Makespace - User contributions [en]

User:Stevancw

2015-05-29T09:20:46Z

Stevancw: /* Recent Projects */

= Hello, world! =

[[File:stevancw.jpg|thumb|left|250x250px|alt=Stevan|Stevancw]]

I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease.
I'm interested in almost anything but particularly embedded electronics.

== Things I'm interested in ==

* Arduino and other embedded microcontrollers
* Raspberry Pi
* Linux
* Things that fly
* Amateur radio

== Things I would love to collaborate on ==

* any health related projects
* anything that involves a computer

== Recent Projects ==

* DHT22 and Arduino ProMini based climate station with 0.96" OLED display
* Repurpose old 15.6" laptop screen with cheap Chinese controller board and laser cut acrylic case
* Laser lane for my Brompton bike
* CNC fluid management machine for lab work
* Accelerometer sensor platform of monitoring symptoms in Parkinson's disease
* David Windestål style tricopter (with custom acetal front spacer and FR4 fibreglass frame)
* Arduino based antenna analyser for HF bands using DDS module and 50 ohm resistive bridge

<gallery mode="packed-hover" heights="180">
File:lcd_before.jpg|alt=Laptop monitor with controller|Laptop screen with DVI/VGA controller
File:Lasercut_monitor_case.jpg|alt=Old laptop screen repurposed|Laptop screen case
File:Starting climate sensor.jpg|alt=Climate Sensor with Arduino Nano|Beginning the climate sensor project
File:Tricopter.jpg|alt=Latest version of the tricopter
</gallery>

----

twitter [https://twitter.com/Stevancw]
web [http://stevancw.com]

----

File:Tricopter.jpg

2015-05-29T09:09:17Z

Stevancw: Stevancw uploaded a new version of "File:Tricopter.jpg"

Build of the RCExplorer tricopter with custom acetal landing gear, front spacer and FR4 fibreglass CNC cut frame.

File:Tricopter.jpg

2015-05-29T09:08:15Z

Stevancw: Stevancw uploaded a new version of "File:Tricopter.jpg"

Build of the RCExplorer tricopter with custom acetal landing gear, front spacer and FR4 fibreglass CNC cut frame.

File:Tricopter.jpg

2015-05-29T09:03:45Z

Stevancw: Build of the RCExplorer tricopter with custom acetal landing gear, front spacer and FR4 fibreglass CNC cut frame.

Build of the RCExplorer tricopter with custom acetal landing gear, front spacer and FR4 fibreglass CNC cut frame.

User:Stevancw

2015-05-29T08:58:22Z

Stevancw: /* Things I'm interested in */

= Hello, world! =

[[File:stevancw.jpg|thumb|left|250x250px|alt=Stevan|Stevancw]]

I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease.
I'm interested in almost anything but particularly embedded electronics.

== Things I'm interested in ==

* Arduino and other embedded microcontrollers
* Raspberry Pi
* Linux
* Things that fly
* Amateur radio

== Things I would love to collaborate on ==

* any health related projects
* anything that involves a computer

== Recent Projects ==

* DHT22 and Arduino ProMini based climate station with 0.96" OLED display
* Repurpose old 15.6" laptop screen with cheap Chinese controller board and laser cut acrylic case
* Laser lane for my Brompton bike
* CNC fluid management machine for lab work
* Accelerometer sensor platform of monitoring symptoms in Parkinson's disease
* David Windestål style tricopter (with custom acetal front spacer and FR4 fibreglass frame)
* Arduino based antenna analyser for HF bands using DDS module and 50 ohm resistive bridge

<gallery mode="packed-hover" heights="180">
File:lcd_before.jpg|alt=Laptop monitor with controller|Laptop screen with DVI/VGA controller
File:Lasercut_monitor_case.jpg|alt=Old laptop screen repurposed|Laptop screen case
File:Starting climate sensor.jpg|alt=Climate Sensor with Arduino Nano|Beginning the climate sensor project
File: Tricopter.jpg|alt=Latest version of the tricopter
</gallery>

----

twitter [https://twitter.com/Stevancw]
web [http://stevancw.com]

----

User:Stevancw

2015-05-29T08:57:46Z

Stevancw: /* Recent Projects */

= Hello, world! =

[[File:stevancw.jpg|thumb|left|250x250px|alt=Stevan|Stevancw]]

I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease.
I'm interested in almost anything but particularly embedded electronics.

== Things I'm interested in ==

* Arduino and other embedded microcontrollers
* Raspberry Pi
* Linux

== Things I would love to collaborate on ==

* any health related projects
* anything that involves a computer

== Recent Projects ==

* DHT22 and Arduino ProMini based climate station with 0.96" OLED display
* Repurpose old 15.6" laptop screen with cheap Chinese controller board and laser cut acrylic case
* Laser lane for my Brompton bike
* CNC fluid management machine for lab work
* Accelerometer sensor platform of monitoring symptoms in Parkinson's disease
* David Windestål style tricopter (with custom acetal front spacer and FR4 fibreglass frame)
* Arduino based antenna analyser for HF bands using DDS module and 50 ohm resistive bridge

<gallery mode="packed-hover" heights="180">
File:lcd_before.jpg|alt=Laptop monitor with controller|Laptop screen with DVI/VGA controller
File:Lasercut_monitor_case.jpg|alt=Old laptop screen repurposed|Laptop screen case
File:Starting climate sensor.jpg|alt=Climate Sensor with Arduino Nano|Beginning the climate sensor project
File: Tricopter.jpg|alt=Latest version of the tricopter
</gallery>

----

twitter [https://twitter.com/Stevancw]
web [http://stevancw.com]

----

Equipment/Laser Cutter/Training

2015-05-28T09:30:21Z

Stevancw:

[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training

= Laser Cutter Training =

This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.

== Booking ==

Sessions are advertised on '''http://meetup.makespace.org'''
* For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]

Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are owner/trainers of the laser cutter:
* Simon Ford
* David Barham
* Nick Johnson
* Toby Moncaster
* Martin de Selincourt
* Mat Cook
* [[User:stevancw|Stevan Wing]]

The following members of Makespace are trainers on the laser cutter:
* Brian Starkey

The following members of Makespace are owners on the laser cutter:
* Diane Probst

The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):
* Steve Upton (Simon Ford, 23/01/2013)
* Martin de Selincourt (Simon Ford, 23/01/2013)
* Oliver Jackson (Simon Ford, 23/01/2013)
* Simon Stirley (Simon Ford, 01/02/2013)
* Stephen Woolhead (Simon Ford, 01/02/2013)
* Martin Levine (Simon Ford, 01/02/2013)
* Uwe Borowski (Simon Ford, 01/02/2013)
* Peter Sewell (Simon Ford, 03/02/2013)
* Steve Loughran (Simon Ford, 03/02/2013)
* ST John (Simon Ford, 03/02/2013)
* Henry Gomersall (Simon Ford, 03/02/2013)
* Brian Corteil (Simon Ford, 05/02/2013)
* Wayne Keenan (Simon Ford, 05/02/2013)
* Andrew Dunn (Simon Ford, 05/02/2013)
* David Knell (Simon Ford, 05/02/2013)
* Tom Oinn (David Barham, 12/02/2013)
* Amir Chaudhry (David Barham, 12/02/2013)
* Anil Madhavapeddy (David Barham, 12/02/2013)
* Edward Imhagwe (David Barham, 12/02/2013)
* Michael Dales (Simon Ford, 2/03/2013)
* Laura James (Simon Ford, 2/03/2013)
* Robert Copcutt (Simon Ford, 2/03/2013)
* Phil Cowans (Simon Ford, 2/03/2013)
* Errol McMullen (Simon Ford, 9/03/2013)
* Gaye Soykok (Simon Ford, 19/03/2013)
* Mark Williamson (Simon Ford, 19/03/2013)
* Joe Tapply (Simon Ford, 19/03/2013)
* Dan Ros (Simon Ford, 19/03/2013)
* Paul Osborn (Simon Ford, 27/03/2013)
* David Esteves (Simon Ford, 27/03/2013)
* Zé Pinto Ferreira (Simon Ford, 27/03/2013)
* Sharath (Simon Ford, 27/03/2013)
* Andy Jude (Simon Ford, 5/04/2013)
* Mark Mellors (Simon Ford, 5/04/2013)
* Chris Abri (Simon Ford, 5/04/2013)
* Tom Ingham (Simon Ford, 5/04/2013)
* Adrian van den Heever (David Barham, 11/04/2013)
* Chris Voth (David Barham, 11/04/2013)
* Archie Reid (David Barham, 11/04/2013)
* Rachel Rayns (David Barham, 11/04/2013)
* Giovanni Orlando (David Barham, 15/04/2013)
* Chunhe Yu (Nicholas Johnson, 04/04/2013)
* Marko Cosic (Nicholas Johnson, 04/04/2013)
* Mark Watson (Nicholas Johnson, 04/04/2013)
* Andy Fisher (Nicholas Johnson, 02/05/2013)
* David Bebb (Nicholas Johnson, 02/05/2013)
* Simon Haydn (Nicholas Johnson, 02/05/2013)
* Adrian Carr (Nicholas Johnson, 02/05/2013)
* John Clamp (Nicholas Johnson, 10/05/2013)
* Maciek Piatek (Nicholas Johnson, 10/05/2013)
* Antonio Barragan (Nicholas Johnson, 10/05/2013)
* John Sturdy (Nicholas Johnson, 10/05/2013)
* Roeland Schumacher (Nicholas Johnson, 10/05/2013)
* Mark Tillotson (Nicholas Johnson, 10/05/2013)
* Ward Hills (Nicholas Johnson, 10/05/2013)
* Anne Harrison (Nicholas Johnson, 17/05/2013)
* William Morton (Nicholas Johnson, 17/05/2013)
* Ali (Nicholas Johnson, 17/05/2013)
* Rod Williams (Nicholas Johnson, 17/05/2013)
* Toby Moncaster (Simon Ford, 30/5/2013)
* Damien Guihen (David Barham, 08/06/2013)
* Ben Evan (David Barham, 08/06/2013)
* Jake Young (David Barham, 08/06/2013)
* Shareef Jalloq (David Barham, 08/06/2013)
* Renee Chow (David Barham, 08/06/2013)
* Dan Tidhar, (David Barham, 24/6/2013)
* Mat Cook, (David Barham, 24/6/2013)
* Toby Roberts (David Barham, 24/6/2013)
* Jonathan Austin (David Barham, 24/6/2013)
* Stacy Smith (David Barham, 13/8/2013)
* Matt Harvey (David Barham, 13/8/2013)
* Marcin (David Barham, 13/8/2013)
* James Waldmeyer (David Barham, 18/9/2013)
* Chris Wilson (David Barham, 18/9/2013)
* Kevin Maloney (David Barham, 18/9/2013)
* Harry Braviner (David Barham, 18/9/2013)
* Lee (David Barham, 18/9/2013)
* Jon Aas (Toby Moncaster, 24/9/2013)
* Armando Carlone (Toby Moncaster, 24/9/2013)
* Eckart Jack (Toby Moncaster, 24/9/2013)
* Pop Sharma (Toby Moncaster, 24/9/2013)
* Anthony Wainman (Toby Moncaster, 13/10/13)
* Hazel Jenkins (Toby Moncaster, 13/10/13)
* James Hutton (Toby Moncaster, 13/10/13)
* Jia Wei Lim (Toby Moncaster, 13/10/13)
* Julius Schmidt (Toby Moncaster, 13/10/13)
* Riccardo Gherardi (Toby Moncaster, 23/10/13)
* Anna Stoilova (Toby Moncaster, 23/10/13)
* Glyn Knowles (Toby Moncaster, 23/10/13)
* James Cooke (Toby Moncaster, 23/10/13)
* Jennifer Herbert (Toby Moncaster, 23/10/13)
* Simon Birrell (Toby Moncaster, 23/10/13)
* Theo Sanderson (Toby Moncaster, 23/10/13)
* Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)
* John Campbell (Toby Moncaster, 30/10/13)
* Stephen Jeapes (Toby Moncaster, 30/10/13)
* Chris Stanley (Toby Moncaster, 30/10/13)
* Mat Greenwood (Toby Moncaster, 30/10/13)
* Jonathon Brookfield (Toby Moncaster, 30/10/13)
* Matt Grimes (Toby Moncaster, 30/10/13)
* Richard Fosh (Toby Moncaster, 30/10/13)
* Esther Leighton (Toby Moncaster, 30/10/13)
* Katia Dilks (Toby Moncaster, 21/11/13)
* Tim Dilks (Toby Moncaster, 21/11/13)
* Alexander MacFaden (Toby Moncaster, 21/11/13)
* Brian Starkey (Toby Moncaster, 21/11/13)
* Dave Potts (Martin de Selincourt, 4/12/13)
* Andy Spencer (Martin de Selincourt, 4/12/13)
* Jon Green (Martin de Selincourt, 4/12/13)
* Danny Garden (Martin de Selincourt, 4/12/13)
* Steve Wiseman (Martin de Selincourt, 4/12/13)
* Patrick Wollner (David Barham, 18/2/14)
* Leonardo Impett (David Barham, 18/2/14)
* Diana Probst (Brian Starkey, 19/3/14)
* Hidde-Jan Lemstra (Brian Starkey, 19/3/14)
* Francisco Cordobes (Brian Starkey, 19/3/14)
* Peter Ferguson (Mat Cook March 5 2014)
* Tim Hayward (Mat Cook March 5 2014)
* Jason White (Mat Cook March 5 2014)
* Stuart Wilson (Mat Cook March 5 2014)
* Steve Harrison (Mat Cook March 5 2014)
* Alex Atkinson (Mat Cook March 12 2014)
* Kate Aston (Mat Cook March 12 2014)
* Sheila Shepherd (Mat Cook March 12 2014)
* Rachel Bow (Mat Cook March 12 2014)
* Emyr James (Mat Cook March 12 2014)
* Peter Knight (Mat Cook March 12 2014)
* Andy Gale (Mat Cook March 26 2014)
* Owen McAree (Mat Cook March 26 2014)
* Michal Stefenow (Mat Cook March 26 2014)
* Neil Tan (Mat Cook March 26 2014)
* Vaiva Kalmkaite? (Mat Cook Apr 23 2014)
* Alberto Santos (Mat Cook Apr 23 2014)
* Sonny Siree (sp?) (Mat Cook Apr 23 2014)
* Tim Ronsell (Mat Cook Apr 23 2014)
* Rob Voisey (Mat Cook Apr 23 2014)
* Mike Hunter (Mat Cook Apr 23 2014)
* Tony Bunting (Brian Starkey 30/4/14)
* Eric Jones (Brian Starkey 30/4/14)
* Carl Phillips (Brian Starkey 30/4/14)
* Ed Ben (Brian Starkey 30/4/14)
* Toby Norman (Brian Starkey 30/4/14)
* Marco Galardini (Mat Cook May 7 2014)
* Thomas Keller (Mat Cook May 7 2014)
* Martin Lenz (Mat Cook 28 May 2014)
* David Grech (Mat Cook 28 May 2014)
* Rick Lupton (Mat Cook 28 May 2014)
* Tim Regan (Mat Cook 28 May 2014)
* Shashank Srinivasan (Mat Cook 28 May 2014)
* Al Napp (Mat Cook 4 June 2014)
* Tom Roberts (Mat Cook 4 June 2014)
* Matthew Taylor (Mat Cook 4 June 2014)
* Milosz Wasilewski (Mat Cook 4 June 2014)
* Matt Grimes (Brian Starkey 11/06/14)
* Brandon Invergo (Brian Starkey 11/06/14)
* Simon West (Brian Starkey 11/06/14)
* Kevin Rathbone (Brian Starkey 11/06/14)
* Richard Gordon (Brian Starkey 11/06/14)
* Rob Yates (Brian Starkey 12/07/14)
* Alex Gee (Brian Starkey 12/07/14)
* Patrick Beigent (Brian Starkey 12/07/14)
* Guilliame Tucker (Brian Starkey 12/07/14)
* Jo Brook (Brian Starkey 12/07/14)
* David Taylor (Brian Starkey 12/07/14)
* Joe Watson (Brian Starkey 23/07/14)
* Richard Armstrong (Brian Starkey 23/07/14)
* Eric Gowland (Brian Starkey 23/07/14)
* Paul Holland (Brian Starkey 23/07/14)
* Craig Richardson (Brian Starkey 23/07/14)
* Stevan Wing (Mat Cook 11/08/2014)
* John Sidiropoulos (Mat Cook 11/08/2014)
* Greaham Douglas (Stevan Wing 17/09/2014)
* Joseph Gamble (Stevan Wing 17/09/2014)
* Robert Fryers (Stevan Wing 17/09/2014)
* Will Hartley (Stevan Wing 17/09/2014)
* Alistair Turnbull (Stevan Wing 24/09/2014)
* Tim Ramsdale (Stevan Wing 24/09/2014)
* Hugo Van Sansen (Stevan Wing 24/09/2014)
* Marco Aita (David Barham 08/10/2014)
* Rob Shore (David Barham 08/10/2014)
* Katy Marshall (David Barham 08/10/2014)
* John Clarke (David Barham 08/10/2014)
* Danny Farrant (Stevan Wing 15/10/2014)
* John Ginger (Stevan Wing 15/10/2014)
* Emilo Mont (Stevan Wing 15/10/2014)
* Geoff Lunn (Stevan Wing 15/10/2014)
* Milosch Meriac (Stevan Wing 05/11/2014)
* Abhi Manyu (Stevan Wing 05/11/2014)
* Alba Rodriguez (Stevan Wing 05/11/2014)
* Stephen Paulger (Stevan Wing 05/11/2014)
* Erik Pickering (Stevan Wing 05/11/2014)
* Rob Meadows (Stevan Wing 03/12/2014)
* Chris Mayhurst (Stevan Wing 03/12/2014)
* Giovanni Orlando (Stevan Wing 03/12/2014)
* Chris Padbury (Stevan Wing 03/12/2014)
* Robin Sterling (Stevan Wing 03/12/2014)
* Kristien De Clercq (Stevan Wing 03/12/2014)
* "Nevindep" (Mat Cook 11 Dec 2014)
* Jae Turner (Mat Cook 11 Dec 2014)
* Luke Twydell (Mat Cook 11 Dec 2014)
* Steph Tyszka (Mat Cook 20 Dec 2014)
* Jonny Waite (Brian Starkey 3/9/14)
* Toby Jaffey (Brian Starkey 3/9/14)
* Greg Matthews (Brian Starkey 3/9/14)
* Tom Parker (Brian Starkey 12/11/14)
* Ben Weeks (Brian Starkey 12/11/14)
* Clara Todd (Brian Starkey 17/12/14)
* Ian Mc (Brian Starkey 17/12/14)
* Timothy Baldock (Brian Starkey 17/12/14)
* Rob Rescrola (Brian Starkey 7/1/15)
* Tariq Harris (Brian Starkey 7/1/15)
* Ed Robertson (Brian Starkey 7/1/15)
* Imogen Ford (Brian Starkey 7/1/15)
* Dan Tidhar (Brian Starkey 7/1/15)
* Alex Judd (Martin de Selincourt 11/02/2015)
* Adam Mulligan (Martin de Selincourt 11/02/2015)
* Adam Nightingale (Martin de Selincourt 11/02/2015)
* Charlotte Harvey (Martin de Selincourt 11/02/2015)
* Matt Wayland (Martin de Selincourt 11/02/2015)
* Andrei R. (Martin de Selincourt 11/02/2015)
* John Mead (Martin de Selincourt 11/02/2015)

= More trained users =

Fully trained:
* Hugo Keene (Mat Cook 31 Mar 2015)
* Antony Congedo (Mat Cook 31 Mar 2015)
* Alina Velea (Mat Cook 31 Mat 2015)
* Adam Reig (Stevan Wing 27/0515)
* Nicola Westgarth-Flynn (Stevan Wing 27/0515)
* Dave Jordan (Stevan Wing 27/0515)
* Khameinei Ali (Stevan Wing 27/0515)
* Fotis Georgatos (Stevan Wing 27/0515)
* Tianheng Zhao (Stevan Wing 27/0515)

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Laser
* Cutting Mechanics
* Water Cooler System
* Filter
* PC
* Materials (what it can cut, supply)

Checks for everyone to do
* Check in use, looks ok
* Check water bath, temperature

Powering Up
* Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)
* Turning on Laser and warmup, what to do if doesn't power up
* Turning on PC and starting software

LaserCut Project walkthrough (using M+S+text keyring example)
* Package function, drawing, import file types
* Bed dimensions
* Paths, yellow dots, 'united' shapes
* Blue dot, Immediate mode
* Layers and colours
* Through cut, surface cut and engraving, speeds and strengths
* Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)
* Job ordering
* Saving
* Download as immediate, delete, download current

Laser Operation
* Lid
* Control panel, escape
* Moving head XY, indicator laser, datum
* Moving Z
* Focus
* Start position and test
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Laser Hazards
* Process and progression for normal operation failure (fire) - pause, open, move, CO2
* Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2
* Ensure confident of process

Power Down
* Switch off laser
* Switch off filtration
* Clean any residue from the bed or bottom tray
* Close lid

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make a personalised focus tool
* Square acrylic of appropriate size
* Member's name, "Focus Tool", keychain hole
* Should use full cut, surface cut, engrave
* Should demonstrate all steps, size, appropriate ordering, positioning

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to lasering (watch carefully all steps)
* Ask to stop job/restart, question escalation process

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/Laser Cutter/Training

2014-12-04T10:06:01Z

Stevancw: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training

= Laser Cutter Training =

This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.

