View source for Equipment/CNC Router/Training

[[Equipment|Equipment]] / [[Equipment/CNC_Router|CNC Router]] / Training

= CNC Router Training =

This page documents the process for being trained on the CNC Router, and the list of members who have completed that training.

== Summary ==

Training takes place in three main steps:
* Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
* Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
* Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the CNC Router is run by the CNC Router Owners. The CNC Router Owners are a group of people responsible for maintaining and training on the CNC Router, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the CNC Router.  

== Getting onto a training session ==

Sessions are advertised on '''http://meetup.makespace.org'''
* For discussing training, or requesting additional slots, use the mailing list thread: [https://groups.google.com/d/topic/cammakespace/0aNnAEGF-5U/discussion Training : CNC Router ]
 

Please be patient - training is provided by volunteers who give up their free time to run sessions.


Notes:
* You can only be trained if you have your name allocated to a slot

= Owners/Trainers =

The following members of Makespace are owners and/or trainers of the CNC Router, so are trained to use and teach use of the Router:

*Mark Mellors - Owner
*Robin Sterling - Owner
*Martin Lenz - Owner

Further Contacts:
*Chris Abri - (Past Member)

= Post Training Email =

Congratulations on completing your induction for the CNC Router.

Here are some useful links and further information to help you get going.

General router details can be found here: http://wiki.makespace.org/Equipment/CNC_Router

Before using the machine please make sure you have read the health and safety notes: http://wiki.makespace.org/Equipment/CNC_Router#Health_and_Safety


A few reminders: 

You must not use the machine if you are the only member in the space.

Router cutters that have bearings on the end - like the one below, can not and must not be used!
<br>
[[File:25845_P.jpg]]

Please supply 50p into the red honesty box if you are using Makespace cutters - this helps us to maintain a supply of good cutters for you to use and goes towards the upkeep of the machine.

Please get in touch with the owners if you have a question or problem: http://wiki.makespace.org/Equipment/CNC_Router#Owners

We recommend that you check the Makespace google group to see what's going on: https://groups.google.com/forum/?fromgroups=#!forum/cammakespace

Please report any issues to the group here: https://groups.google.com/forum/?fromgroups=#!topic/cammakespace/rkchD7VqM2c%5B1-25%5D 

Please leave the router in a clean state when you have finished - Be awesome - leave it better than you found it :)

Be safe and enjoy.

