View source for Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven

From Makespace

← Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven

Jump to: navigation, search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page:

Okay ish setting s for 125micron mylar:

400mm/s

42%

rotate stencil 45&deg; - cutting at 0&deg; or 90&deg; blows out the webs between pads.

Try reducing the cut, still some webs blew through.



ToDo seperate page for stencils/SMD HowTo

--[[User:Pinski1|Pinski1]] ([[User talk:Pinski1|talk]]) 22:40, 4 August 2015 (BST)

Return to Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven.

Retrieved from "http://wiki.makespace.org/Talk:Equipment/Electronics_Workbenches/T-962A_Reflow_Oven"

Navigation menu