== Booking ==

Sessions are advertised on '''http://meetup.makespace.org'''
* For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]

Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are owner/trainers of the laser cutter:
* Simon Ford
* David Barham
* Nick Johnson
* Toby Moncaster
* Martin de Selincourt
* Mat Cook
* [[User:stevancw|Stevan Wing]]

The following members of Makespace are trainers on the laser cutter:
* Brian Starkey

The following members of Makespace are owners on the laser cutter:
* Diane Probst

The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):
* Steve Upton (Simon Ford, 23/01/2013)
* Martin de Selincourt (Simon Ford, 23/01/2013)
* Oliver Jackson (Simon Ford, 23/01/2013)
* Simon Stirley (Simon Ford, 01/02/2013)
* Stephen Woolhead (Simon Ford, 01/02/2013)
* Martin Levine (Simon Ford, 01/02/2013)
* Uwe Borowski (Simon Ford, 01/02/2013)
* Peter Sewell (Simon Ford, 03/02/2013)
* Steve Loughran (Simon Ford, 03/02/2013)
* ST John (Simon Ford, 03/02/2013)
* Henry Gomersall (Simon Ford, 03/02/2013)
* Brian Corteil (Simon Ford, 05/02/2013)
* Wayne Keenan (Simon Ford, 05/02/2013)
* Andrew Dunn (Simon Ford, 05/02/2013)
* David Knell (Simon Ford, 05/02/2013)
* Tom Oinn (David Barham, 12/02/2013)
* Amir Chaudhry (David Barham, 12/02/2013)
* Anil Madhavapeddy (David Barham, 12/02/2013)
* Edward Imhagwe (David Barham, 12/02/2013)
* Michael Dales (Simon Ford, 2/03/2013)
* Laura James (Simon Ford, 2/03/2013)
* Robert Copcutt (Simon Ford, 2/03/2013)
* Phil Cowans (Simon Ford, 2/03/2013)
* Errol McMullen (Simon Ford, 9/03/2013)
* Gaye Soykok (Simon Ford, 19/03/2013)
* Mark Williamson (Simon Ford, 19/03/2013)
* Joe Tapply (Simon Ford, 19/03/2013)
* Dan Ros (Simon Ford, 19/03/2013)
* Paul Osborn (Simon Ford, 27/03/2013)
* David Esteves (Simon Ford, 27/03/2013)
* Zé Pinto Ferreira (Simon Ford, 27/03/2013)
* Sharath (Simon Ford, 27/03/2013)
* Andy Jude (Simon Ford, 5/04/2013)
* Mark Mellors (Simon Ford, 5/04/2013)
* Chris Abri (Simon Ford, 5/04/2013)
* Tom Ingham (Simon Ford, 5/04/2013)
* Adrian van den Heever (David Barham, 11/04/2013)
* Chris Voth (David Barham, 11/04/2013)
* Archie Reid (David Barham, 11/04/2013)
* Rachel Rayns (David Barham, 11/04/2013)
* Giovanni Orlando (David Barham, 15/04/2013)
* Chunhe Yu (Nicholas Johnson, 04/04/2013)
* Marko Cosic (Nicholas Johnson, 04/04/2013)
* Mark Watson (Nicholas Johnson, 04/04/2013)
* Andy Fisher (Nicholas Johnson, 02/05/2013)
* David Bebb (Nicholas Johnson, 02/05/2013)
* Simon Haydn (Nicholas Johnson, 02/05/2013)
* Adrian Carr (Nicholas Johnson, 02/05/2013)
* John Clamp (Nicholas Johnson, 10/05/2013)
* Maciek Piatek (Nicholas Johnson, 10/05/2013)
* Antonio Barragan (Nicholas Johnson, 10/05/2013)
* John Sturdy (Nicholas Johnson, 10/05/2013)
* Roeland Schumacher (Nicholas Johnson, 10/05/2013)
* Mark Tillotson (Nicholas Johnson, 10/05/2013)
* Ward Hills (Nicholas Johnson, 10/05/2013)
* Anne Harrison (Nicholas Johnson, 17/05/2013)
* William Morton (Nicholas Johnson, 17/05/2013)
* Ali (Nicholas Johnson, 17/05/2013)
* Rod Williams (Nicholas Johnson, 17/05/2013)
* Toby Moncaster (Simon Ford, 30/5/2013)
* Damien Guihen (David Barham, 08/06/2013)
* Ben Evan (David Barham, 08/06/2013)
* Jake Young (David Barham, 08/06/2013)
* Shareef Jalloq (David Barham, 08/06/2013)
* Renee Chow (David Barham, 08/06/2013)
* Dan Tidhar, (David Barham, 24/6/2013)
* Mat Cook, (David Barham, 24/6/2013)
* Toby Roberts (David Barham, 24/6/2013)
* Jonathan Austin (David Barham, 24/6/2013)
* Stacy Smith (David Barham, 13/8/2013)
* Matt Harvey (David Barham, 13/8/2013)
* Marcin (David Barham, 13/8/2013)
* James Waldmeyer (David Barham, 18/9/2013)
* Chris Wilson (David Barham, 18/9/2013)
* Kevin Maloney (David Barham, 18/9/2013)
* Harry Braviner (David Barham, 18/9/2013)
* Lee (David Barham, 18/9/2013)
* Jon Aas (Toby Moncaster, 24/9/2013)
* Armando Carlone (Toby Moncaster, 24/9/2013)
* Eckart Jack (Toby Moncaster, 24/9/2013)
* Pop Sharma (Toby Moncaster, 24/9/2013)
* Anthony Wainman (Toby Moncaster, 13/10/13)
* Hazel Jenkins (Toby Moncaster, 13/10/13)
* James Hutton (Toby Moncaster, 13/10/13)
* Jia Wei Lim (Toby Moncaster, 13/10/13)
* Julius Schmidt (Toby Moncaster, 13/10/13)
* Riccardo Gherardi (Toby Moncaster, 23/10/13)
* Anna Stoilova (Toby Moncaster, 23/10/13)
* Glyn Knowles (Toby Moncaster, 23/10/13)
* James Cooke (Toby Moncaster, 23/10/13)
* Jennifer Herbert (Toby Moncaster, 23/10/13)
* Simon Birrell (Toby Moncaster, 23/10/13)
* Theo Sanderson (Toby Moncaster, 23/10/13)
* Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)
* John Campbell (Toby Moncaster, 30/10/13)
* Stephen Jeapes (Toby Moncaster, 30/10/13)
* Chris Stanley (Toby Moncaster, 30/10/13)
* Mat Greenwood (Toby Moncaster, 30/10/13)
* Jonathon Brookfield (Toby Moncaster, 30/10/13)
* Matt Grimes (Toby Moncaster, 30/10/13)
* Richard Fosh (Toby Moncaster, 30/10/13)
* Esther Leighton (Toby Moncaster, 30/10/13)
* Katia Dilks (Toby Moncaster, 21/11/13)
* Tim Dilks (Toby Moncaster, 21/11/13)
* Alexander MacFaden (Toby Moncaster, 21/11/13)
* Brian Starkey (Toby Moncaster, 21/11/13)
* Dave Potts (Martin de Selincourt, 4/12/13)
* Andy Spencer (Martin de Selincourt, 4/12/13)
* Jon Green (Martin de Selincourt, 4/12/13)
* Danny Garden (Martin de Selincourt, 4/12/13)
* Steve Wiseman (Martin de Selincourt, 4/12/13)
* Patrick Wollner (David Barham, 18/2/14)
* Leonardo Impett (David Barham, 18/2/14)
* Diana Probst (Brian Starkey, 19/3/14)
* Hidde-Jan Lemstra (Brian Starkey, 19/3/14)
* Francisco Cordobes (Brian Starkey, 19/3/14)
* Peter Ferguson (Mat Cook March 5 2014)
* Tim Hayward (Mat Cook March 5 2014)
* Jason White (Mat Cook March 5 2014)
* Stuart Wilson (Mat Cook March 5 2014)
* Steve Harrison (Mat Cook March 5 2014)
* Alex Atkinson (Mat Cook March 12 2014)
* Kate Aston (Mat Cook March 12 2014)
* Sheila Shepherd (Mat Cook March 12 2014)
* Rachel Bow (Mat Cook March 12 2014)
* Emyr James (Mat Cook March 12 2014)
* Peter Knight (Mat Cook March 12 2014)
* Andy Gale (Mat Cook March 26 2014)
* Owen McAree (Mat Cook March 26 2014)
* Michal Stefenow (Mat Cook March 26 2014)
* Neil Tan (Mat Cook March 26 2014)
* Vaiva Kalmkaite? (Mat Cook Apr 23 2014)
* Alberto Santos (Mat Cook Apr 23 2014)
* Sonny Siree (sp?) (Mat Cook Apr 23 2014)
* Tim Ronsell (Mat Cook Apr 23 2014)
* Rob Voisey (Mat Cook Apr 23 2014)
* Mike Hunter (Mat Cook Apr 23 2014)
* Tony Bunting (Brian Starkey 30/4/14)
* Eric Jones (Brian Starkey 30/4/14)
* Carl Phillips (Brian Starkey 30/4/14)
* Ed Ben (Brian Starkey 30/4/14)
* Toby Norman (Brian Starkey 30/4/14)
* Marco Galardini (Mat Cook May 7 2014)
* Thomas Keller (Mat Cook May 7 2014)
* Martin Lenz (Mat Cook 28 May 2014)
* David Grech (Mat Cook 28 May 2014)
* Rick Lupton (Mat Cook 28 May 2014)
* Tim Regan (Mat Cook 28 May 2014)
* Shashank Srinivasan (Mat Cook 28 May 2014)
* Al Napp (Mat Cook 4 June 2014)
* Tom Roberts (Mat Cook 4 June 2014)
* Matthew Taylor (Mat Cook 4 June 2014)
* Milosz Wasilewski (Mat Cook 4 June 2014)
* Matt Grimes (Brian Starkey 11/06/14)
* Brandon Invergo (Brian Starkey 11/06/14)
* Simon West (Brian Starkey 11/06/14)
* Kevin Rathbone (Brian Starkey 11/06/14)
* Richard Gordon (Brian Starkey 11/06/14)
* Rob Yates (Brian Starkey 12/07/14)
* Alex Gee (Brian Starkey 12/07/14)
* Patrick Beigent (Brian Starkey 12/07/14)
* Guilliame Tucker (Brian Starkey 12/07/14)
* Jo Brook (Brian Starkey 12/07/14)
* David Taylor (Brian Starkey 12/07/14)
* Joe Watson (Brian Starkey 23/07/14)
* Richard Armstrong (Brian Starkey 23/07/14)
* Eric Gowland (Brian Starkey 23/07/14)
* Paul Holland (Brian Starkey 23/07/14)
* Craig Richardson (Brian Starkey 23/07/14)
* Stevan Wing (Mat Cook 11/08/2014)
* Greaham Douglas (Stevan Wing 17/09/2014)
* Joseph Gamble (Stevan Wing 17/09/2014)
* Robert Fryers (Stevan Wing 17/09/2014)
* Will Hartley (Stevan Wing 17/09/2014)
* Alistair Turnbull (Stevan Wing 24/09/2014)
* Tim Ramsdale (Stevan Wing 24/09/2014)
* Hugo Van Sansen (Stevan Wing 24/09/2014)
* Marco Aita (David Barham 08/10/2014)
* Rob Shore (David Barham 08/10/2014)
* Katy Marshall (David Barham 08/10/2014)
* John Clarke (David Barham 08/10/2014)
* Danny Farrant (Stevan Wing 15/10/2014)
* John Ginger (Stevan Wing 15/10/2014)
* Emilo Mont (Stevan Wing 15/10/2014)
* Geoff Lunn (Stevan Wing 15/10/2014)
* Milosch Meriac (Stevan Wing 05/11/2014)
* Abhi Manyu (Stevan Wing 05/11/2014)
* Alba Rodriguez (Stevan Wing 05/11/2014)
* Stephen Paulger (Stevan Wing 05/11/2014)
* Erik Pickering (Stevan Wing 05/11/2014)
* Rob Meadows (Stevan Wing 03/12/2014)
* Chris Mayhurst (Stevan Wing 03/12/2014)
* Giovanni Orlando (Stevan Wing 03/12/2014)
* Chris Padbury (Stevan Wing 03/12/2014)
* Robin Sterling (Stevan Wing 03/12/2014)
* Kristien De Clercq (Stevan Wing 03/12/2014)

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Laser
* Cutting Mechanics
* Water Cooler System
* Filter
* PC
* Materials (what it can cut, supply)

Checks for everyone to do
* Check in use, looks ok
* Check water bath, temperature

Powering Up
* Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)
* Turning on Laser and warmup, what to do if doesn't power up
* Turning on PC and starting software

LaserCut Project walkthrough (using M+S+text keyring example)
* Package function, drawing, import file types
* Bed dimensions
* Paths, yellow dots, 'united' shapes
* Blue dot, Immediate mode
* Layers and colours
* Through cut, surface cut and engraving, speeds and strengths
* Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)
* Job ordering
* Saving
* Download as immediate, delete, download current

Laser Operation
* Lid
* Control panel, escape
* Moving head XY, indicator laser, datum
* Moving Z
* Focus
* Start position and test
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Laser Hazards
* Process and progression for normal operation failure (fire) - pause, open, move, CO2
* Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2
* Ensure confident of process

Power Down
* Switch off laser
* Switch off filtration
* Clean any residue from the bed or bottom tray
* Close lid

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make a personalised focus tool
* Square acrylic of appropriate size
* Member's name, "Focus Tool", keychain hole
* Should use full cut, surface cut, engrave
* Should demonstrate all steps, size, appropriate ordering, positioning

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to lasering (watch carefully all steps)
* Ask to stop job/restart, question escalation process

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/Laser Cutter/Training

2014-11-05T21:17:45Z

Stevancw: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training

= Laser Cutter Training =

This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.

== Booking ==

Sessions are advertised on '''http://meetup.makespace.org'''
* For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]

Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are owner/trainers of the laser cutter:
* Simon Ford
* David Barham
* Nick Johnson
* Toby Moncaster
* Martin de Selincourt
* Mat Cook
* [[User:stevancw|Stevan Wing]]

The following members of Makespace are trainers on the laser cutter:
* Brian Starkey

The following members of Makespace are owners on the laser cutter:
* Diane Probst

