * Andrew Drummond (Stephen Harrison, 2015-12-01)<br /> * Spencer Dixon (Stephen Harrison, 2015-12-01)<br /> * Jonathan Woolf (Rob Voisey, 2016-01-07)<br /> * Daniel Bailey (Rob Voisey, 2016-01-07)<br /> * David Haines (Rob Voisey, 2016-01-07)<br /> * Giovanni Bisutii (Rob Voisey, 2016-01-07)<br /> * Simon Hartley (Daniel Bailey, 2016-02-11)<br /> * Francois Eve (Daniel Bailey, 2016-02-11)<br /> * Giovanni Orlando (Daniel Bailey, 2016-02-11)<br /> * Dan Tidhar (Daniel Bailey, 2016-02-11)<br /> * Shunsuke Fujibayash­i (Daniel Bailey, 2016-03-04)<br /> * Ronny Schlutter (Daniel Bailey, 2016-03-04)<br /> * Jamie Powell (Daniel Bailey, 2016-03-04)<br /> * Mark Wainwright (Daniel Bailey, 2016-03-04)<br /> * Charna Hume (Daniel Bailey, 2016-03-04)<br /> * Charlotte Godley (Daniel Bailey, 2016-03-04)<br /> * Jose Chitty (Stephen Harrison, 2016-03-22)<br /> * Mat Greenwood (Stephen Harrison, 2016-03-22)<br /> * David Fisher (Stephen Harrison, 2016-03-22)<br /> * Tom Kelly (Stephen Harrison, 2016-03-22)<br /> * David Bebb (Stephen Harrison, 2016-04-12)<br /> * David Taylor (Stephen Harrison, 2016-04-12)<br /> * Jo Brook (Stephen Harrison, 2016-04-12)<br /> * Craig Easton (Daniel Bailey, 2016-04-20)<br /> * James Griffiths (Daniel Bailey, 2016-04-20)<br /> * Paul Routley (Daniel Bailey, 2016-04-20)<br /> * Steve Murphy (Daniel Bailey, 2016-04-20)<br /> * Cong Cong Bo (Daniel Bailey, 2016-06-24)<br /> * Adrien Leger (Daniel Bailey, 2016-06-24)<br /> * David Marcus (Daniel Bailey, 2016-06-24)<br /> * Mik Lamming (Stephen Harrison, 2016-07-06)<br /> * Rob MacAulay (Stephen Harrison, 2016-07-06)<br /> * Daniel Farrant (Stephen Harrison, 2016-07-06)<br /> * Steve Carey (Stephen Harrison, 2016-07-06)<br /> * Debora Rodriguez (Daniel Bailey, 2016-07-30)<br /> * David Horsnell (Daniel Bailey, 2016-07-30)<br /> * Cat Fitzpatrick (Daniel Bailey, 2016-08-12)<br /> * Hsingling Lian (Daniel Bailey, 2016-08-12)<br /> * Jeremy Bentham (Daniel Bailey, 2016-08-12)<br /> * Nadia Bassiri (Daniel Bailey, 2016-08-12)<br /> * Thomas Wanger (Daniel Bailey, 2016-08-12)<br /> * Migual Morin (Stephen Harrison, 2016-09-23)<br /> * Eric Jones (Stephen Harrison, 2016-09-23)<br /> * Will Nock (Stephen Harrison, 2016-09-23)<br /> * Mihai Truta (Stephen Harrison, 2016-09-23)<br /> * Grawham Douglas (Stephen Harrison, 2016-09-23)<br /> * Hedley Simons (Stephen Harrison, 2016-10-20)<br /> * Ravan Keerthi (Stephen Harrison, 2016-10-20)<br /> * Richard Hosking (Stephen Harrison, 2016-11-14)<br /> * Zuke Heavens (Stephen Harrison, 2016-11-14)<br /> * Volker Eckert (Stephen Harrison, 2016-11-14)<br /> * Tian Huang (Stephen Harrison, 2016-11-14)<br /> * Craig Richardson (Stephen Harrison, 2016-11-14)<br /> * Charlie Stokes (Stephen Harrison, 2016-11-23)<br /> * Ben Brebner (Stephen Harrison, 2016-11-23)<br /> * Thomas Kopsch (Stephen Harrison, 2016-11-23)<br /> * Mateusz Kosturek (Stephen Harrison, 2016-11-23)<br /> * Alex Bate (Stephen Harrison, 2016-11-30)<br /> * Martha Levine (Stephen Harrison, 2016-11-30)<br /> * John Perdue (Stephen Harrison, 2016-11-30)<br /> * Carlos Pereira Atencio (Stephen Harrison, 2016-11-30)<br /> * Francisco Pelligar (Stephen Harrison, 2016-12-05)<br /> * Rick Smith (Stephen Harrison, 2016-12-05)<br /> * Mark Chapman (Stephen Harrison, 2016-12-05)<br /> * Peter Spencer (Stephen Harrison, 2016-12-05)<br /> * Josh Kaggie (Stephen Harrison, 2016-12-11)<br /> * Ian Spolton (Stephen Harrison, 2016-12-11)<br /> * Angela Birlea (Stephen Harrison, 2017-02-09)<br /> * Scott Cunliffe (Stephen Harrison, 2017-02-09)<br /> * Boyuan Xiao (Stephen Harrison, 2017-02-09)<br /> * Peter Molnar (Stephen Harrison, 2017-02-20)<br /> * Andy Clark (Stephen Harrison, 2017-02-09)<br /> * Nikolay Pchelintsev (Stephen Harrison, 2017-02-09)<br /> * Tim Rowsful (Stephen Harrison, 2017-03-02)<br /> * Joe Escott (Stephen Harrison, 2017-03-02)<br /> * Dean Kos (Stephen Harrison, 2017-03-02)<br /> * Despina Devoudani (Stephen Harrison, 2017-03-21)<br /> * John Doherty (Stephen Harrison, 2017-03-21)<br /> * Peter Murray-Rust (Stephen Harrison, 2017-03-21)<br /> * Tom Oinn (Stephen Harrison, 2017-03-21)<br /> * Rob Sandford (Will Nock, 2017-03-27)<br /> * Gemma Goodfellow (Will Nock, 2017-03-27)<br /> * Tommaso Leonardi (Will Nock, 2017-03-27)<br /> * Carlos Araque (Will Nock, 2017-03-27)<br /> * James Potter (Stephen Harrison, 2017-05-10)<br /> * Ian Guebert (Stephen Harrison, 2017-05-10)<br /> * Xorge Castro (Stephen Harrison, 2017-05-10)<br /> * George Agnew (Stephen Harrison, 2017-05-10)<br /> * Tom Feather (Stephen Harrison, 2017-05-10)<br /> * Simon Marache-Francisco (Will Nock, 2017-05-17)<br /> * Hardie Pienaar (Will Nock, 2017-05-17)<br /> * Moti Tabulo (Will Nock, 2017-05-17)<br /> * Andy Fisher (Will Nock, 2017-05-17)<br /> * Marie Besnier (Katy Marshall,2017-06-06)<br /> * Graskc Van Leeuwei (Katy Marshall,2017-06-06)<br /> * Lin Zheng (Katy Marshall,2017-06-06)</div>

Kitkatmarshall