The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):
* Steve Upton (Simon Ford, 23/01/2013)
* Martin de Selincourt (Simon Ford, 23/01/2013)
* Oliver Jackson (Simon Ford, 23/01/2013)
* Simon Stirley (Simon Ford, 01/02/2013)
* Stephen Woolhead (Simon Ford, 01/02/2013)
* Martin Levine (Simon Ford, 01/02/2013)
* Uwe Borowski (Simon Ford, 01/02/2013)
* Peter Sewell (Simon Ford, 03/02/2013)
* Steve Loughran (Simon Ford, 03/02/2013)
* ST John (Simon Ford, 03/02/2013)
* Henry Gomersall (Simon Ford, 03/02/2013)
* Brian Corteil (Simon Ford, 05/02/2013)
* Wayne Keenan (Simon Ford, 05/02/2013)
* Andrew Dunn (Simon Ford, 05/02/2013)
* David Knell (Simon Ford, 05/02/2013)
* Tom Oinn (David Barham, 12/02/2013)
* Amir Chaudhry (David Barham, 12/02/2013)
* Anil Madhavapeddy (David Barham, 12/02/2013)
* Edward Imhagwe (David Barham, 12/02/2013)
* Michael Dales (Simon Ford, 2/03/2013)
* Laura James (Simon Ford, 2/03/2013)
* Robert Copcutt (Simon Ford, 2/03/2013)
* Phil Cowans (Simon Ford, 2/03/2013)
* Errol McMullen (Simon Ford, 9/03/2013)
* Gaye Soykok (Simon Ford, 19/03/2013)
* Mark Williamson (Simon Ford, 19/03/2013)
* Joe Tapply (Simon Ford, 19/03/2013)
* Dan Ros (Simon Ford, 19/03/2013)
* Paul Osborn (Simon Ford, 27/03/2013)
* David Esteves (Simon Ford, 27/03/2013)
* Zé Pinto Ferreira (Simon Ford, 27/03/2013)
* Sharath (Simon Ford, 27/03/2013)
* Andy Jude (Simon Ford, 5/04/2013)
* Mark Mellors (Simon Ford, 5/04/2013)
* Chris Abri (Simon Ford, 5/04/2013)
* Tom Ingham (Simon Ford, 5/04/2013)
* Adrian van den Heever (David Barham, 11/04/2013)
* Chris Voth (David Barham, 11/04/2013)
* Archie Reid (David Barham, 11/04/2013)
* Rachel Rayns (David Barham, 11/04/2013)
* Giovanni Orlando (David Barham, 15/04/2013)
* Chunhe Yu (Nicholas Johnson, 04/04/2013)
* Marko Cosic (Nicholas Johnson, 04/04/2013)
* Mark Watson (Nicholas Johnson, 04/04/2013)
* Andy Fisher (Nicholas Johnson, 02/05/2013)
* David Bebb (Nicholas Johnson, 02/05/2013)
* Simon Haydn (Nicholas Johnson, 02/05/2013)
* Adrian Carr (Nicholas Johnson, 02/05/2013)
* John Clamp (Nicholas Johnson, 10/05/2013)
* Maciek Piatek (Nicholas Johnson, 10/05/2013)
* Antonio Barragan (Nicholas Johnson, 10/05/2013)
* John Sturdy (Nicholas Johnson, 10/05/2013)
* Roeland Schumacher (Nicholas Johnson, 10/05/2013)
* Mark Tillotson (Nicholas Johnson, 10/05/2013)
* Ward Hills (Nicholas Johnson, 10/05/2013)
* Anne Harrison (Nicholas Johnson, 17/05/2013)
* William Morton (Nicholas Johnson, 17/05/2013)
* Ali (Nicholas Johnson, 17/05/2013)
* Rod Williams (Nicholas Johnson, 17/05/2013)
* Toby Moncaster (Simon Ford, 30/5/2013)
* Damien Guihen (David Barham, 08/06/2013)
* Ben Evan (David Barham, 08/06/2013)
* Jake Young (David Barham, 08/06/2013)
* Shareef Jalloq (David Barham, 08/06/2013)
* Renee Chow (David Barham, 08/06/2013)
* Dan Tidhar, (David Barham, 24/6/2013)
* Mat Cook, (David Barham, 24/6/2013)
* Toby Roberts (David Barham, 24/6/2013)
* Jonathan Austin (David Barham, 24/6/2013)
* Stacy Smith (David Barham, 13/8/2013)
* Matt Harvey (David Barham, 13/8/2013)
* Marcin (David Barham, 13/8/2013)
* James Waldmeyer (David Barham, 18/9/2013)
* Chris Wilson (David Barham, 18/9/2013)
* Kevin Maloney (David Barham, 18/9/2013)
* Harry Braviner (David Barham, 18/9/2013)
* Lee (David Barham, 18/9/2013)
* Jon Aas (Toby Moncaster, 24/9/2013)
* Armando Carlone (Toby Moncaster, 24/9/2013)
* Eckart Jack (Toby Moncaster, 24/9/2013)
* Pop Sharma (Toby Moncaster, 24/9/2013)
* Anthony Wainman (Toby Moncaster, 13/10/13)
* Hazel Jenkins (Toby Moncaster, 13/10/13)
* James Hutton (Toby Moncaster, 13/10/13)
* Jia Wei Lim (Toby Moncaster, 13/10/13)
* Julius Schmidt (Toby Moncaster, 13/10/13)
* Riccardo Gherardi (Toby Moncaster, 23/10/13)
* Anna Stoilova (Toby Moncaster, 23/10/13)
* Glyn Knowles (Toby Moncaster, 23/10/13)
* James Cooke (Toby Moncaster, 23/10/13)
* Jennifer Herbert (Toby Moncaster, 23/10/13)
* Simon Birrell (Toby Moncaster, 23/10/13)
* Theo Sanderson (Toby Moncaster, 23/10/13)
* Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)
* John Campbell (Toby Moncaster, 30/10/13)
* Stephen Jeapes (Toby Moncaster, 30/10/13)
* Chris Stanley (Toby Moncaster, 30/10/13)
* Mat Greenwood (Toby Moncaster, 30/10/13)
* Jonathon Brookfield (Toby Moncaster, 30/10/13)
* Matt Grimes (Toby Moncaster, 30/10/13)
* Richard Fosh (Toby Moncaster, 30/10/13)
* Esther Leighton (Toby Moncaster, 30/10/13)
* Katia Dilks (Toby Moncaster, 21/11/13)
* Tim Dilks (Toby Moncaster, 21/11/13)
* Alexander MacFaden (Toby Moncaster, 21/11/13)
* Brian Starkey (Toby Moncaster, 21/11/13)
* Dave Potts (Martin de Selincourt, 4/12/13)
* Andy Spencer (Martin de Selincourt, 4/12/13)
* Jon Green (Martin de Selincourt, 4/12/13)
* Danny Garden (Martin de Selincourt, 4/12/13)
* Steve Wiseman (Martin de Selincourt, 4/12/13)
* Patrick Wollner (David Barham, 18/2/14)
* Leonardo Impett (David Barham, 18/2/14)
* Diana Probst (Brian Starkey, 19/3/14)
* Hidde-Jan Lemstra (Brian Starkey, 19/3/14)
* Francisco Cordobes (Brian Starkey, 19/3/14)
* Peter Ferguson (Mat Cook March 5 2014)
* Tim Hayward (Mat Cook March 5 2014)
* Jason White (Mat Cook March 5 2014)
* Stuart Wilson (Mat Cook March 5 2014)
* Steve Harrison (Mat Cook March 5 2014)
* Alex Atkinson (Mat Cook March 12 2014)
* Kate Aston (Mat Cook March 12 2014)
* Sheila Shepherd (Mat Cook March 12 2014)
* Rachel Bow (Mat Cook March 12 2014)
* Emyr James (Mat Cook March 12 2014)
* Peter Knight (Mat Cook March 12 2014)
* Andy Gale (Mat Cook March 26 2014)
* Owen McAree (Mat Cook March 26 2014)
* Michal Stefenow (Mat Cook March 26 2014)
* Neil Tan (Mat Cook March 26 2014)
* Vaiva Kalmkaite? (Mat Cook Apr 23 2014)
* Alberto Santos (Mat Cook Apr 23 2014)
* Sonny Siree (sp?) (Mat Cook Apr 23 2014)
* Tim Ronsell (Mat Cook Apr 23 2014)
* Rob Voisey (Mat Cook Apr 23 2014)
* Mike Hunter (Mat Cook Apr 23 2014)
* Tony Bunting (Brian Starkey 30/4/14)
* Eric Jones (Brian Starkey 30/4/14)
* Carl Phillips (Brian Starkey 30/4/14)
* Ed Ben (Brian Starkey 30/4/14)
* Toby Norman (Brian Starkey 30/4/14)
* Marco Galardini (Mat Cook May 7 2014)
* Thomas Keller (Mat Cook May 7 2014)
* Martin Lenz (Mat Cook 28 May 2014)
* David Grech (Mat Cook 28 May 2014)
* Rick Lupton (Mat Cook 28 May 2014)
* Tim Regan (Mat Cook 28 May 2014)
* Shashank Srinivasan (Mat Cook 28 May 2014)
* Al Napp (Mat Cook 4 June 2014)
* Tom Roberts (Mat Cook 4 June 2014)
* Matthew Taylor (Mat Cook 4 June 2014)
* Milosz Wasilewski (Mat Cook 4 June 2014)
* Matt Grimes (Brian Starkey 11/06/14)
* Brandon Invergo (Brian Starkey 11/06/14)
* Simon West (Brian Starkey 11/06/14)
* Kevin Rathbone (Brian Starkey 11/06/14)
* Richard Gordon (Brian Starkey 11/06/14)
* Rob Yates (Brian Starkey 12/07/14)
* Alex Gee (Brian Starkey 12/07/14)
* Patrick Beigent (Brian Starkey 12/07/14)
* Guilliame Tucker (Brian Starkey 12/07/14)
* Jo Brook (Brian Starkey 12/07/14)
* David Taylor (Brian Starkey 12/07/14)
* Joe Watson (Brian Starkey 23/07/14)
* Richard Armstrong (Brian Starkey 23/07/14)
* Eric Gowland (Brian Starkey 23/07/14)
* Paul Holland (Brian Starkey 23/07/14)
* Craig Richardson (Brian Starkey 23/07/14)
* Stevan Wing (Mat Cook 11/08/2014)
* Greaham Douglas (Stevan Wing 17/09/2014)
* Joseph Gamble (Stevan Wing 17/09/2014)
* Robert Fryers (Stevan Wing 17/09/2014)
* Will Hartley (Stevan Wing 17/09/2014)
* Alistair Turnbull (Stevan Wing 24/09/2014)
* Tim Ramsdale (Stevan Wing 24/09/2014)
* Hugo Van Sansen (Stevan Wing 24/09/2014)
* Marco Aita (David Barham 08/10/2014)
* Rob Shore (David Barham 08/10/2014)
* Katy Marshall (David Barham 08/10/2014)
* John Clarke (David Barham 08/10/2014)
* Danny Farrant (Stevan Wing 15/10/2014)
* John Ginger (Stevan Wing 15/10/2014)
* Emilo Mont (Stevan Wing 15/10/2014)
* Geoff Lunn (Stevan Wing 15/10/2014)
* Milosch Meriac (Stevan Wing 05/11/2014)
* Abhi Manyu (Stevan Wing 05/11/2014)
* Alba Rodriguez (Stevan Wing 05/11/2014)
* Stephen Paulger (Stevan Wing 05/11/2014)
* Erik Pickering (Stevan Wing 05/11/2014)

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Laser
* Cutting Mechanics
* Water Cooler System
* Filter
* PC
* Materials (what it can cut, supply)

Checks for everyone to do
* Check in use, looks ok
* Check water bath, temperature

Powering Up
* Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)
* Turning on Laser and warmup, what to do if doesn't power up
* Turning on PC and starting software

LaserCut Project walkthrough (using M+S+text keyring example)
* Package function, drawing, import file types
* Bed dimensions
* Paths, yellow dots, 'united' shapes
* Blue dot, Immediate mode
* Layers and colours
* Through cut, surface cut and engraving, speeds and strengths
* Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)
* Job ordering
* Saving
* Download as immediate, delete, download current

Laser Operation
* Lid
* Control panel, escape
* Moving head XY, indicator laser, datum
* Moving Z
* Focus
* Start position and test
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Laser Hazards
* Process and progression for normal operation failure (fire) - pause, open, move, CO2
* Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2
* Ensure confident of process

Power Down
* Switch off laser
* Switch off filtration
* Clean any residue from the bed or bottom tray
* Close lid

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make a personalised focus tool
* Square acrylic of appropriate size
* Member's name, "Focus Tool", keychain hole
* Should use full cut, surface cut, engrave
* Should demonstrate all steps, size, appropriate ordering, positioning

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to lasering (watch carefully all steps)
* Ask to stop job/restart, question escalation process

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/Laser Cutter/Training

2014-10-15T20:49:47Z

Stevancw: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training

= Laser Cutter Training =

This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.

== Booking ==

Sessions are advertised on '''http://meetup.makespace.org'''
* For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]

Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are owner/trainers of the laser cutter:
* Simon Ford
* David Barham
* Nick Johnson
* Toby Moncaster
* Martin de Selincourt
* Mat Cook
* [[User:stevancw|Stevan Wing]]

The following members of Makespace are trainers on the laser cutter:
* Brian Starkey

The following members of Makespace are owners on the laser cutter:
* Diane Probst

The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):
* Steve Upton (Simon Ford, 23/01/2013)
* Martin de Selincourt (Simon Ford, 23/01/2013)
* Oliver Jackson (Simon Ford, 23/01/2013)
* Simon Stirley (Simon Ford, 01/02/2013)
* Stephen Woolhead (Simon Ford, 01/02/2013)
* Martin Levine (Simon Ford, 01/02/2013)
* Uwe Borowski (Simon Ford, 01/02/2013)
* Peter Sewell (Simon Ford, 03/02/2013)
* Steve Loughran (Simon Ford, 03/02/2013)
* ST John (Simon Ford, 03/02/2013)
* Henry Gomersall (Simon Ford, 03/02/2013)
* Brian Corteil (Simon Ford, 05/02/2013)
* Wayne Keenan (Simon Ford, 05/02/2013)
* Andrew Dunn (Simon Ford, 05/02/2013)
* David Knell (Simon Ford, 05/02/2013)
* Tom Oinn (David Barham, 12/02/2013)
* Amir Chaudhry (David Barham, 12/02/2013)
* Anil Madhavapeddy (David Barham, 12/02/2013)
* Edward Imhagwe (David Barham, 12/02/2013)
* Michael Dales (Simon Ford, 2/03/2013)
* Laura James (Simon Ford, 2/03/2013)
* Robert Copcutt (Simon Ford, 2/03/2013)
* Phil Cowans (Simon Ford, 2/03/2013)
* Errol McMullen (Simon Ford, 9/03/2013)
* Gaye Soykok (Simon Ford, 19/03/2013)
* Mark Williamson (Simon Ford, 19/03/2013)
* Joe Tapply (Simon Ford, 19/03/2013)
* Dan Ros (Simon Ford, 19/03/2013)
* Paul Osborn (Simon Ford, 27/03/2013)
* David Esteves (Simon Ford, 27/03/2013)
* Zé Pinto Ferreira (Simon Ford, 27/03/2013)
* Sharath (Simon Ford, 27/03/2013)
* Andy Jude (Simon Ford, 5/04/2013)
* Mark Mellors (Simon Ford, 5/04/2013)
* Chris Abri (Simon Ford, 5/04/2013)
* Tom Ingham (Simon Ford, 5/04/2013)
* Adrian van den Heever (David Barham, 11/04/2013)
* Chris Voth (David Barham, 11/04/2013)
* Archie Reid (David Barham, 11/04/2013)
* Rachel Rayns (David Barham, 11/04/2013)
* Giovanni Orlando (David Barham, 15/04/2013)
* Chunhe Yu (Nicholas Johnson, 04/04/2013)
* Marko Cosic (Nicholas Johnson, 04/04/2013)
* Mark Watson (Nicholas Johnson, 04/04/2013)
* Andy Fisher (Nicholas Johnson, 02/05/2013)
* David Bebb (Nicholas Johnson, 02/05/2013)
* Simon Haydn (Nicholas Johnson, 02/05/2013)
* Adrian Carr (Nicholas Johnson, 02/05/2013)
* John Clamp (Nicholas Johnson, 10/05/2013)
* Maciek Piatek (Nicholas Johnson, 10/05/2013)
* Antonio Barragan (Nicholas Johnson, 10/05/2013)
* John Sturdy (Nicholas Johnson, 10/05/2013)
* Roeland Schumacher (Nicholas Johnson, 10/05/2013)
* Mark Tillotson (Nicholas Johnson, 10/05/2013)
* Ward Hills (Nicholas Johnson, 10/05/2013)
* Anne Harrison (Nicholas Johnson, 17/05/2013)
* William Morton (Nicholas Johnson, 17/05/2013)
* Ali (Nicholas Johnson, 17/05/2013)
* Rod Williams (Nicholas Johnson, 17/05/2013)
* Toby Moncaster (Simon Ford, 30/5/2013)
* Damien Guihen (David Barham, 08/06/2013)
* Ben Evan (David Barham, 08/06/2013)
* Jake Young (David Barham, 08/06/2013)
* Shareef Jalloq (David Barham, 08/06/2013)
* Renee Chow (David Barham, 08/06/2013)
* Dan Tidhar, (David Barham, 24/6/2013)
* Mat Cook, (David Barham, 24/6/2013)
* Toby Roberts (David Barham, 24/6/2013)
* Jonathan Austin (David Barham, 24/6/2013)
* Stacy Smith (David Barham, 13/8/2013)
* Matt Harvey (David Barham, 13/8/2013)
* Marcin (David Barham, 13/8/2013)
* James Waldmeyer (David Barham, 18/9/2013)
* Chris Wilson (David Barham, 18/9/2013)
* Kevin Maloney (David Barham, 18/9/2013)
* Harry Braviner (David Barham, 18/9/2013)
* Lee (David Barham, 18/9/2013)
* Jon Aas (Toby Moncaster, 24/9/2013)
* Armando Carlone (Toby Moncaster, 24/9/2013)
* Eckart Jack (Toby Moncaster, 24/9/2013)
* Pop Sharma (Toby Moncaster, 24/9/2013)
* Anthony Wainman (Toby Moncaster, 13/10/13)
* Hazel Jenkins (Toby Moncaster, 13/10/13)
* James Hutton (Toby Moncaster, 13/10/13)
* Jia Wei Lim (Toby Moncaster, 13/10/13)
* Julius Schmidt (Toby Moncaster, 13/10/13)
* Riccardo Gherardi (Toby Moncaster, 23/10/13)
* Anna Stoilova (Toby Moncaster, 23/10/13)
* Glyn Knowles (Toby Moncaster, 23/10/13)
* James Cooke (Toby Moncaster, 23/10/13)
* Jennifer Herbert (Toby Moncaster, 23/10/13)
* Simon Birrell (Toby Moncaster, 23/10/13)
* Theo Sanderson (Toby Moncaster, 23/10/13)
* Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)
* John Campbell (Toby Moncaster, 30/10/13)
* Stephen Jeapes (Toby Moncaster, 30/10/13)
* Chris Stanley (Toby Moncaster, 30/10/13)
* Mat Greenwood (Toby Moncaster, 30/10/13)
* Jonathon Brookfield (Toby Moncaster, 30/10/13)
* Matt Grimes (Toby Moncaster, 30/10/13)
* Richard Fosh (Toby Moncaster, 30/10/13)
* Esther Leighton (Toby Moncaster, 30/10/13)
* Katia Dilks (Toby Moncaster, 21/11/13)
* Tim Dilks (Toby Moncaster, 21/11/13)
* Alexander MacFaden (Toby Moncaster, 21/11/13)
* Brian Starkey (Toby Moncaster, 21/11/13)
* Dave Potts (Martin de Selincourt, 4/12/13)
* Andy Spencer (Martin de Selincourt, 4/12/13)
* Jon Green (Martin de Selincourt, 4/12/13)
* Danny Garden (Martin de Selincourt, 4/12/13)
* Steve Wiseman (Martin de Selincourt, 4/12/13)
* Patrick Wollner (David Barham, 18/2/14)
* Leonardo Impett (David Barham, 18/2/14)
* Diana Probst (Brian Starkey, 19/3/14)
* Hidde-Jan Lemstra (Brian Starkey, 19/3/14)
* Francisco Cordobes (Brian Starkey, 19/3/14)
* Peter Ferguson (Mat Cook March 5 2014)
* Tim Hayward (Mat Cook March 5 2014)
* Jason White (Mat Cook March 5 2014)
* Stuart Wilson (Mat Cook March 5 2014)
* Steve Harrison (Mat Cook March 5 2014)
* Alex Atkinson (Mat Cook March 12 2014)
* Kate Aston (Mat Cook March 12 2014)
* Sheila Shepherd (Mat Cook March 12 2014)
* Rachel Bow (Mat Cook March 12 2014)
* Emyr James (Mat Cook March 12 2014)
* Peter Knight (Mat Cook March 12 2014)
* Andy Gale (Mat Cook March 26 2014)
* Owen McAree (Mat Cook March 26 2014)
* Michal Stefenow (Mat Cook March 26 2014)
* Neil Tan (Mat Cook March 26 2014)
* Vaiva Kalmkaite? (Mat Cook Apr 23 2014)
* Alberto Santos (Mat Cook Apr 23 2014)
* Sonny Siree (sp?) (Mat Cook Apr 23 2014)
* Tim Ronsell (Mat Cook Apr 23 2014)
* Rob Voisey (Mat Cook Apr 23 2014)
* Mike Hunter (Mat Cook Apr 23 2014)
* Tony Bunting (Brian Starkey 30/4/14)
* Eric Jones (Brian Starkey 30/4/14)
* Carl Phillips (Brian Starkey 30/4/14)
* Ed Ben (Brian Starkey 30/4/14)
* Toby Norman (Brian Starkey 30/4/14)
* Marco Galardini (Mat Cook May 7 2014)
* Thomas Keller (Mat Cook May 7 2014)
* Martin Lenz (Mat Cook 28 May 2014)
* David Grech (Mat Cook 28 May 2014)
* Rick Lupton (Mat Cook 28 May 2014)
* Tim Regan (Mat Cook 28 May 2014)
* Shashank Srinivasan (Mat Cook 28 May 2014)
* Al Napp (Mat Cook 4 June 2014)
* Tom Roberts (Mat Cook 4 June 2014)
* Matthew Taylor (Mat Cook 4 June 2014)
* Milosz Wasilewski (Mat Cook 4 June 2014)
* Matt Grimes (Brian Starkey 11/06/14)
* Brandon Invergo (Brian Starkey 11/06/14)
* Simon West (Brian Starkey 11/06/14)
* Kevin Rathbone (Brian Starkey 11/06/14)
* Richard Gordon (Brian Starkey 11/06/14)
* Rob Yates (Brian Starkey 12/07/14)
* Alex Gee (Brian Starkey 12/07/14)
* Patrick Beigent (Brian Starkey 12/07/14)
* Guilliame Tucker (Brian Starkey 12/07/14)
* Jo Brook (Brian Starkey 12/07/14)
* David Taylor (Brian Starkey 12/07/14)
* Joe Watson (Brian Starkey 23/07/14)
* Richard Armstrong (Brian Starkey 23/07/14)
* Eric Gowland (Brian Starkey 23/07/14)
* Paul Holland (Brian Starkey 23/07/14)
* Craig Richardson (Brian Starkey 23/07/14)
* Stevan Wing (Mat Cook 11/08/2014)
* Greaham Douglas (Stevan Wing 17/09/2014)
* Joseph Gamble (Stevan Wing 17/09/2014)
* Robert Fryers (Stevan Wing 17/09/2014)
* Will Hartley (Stevan Wing 17/09/2014)
* Alistair Turnbull (Stevan Wing 24/09/2014)
* Tim Ramsdale (Stevan Wing 24/09/2014)
* Hugo Van Sansen (Stevan Wing 24/09/2014)
* Marco Aita (David Barham 08/10/2014)
* Rob Shore (David Barham 08/10/2014)
* Katy Marshall (David Barham 08/10/2014)
* John Clarke (David Barham 08/10/2014)
* Danny Farrant (Stevan Wing 15/10/2014)
* John Ginger (Stevan Wing 15/10/2014)
* Emilo Mont (Stevan Wing 15/10/2014)
* Geoff Lunn (Stevan Wing 15/10/2014)

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Laser
* Cutting Mechanics
* Water Cooler System
* Filter
* PC
* Materials (what it can cut, supply)

Checks for everyone to do
* Check in use, looks ok
* Check water bath, temperature

Powering Up
* Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)
* Turning on Laser and warmup, what to do if doesn't power up
* Turning on PC and starting software

LaserCut Project walkthrough (using M+S+text keyring example)
* Package function, drawing, import file types
* Bed dimensions
* Paths, yellow dots, 'united' shapes
* Blue dot, Immediate mode
* Layers and colours
* Through cut, surface cut and engraving, speeds and strengths
* Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)
* Job ordering
* Saving
* Download as immediate, delete, download current

Laser Operation
* Lid
* Control panel, escape
* Moving head XY, indicator laser, datum
* Moving Z
* Focus
* Start position and test
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Laser Hazards
* Process and progression for normal operation failure (fire) - pause, open, move, CO2
* Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2
* Ensure confident of process

Power Down
* Switch off laser
* Switch off filtration
* Clean any residue from the bed or bottom tray
* Close lid

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make a personalised focus tool
* Square acrylic of appropriate size
* Member's name, "Focus Tool", keychain hole
* Should use full cut, surface cut, engrave
* Should demonstrate all steps, size, appropriate ordering, positioning

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to lasering (watch carefully all steps)
* Ask to stop job/restart, question escalation process

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Shiny New Tool Chests

2014-10-12T13:21:23Z

Stevancw: /* Electronics Workbench Tool Chest */

There's a tentative proposal on the mailing list to get some actually good hand tools, and storage such that these don't get lost and are marked as being good. The hope is that this will encourage people to treat them with respect, and to return them to their homes properly.

One tool chest makes no sense, we have multiple kinds of tools and multiple places where such things need to be accessed. So, this page is intended to capture the broad categories we need, and the specific tools we want in those categories. Once we have a reasonable idea, we will go and buy good stuff, and the space will have decent small tools (and there will be much rejoicing)

Please either add to the existing categories, or create a new one if you think that's needed.

--[[User:Tomoinn|tmo]] ([[User talk:Tomoinn|talk]]) 00:21, 10 October 2014 (BST)

== Electronics Workbench Tool Chest ==

Intended to live at or near the electronics workbench, and contain the tools which one needs while working there. Also for projects likely to be assembled and worked on at the large white table in the main space, so focusing on electronics and small to medium scale robotics.

* Hex drivers
* Wire cutters
* Wire strippers
* Pearl catcher
* Tweezers
* Fine nosed pliers
* SMD helpers (basically small heat-proof steel pointy things)
* Jeweller's screwdrivers
* Adjustable spanners
* Small files
* Dremel bits and tools
* Solder reel holders
* Helping hands
* ...

== Secure Workshop Woodworking Tool Chest ==

Lives in the secure workshop, houses tools which are intended solely for working on wood.

* Planes
* Spokeshaves
* Cabinet scrapers
* Wood chisels
* Sharpening system
* Rasps
* Brace and bit?
* Wood drill bits. Forstner bits, Flat/Spade bits, Brad-point bits
* set of hole saws
* Set of countersink bits
* Set of Combined Drill & Countersinks (e.g. http://www.axminster.co.uk/combined-drill-countersinks-with-hex-shanks-hts-set-5 or maybe we can make a set from flat tool steel)
* Plug cutter set.
* Sanding blocks / paper
* Wood saws, e.g. http://www.axminster.co.uk/axminster-fineline-saw-pack
* Coping saw (and lots of blades)
* Fretsaw (and lots of blades, including spiral blade)
* Flushcut saw
* Screwdrivers: Slot, Philips, Pozidrive (and maybe hex & torx). Stubby as well as normal length.
* One-handed clamps, lots of 'em
* A set of panel clamps
* Framing square
* Squares, combination square, sliding Bevel Gauge (and maybe a mini one too)
* Bevel setter (e.g. http://www.axminster.co.uk/media/downloads/475365_manual.pdf)
* Marking gauge and mortice gauge
* Marking knife
* Staple gun
* Hammers
* Mallets
* ...

This probably won't be a chest, it will be wall, perhaps?

== Secure Workshop Metalworking Tool Chest ==

Lives in the secure workshop, houses tools which are intended solely for working on metal.

* Metal drill bits
* Metal files
* Hacksaws
* Taps and dies
* ...

== General Tool Chest ==

General tools, useful all around the space for larger pieces of work. I suggest this lives just inside or just outside of the secure workshop if we can find space for it.

* Socket wrench set
* Larger adjustable spanners
* Larger screwdrivers
* Knives
* ...

Equipment/Laser Cutter/Training

2014-09-24T20:22:41Z

Stevancw: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training

= Laser Cutter Training =

This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.

== Booking ==

Sessions are advertised on '''http://meetup.makespace.org'''
* For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]

Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are owner/trainers of the laser cutter:
* Simon Ford
* David Barham
* Nick Johnson
* Toby Moncaster
* Martin de Selincourt
* Mat Cook
* [[User:stevancw|Stevan Wing]]

The following members of Makespace are trainers on the laser cutter:
* Brian Starkey

The following members of Makespace are owners on the laser cutter:
* Diane Probst

The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):
* Steve Upton (Simon Ford, 23/01/2013)
* Martin de Selincourt (Simon Ford, 23/01/2013)
* Oliver Jackson (Simon Ford, 23/01/2013)
* Simon Stirley (Simon Ford, 01/02/2013)
* Stephen Woolhead (Simon Ford, 01/02/2013)
* Martin Levine (Simon Ford, 01/02/2013)
* Uwe Borowski (Simon Ford, 01/02/2013)
* Peter Sewell (Simon Ford, 03/02/2013)
* Steve Loughran (Simon Ford, 03/02/2013)
* ST John (Simon Ford, 03/02/2013)
* Henry Gomersall (Simon Ford, 03/02/2013)
* Brian Corteil (Simon Ford, 05/02/2013)
* Wayne Keenan (Simon Ford, 05/02/2013)
* Andrew Dunn (Simon Ford, 05/02/2013)
* David Knell (Simon Ford, 05/02/2013)
* Tom Oinn (David Barham, 12/02/2013)
* Amir Chaudhry (David Barham, 12/02/2013)
* Anil Madhavapeddy (David Barham, 12/02/2013)
* Edward Imhagwe (David Barham, 12/02/2013)
* Michael Dales (Simon Ford, 2/03/2013)
* Laura James (Simon Ford, 2/03/2013)
* Robert Copcutt (Simon Ford, 2/03/2013)
* Phil Cowans (Simon Ford, 2/03/2013)
* Errol McMullen (Simon Ford, 9/03/2013)
* Gaye Soykok (Simon Ford, 19/03/2013)
* Mark Williamson (Simon Ford, 19/03/2013)
* Joe Tapply (Simon Ford, 19/03/2013)
* Dan Ros (Simon Ford, 19/03/2013)
* Paul Osborn (Simon Ford, 27/03/2013)
* David Esteves (Simon Ford, 27/03/2013)
* Zé Pinto Ferreira (Simon Ford, 27/03/2013)
* Sharath (Simon Ford, 27/03/2013)
* Andy Jude (Simon Ford, 5/04/2013)
* Mark Mellors (Simon Ford, 5/04/2013)
* Chris Abri (Simon Ford, 5/04/2013)
* Tom Ingham (Simon Ford, 5/04/2013)
* Adrian van den Heever (David Barham, 11/04/2013)
* Chris Voth (David Barham, 11/04/2013)
* Archie Reid (David Barham, 11/04/2013)
* Rachel Rayns (David Barham, 11/04/2013)
* Giovanni Orlando (David Barham, 15/04/2013)
* Chunhe Yu (Nicholas Johnson, 04/04/2013)
* Marko Cosic (Nicholas Johnson, 04/04/2013)
* Mark Watson (Nicholas Johnson, 04/04/2013)
* Andy Fisher (Nicholas Johnson, 02/05/2013)
* David Bebb (Nicholas Johnson, 02/05/2013)
* Simon Haydn (Nicholas Johnson, 02/05/2013)
* Adrian Carr (Nicholas Johnson, 02/05/2013)
* John Clamp (Nicholas Johnson, 10/05/2013)
* Maciek Piatek (Nicholas Johnson, 10/05/2013)
* Antonio Barragan (Nicholas Johnson, 10/05/2013)
* John Sturdy (Nicholas Johnson, 10/05/2013)
* Roeland Schumacher (Nicholas Johnson, 10/05/2013)
* Mark Tillotson (Nicholas Johnson, 10/05/2013)
* Ward Hills (Nicholas Johnson, 10/05/2013)
* Anne Harrison (Nicholas Johnson, 17/05/2013)
* William Morton (Nicholas Johnson, 17/05/2013)
* Ali (Nicholas Johnson, 17/05/2013)
* Rod Williams (Nicholas Johnson, 17/05/2013)
* Toby Moncaster (Simon Ford, 30/5/2013)
* Damien Guihen (David Barham, 08/06/2013)
* Ben Evan (David Barham, 08/06/2013)
* Jake Young (David Barham, 08/06/2013)
* Shareef Jalloq (David Barham, 08/06/2013)
* Renee Chow (David Barham, 08/06/2013)
* Dan Tidhar, (David Barham, 24/6/2013)
* Mat Cook, (David Barham, 24/6/2013)
* Toby Roberts (David Barham, 24/6/2013)
* Jonathan Austin (David Barham, 24/6/2013)
* Stacy Smith (David Barham, 13/8/2013)
* Matt Harvey (David Barham, 13/8/2013)
* Marcin (David Barham, 13/8/2013)
* James Waldmeyer (David Barham, 18/9/2013)
* Chris Wilson (David Barham, 18/9/2013)
* Kevin Maloney (David Barham, 18/9/2013)
* Harry Braviner (David Barham, 18/9/2013)
* Lee (David Barham, 18/9/2013)
* Jon Aas (Toby Moncaster, 24/9/2013)
* Armando Carlone (Toby Moncaster, 24/9/2013)
* Eckart Jack (Toby Moncaster, 24/9/2013)
* Pop Sharma (Toby Moncaster, 24/9/2013)
* Anthony Wainman (Toby Moncaster, 13/10/13)
* Hazel Jenkins (Toby Moncaster, 13/10/13)
* James Hutton (Toby Moncaster, 13/10/13)
* Jia Wei Lim (Toby Moncaster, 13/10/13)
* Julius Schmidt (Toby Moncaster, 13/10/13)
* Riccardo Gherardi (Toby Moncaster, 23/10/13)
* Anna Stoilova (Toby Moncaster, 23/10/13)
* Glyn Knowles (Toby Moncaster, 23/10/13)
* James Cooke (Toby Moncaster, 23/10/13)
* Jennifer Herbert (Toby Moncaster, 23/10/13)
* Simon Birrell (Toby Moncaster, 23/10/13)
* Theo Sanderson (Toby Moncaster, 23/10/13)
* Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)
* John Campbell (Toby Moncaster, 30/10/13)
* Stephen Jeapes (Toby Moncaster, 30/10/13)
* Chris Stanley (Toby Moncaster, 30/10/13)
* Mat Greenwood (Toby Moncaster, 30/10/13)
* Jonathon Brookfield (Toby Moncaster, 30/10/13)
* Matt Grimes (Toby Moncaster, 30/10/13)
* Richard Fosh (Toby Moncaster, 30/10/13)
* Esther Leighton (Toby Moncaster, 30/10/13)
* Katia Dilks (Toby Moncaster, 21/11/13)
* Tim Dilks (Toby Moncaster, 21/11/13)
* Alexander MacFaden (Toby Moncaster, 21/11/13)
* Brian Starkey (Toby Moncaster, 21/11/13)
* Dave Potts (Martin de Selincourt, 4/12/13)
* Andy Spencer (Martin de Selincourt, 4/12/13)
* Jon Green (Martin de Selincourt, 4/12/13)
* Danny Garden (Martin de Selincourt, 4/12/13)
* Steve Wiseman (Martin de Selincourt, 4/12/13)
* Patrick Wollner (David Barham, 18/2/14)
* Leonardo Impett (David Barham, 18/2/14)
* Diana Probst (Brian Starkey, 19/3/14)
* Hidde-Jan Lemstra (Brian Starkey, 19/3/14)
* Francisco Cordobes (Brian Starkey, 19/3/14)
* Peter Ferguson (Mat Cook March 5 2014)
* Tim Hayward (Mat Cook March 5 2014)
* Jason White (Mat Cook March 5 2014)
* Stuart Wilson (Mat Cook March 5 2014)
* Steve Harrison (Mat Cook March 5 2014)
* Alex Atkinson (Mat Cook March 12 2014)
* Kate Aston (Mat Cook March 12 2014)
* Sheila Shepherd (Mat Cook March 12 2014)
* Rachel Bow (Mat Cook March 12 2014)
* Emyr James (Mat Cook March 12 2014)
* Peter Knight (Mat Cook March 12 2014)
* Andy Gale (Mat Cook March 26 2014)
* Owen McAree (Mat Cook March 26 2014)
* Michal Stefenow (Mat Cook March 26 2014)
* Neil Tan (Mat Cook March 26 2014)
* Vaiva Kalmkaite? (Mat Cook Apr 23 2014)
* Alberto Santos (Mat Cook Apr 23 2014)
* Sonny Siree (sp?) (Mat Cook Apr 23 2014)
* Tim Ronsell (Mat Cook Apr 23 2014)
* Rob Voisey (Mat Cook Apr 23 2014)
* Mike Hunter (Mat Cook Apr 23 2014)
* Tony Bunting (Brian Starkey 30/4/14)
* Eric Jones (Brian Starkey 30/4/14)
* Carl Phillips (Brian Starkey 30/4/14)
* Ed Ben (Brian Starkey 30/4/14)
* Toby Norman (Brian Starkey 30/4/14)
* Marco Galardini (Mat Cook May 7 2014)
* Thomas Keller (Mat Cook May 7 2014)
* Martin Lenz (Mat Cook 28 May 2014)
* David Grech (Mat Cook 28 May 2014)
* Rick Lupton (Mat Cook 28 May 2014)
* Tim Regan (Mat Cook 28 May 2014)
* Shashank Srinivasan (Mat Cook 28 May 2014)
* Al Napp (Mat Cook 4 June 2014)
* Tom Roberts (Mat Cook 4 June 2014)
* Matthew Taylor (Mat Cook 4 June 2014)
* Milosz Wasilewski (Mat Cook 4 June 2014)
* Matt Grimes (Brian Starkey 11/06/14)
* Brandon Invergo (Brian Starkey 11/06/14)
* Simon West (Brian Starkey 11/06/14)
* Kevin Rathbone (Brian Starkey 11/06/14)
* Richard Gordon (Brian Starkey 11/06/14)
* Rob Yates (Brian Starkey 12/07/14)
* Alex Gee (Brian Starkey 12/07/14)
* Patrick Beigent (Brian Starkey 12/07/14)
* Guilliame Tucker (Brian Starkey 12/07/14)
* Jo Brook (Brian Starkey 12/07/14)
* David Taylor (Brian Starkey 12/07/14)
* Joe Watson (Brian Starkey 23/07/14)
* Richard Armstrong (Brian Starkey 23/07/14)
* Eric Gowland (Brian Starkey 23/07/14)
* Paul Holland (Brian Starkey 23/07/14)
* Craig Richardson (Brian Starkey 23/07/14)
* Stevan Wing (Mat Cook 11/08/2014)
* Greaham Douglas (Stevan Wing 17/09/2014)
* Joseph Gamble (Stevan Wing 17/09/2014)
* Robert Fryers (Stevan Wing 17/09/2014)
* Will Hartley (Stevan Wing 17/09/2014)
* Alistair Turnbull (Stevan Wing 24/09/2014)
* Tim Ramsdale (Stevan Wing 24/09/2014)
* Hugo Van Sansen (Stevan Wing 24/09/2014)

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Laser
* Cutting Mechanics
* Water Cooler System
* Filter
* PC
* Materials (what it can cut, supply)

Checks for everyone to do
* Check in use, looks ok
* Check water bath, temperature

Powering Up
* Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)
* Turning on Laser and warmup, what to do if doesn't power up
* Turning on PC and starting software

LaserCut Project walkthrough (using M+S+text keyring example)
* Package function, drawing, import file types
* Bed dimensions
* Paths, yellow dots, 'united' shapes
* Blue dot, Immediate mode
* Layers and colours
* Through cut, surface cut and engraving, speeds and strengths
* Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)
* Job ordering
* Saving
* Download as immediate, delete, download current

Laser Operation
* Lid
* Control panel, escape
* Moving head XY, indicator laser, datum
* Moving Z
* Focus
* Start position and test
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Laser Hazards
* Process and progression for normal operation failure (fire) - pause, open, move, CO2
* Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2
* Ensure confident of process

Power Down
* Switch off laser
* Switch off filtration
* Clean any residue from the bed or bottom tray
* Close lid

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make a personalised focus tool
* Square acrylic of appropriate size
* Member's name, "Focus Tool", keychain hole
* Should use full cut, surface cut, engrave
* Should demonstrate all steps, size, appropriate ordering, positioning

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to lasering (watch carefully all steps)
* Ask to stop job/restart, question escalation process

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/Laser Cutter/Training

2014-09-18T09:16:07Z

Stevancw: New inducted memeber 17/09/2014

[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training

= Laser Cutter Training =

This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.

== Booking ==

Sessions are advertised on '''http://meetup.makespace.org'''
* For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]

Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are owner/trainers of the laser cutter:
* Simon Ford
* David Barham
* Nick Johnson
* Toby Moncaster
* Martin de Selincourt
* Mat Cook
* [[User:stevancw|Stevan Wing]]

The following members of Makespace are trainers on the laser cutter:
* Brian Starkey

The following members of Makespace are owners on the laser cutter:
* Diane Probst

The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):
* Steve Upton (Simon Ford, 23/01/2013)
* Martin de Selincourt (Simon Ford, 23/01/2013)
* Oliver Jackson (Simon Ford, 23/01/2013)
* Simon Stirley (Simon Ford, 01/02/2013)
* Stephen Woolhead (Simon Ford, 01/02/2013)
* Martin Levine (Simon Ford, 01/02/2013)
* Uwe Borowski (Simon Ford, 01/02/2013)
* Peter Sewell (Simon Ford, 03/02/2013)
* Steve Loughran (Simon Ford, 03/02/2013)
* ST John (Simon Ford, 03/02/2013)
* Henry Gomersall (Simon Ford, 03/02/2013)
* Brian Corteil (Simon Ford, 05/02/2013)
* Wayne Keenan (Simon Ford, 05/02/2013)
* Andrew Dunn (Simon Ford, 05/02/2013)
* David Knell (Simon Ford, 05/02/2013)
* Tom Oinn (David Barham, 12/02/2013)
* Amir Chaudhry (David Barham, 12/02/2013)
* Anil Madhavapeddy (David Barham, 12/02/2013)
* Edward Imhagwe (David Barham, 12/02/2013)
* Michael Dales (Simon Ford, 2/03/2013)
* Laura James (Simon Ford, 2/03/2013)
* Robert Copcutt (Simon Ford, 2/03/2013)
* Phil Cowans (Simon Ford, 2/03/2013)
* Errol McMullen (Simon Ford, 9/03/2013)
* Gaye Soykok (Simon Ford, 19/03/2013)
* Mark Williamson (Simon Ford, 19/03/2013)
* Joe Tapply (Simon Ford, 19/03/2013)
* Dan Ros (Simon Ford, 19/03/2013)
* Paul Osborn (Simon Ford, 27/03/2013)
* David Esteves (Simon Ford, 27/03/2013)
* Zé Pinto Ferreira (Simon Ford, 27/03/2013)
* Sharath (Simon Ford, 27/03/2013)
* Andy Jude (Simon Ford, 5/04/2013)
* Mark Mellors (Simon Ford, 5/04/2013)
* Chris Abri (Simon Ford, 5/04/2013)
* Tom Ingham (Simon Ford, 5/04/2013)
* Adrian van den Heever (David Barham, 11/04/2013)
* Chris Voth (David Barham, 11/04/2013)
* Archie Reid (David Barham, 11/04/2013)
* Rachel Rayns (David Barham, 11/04/2013)
* Giovanni Orlando (David Barham, 15/04/2013)
* Chunhe Yu (Nicholas Johnson, 04/04/2013)
* Marko Cosic (Nicholas Johnson, 04/04/2013)
* Mark Watson (Nicholas Johnson, 04/04/2013)
* Andy Fisher (Nicholas Johnson, 02/05/2013)
* David Bebb (Nicholas Johnson, 02/05/2013)
* Simon Haydn (Nicholas Johnson, 02/05/2013)
* Adrian Carr (Nicholas Johnson, 02/05/2013)
* John Clamp (Nicholas Johnson, 10/05/2013)
* Maciek Piatek (Nicholas Johnson, 10/05/2013)
* Antonio Barragan (Nicholas Johnson, 10/05/2013)
* John Sturdy (Nicholas Johnson, 10/05/2013)
* Roeland Schumacher (Nicholas Johnson, 10/05/2013)
* Mark Tillotson (Nicholas Johnson, 10/05/2013)
* Ward Hills (Nicholas Johnson, 10/05/2013)
* Anne Harrison (Nicholas Johnson, 17/05/2013)
* William Morton (Nicholas Johnson, 17/05/2013)
* Ali (Nicholas Johnson, 17/05/2013)
* Rod Williams (Nicholas Johnson, 17/05/2013)
* Toby Moncaster (Simon Ford, 30/5/2013)
* Damien Guihen (David Barham, 08/06/2013)
* Ben Evan (David Barham, 08/06/2013)
* Jake Young (David Barham, 08/06/2013)
* Shareef Jalloq (David Barham, 08/06/2013)
* Renee Chow (David Barham, 08/06/2013)
* Dan Tidhar, (David Barham, 24/6/2013)
* Mat Cook, (David Barham, 24/6/2013)
* Toby Roberts (David Barham, 24/6/2013)
* Jonathan Austin (David Barham, 24/6/2013)
* Stacy Smith (David Barham, 13/8/2013)
* Matt Harvey (David Barham, 13/8/2013)
* Marcin (David Barham, 13/8/2013)
* James Waldmeyer (David Barham, 18/9/2013)
* Chris Wilson (David Barham, 18/9/2013)
* Kevin Maloney (David Barham, 18/9/2013)
* Harry Braviner (David Barham, 18/9/2013)
* Lee (David Barham, 18/9/2013)
* Jon Aas (Toby Moncaster, 24/9/2013)
* Armando Carlone (Toby Moncaster, 24/9/2013)
* Eckart Jack (Toby Moncaster, 24/9/2013)
* Pop Sharma (Toby Moncaster, 24/9/2013)
* Anthony Wainman (Toby Moncaster, 13/10/13)
* Hazel Jenkins (Toby Moncaster, 13/10/13)
* James Hutton (Toby Moncaster, 13/10/13)
* Jia Wei Lim (Toby Moncaster, 13/10/13)
* Julius Schmidt (Toby Moncaster, 13/10/13)
* Riccardo Gherardi (Toby Moncaster, 23/10/13)
* Anna Stoilova (Toby Moncaster, 23/10/13)
* Glyn Knowles (Toby Moncaster, 23/10/13)
* James Cooke (Toby Moncaster, 23/10/13)
* Jennifer Herbert (Toby Moncaster, 23/10/13)
* Simon Birrell (Toby Moncaster, 23/10/13)
* Theo Sanderson (Toby Moncaster, 23/10/13)
* Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)
* John Campbell (Toby Moncaster, 30/10/13)
* Stephen Jeapes (Toby Moncaster, 30/10/13)
* Chris Stanley (Toby Moncaster, 30/10/13)
* Mat Greenwood (Toby Moncaster, 30/10/13)
* Jonathon Brookfield (Toby Moncaster, 30/10/13)
* Matt Grimes (Toby Moncaster, 30/10/13)
* Richard Fosh (Toby Moncaster, 30/10/13)
* Esther Leighton (Toby Moncaster, 30/10/13)
* Katia Dilks (Toby Moncaster, 21/11/13)
* Tim Dilks (Toby Moncaster, 21/11/13)
* Alexander MacFaden (Toby Moncaster, 21/11/13)
* Brian Starkey (Toby Moncaster, 21/11/13)
* Dave Potts (Martin de Selincourt, 4/12/13)
* Andy Spencer (Martin de Selincourt, 4/12/13)
* Jon Green (Martin de Selincourt, 4/12/13)
* Danny Garden (Martin de Selincourt, 4/12/13)
* Steve Wiseman (Martin de Selincourt, 4/12/13)
* Patrick Wollner (David Barham, 18/2/14)
* Leonardo Impett (David Barham, 18/2/14)
* Diana Probst (Brian Starkey, 19/3/14)
* Hidde-Jan Lemstra (Brian Starkey, 19/3/14)
* Francisco Cordobes (Brian Starkey, 19/3/14)
* Peter Ferguson (Mat Cook March 5 2014)
* Tim Hayward (Mat Cook March 5 2014)
* Jason White (Mat Cook March 5 2014)
* Stuart Wilson (Mat Cook March 5 2014)
* Steve Harrison (Mat Cook March 5 2014)
* Alex Atkinson (Mat Cook March 12 2014)
* Kate Aston (Mat Cook March 12 2014)
* Sheila Shepherd (Mat Cook March 12 2014)
* Rachel Bow (Mat Cook March 12 2014)
* Emyr James (Mat Cook March 12 2014)
* Peter Knight (Mat Cook March 12 2014)
* Andy Gale (Mat Cook March 26 2014)
* Owen McAree (Mat Cook March 26 2014)
* Michal Stefenow (Mat Cook March 26 2014)
* Neil Tan (Mat Cook March 26 2014)
* Vaiva Kalmkaite? (Mat Cook Apr 23 2014)
* Alberto Santos (Mat Cook Apr 23 2014)
* Sonny Siree (sp?) (Mat Cook Apr 23 2014)
* Tim Ronsell (Mat Cook Apr 23 2014)
* Rob Voisey (Mat Cook Apr 23 2014)
* Mike Hunter (Mat Cook Apr 23 2014)
* Tony Bunting (Brian Starkey 30/4/14)
* Eric Jones (Brian Starkey 30/4/14)
* Carl Phillips (Brian Starkey 30/4/14)
* Ed Ben (Brian Starkey 30/4/14)
* Toby Norman (Brian Starkey 30/4/14)
* Marco Galardini (Mat Cook May 7 2014)
* Thomas Keller (Mat Cook May 7 2014)
* Martin Lenz (Mat Cook 28 May 2014)
* David Grech (Mat Cook 28 May 2014)
* Rick Lupton (Mat Cook 28 May 2014)
* Tim Regan (Mat Cook 28 May 2014)
* Shashank Srinivasan (Mat Cook 28 May 2014)
* Al Napp (Mat Cook 4 June 2014)
* Tom Roberts (Mat Cook 4 June 2014)
* Matthew Taylor (Mat Cook 4 June 2014)
* Milosz Wasilewski (Mat Cook 4 June 2014)
* Matt Grimes (Brian Starkey 11/06/14)
* Brandon Invergo (Brian Starkey 11/06/14)
* Simon West (Brian Starkey 11/06/14)
* Kevin Rathbone (Brian Starkey 11/06/14)
* Richard Gordon (Brian Starkey 11/06/14)
* Rob Yates (Brian Starkey 12/07/14)
* Alex Gee (Brian Starkey 12/07/14)
* Patrick Beigent (Brian Starkey 12/07/14)
* Guilliame Tucker (Brian Starkey 12/07/14)
* Jo Brook (Brian Starkey 12/07/14)
* David Taylor (Brian Starkey 12/07/14)
* Joe Watson (Brian Starkey 23/07/14)
* Richard Armstrong (Brian Starkey 23/07/14)
* Eric Gowland (Brian Starkey 23/07/14)
* Paul Holland (Brian Starkey 23/07/14)
* Craig Richardson (Brian Starkey 23/07/14)
* Stevan Wing (Mat Cook 11/08/2014)
* Greaham Douglas (Stevan Wing 17/09/2014)
* Joseph Gamble (Stevan Wing 17/09/2014)
* Robert Fryers (Stevan Wing 17/09/2014)
* Will Hartley (Stevan Wing 17/09/2014)

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Laser
* Cutting Mechanics
* Water Cooler System
* Filter
* PC
* Materials (what it can cut, supply)

Checks for everyone to do
* Check in use, looks ok
* Check water bath, temperature

Powering Up
* Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)
* Turning on Laser and warmup, what to do if doesn't power up
* Turning on PC and starting software

LaserCut Project walkthrough (using M+S+text keyring example)
* Package function, drawing, import file types
* Bed dimensions
* Paths, yellow dots, 'united' shapes
* Blue dot, Immediate mode
* Layers and colours
* Through cut, surface cut and engraving, speeds and strengths
* Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)
* Job ordering
* Saving
* Download as immediate, delete, download current

Laser Operation
* Lid
* Control panel, escape
* Moving head XY, indicator laser, datum
* Moving Z
* Focus
* Start position and test
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Laser Hazards
* Process and progression for normal operation failure (fire) - pause, open, move, CO2
* Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2
* Ensure confident of process

Power Down
* Switch off laser
* Switch off filtration
* Clean any residue from the bed or bottom tray
* Close lid

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make a personalised focus tool
* Square acrylic of appropriate size
* Member's name, "Focus Tool", keychain hole
* Should use full cut, surface cut, engrave
* Should demonstrate all steps, size, appropriate ordering, positioning

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to lasering (watch carefully all steps)
* Ask to stop job/restart, question escalation process

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/Laser Cutter/Training

2014-09-16T14:17:48Z

Stevancw: /* Trained Users */

[[Equipment|Equipment]] / [[Equipment/Laser_Cutter|Laser Cutter]] / Training

= Laser Cutter Training =

This page documents the process for being trained on the Laser Cutter, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the Laser Cutter is run by the Laser Cutter Owners. The Laser Cutter Owners are a group of people responsible for maintaining and training on the laser cutter, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the laser cutter.

== Booking ==

Sessions are advertised on '''http://meetup.makespace.org'''
* For discussing training, or requesting additional slots if needed, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/vNrS07zVuY0/discussion Training : Laser Cutter]

Notes:
* You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
* You must do the group and individual training on the same day

= Trained Users =

The following members of Makespace are owner/trainers of the laser cutter:
* Simon Ford
* David Barham
* Nick Johnson
* Toby Moncaster
* Martin de Selincourt
* Mat Cook
* [[User:stevancw|Stevan Wing]]

The following members of Makespace are trainers on the laser cutter:
* Brian Starkey

The following members of Makespace are owners on the laser cutter:
* Diane Probst

The following members of Makespace are trained and qualified to use the Laser Cutter (note, they are not qualified to train others however):
* Steve Upton (Simon Ford, 23/01/2013)
* Martin de Selincourt (Simon Ford, 23/01/2013)
* Oliver Jackson (Simon Ford, 23/01/2013)
* Simon Stirley (Simon Ford, 01/02/2013)
* Stephen Woolhead (Simon Ford, 01/02/2013)
* Martin Levine (Simon Ford, 01/02/2013)
* Uwe Borowski (Simon Ford, 01/02/2013)
* Peter Sewell (Simon Ford, 03/02/2013)
* Steve Loughran (Simon Ford, 03/02/2013)
* ST John (Simon Ford, 03/02/2013)
* Henry Gomersall (Simon Ford, 03/02/2013)
* Brian Corteil (Simon Ford, 05/02/2013)
* Wayne Keenan (Simon Ford, 05/02/2013)
* Andrew Dunn (Simon Ford, 05/02/2013)
* David Knell (Simon Ford, 05/02/2013)
* Tom Oinn (David Barham, 12/02/2013)
* Amir Chaudhry (David Barham, 12/02/2013)
* Anil Madhavapeddy (David Barham, 12/02/2013)
* Edward Imhagwe (David Barham, 12/02/2013)
* Michael Dales (Simon Ford, 2/03/2013)
* Laura James (Simon Ford, 2/03/2013)
* Robert Copcutt (Simon Ford, 2/03/2013)
* Phil Cowans (Simon Ford, 2/03/2013)
* Errol McMullen (Simon Ford, 9/03/2013)
* Gaye Soykok (Simon Ford, 19/03/2013)
* Mark Williamson (Simon Ford, 19/03/2013)
* Joe Tapply (Simon Ford, 19/03/2013)
* Dan Ros (Simon Ford, 19/03/2013)
* Paul Osborn (Simon Ford, 27/03/2013)
* David Esteves (Simon Ford, 27/03/2013)
* Zé Pinto Ferreira (Simon Ford, 27/03/2013)
* Sharath (Simon Ford, 27/03/2013)
* Andy Jude (Simon Ford, 5/04/2013)
* Mark Mellors (Simon Ford, 5/04/2013)
* Chris Abri (Simon Ford, 5/04/2013)
* Tom Ingham (Simon Ford, 5/04/2013)
* Adrian van den Heever (David Barham, 11/04/2013)
* Chris Voth (David Barham, 11/04/2013)
* Archie Reid (David Barham, 11/04/2013)
* Rachel Rayns (David Barham, 11/04/2013)
* Giovanni Orlando (David Barham, 15/04/2013)
* Chunhe Yu (Nicholas Johnson, 04/04/2013)
* Marko Cosic (Nicholas Johnson, 04/04/2013)
* Mark Watson (Nicholas Johnson, 04/04/2013)
* Andy Fisher (Nicholas Johnson, 02/05/2013)
* David Bebb (Nicholas Johnson, 02/05/2013)
* Simon Haydn (Nicholas Johnson, 02/05/2013)
* Adrian Carr (Nicholas Johnson, 02/05/2013)
* John Clamp (Nicholas Johnson, 10/05/2013)
* Maciek Piatek (Nicholas Johnson, 10/05/2013)
* Antonio Barragan (Nicholas Johnson, 10/05/2013)
* John Sturdy (Nicholas Johnson, 10/05/2013)
* Roeland Schumacher (Nicholas Johnson, 10/05/2013)
* Mark Tillotson (Nicholas Johnson, 10/05/2013)
* Ward Hills (Nicholas Johnson, 10/05/2013)
* Anne Harrison (Nicholas Johnson, 17/05/2013)
* William Morton (Nicholas Johnson, 17/05/2013)
* Ali (Nicholas Johnson, 17/05/2013)
* Rod Williams (Nicholas Johnson, 17/05/2013)
* Toby Moncaster (Simon Ford, 30/5/2013)
* Damien Guihen (David Barham, 08/06/2013)
* Ben Evan (David Barham, 08/06/2013)
* Jake Young (David Barham, 08/06/2013)
* Shareef Jalloq (David Barham, 08/06/2013)
* Renee Chow (David Barham, 08/06/2013)
* Dan Tidhar, (David Barham, 24/6/2013)
* Mat Cook, (David Barham, 24/6/2013)
* Toby Roberts (David Barham, 24/6/2013)
* Jonathan Austin (David Barham, 24/6/2013)
* Stacy Smith (David Barham, 13/8/2013)
* Matt Harvey (David Barham, 13/8/2013)
* Marcin (David Barham, 13/8/2013)
* James Waldmeyer (David Barham, 18/9/2013)
* Chris Wilson (David Barham, 18/9/2013)
* Kevin Maloney (David Barham, 18/9/2013)
* Harry Braviner (David Barham, 18/9/2013)
* Lee (David Barham, 18/9/2013)
* Jon Aas (Toby Moncaster, 24/9/2013)
* Armando Carlone (Toby Moncaster, 24/9/2013)
* Eckart Jack (Toby Moncaster, 24/9/2013)
* Pop Sharma (Toby Moncaster, 24/9/2013)
* Anthony Wainman (Toby Moncaster, 13/10/13)
* Hazel Jenkins (Toby Moncaster, 13/10/13)
* James Hutton (Toby Moncaster, 13/10/13)
* Jia Wei Lim (Toby Moncaster, 13/10/13)
* Julius Schmidt (Toby Moncaster, 13/10/13)
* Riccardo Gherardi (Toby Moncaster, 23/10/13)
* Anna Stoilova (Toby Moncaster, 23/10/13)
* Glyn Knowles (Toby Moncaster, 23/10/13)
* James Cooke (Toby Moncaster, 23/10/13)
* Jennifer Herbert (Toby Moncaster, 23/10/13)
* Simon Birrell (Toby Moncaster, 23/10/13)
* Theo Sanderson (Toby Moncaster, 23/10/13)
* Indy Wilkhu (Toby Moncaster, 23/10/13 - practical to come)
* John Campbell (Toby Moncaster, 30/10/13)
* Stephen Jeapes (Toby Moncaster, 30/10/13)
* Chris Stanley (Toby Moncaster, 30/10/13)
* Mat Greenwood (Toby Moncaster, 30/10/13)
* Jonathon Brookfield (Toby Moncaster, 30/10/13)
* Matt Grimes (Toby Moncaster, 30/10/13)
* Richard Fosh (Toby Moncaster, 30/10/13)
* Esther Leighton (Toby Moncaster, 30/10/13)
* Katia Dilks (Toby Moncaster, 21/11/13)
* Tim Dilks (Toby Moncaster, 21/11/13)
* Alexander MacFaden (Toby Moncaster, 21/11/13)
* Brian Starkey (Toby Moncaster, 21/11/13)
* Dave Potts (Martin de Selincourt, 4/12/13)
* Andy Spencer (Martin de Selincourt, 4/12/13)
* Jon Green (Martin de Selincourt, 4/12/13)
* Danny Garden (Martin de Selincourt, 4/12/13)
* Steve Wiseman (Martin de Selincourt, 4/12/13)
* Patrick Wollner (David Barham, 18/2/14)
* Leonardo Impett (David Barham, 18/2/14)
* Diana Probst (Brian Starkey, 19/3/14)
* Hidde-Jan Lemstra (Brian Starkey, 19/3/14)
* Francisco Cordobes (Brian Starkey, 19/3/14)
* Peter Ferguson (Mat Cook March 5 2014)
* Tim Hayward (Mat Cook March 5 2014)
* Jason White (Mat Cook March 5 2014)
* Stuart Wilson (Mat Cook March 5 2014)
* Steve Harrison (Mat Cook March 5 2014)
* Alex Atkinson (Mat Cook March 12 2014)
* Kate Aston (Mat Cook March 12 2014)
* Sheila Shepherd (Mat Cook March 12 2014)
* Rachel Bow (Mat Cook March 12 2014)
* Emyr James (Mat Cook March 12 2014)
* Peter Knight (Mat Cook March 12 2014)
* Andy Gale (Mat Cook March 26 2014)
* Owen McAree (Mat Cook March 26 2014)
* Michal Stefenow (Mat Cook March 26 2014)
* Neil Tan (Mat Cook March 26 2014)
* Vaiva Kalmkaite? (Mat Cook Apr 23 2014)
* Alberto Santos (Mat Cook Apr 23 2014)
* Sonny Siree (sp?) (Mat Cook Apr 23 2014)
* Tim Ronsell (Mat Cook Apr 23 2014)
* Rob Voisey (Mat Cook Apr 23 2014)
* Mike Hunter (Mat Cook Apr 23 2014)
* Tony Bunting (Brian Starkey 30/4/14)
* Eric Jones (Brian Starkey 30/4/14)
* Carl Phillips (Brian Starkey 30/4/14)
* Ed Ben (Brian Starkey 30/4/14)
* Toby Norman (Brian Starkey 30/4/14)
* Marco Galardini (Mat Cook May 7 2014)
* Thomas Keller (Mat Cook May 7 2014)
* Martin Lenz (Mat Cook 28 May 2014)
* David Grech (Mat Cook 28 May 2014)
* Rick Lupton (Mat Cook 28 May 2014)
* Tim Regan (Mat Cook 28 May 2014)
* Shashank Srinivasan (Mat Cook 28 May 2014)
* Al Napp (Mat Cook 4 June 2014)
* Tom Roberts (Mat Cook 4 June 2014)
* Matthew Taylor (Mat Cook 4 June 2014)
* Milosz Wasilewski (Mat Cook 4 June 2014)
* Matt Grimes (Brian Starkey 11/06/14)
* Brandon Invergo (Brian Starkey 11/06/14)
* Simon West (Brian Starkey 11/06/14)
* Kevin Rathbone (Brian Starkey 11/06/14)
* Richard Gordon (Brian Starkey 11/06/14)
* Rob Yates (Brian Starkey 12/07/14)
* Alex Gee (Brian Starkey 12/07/14)
* Patrick Beigent (Brian Starkey 12/07/14)
* Guilliame Tucker (Brian Starkey 12/07/14)
* Jo Brook (Brian Starkey 12/07/14)
* David Taylor (Brian Starkey 12/07/14)
* Joe Watson (Brian Starkey 23/07/14)
* Richard Armstrong (Brian Starkey 23/07/14)
* Eric Gowland (Brian Starkey 23/07/14)
* Paul Holland (Brian Starkey 23/07/14)
* Craig Richardson (Brian Starkey 23/07/14)

= Training Cheatsheet =

The training structure and prompt sheet. Please note, this is used by the Laser Cutter Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components
* Laser
* Cutting Mechanics
* Water Cooler System
* Filter
* PC
* Materials (what it can cut, supply)

Checks for everyone to do
* Check in use, looks ok
* Check water bath, temperature

Powering Up
* Turning on filter (Tick = ok, Warning = tell the owners, Cross = don't use it and tell the owners)
* Turning on Laser and warmup, what to do if doesn't power up
* Turning on PC and starting software

LaserCut Project walkthrough (using M+S+text keyring example)
* Package function, drawing, import file types
* Bed dimensions
* Paths, yellow dots, 'united' shapes
* Blue dot, Immediate mode
* Layers and colours
* Through cut, surface cut and engraving, speeds and strengths
* Various steps to build keyring design (shapes, text, uniting, layers, alignment, scaling, layers)
* Job ordering
* Saving
* Download as immediate, delete, download current

Laser Operation
* Lid
* Control panel, escape
* Moving head XY, indicator laser, datum
* Moving Z
* Focus
* Start position and test
* Start, pause and emergency stop function
* Do job, pause/open lid, restart

Laser Hazards
* Process and progression for normal operation failure (fire) - pause, open, move, CO2
* Process for abnormal operation failure (mechanical/jam) - emergency stop, open, move, CO2
* Ensure confident of process

Power Down
* Switch off laser
* Switch off filtration
* Clean any residue from the bed or bottom tray
* Close lid

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make a personalised focus tool
* Square acrylic of appropriate size
* Member's name, "Focus Tool", keychain hole
* Should use full cut, surface cut, engrave
* Should demonstrate all steps, size, appropriate ordering, positioning

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to lasering (watch carefully all steps)
* Ask to stop job/restart, question escalation process

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)

Equipment/Laser Cutter

2014-09-16T14:16:49Z

Stevancw: /* Trainers */

{{RedTool}}

[[Equipment|Equipment]] / Laser Cutter

[[File:Makespace-laser-cutter.JPG|thumb|460px|right|Our LS6090 PRO Laser Cutter]]

= Summary =

This is our LS 6090 PRO Laser Cutter. It has a working area of 900mm by 600mm, and is powered by a 60w CO2 Water Cooled Laser Tube that can engrave and cut through materials such as wood, plastic, card, leather, fabrics, up to about 10-15mm thick (note, it can not cut metal). The laser cut is approximately 0.15mm wide, and a job can take a few seconds through to tens of minutes depending on material thickness and design complexity.

We have a dedicated PC running LaserCut 5.3 software to import, prepare and download jobs to the Laser Cutter. It can import various formats, with DXF being the most commonly used, so various software packages can be used to create your designs.

Here are some examples of laser jobs we've run (please add a photo of yours any time you do a job!)

<gallery>
File:Laser-cut-focus-tool.JPG
File:Laser-cut-front-panels.JPG
File:Laser-cut-lizards.JPG
File:Laser-cut-m-and-s.JPG
File:Laser-cut-model-building.JPG
File:Laser-cut-ply-m.JPG
File:Laser_output_-_makespace_arrow.JPG
File:Laser_box.jpg
File:Croc-small.jpg
File:LaserCutter_Jobs_1.jpg
File:LaserCutterGallery_20130328.jpg
File:LasercutSettlers.jpg
File:Wolfstock1.jpg
File:Mug-holder.jpg
File:2013-10-21 20.10.06.jpg
File:Indy jigster.png
</gallery>

= Using the Laser Cutter =

The laser cutter is a great way to easily produce accurate and complex 2D forms in various materials, and can be designed for with limited experience in various drawing or CAD applications. At the same time, it is an expensive tool with real risk of injury and fire, so is very important you know how to use it to avoid damaging yourself and the machine. '''You must only use the laser cutter if you have been trained, and if you are ever in any doubt about something, please ask for assistance.'''

== Owners ==

The Owners are those who have volunteered to be in charge of the laser cutter, organising maintenance, responding to technical issues and generally being a point of contact. The current Owners of the Laser Cutter are:

* [[User:Simon|Simon Ford]]
* [[User:Barhamd|David Barham]]
* [[User:Nickcadsoftuk|Nick Johnson]]
* [[User:Tmonca|Toby Moncaster]]
* [[User:Mat-C|Mat Cook]]
* [[User:DianaProbst|Diana Probst]]
* Owen Woods
* [[User:stevancw|Stevan Wing]]

== Trainers ==

The Trainers are those who have volunteered to teach others to use the laser cutter and to promote good working practice. The current Trainers for the Laser Cutter are:

* [[User:Simon|Simon Ford]]
* [[User:Barhamd|David Barham]]
* [[User:Nickcadsoftuk|Nick Johnson]]
* [[User:Tmonca|Toby Moncaster]]
* Martin de Selincourt
* [[User:Mat-C|Mat Cook]]
* Brian Starkey
* [[User:stevancw|Stevan Wing]]

If you have any questions, problems or concerns around the laser cutter, please use the forum page:
* [http://makespace.org/forum/viewtopic.php?f=19&t=45 Laser Cutter Log]

For the old mailing list thread see here:
* [https://groups.google.com/d/topic/cammakespace/Tmce2iKVzD8/discussion Log : Laser Cutter]

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>YOU CAN ONLY USE THE LASER CUTTER IF YOU HAVE BEEN TRAINED</b><br>
and have been added to the [[Equipment/Laser_Cutter/Training#Trained_Users|Trained Users]] list by one of the Owners
</div>

To get trained on the laser cutter and be added to the qualified user list, you will need to arrange for a training session with one of the Laser Cutter Owners.

If you'd like to arrange training, please see:
* [[Equipment/Laser_Cutter/Training|Laser Cutter Training]]

== Health and Safety ==

The laser cutter is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the laser cutter are:
* '''ONLY USE THE LASER CUTTER IF YOU ARE ON THE LIST OF TRAINED USERS'''
* '''NEVER LEAVE THE LASER CUTTER RUNNING UNATTENDED'''
* '''KNOW WHAT TO DO IF A FIRE BREAKS OUT'''
* '''NEVER CUT MATERIALS THAT YOU DON'T KNOW ARE SAFE'''

As a trained user, you should be very aware of the following risks and how to deal with them:

'''FIRE (under normal operation)''' - Cutting at the wrong speed or the wrong power can result in the material igniting
* You must watch the cutter at all times and be prepared to abort the job if problems occur
* Small flashes of flame that don't hang around for a fraction of a second are acceptable, but any more is rare and not acceptable
* If a fire does take, this is the process you should follow (from minor to major):
** Press "pause" (the same button you started the job with) - This will turn the laser off so no more heat enters, and assuming the flame goes out, you can press "start" for the job to continue where it left off
** Open the lid - With the job paused, you can open the lid to blow out the flame. Again, it is possible to re-close the lid and continue where you left off
** Move the material from under the laser head assuming safe to do so (so it doesn't damage the optics; alternatively send the laser to home/datum), and smother with a spare sheet of material or blow out
** Use the workshop CO2 extinguisher to extinguish the flame
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

'''FIRE (abnormal operation)''' - If the head gets stuck or something else goes wrong, ignition could happen much more suddenly or intensely
* You must watch the cutter at all times and be prepared to abort the job if problems occur
* If the head gets trapped (e.g. tomb-stoning of a piece, mechanical failure) or any other problem occurs that causes or could cause fire, this is the process you should follow:
** Hit the emergency stop
** Open the lid and move the material from under the laser head assuming safe to do so (so it doesn't damage the optics)
** Blow out, smother with a spare sheet of material, or use the CO2 extinguisher to extinguish the flame as appropriate
* Ensure a Maintainer looks at the machine before it is brought back in to action if it is not obvious what went wrong and all is ok
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

'''FUMES''' - The laser cutting process will release different smoke and fumes depending on the material.
* Never cut PVC or a material you are not sure is safe. When PVC is heated it releases chlorine gas, this mixes with the moisture in the air and the result is hydrochloric acid which is toxic to humans and corrosive to machines.
* Ensure the filter is on and the cutter lid stays closed for a while after a job to allow the fumes to clear.
* If you are feeling strange, think the fume build up is too much, or for any other reason you are unsure, stop the job.

'''TRAPPING''' - The head and bed of the cutter can be moved by the front panel menu or programs in the machines memory.
* Be careful when working inside the cutting area or with the lid open not to trap hands, hair, clothing or anything else.
* Always check the machine for unexpected items that may have fallen in before closing the lid.
* Do not attempt to climb into the machine!

'''LASER BURNS/LIGHT''' - A 60W laser can do real damage.
* The laser should be safe within the confines of the machine, and cut-off automatically when the lid is open (although this should not be relied upon). The top window is safe to look through during a job, but do not attempt to interfere with these windows or the laser or in any way invent some way to look at the laser.
* Do not tamper with the laser cutter, or any interlocks. All side panels of the laser should always be closed and locked whilst the machine is plugged in.
* Do not put metal in the laser cutter.

== Can I cut it? ==

*Woody things
** Wood: yes! (be careful of fire)
** Plywood: yes if it is "laser ply". Normal plywood has non-laser compatible glue
** MDF: no. Clogs up our filters and smells bad.
** LaserMDF: no. It produces perhaps 50% the gunk of MDF but still too much.
** Cork: yes. Let us know how it goes!

*Plasticy things
** Acrylic / Perspex: yes!
** PVC/Vinyl: absolutely not. Produces chlorine.
** Silicone: we tried it with very limited success. A mm or two perhaps, anything else chars and doesn't cut.
** Delrin/Acetal: yes with great care.
** Teflon: no (it is toxic)
** Nylon: no (consult an owner)
** Polythene/polyethylene: no (consult an owner)
** Lexan/Polycarbonate: no (consult an owner)
** Polypropylene: yes just. You must clean the bed. It will cut up to about 2mm. It's not a great quality cut, but just about doable. Fire risk.

*Papery things
** Card/Paper: yes! (be careful of fire)
** Tissue: yes if super super really careful (be REALLY careful of fire, have emergency procedure in place before you start)

*Metally things
** Metal of any thickness doesn't cut. Depending on the metal you may be able to engrave the surface.

*Exotics
** Fibre glass: no (unknown resin, glass particles)
** Carbon Fibre: no
** Slate: engravable for good effect

Good list of info here: http://inventionstudio.gatech.edu/wiki/Laser_cutter

== Instructions ==

To use the laser cutter, you must have been trained and have had your name added to the trained user list; these instructions are not a substitute for this training. See the training section to understand how you can become qualified to use the laser cutter.

Although not a requirement, it is recommended someone else trained is also present when using the laser cutter. Having two pairs of eyes helps avoid forgotten steps, allows for double checking, clarifications and discussions, and ensures a greater pool of experience is both present and being built up as the laser is used.

'''Power Up'''

Give the machine a quick visual check. Make sure that there is nothing left on the bed, the water reservoir of the chiller looks normal, and that the equipment has no obvious damage or signs of being out-of-action. If the bed looks like it has residue on it, give it a wipe with IPA and a cloth.

Turn on primary switch on the trunking marked 'Laser'. The air filter system to the right of the laser cutter should start as should the air pump and the chiller. It should power up, make a decent amount of noise, and the lights should indicate the filter is in good condition (i.e. no need for replacement).

Make sure the lid is closed. Turn on the laser using the key on the right hand side. The inspection lamp should come on, a satisfying hum start up, and the cutter go into doing its self-checks.

Before doing any job, the laser should be left to warm up for 4-5 mins. While the machine warms up, power on the adjacent PC and start the LaserCut application from the desktop. During this time the water temperature shown on the chiller should drop from ambient temperature to the usual setting of 18C.

'''Load your Design'''

The PC software has an import facility which seems to be happy taking AutoCAD 2004 DXF files and other formats. The workspace of the laser bed is represented as the workarea in the LaserCut software. If the import doesn't do what you want size-wise, you can select the whole image and then use the 'size' command from the drop down menu to set the dimension you want. Clicking on the three dots ... symbol will adjust the other axis in the same proportion (keeping the aspect ratio fixed). Selecting the 'centre on bed' option will locate your imported drawing on the centre of the machine's cutting bed.

'''Assign Settings to Colours'''

Each part of your drawing that is assigned a different colour can have a different cut action assigned. Each colour will appear on the menu on the right hand side of the screen with numbers related to power and speed of the laser which will be used for the colour.

The main options are to Cut (line) or Engrave (raster fill). A marking on the material is a Cut. For each material and cutting depth required, a corresponding speed and power must be entered. The handbook provided with the machine gives suggested values for various materials but these should be considered as a starting point for a test. See the '''Power and Speed Settings''' section for our guidelines and experiences for these settings.

'''Download to the Cutter'''

Your drawing will feature a blue dot which represents the starting point of the laser; this is by default on the top right corner. In general, you will want to use "immediate" mode, which means this point represents wherever the laser is positioned when you start the job. You can also run the job in absolute mode by unchecking the box, making the job use absolute positioning on the workspace.

To download, select Download and Download Current; the download option will by default call the file on the laser cutter 'LASER'.

'''Set the Focus'''

Before each job, the focus needs to be checked and set by adjusting the height of the bed, and thus the work piece, from the lens. The critical dimension here is 41mm and several gauges made of perspex will be left around the machine. This gauge needs to be a fit between the top surface of the material you intend to cut and the white plastic 'flap' on the lens piece. The height of the table is adjusted using the UP and DOWN buttons. Failure to set the distance correctly will result in an out of focus laser and much bigger (but lower powered) cut line. Always ensure there is clearance between the material and laser head before the head moves.

'''Aligning and Testing the Job'''

The cutter's menu will show the most recent downloaded file highlighted. Pressing the 'test' button will make the head travel along the square maximum extends of the cuts. This shows you that you have the material in the right place, and you have enough of it! You can do this repeatedly, moving the work piece by hand or the laser head using the arrow keys (after hitting ESC), until you are confident you have things where you want them.

'''Cut the Job'''

When happy with the location of the material, close the lid and press 'start' to start the cutter. Watch the head and at least at first be prepared to press the 'stop' button immediately if you find you are burning massive holes in your work piece! This goes back to doing some tests on a sample of your material and making sure you are happy with the cut speeds and power you have selected. You should stay near the cutter at all times and be prepared to pause it or stop it in the event of fire.

<span style="color:red">'''DO NOT EVER LEAVE THE CUTTER UNATTENDED'''</span>

'''Finishing'''

The end of the job is signified by a beep. Waiting a few moments for the exhaust pump to clear any remaining smoke is a good idea, especially with wood, and will limit the build up of smells in the rest of the workshop. Remove your work piece, ensuring that all parts are cleared from the bed of the machine.

'''Power Down'''

The cutter is turned off using the key switch, then the air filtering system with the green rocker switch. Shut down the PC and double check that everything is left in a safe state for the next user.

'''Clean the bed of debris using the soft brush, then wipe down the bed using IPA and a cloth.'''

If you have been cutting particularly 'dirty' materials, most notable MDF and Ply which leave a sticky residue then you will need to use the course side of one of the oven pads and lots of 'elbow grease'. Residue on the bed can impact the next persons' job so please make the effort to clean up and leave the cutter as you would wish to find it.

Go away excited by what you can make and come back with lots more drawings!

== Power and Speed Settings ==

In due time we will try to build up a large sample stock of materials and record the values which work best. Here are the sample material tests we have so far:

<gallery>
File:Laser-schmoo-3mm-acrylic.JPG|3mm Acrylic
File:Laser-schmoo-10mm-acrylic.JPG|10mm Acrylic
File:Laser-schmoo-9mm-mdf.JPG|9mm MDF (note: do not cut MDF - see above!)
</gallery>

== Tips & Tricks ==

* If the laser cutter's user interface does not seem to respond/do what you want, hit "ESC" to return to 'normal mode'.
* The opaque white acrylic needs slightly stronger settings for surface cuts as they are not as visible as in the transparent acrylic (i.e., for similar effect you need a deeper cut). Otherwise seems to cut equivalently to transparent acrylics.
* If you want a tight fit of pieces or very accurate sizing, keep in mind that the laser beam has a width of just over 0.1 mm (maybe 0.11 or 0.12 mm). So all exterior cut lines should be offset by 0.05 mm; you can do this very easily in the LaserCutter Software with the "Offset" tool (units are in mm, so enter '0.05' and select 'Outer').
* The DXF file format stores values only (not values and units). The internal units in the LaserCutter are in mm. If you set your document's units to mm in the exporting CAD system it should work fine, but generally it is a good idea to have a piece of geometry of known length, e.g. a line 100mm long, or a box of known size around your design. This makes adjusting the scaling a lot easier.
* If you want to export a DXF from Inkscape (which is a great, free vector drawing package), then make sure you do "Object to path" from the Path menu for the whole object and then during the export stage, enable "use ROBO-Master type of spline output". This should make sure all the curves and so on work.
* There's now a page to help with Inkscape and our laser at [[Equipment/Laser_Cutter_Inkscape]]
* If the jog buttons (arrow keys moving the laser head around) are only moving the head in small single steps rather than moving it continuously, make sure that the jog step size is set to 0.0mm in the Jog Settings section of the menu.

== Material Stock ==
If you have any requests for material stock, please add them the [[Equipment/Laser_Cutter_Stock|Laser cutter stock]] page.

= Maintenance =

The maintenance of the Laser Cutter is carried out by the Owners, with some basic maintenance being carried out by Users on every job.

== Maintenance Schedule ==

Continuous Maintenance ('''Every job, done by all Laser Cutter Users''')
* Clean the laser bed with IPA and cloth or Swarfega wipes
* Clean any debris off laser bed and surround using soft brush

Basic Maintenance (Every week, done by Laser Cutter Maintainers)
* Clean the laser lens with IPA and cotton buds
* Oil the 3 runners with 3-in-one light oil
* Thoroughly clean the laser bed with IPA and cloth
* Check the water level in the cooling tank
* Clean and remove debris from the machine base and catchment drawer

Full Maintenance (Every 4 weeks, done by Laser Cutter Maintainers)
* Check the water is clean in the cooling tank (i.e. no contamination/organic build up)
* Check filter unit for filter renewal
* Oil the 4 rise and fall lead screws with 3-in-one light oil
* Check mirrors and clean with a disposable sachet lens cleaner cloth (only if needed, mirror coatings are delicate)
* Work through mirror alignment procedure to check alignment of mirrors

== Maintenance Log ==

'''Reactive Maintenance'''
* 15th Jan 2013, Simon Ford: Laser cutter not powering up, with switching on via key gives no activity whatsoever. No recollection of it cutting out during a job (Alexis), so assume it just stopped turning on at some point. Filter box and power sockets confirmed OK. Diagnosis: RCD in right back panel of Laser reset to off, no obvious reason why. Switching back on brought everything back to life OK.
* 22nd, Simon Ford; 29th, Nicholas - same again.

* Apr 2014, Mat Cook and Diana Probst: after previous changing of chiller water (Roger et al) the pump was complaining of lack of flow. Changed water and filtered, removed small blockage from rubber hose on laser tube.

* 16 Apr 2014, Toby and Diana: changed laser tube, refilled chiller. Laser cutter fully working.

'''Regular Maintenance'''
* Week Number, Date, Type, Owner (Notes)

2013
* January 7, Full, Chris @ HPCLaser'''
* January 14, Basic, Simon Ford
* January 21, Full, Simon Ford (running better than new :)'''
* ...various maintenance events happened...
* April 5th, Full, Simon Ford
* July 1st, Full, David Barham (realigned mirrors)
* July 15th, installed chiller

2014
* 16 Apr 2014, mirror alignment and optics checked after re-installation of tube. All fine. Toby and Diana.
* 19 May 2014, mirrors cleaned, earthing wire on lid tightened. Diana (and Mat's screwdriver)
* 21 May 2014, cleaned lens with Mat Cook. Diana
* 02 Jun 2014, removed and cleaned laser bed
* 14 Sep 2014, cleaned lens and mirrors, realigned. Diana and Brian Starkey

* 30 Jun 2014 Fitted microswitches in series with the magnetic "lid closed" detector. Magnetic detector still in operation, but with additional cutouts in series. (ie Magnetic open OR left side open OR right side open).
Risk assessment: increase in lid safety because it's in series with existing system. Tested that each detector individually will cut out the laser. Low electrical risk (low voltage and not near fingers). Mechanical components designed to not be sharp / protruding overly.
This additional system can be bypassed by determined operators and the reliability of the exiting cutout system is unknown although presumed to be reliable. We feel that the microswitches are an additional safety layer and no existing safety system is compromised. We do not believe there is any additional "perceived safety" causing more risky user behaviour.
The microswitches are operated by plastic affixed to the lid. The position/depth of these may need to be adjusted with time.

== Maintenance Shopping List ==

* 3-in-one light oil
* Cotton Buds
* Lens cleaner sachets
* Soft paint/cleaning brush
* Thermometer for water tank
* Hand held CO2 extinguisher

= Further Information =

* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser Product Page]
* [http://hpclaser.co.uk/index.php?main_page=page&id=5&chapter=2 HPCLaser Technical Info]
* [http://www.laserscript.co.uk/phpBB3/ Laserscript Forum]

LaserCut 5.3
* [http://www.leetro.com/english/sale/35.html Homepage]
* [http://www.leetro.com/english/down/LaserCut5.3%20Manual%20V1.6.pdf Manual]

== Installation ==

<gallery>
File:Laser_-_van.JPG
File:Makespace-laser-install-02.JPG
File:Laser_-_building_2.JPG
File:Laser_-_building.JPG
</gallery>

== Purchase ==

Full Purchase, Delivery and Installation (£6865.00+vat = £8238.00)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser engraving and cutting machine, 600mm by 900mm 60W] (£5250.00+vat)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=34 Laser Fume Filter] (£1250.00+vat)
* Delivery (£190+vat)
* Installation/Training (£175+vat)

== Repairs ==

We expect to have to change the following parts for general maintenance:
* The laser tube (guess every 6-12 months)
* The filter (guess every 3-6 months)
* The optics (guess every 6-12 months)

Maintenance and Spares:
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=3 60 watt C02 laser tube] (£275.00+vat)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=12 50 mm Focus Meniscus Lens] (£75.00+vat)
* Estimate for Call Out (£200.00)

Equipment/Laser Cutter

2014-09-16T14:16:11Z

Stevancw: /* Owners */

{{RedTool}}

[[Equipment|Equipment]] / Laser Cutter

[[File:Makespace-laser-cutter.JPG|thumb|460px|right|Our LS6090 PRO Laser Cutter]]

= Summary =

This is our LS 6090 PRO Laser Cutter. It has a working area of 900mm by 600mm, and is powered by a 60w CO2 Water Cooled Laser Tube that can engrave and cut through materials such as wood, plastic, card, leather, fabrics, up to about 10-15mm thick (note, it can not cut metal). The laser cut is approximately 0.15mm wide, and a job can take a few seconds through to tens of minutes depending on material thickness and design complexity.

We have a dedicated PC running LaserCut 5.3 software to import, prepare and download jobs to the Laser Cutter. It can import various formats, with DXF being the most commonly used, so various software packages can be used to create your designs.

Here are some examples of laser jobs we've run (please add a photo of yours any time you do a job!)

<gallery>
File:Laser-cut-focus-tool.JPG
File:Laser-cut-front-panels.JPG
File:Laser-cut-lizards.JPG
File:Laser-cut-m-and-s.JPG
File:Laser-cut-model-building.JPG
File:Laser-cut-ply-m.JPG
File:Laser_output_-_makespace_arrow.JPG
File:Laser_box.jpg
File:Croc-small.jpg
File:LaserCutter_Jobs_1.jpg
File:LaserCutterGallery_20130328.jpg
File:LasercutSettlers.jpg
File:Wolfstock1.jpg
File:Mug-holder.jpg
File:2013-10-21 20.10.06.jpg
File:Indy jigster.png
</gallery>

= Using the Laser Cutter =

The laser cutter is a great way to easily produce accurate and complex 2D forms in various materials, and can be designed for with limited experience in various drawing or CAD applications. At the same time, it is an expensive tool with real risk of injury and fire, so is very important you know how to use it to avoid damaging yourself and the machine. '''You must only use the laser cutter if you have been trained, and if you are ever in any doubt about something, please ask for assistance.'''

== Owners ==

The Owners are those who have volunteered to be in charge of the laser cutter, organising maintenance, responding to technical issues and generally being a point of contact. The current Owners of the Laser Cutter are:

* [[User:Simon|Simon Ford]]
* [[User:Barhamd|David Barham]]
* [[User:Nickcadsoftuk|Nick Johnson]]
* [[User:Tmonca|Toby Moncaster]]
* [[User:Mat-C|Mat Cook]]
* [[User:DianaProbst|Diana Probst]]
* Owen Woods
* [[User:stevancw|Stevan Wing]]

== Trainers ==

The Trainers are those who have volunteered to teach others to use the laser cutter and to promote good working practice. The current Trainers for the Laser Cutter are:

* [[User:Simon|Simon Ford]]
* [[User:Barhamd|David Barham]]
* [[User:Nickcadsoftuk|Nick Johnson]]
* [[User:Tmonca|Toby Moncaster]]
* Martin de Selincourt
* [[User:Mat-C|Mat Cook]]
* Brian Starkey

If you have any questions, problems or concerns around the laser cutter, please use the forum page:
* [http://makespace.org/forum/viewtopic.php?f=19&t=45 Laser Cutter Log]

For the old mailing list thread see here:
* [https://groups.google.com/d/topic/cammakespace/Tmce2iKVzD8/discussion Log : Laser Cutter]

== Training ==

<div style="background:#FADADD; border:1px solid #FFC0CB; padding:5px">
<b>YOU CAN ONLY USE THE LASER CUTTER IF YOU HAVE BEEN TRAINED</b><br>
and have been added to the [[Equipment/Laser_Cutter/Training#Trained_Users|Trained Users]] list by one of the Owners
</div>

To get trained on the laser cutter and be added to the qualified user list, you will need to arrange for a training session with one of the Laser Cutter Owners.

If you'd like to arrange training, please see:
* [[Equipment/Laser_Cutter/Training|Laser Cutter Training]]

== Health and Safety ==

The laser cutter is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the laser cutter are:
* '''ONLY USE THE LASER CUTTER IF YOU ARE ON THE LIST OF TRAINED USERS'''
* '''NEVER LEAVE THE LASER CUTTER RUNNING UNATTENDED'''
* '''KNOW WHAT TO DO IF A FIRE BREAKS OUT'''
* '''NEVER CUT MATERIALS THAT YOU DON'T KNOW ARE SAFE'''

As a trained user, you should be very aware of the following risks and how to deal with them:

'''FIRE (under normal operation)''' - Cutting at the wrong speed or the wrong power can result in the material igniting
* You must watch the cutter at all times and be prepared to abort the job if problems occur
* Small flashes of flame that don't hang around for a fraction of a second are acceptable, but any more is rare and not acceptable
* If a fire does take, this is the process you should follow (from minor to major):
** Press "pause" (the same button you started the job with) - This will turn the laser off so no more heat enters, and assuming the flame goes out, you can press "start" for the job to continue where it left off
** Open the lid - With the job paused, you can open the lid to blow out the flame. Again, it is possible to re-close the lid and continue where you left off
** Move the material from under the laser head assuming safe to do so (so it doesn't damage the optics; alternatively send the laser to home/datum), and smother with a spare sheet of material or blow out
** Use the workshop CO2 extinguisher to extinguish the flame
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

'''FIRE (abnormal operation)''' - If the head gets stuck or something else goes wrong, ignition could happen much more suddenly or intensely
* You must watch the cutter at all times and be prepared to abort the job if problems occur
* If the head gets trapped (e.g. tomb-stoning of a piece, mechanical failure) or any other problem occurs that causes or could cause fire, this is the process you should follow:
** Hit the emergency stop
** Open the lid and move the material from under the laser head assuming safe to do so (so it doesn't damage the optics)
** Blow out, smother with a spare sheet of material, or use the CO2 extinguisher to extinguish the flame as appropriate
* Ensure a Maintainer looks at the machine before it is brought back in to action if it is not obvious what went wrong and all is ok
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

'''FUMES''' - The laser cutting process will release different smoke and fumes depending on the material.
* Never cut PVC or a material you are not sure is safe. When PVC is heated it releases chlorine gas, this mixes with the moisture in the air and the result is hydrochloric acid which is toxic to humans and corrosive to machines.
* Ensure the filter is on and the cutter lid stays closed for a while after a job to allow the fumes to clear.
* If you are feeling strange, think the fume build up is too much, or for any other reason you are unsure, stop the job.

'''TRAPPING''' - The head and bed of the cutter can be moved by the front panel menu or programs in the machines memory.
* Be careful when working inside the cutting area or with the lid open not to trap hands, hair, clothing or anything else.
* Always check the machine for unexpected items that may have fallen in before closing the lid.
* Do not attempt to climb into the machine!

'''LASER BURNS/LIGHT''' - A 60W laser can do real damage.
* The laser should be safe within the confines of the machine, and cut-off automatically when the lid is open (although this should not be relied upon). The top window is safe to look through during a job, but do not attempt to interfere with these windows or the laser or in any way invent some way to look at the laser.
* Do not tamper with the laser cutter, or any interlocks. All side panels of the laser should always be closed and locked whilst the machine is plugged in.
* Do not put metal in the laser cutter.

== Can I cut it? ==

*Woody things
** Wood: yes! (be careful of fire)
** Plywood: yes if it is "laser ply". Normal plywood has non-laser compatible glue
** MDF: no. Clogs up our filters and smells bad.
** LaserMDF: no. It produces perhaps 50% the gunk of MDF but still too much.
** Cork: yes. Let us know how it goes!

*Plasticy things
** Acrylic / Perspex: yes!
** PVC/Vinyl: absolutely not. Produces chlorine.
** Silicone: we tried it with very limited success. A mm or two perhaps, anything else chars and doesn't cut.
** Delrin/Acetal: yes with great care.
** Teflon: no (it is toxic)
** Nylon: no (consult an owner)
** Polythene/polyethylene: no (consult an owner)
** Lexan/Polycarbonate: no (consult an owner)
** Polypropylene: yes just. You must clean the bed. It will cut up to about 2mm. It's not a great quality cut, but just about doable. Fire risk.

*Papery things
** Card/Paper: yes! (be careful of fire)
** Tissue: yes if super super really careful (be REALLY careful of fire, have emergency procedure in place before you start)

*Metally things
** Metal of any thickness doesn't cut. Depending on the metal you may be able to engrave the surface.

*Exotics
** Fibre glass: no (unknown resin, glass particles)
** Carbon Fibre: no
** Slate: engravable for good effect

Good list of info here: http://inventionstudio.gatech.edu/wiki/Laser_cutter

== Instructions ==

To use the laser cutter, you must have been trained and have had your name added to the trained user list; these instructions are not a substitute for this training. See the training section to understand how you can become qualified to use the laser cutter.

Although not a requirement, it is recommended someone else trained is also present when using the laser cutter. Having two pairs of eyes helps avoid forgotten steps, allows for double checking, clarifications and discussions, and ensures a greater pool of experience is both present and being built up as the laser is used.

'''Power Up'''

Give the machine a quick visual check. Make sure that there is nothing left on the bed, the water reservoir of the chiller looks normal, and that the equipment has no obvious damage or signs of being out-of-action. If the bed looks like it has residue on it, give it a wipe with IPA and a cloth.

Turn on primary switch on the trunking marked 'Laser'. The air filter system to the right of the laser cutter should start as should the air pump and the chiller. It should power up, make a decent amount of noise, and the lights should indicate the filter is in good condition (i.e. no need for replacement).

Make sure the lid is closed. Turn on the laser using the key on the right hand side. The inspection lamp should come on, a satisfying hum start up, and the cutter go into doing its self-checks.

Before doing any job, the laser should be left to warm up for 4-5 mins. While the machine warms up, power on the adjacent PC and start the LaserCut application from the desktop. During this time the water temperature shown on the chiller should drop from ambient temperature to the usual setting of 18C.

'''Load your Design'''

The PC software has an import facility which seems to be happy taking AutoCAD 2004 DXF files and other formats. The workspace of the laser bed is represented as the workarea in the LaserCut software. If the import doesn't do what you want size-wise, you can select the whole image and then use the 'size' command from the drop down menu to set the dimension you want. Clicking on the three dots ... symbol will adjust the other axis in the same proportion (keeping the aspect ratio fixed). Selecting the 'centre on bed' option will locate your imported drawing on the centre of the machine's cutting bed.

'''Assign Settings to Colours'''

Each part of your drawing that is assigned a different colour can have a different cut action assigned. Each colour will appear on the menu on the right hand side of the screen with numbers related to power and speed of the laser which will be used for the colour.

The main options are to Cut (line) or Engrave (raster fill). A marking on the material is a Cut. For each material and cutting depth required, a corresponding speed and power must be entered. The handbook provided with the machine gives suggested values for various materials but these should be considered as a starting point for a test. See the '''Power and Speed Settings''' section for our guidelines and experiences for these settings.

'''Download to the Cutter'''

Your drawing will feature a blue dot which represents the starting point of the laser; this is by default on the top right corner. In general, you will want to use "immediate" mode, which means this point represents wherever the laser is positioned when you start the job. You can also run the job in absolute mode by unchecking the box, making the job use absolute positioning on the workspace.

To download, select Download and Download Current; the download option will by default call the file on the laser cutter 'LASER'.

'''Set the Focus'''

Before each job, the focus needs to be checked and set by adjusting the height of the bed, and thus the work piece, from the lens. The critical dimension here is 41mm and several gauges made of perspex will be left around the machine. This gauge needs to be a fit between the top surface of the material you intend to cut and the white plastic 'flap' on the lens piece. The height of the table is adjusted using the UP and DOWN buttons. Failure to set the distance correctly will result in an out of focus laser and much bigger (but lower powered) cut line. Always ensure there is clearance between the material and laser head before the head moves.

'''Aligning and Testing the Job'''

The cutter's menu will show the most recent downloaded file highlighted. Pressing the 'test' button will make the head travel along the square maximum extends of the cuts. This shows you that you have the material in the right place, and you have enough of it! You can do this repeatedly, moving the work piece by hand or the laser head using the arrow keys (after hitting ESC), until you are confident you have things where you want them.

'''Cut the Job'''

When happy with the location of the material, close the lid and press 'start' to start the cutter. Watch the head and at least at first be prepared to press the 'stop' button immediately if you find you are burning massive holes in your work piece! This goes back to doing some tests on a sample of your material and making sure you are happy with the cut speeds and power you have selected. You should stay near the cutter at all times and be prepared to pause it or stop it in the event of fire.

<span style="color:red">'''DO NOT EVER LEAVE THE CUTTER UNATTENDED'''</span>

'''Finishing'''

The end of the job is signified by a beep. Waiting a few moments for the exhaust pump to clear any remaining smoke is a good idea, especially with wood, and will limit the build up of smells in the rest of the workshop. Remove your work piece, ensuring that all parts are cleared from the bed of the machine.

'''Power Down'''

The cutter is turned off using the key switch, then the air filtering system with the green rocker switch. Shut down the PC and double check that everything is left in a safe state for the next user.

'''Clean the bed of debris using the soft brush, then wipe down the bed using IPA and a cloth.'''

If you have been cutting particularly 'dirty' materials, most notable MDF and Ply which leave a sticky residue then you will need to use the course side of one of the oven pads and lots of 'elbow grease'. Residue on the bed can impact the next persons' job so please make the effort to clean up and leave the cutter as you would wish to find it.

Go away excited by what you can make and come back with lots more drawings!

== Power and Speed Settings ==

In due time we will try to build up a large sample stock of materials and record the values which work best. Here are the sample material tests we have so far:

<gallery>
File:Laser-schmoo-3mm-acrylic.JPG|3mm Acrylic
File:Laser-schmoo-10mm-acrylic.JPG|10mm Acrylic
File:Laser-schmoo-9mm-mdf.JPG|9mm MDF (note: do not cut MDF - see above!)
</gallery>

== Tips & Tricks ==

* If the laser cutter's user interface does not seem to respond/do what you want, hit "ESC" to return to 'normal mode'.
* The opaque white acrylic needs slightly stronger settings for surface cuts as they are not as visible as in the transparent acrylic (i.e., for similar effect you need a deeper cut). Otherwise seems to cut equivalently to transparent acrylics.
* If you want a tight fit of pieces or very accurate sizing, keep in mind that the laser beam has a width of just over 0.1 mm (maybe 0.11 or 0.12 mm). So all exterior cut lines should be offset by 0.05 mm; you can do this very easily in the LaserCutter Software with the "Offset" tool (units are in mm, so enter '0.05' and select 'Outer').
* The DXF file format stores values only (not values and units). The internal units in the LaserCutter are in mm. If you set your document's units to mm in the exporting CAD system it should work fine, but generally it is a good idea to have a piece of geometry of known length, e.g. a line 100mm long, or a box of known size around your design. This makes adjusting the scaling a lot easier.
* If you want to export a DXF from Inkscape (which is a great, free vector drawing package), then make sure you do "Object to path" from the Path menu for the whole object and then during the export stage, enable "use ROBO-Master type of spline output". This should make sure all the curves and so on work.
* There's now a page to help with Inkscape and our laser at [[Equipment/Laser_Cutter_Inkscape]]
* If the jog buttons (arrow keys moving the laser head around) are only moving the head in small single steps rather than moving it continuously, make sure that the jog step size is set to 0.0mm in the Jog Settings section of the menu.

== Material Stock ==
If you have any requests for material stock, please add them the [[Equipment/Laser_Cutter_Stock|Laser cutter stock]] page.

= Maintenance =

The maintenance of the Laser Cutter is carried out by the Owners, with some basic maintenance being carried out by Users on every job.

== Maintenance Schedule ==

Continuous Maintenance ('''Every job, done by all Laser Cutter Users''')
* Clean the laser bed with IPA and cloth or Swarfega wipes
* Clean any debris off laser bed and surround using soft brush

Basic Maintenance (Every week, done by Laser Cutter Maintainers)
* Clean the laser lens with IPA and cotton buds
* Oil the 3 runners with 3-in-one light oil
* Thoroughly clean the laser bed with IPA and cloth
* Check the water level in the cooling tank
* Clean and remove debris from the machine base and catchment drawer

Full Maintenance (Every 4 weeks, done by Laser Cutter Maintainers)
* Check the water is clean in the cooling tank (i.e. no contamination/organic build up)
* Check filter unit for filter renewal
* Oil the 4 rise and fall lead screws with 3-in-one light oil
* Check mirrors and clean with a disposable sachet lens cleaner cloth (only if needed, mirror coatings are delicate)
* Work through mirror alignment procedure to check alignment of mirrors

== Maintenance Log ==

'''Reactive Maintenance'''
* 15th Jan 2013, Simon Ford: Laser cutter not powering up, with switching on via key gives no activity whatsoever. No recollection of it cutting out during a job (Alexis), so assume it just stopped turning on at some point. Filter box and power sockets confirmed OK. Diagnosis: RCD in right back panel of Laser reset to off, no obvious reason why. Switching back on brought everything back to life OK.
* 22nd, Simon Ford; 29th, Nicholas - same again.

* Apr 2014, Mat Cook and Diana Probst: after previous changing of chiller water (Roger et al) the pump was complaining of lack of flow. Changed water and filtered, removed small blockage from rubber hose on laser tube.

* 16 Apr 2014, Toby and Diana: changed laser tube, refilled chiller. Laser cutter fully working.

'''Regular Maintenance'''
* Week Number, Date, Type, Owner (Notes)

2013
* January 7, Full, Chris @ HPCLaser'''
* January 14, Basic, Simon Ford
* January 21, Full, Simon Ford (running better than new :)'''
* ...various maintenance events happened...
* April 5th, Full, Simon Ford
* July 1st, Full, David Barham (realigned mirrors)
* July 15th, installed chiller

2014
* 16 Apr 2014, mirror alignment and optics checked after re-installation of tube. All fine. Toby and Diana.
* 19 May 2014, mirrors cleaned, earthing wire on lid tightened. Diana (and Mat's screwdriver)
* 21 May 2014, cleaned lens with Mat Cook. Diana
* 02 Jun 2014, removed and cleaned laser bed
* 14 Sep 2014, cleaned lens and mirrors, realigned. Diana and Brian Starkey

* 30 Jun 2014 Fitted microswitches in series with the magnetic "lid closed" detector. Magnetic detector still in operation, but with additional cutouts in series. (ie Magnetic open OR left side open OR right side open).
Risk assessment: increase in lid safety because it's in series with existing system. Tested that each detector individually will cut out the laser. Low electrical risk (low voltage and not near fingers). Mechanical components designed to not be sharp / protruding overly.
This additional system can be bypassed by determined operators and the reliability of the exiting cutout system is unknown although presumed to be reliable. We feel that the microswitches are an additional safety layer and no existing safety system is compromised. We do not believe there is any additional "perceived safety" causing more risky user behaviour.
The microswitches are operated by plastic affixed to the lid. The position/depth of these may need to be adjusted with time.

== Maintenance Shopping List ==

* 3-in-one light oil
* Cotton Buds
* Lens cleaner sachets
* Soft paint/cleaning brush
* Thermometer for water tank
* Hand held CO2 extinguisher

= Further Information =

* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser Product Page]
* [http://hpclaser.co.uk/index.php?main_page=page&id=5&chapter=2 HPCLaser Technical Info]
* [http://www.laserscript.co.uk/phpBB3/ Laserscript Forum]

LaserCut 5.3
* [http://www.leetro.com/english/sale/35.html Homepage]
* [http://www.leetro.com/english/down/LaserCut5.3%20Manual%20V1.6.pdf Manual]

== Installation ==

<gallery>
File:Laser_-_van.JPG
File:Makespace-laser-install-02.JPG
File:Laser_-_building_2.JPG
File:Laser_-_building.JPG
</gallery>

== Purchase ==

Full Purchase, Delivery and Installation (£6865.00+vat = £8238.00)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser engraving and cutting machine, 600mm by 900mm 60W] (£5250.00+vat)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=34 Laser Fume Filter] (£1250.00+vat)
* Delivery (£190+vat)
* Installation/Training (£175+vat)

== Repairs ==

We expect to have to change the following parts for general maintenance:
* The laser tube (guess every 6-12 months)
* The filter (guess every 3-6 months)
* The optics (guess every 6-12 months)

Maintenance and Spares:
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=3 60 watt C02 laser tube] (£275.00+vat)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=12 50 mm Focus Meniscus Lens] (£75.00+vat)
* Estimate for Call Out (£200.00)

Projects

2014-09-10T06:55:32Z

Stevancw: Small intro and re-ordered the page with header - hopefully make page more relevant to new members with communal projects at the top.

Below are a list of projects; some completed, some dead and some only twinkles in our eyes. Please add your project to the list (only good things come from sharing). If you have an idea for a project but are not sure how to get started then posting here or on the [https://groups.google.com/forum/#!forum/cammakespace Google group] is a great way to find helpful people.

== Communal projects ==

[[WorkbenchLinks|Workbenches]]- we need a horizontal surface to make things on, and people are keen to start making the makespace by building benches. See some suggestions for DIY workbench designs.

[[AutomatedStorageProposals|Automated storage/retrieval]]- a long-term crazy idea to build some sort of storage robot in the half-height storage area under the kitchen which will retrieve a member's storage box when they swipe their RFID tag. If you have a fleshed-out idea for how it ought to work, write up your proposal and link it from this page.

[[AncientMachines|Restoration / Fiddling with 'ancient' computers]] - a page to document the current status and work required on the old machines we have been gifted.

== Project Speed Dating ==

Quarterly we run 'Project Speed Dating' nights.
Here's a list of the projects at [[ProjectSpeedDating2]]

== Here we will add our projects ==

{| class="wikitable"
|-
! Project name
! Status
! People
! Tell me more about it
|-
| Roll and jump music generator
| Planned
| [[User:Dadabit|Dadabit]]
| This is a wearable with gyro and accelerometer. I will connect to ableton and/or maxmsp. So in initial phase. Also if there is anyone who did mapping, desperately in need to learn.
|-
| [[Mechanical computing]]
| Working but unreliable
| [[User:JimM|JimM]]
| Turing machines and other computers built without any electric components using ball bearings as memory. https://github.com/jmacarthur/millihertz
|-
| FleetFoot
| Planned
| [[User:Brice|Brice]]
| clojurescript + processing.js + webgl = Awesome!
|-
| Magicsphere
| Development
| [[User:Brice|Brice]]
| Secret Volumetric POV project
|-
| Lispator
| Concept
| [[User:Brice|Brice]]
| Complete Lisp machine implemented in FPGA.
|-
| MetaWatch automation
| Concept / Improvements
| [[User:Benjymous|Rich M]]
| Expanding the MetaWatch software for more "Internet of Things" integration - watch notifications when the doorbell rings, Turn lights on from your wrist, that sort of thing!
|-
| shapeshifting fabric
| design/development
| [[User:Dadabit|Dadabit]]
| well I got some sma wire, currently able to drive it, Now trying to make the machanical to actually end up in some coordinated movements. I need 3D modeling may be. Ping me if yo can help me with 3d modeling with the movement. I will thank you forever. (how long is forever can be negotiated)
|-
| Solr Logr
| Development/Refinement
| [[User:Elsmorian|Chris Elsmore]]
| Data logger, display and controller for my off-grid solar installation, and investigation into other alternative energy sources like building wind turbines.
|-
| Vehicle tracker / remote command receiver
| Progressing slowly
| [[User:JCGS|JCGS]]
| I have started to build a vehicle tracker based on the GM862 GPS/GSM/GPRS module.
|-
| ASR33 (Teletype) restoration
| Waiting
| [[User:JCGS|JCGS]]
| I have an old ASR33 that I plan to restore sometime. Some mechanical work is needed, including fabricating missing parts; also tracing and testing the circuitry, and interfacing it to a modern computer.
|-
| Vehicle motor controller
| Thinking about it
| [[User:JCGS|JCGS]]
| Once I've finished stretching my Land Rover to three axles, I'll start working on making the third axle electrically driven, with regenerative braking. I plan to make the controller myself, with big IGBTs and probably an mbed to control them.
|-
| Makespace OpenGL Visualisation
| Planned
| [[User:Wojciech|Wojciech]]
| A quick 3D mock up of procedurally generated Makespace.
|-
| Visventis (kites for wind energy)
| In process
| [[User:RobCopcutt|Robert Copcutt]]
| Poor people need electricity to learn to lift themselves out of poverty. A cheap way to generate electricity is therefore required. At visventis.org[http://visventis.org] we believe that kites are 1 way to do that. A device to support a flying kite has already been built. We now need to add reels for the tethers, a generator and electronics to control that generator. This could be the start of something big and all help is appreciated.
|-
| Motor/generator
| Advanced concept
| [[User:RobCopcutt|Robert Copcutt]]
| Small electric motors can be made over 98% efficient, and cheap, by following a few fundamental principles. Keep the air-gap speed high by using a large diameter. Eliminate the iron core and use just air. Use fine wire for the coils to keep eddy current losses down. Such machines would be ideal for many projects including Visventis and electric vehicles. Tools such as good laser cutters and CNC mills are important for making some of the parts. Let's talk.
|-
| Gauss meter
| Concept
| [[User:RobCopcutt|Robert Copcutt]]
| This should be a quick project to aid the motor/generator project above. Gauss meters are expensive but the sensors are not. Anyone interested to help build a simple meter to measure magnetic fields?
|-
| LED strip lights
| Concept
| [[User:RobCopcutt|Robert Copcutt]]
| LED lights have numerous advantages except for cost. I am interested to make replacements for fluorescent tubes, but buying LEDs in the quantity to build 1 is not economical. If I design one it makes sense to share the learning and build 20. As soon as we have sufficient interest the LEDs can be ordered and construction can begin.
|-
| Home power monitoring
| In process
| [[User:SimonS|Simon Stirley]]
| Monitoring of home mains power usage by current clamp. The clamp circuit is wired to an Arduino which monitors the current and totals up energy usage. Data is sent to a remote server via an ethernet shield every five minutes ([http://pvoutput.org/intraday.jsp?id=3214&sid=2484 live data])
The system also monitors PV generation and temperature. Future plans include adding logging to an SD card for finer analysis, integration with home-automation system.
|-
| Big-Mod-Trak
| In process
| [[User:SimonS|Simon Stirley]]
| After a 'new' BigTrak failed with not enough power, the circuits were ripped out and an Arduino with motor shield replaced. It currently has a very simple drive via either a Wii Nunchuk or an automatic mode using a distance sensor for very simple collision avoidance.
More plans include using a wireless Nunchuk, more sensors, and implementing some kind of programming mode. And a rocker launcher - of course.
|-
| Coat rack
| Complete
| [[User:ste5eu|Steve Upton]]
| When we opened the space we needed somewhere to hang our coats and I thought it would better to make than buy. More details on my blog here: [http://www.ste5eu.com/blog/2013/5/12/project-makespace-coat-rack.html coat rack]
|-
| OfficeHAL
| In process
| [[User:ste5eu|Steve Upton]]
| A Raspberri Pi based controller for my garden office (it is NOT a shed). My intention is to provide monitoring and control of the office environment via the web and physical controls on the device. As the rest of my office is styled on a steampunk theme OfficeHAL will be too. He currently has a wooden frame, brass porthole for an 'eye', and I'm working on a mechanical iris.
Features will include:
* Indoor temperature monitoring and control
* Outdoor weather monitoring: temp, humidity, wind speed
* Motion sensing camera
* COSM feed
|-
| Paint Robot
| Concept
| [[User:christie|Christie Nel]]
| A robot for painting roofs with glow in the dark paint.
|-
| usb Stenography
| Proof of concept
| [[User:tonypercy|Tony Percy]]
| A usb keypad comprised of 7 touch sensitive buttons, with piezoelectric haptic feedback, for use in development in a form of mnemonic stenography.
|-
| 1D Pong
| Prototyping
| [[User:DannyG|Danny Garden]]
| A 1D Pong Game. More details on my blog here: [http://www.muacksandglomps.com/blog/2013/08/07/1d-pong-game-for-makespace/ 1D Pong]
|}

User:Stevancw

2014-09-05T17:13:55Z

Stevancw: /* Recent Projects */

= Hello, world! =

[[File:stevancw.jpg|thumb|left|250x250px|alt=Stevan|Stevancw]]

I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease.
I'm interested in almost anything but particularly embedded electronics.

== Things I'm interested in ==

* Arduino and other embedded microcontrollers
* Raspberry Pi
* Linux

== Things I would love to collaborate on ==

* any health related projects
* anything that involves a computer

== Recent Projects ==

* DHT22 and Arduino ProMini based climate station with 0.96" OLED display
* Repurpose old 15.6" laptop screen with cheap Chinese controller board and laser cut acrylic case
* Laser lane for my Brompton bike
* Accelerometer sensor platform of monitoring symptoms in Parkinson's disease

<gallery mode="packed-hover" heights="180">
File:lcd_before.jpg|alt=Laptop monitor with controller|Laptop screen with DVI/VGA controller
File:Lasercut_monitor_case.jpg|alt=Old laptop screen repurposed|Laptop screen case
File:Starting climate sensor.jpg|alt=Climate Sensor with Arduino Nano|Beginning the climate sensor project
</gallery>

----

twitter [https://twitter.com/Stevancw]
web [http://stevancw.com]

----

File:Lcd before.jpg

2014-09-05T17:12:15Z

Stevancw: Laptop LCD working with controller.

Laptop LCD working with controller.

User:Stevancw

2014-09-05T16:59:17Z

Stevancw: adding gallery of projects

= Hello, world! =

[[File:stevancw.jpg|thumb|left|250x250px|alt=Stevan|Stevancw]]

I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease.
I'm interested in almost anything but particularly embedded electronics.

== Things I'm interested in ==

* Arduino and other embedded microcontrollers
* Raspberry Pi
* Linux

== Things I would love to collaborate on ==

* any health related projects
* anything that involves a computer

== Recent Projects ==

* DHT22 and Arduino ProMini based climate station with 0.96" OLED display
* Repurpose old 15.6" laptop screen with cheap Chinese controller board and laser cut acrylic case
* Laser lane for my Brompton bike
* Accelerometer sensor platform of monitoring symptoms in Parkinson's disease

<gallery mode="packed-hover" heights="180">
File:Lasercut_monitor_case.jpg|thumb|alt=Old laptop screen repurposed|Laptop screen case
File:Starting climate sensor.jpg|thumb|alt=Climate Sensor with Arduino Nano|Beginning the climate sensor project
</gallery>

----

twitter [https://twitter.com/Stevancw]
web [http://stevancw.com]

----

File:Starting climate sensor.jpg

2014-09-05T16:57:16Z

Stevancw: The beginnings of the climate sensor project

The beginnings of the climate sensor project

User:Stevancw

2014-09-05T16:46:42Z

Stevancw: /* Hello, world! */

File:Lasercut monitor case.jpg

2014-09-05T16:44:58Z

Stevancw: An old laptop died... lets use the screen as an external monitor; win.

An old laptop died... lets use the screen as an external monitor; win.

User:Stevancw

2014-09-05T16:33:09Z

Stevancw: /* Hello, world! */

User:Stevancw

2014-09-05T16:28:11Z

Stevancw:

= Hello, world! =

[[File:stevancw.jpg]]

I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease.
I'm interested in almost anything but particularly embedded electronics.

== Things I'm interested in ==

* Arduino and other embedded microcontrollers
* Raspberry Pi
* Linux

== Things I would love to collaborate on ==

* any health related projects
* anything that involves a computer

twitter [https://twitter.com/Stevancw]
web [http://stevancw.com]

----

User:Stevancw

2014-09-05T16:27:10Z

Stevancw:

[[File:Example.jpg]]
= Hello, world! =

I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease.
I'm interested in almost anything but particularly embedded electronics.

== Things I'm interested in ==

* Arduino and other embedded microcontrollers
* Raspberry Pi
* Linux

== Things I would love to collaborate on ==

* any health related projects
* anything that involves a computer

twitter [https://twitter.com/Stevancw]
web [http://stevancw.com]

----

Member's Skills

2014-09-05T16:25:33Z

Stevancw: Added Stevancw profile

People of makespace. Note that this list might not be comprehensive

<div class="memberslist">
{| style="border-spacing: 0px; width: 75%; height: 300px"
| {{MemberDetails|nickname=dadabit|wikiusername=dadabit|realname=gaye dadabit|imagefile=gayedadabit.jpg }}
| {{MemberDetails|nickname=srimech|wikiusername=JimM|realname=Jim MacArthur|imagefile=Jim3-scaled.jpeg }}
| {{MemberDetails|nickname=LaurieJ|wikiusername=Laura|realname=Laura James <br \>(Co-founder <br \>and director)|imagefile=LJ-square2.jpg}}
| {{MemberDetails|nickname=Brice|wikiusername=Brice|realname=Brice Fernandes|imagefile=Brice_stripes.jpg }}
| {{MemberDetails|nickname=rjw57|wikiusername=Rjw57|realname=Rich Wareham|imagefile=rjw57_profile.jpg }}
|-
| {{MemberDetails|nickname=benjymous|wikiusername=Benjymous|realname=Richard Munn|imagefile=benjymous.jpg }}
| {{MemberDetails|nickname=elsmorian|wikiusername=Elsmorian|realname=Chris Elsmore|imagefile=ElsmorianProfileSmall.jpg }}
| {{MemberDetails|nickname=Phil|wikiusername=Phil|realname=Phil Cowans|imagefile=Phil.jpg }}
| {{MemberDetails|nickname=Martin|wikiusername=Martin_de_S|realname=Martin de Selincourt|imagefile=Martin_de_S_pic.jpg }}
| {{MemberDetails|nickname=Kim|wikiusername=Kim SJ|realname=Kim Spence-Jones|imagefile=Kim_SJ_Photo_July_2012.jpg‎ }}
|-
| {{MemberDetails|nickname=Molarch|wikiusername=Molarch|realname=Jonathan Moller|imagefile=JMollerSM.jpg‎ }}
| {{MemberDetails|nickname=SimonS|wikiusername=SimonS|realname=Simon Stirley|imagefile=P1030133.JPG }}
| {{MemberDetails|nickname=JCGS|wikiusername=JCGS|realname=John Sturdy|imagefile=JCGS.jpg}}
| {{MemberDetails|nickname=heng|wikiusername=heng|realname=Henry Gomersall|imagefile=heng_photo.jpg}}
| {{MemberDetails|nickname=Ste5eu|wikiusername=Ste5eu|realname=Steve Upton|imagefile=ste5eu_ms_unionjack.jpg‎}}
|-
| {{MemberDetails|nickname=nickcadsoftuk|wikiusername=nickcadsoftuk|realname=Nicholas Johnson|imagefile=nickcadsoftuk_me_128px.jpg}}
| {{MemberDetails|nickname=Uwe|wikiusername=Uboro|realname=Uwe Borowski|imagefile=ub.jpg}}
| {{MemberDetails|nickname=Cvoth|wikiusername=Cvoth|realname=Chris Voth|imagefile=550719_10150969145629501_85666288_n.jpg}}
| {{MemberDetails|nickname=Tom|wikiusername=Tomoinn|realname=Tom Oinn|imagefile=391654_10151074902824205_2051894982_n.jpg}}
| {{MemberDetails|nickname=markocosic|wikiusername=markocosic|realname=Marko Cosic|imagefile=Markocosic_mugshot.jpg‎}}
|-
| {{MemberDetails|nickname=Hannah|wikiusername=HannahWray|realname=Hannah Wray|imagefile=HW_ID_photo.jpg}}
| {{MemberDetails|nickname=Anne|wikiusername=annekh510|realname=Anne Harrison|imagefile=annekh510_mugshot.jpg}}
| {{MemberDetails|nickname=Robert|wikiusername=RobCopcutt|realname=Robert Copcutt|imagefile=RobCopcutt_Mugshot.jpg}}
| {{MemberDetails|nickname=Robert|wikiusername=RobHoff|realname=Robert Hoff|imagefile=robert_hoff.jpg}}
| {{MemberDetails|nickname=Mat|wikiusername=Mat-C|realname=Mat Cook|imagefile=yourusername_mugshot.jpg}}
|-
| {{MemberDetails|nickname=Jon|wikiusername=JonGreen|realname=Jon Green|imagefile=jongreen-200x300.jpg}}
| {{MemberDetails|nickname=dumbledad|wikiusername=Dumbledad|realname=Tim Regan|imagefile=TimRegan(dumbledad).jpg}}
| {{MemberDetails|nickname=Chris|wikiusername=Chris Abri|realname=Chris Abri|imagefile=C-Abri-Avatar.jpg}}
| {{MemberDetails|nickname=Christie|wikiusername=Cyberius|realname=Christie|imagefile=ChristieNel.jpg}}
| {{MemberDetails|nickname=Stevan|wikiusername=Stevancw|realname=Stevan Wing|imagefile=stevancw.jpg}}
|-
| {{MemberDetails|nickname=yournickname|wikiusername=yourusername|realname=Your Real Name|imagefile=yourusername_mugshot.jpg}}
|}
</div>

= Skills =

If you have knowledge to share with others, or are looking for expertise, check out the [[SkillsKnowhow|skills exchange]].

File:Stevancw.jpg

2014-09-05T16:21:50Z

Stevancw: A picture of Stevan

A picture of Stevan

User:Stevancw

2014-09-05T16:19:50Z

Stevancw:

[[File:Example.jpg]]
= Hello, world! =

I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease.
I interested in hobby electronics and work on a couple of electronics based projects at work.

== Things I'm interested in ==

* Arduino and other embedded microcontrollers
* Raspberry Pi
* Linux

== Things I would love to collaborate on ==

* any health related projects
* anything that involves a computer

twitter [https://twitter.com/Stevancw]
web [http://stevancw.com]

User:Stevancw

2014-09-05T16:16:03Z

Stevancw: Created page with " = Hello, world! = I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease. I interested in hobby electronics and work on a couple of electronics based pro..."

= Hello, world! =

I'm Stevan I'm a neurology doctor and researcher into Parkinson's Disease.
I interested in hobby electronics and work on a couple of electronics based projects at work.

== Things I'm interested in ==

- Arduino and other embedded microcontrollers
- Raspberry Pi
- Linux

== Things I would love to collaborate on ==

- any health related projects
- anything that involves a computer

twitter [[@stevancw]]
web [[stevancw.com]]