= Trained Users =

The following members of Makespace are trained and qualified to use the CNC Router (note, they are not qualified to train others however):
* Paul Osborn (Stephen Woolhead 1/7/13)
* Adrian Carr (Stephen Woolhead 1/7/13)
* Tobias Roberts (Stephen Woolhead 1/7/13)
* Damien Guihen (Mark Mellors 3/7/13)
* Steve Kelly (Mark Mellors 3/7/13)
* Milosch Meriac (Chris Abri 3/7/13)
* Jake Young (Chris Abri 3/7/13)
* Martin de Selincourt (Chris Abri 3/7/13)
* J. Antonio Barragan (Chris Abri 8/7/13)
* Toby Moncaster (Chris Abri 8/7/13)
* Shareef Jalloq (Chris Abri 8/7/13)
* Josh Keeler (Mark Mellors 9/7/13)
* Marko Cosic (Mark Mellors 9/7/13)
* Diana Probst (Mark Mellors 9/7/13)
* Ben Evans (Stephen Woolhead 9/7/13)
* Rachel Rayns (Stephen Woolhead 9/7/13)
* Mat Cook (Stephen Woolhead 9/7/13)
* Roeland Schumacher (Chris Abri 11/7/13)
* James Waldmeyer (Chris Abri 11/7/13)
* Peter Mottram (Chris Abri 11/7/13)
* Ajith Shadakshari (Mark Mellors 18/7/13)
* Mark Tillotson (Mark Mellors 18/7/13)
* Ben Alper (Mark Mellors 18/7/13)
* Indy Wilkhu (Chris Abri 25/7/13)
* Matthew Ireland (Chris Abri 25/7/13)
* Pop Sharma (Chris Abri 25/7/13)
* Nick Johnson (David Bebb 30/05/13)
* Brian Corteil (David Bebb 30/07/13)
* Dan Tidhar (David Bebb 30/07/13)
* Ward Hills (David Bebb 30/07/13)
* Kevin Maloney (Mark Mellors 18/7/13)
* Andrew Lipson (Mark Mellors 18/7/13)
* Chris Wilson (Mark Mellors 1/8/13)
* Richard Mitchell (Mark Mellors 1/8/13)
* Adrian van den Heever (Mark Mellors 1/8/13)
* Benyahmin Kidder (Chris Abri 8/8/13)
* Andrew Dunn (Chris Abri 8/8/13)
* Robert Hoff (Chris Abri 8/8/13)
* Edward Imhagwe (Mark Mellors 15/8/13)
* Lewis Williams (Mark Mellors 15/8/13)
* Vincent Sanders (Mark Mellors 15/8/13)
* Andy Fisher (Mark Mellors 22/08/13)
* Daniel Garden (Mark Mellors 22/08/13)
* ST John (Mark Mellors 29/08/13)
* Matt Harvey (Mark Mellors 29/08/13)
* Michael Thomas (Mark Mellors 29/08/13)
* Alexis Mather (Mark Mellors 5/09/13)
* Chris Stanley (Mark Mellors 5/09/13)
* Jon Wood (Mark Mellors 5/09/13)
* Harry Braviner (Mark Mellors 12/09/13)
* Jason White (Mark Mellors 12/09/13)
* Jon Callan (Mark Mellors 12/09/13)
* Marco Aita (Chris Abri 19/09/13)
* Ed Herbert (Chris Abri 19/09/13)
* John Simm (Chris Abri 19/09/13)
* Chris Voth (Chris Abri 17/10/13)
* Pete Woodhouse (Chris Abri 17/10/13)
* Fergus Riche (Chris Abri 17/10/13)
* Mark Roberts (Chris Abri 17/10/13)
* Katia Dilks (Chris Abri 14/11/13)
* Tim Dilks (Chris Abri 14/11/13)
* Theo Sanderson (Chris Abri 14/11/13)
* Esther Leighton (Chris Abri 09/01/14)
* Aleksandar Tomic (Chris Abri 09/01/14)
* Benjamin Butler (Chris Abri 13/02/14)
* Jon Aas (Chris Abri 04/03/14)
* Mark Cheverton (Ben Butler 25/03/14)
* Andrew Gale (Ben Butler 01/04/14)
* Robert Karpinski (Ben Butler 01/04/14)
* Shelagh Shepherd (Ben Butler 01/04/14)
* Paul Edgington (Jason White 02/04/14)
* Paco Cordobes (Jason White 02/04/14)
* Rob Voisey (Jason White 09/04/14)
* Riccardo Gherardi (Jason White 09/04/14)
* Rick Hamilton (Jason White 14/04/14)
* Thomas Keller (Jason White 14/04/14)
* Martin Lenz (Ben Butler 15/05/14)
* Alberto Santos (Mark Mellors 22/05/14)
* James Hutton (Mark Mellors 22/05/14)
* Innes Edridge (Mark Mellors 22/05/14)
* Paul Holland (Chris Abri 17/06/14)
* Maciek Piatek (Chris Abri 17/06/14)
* Matthew Taylor (Chris Abri 17/06/14)
* Shashank (Jason White 23/06/14)
* Tim Rowsell (Jason White 23/06/14)
* Owen Woods (Jason White 23/06/14)
* Alexandra Grigore (Chris Abri 15/07/14)
* Richard Armstrong (Chris Abri 15/07/14)
* David Taylor (Chris Abri 15/07/14)
* Al Napp (Jason White 19/08/14)
* Jon Baxter (Jason White 19/08/14)
* Graeham Douglas (Chris Abri 16/9/14)
* Stevan Wing (Chris Abri 16/9/14)
* Rick Lupton (Jason White 29/10/14)
* Milosz (Jason White 29/10/14)
* Erik Pickering (Jason White 09/01/15)
* Luke Twydell (Jason White 09/01/15)
* Jae Turner (Jason White 09/01/15)
* John Sidiropoulos (Jason White 30/01/15)
* Andrei Ruskuc (Jason White 30/01/15)
* Tom Parker (Jason White 30/01/15)
* Phil McArthur (Jason White 30/01/15)
* John Mead (Jason White 13/02/15)
* Adam Mulligan (Jason White 13/02/15)
* Zachary Beer (Jason White 13/02/15)
* Ed Robertson (Jason White 13/02/15)
* Robin Sterling (Jason White 27/03/15)
* Kristien De Clercq (Jason White 27/03/15)
* Simon Birrell (Jason White 27/03/15)
* B Goodall (Jason White 27/03/15)
* Marcin Izo (Jason White 12/06/15)
* William Morton (Jason White 12/06/15)
* Abi (Jason White 12/06/15)
* Jack Brewster (Jason White 12/06/15)
* Scion (Jason White 12/06/15)
* Henry (Jason White 17/06/15)
* Ian Mc(Jason White 17/06/15)
* Kham Ali(Jason White 17/06/15)
* Julius Schmidt(Jason White 17/06/15)
* Brian Starkey (Jason White 21/08/15)
* Andrew Cooke (Jason White 21/08/15)
* Phill Banks (Jason White 21/08/15)
* David Horsnell (Jason White 21/08/15)
* Robert Meadows (Robin Sterling 19/11/15)
* Robyn Kerrison (Robin Sterling 19/11/15)
* Greg Matthews  (Robin Sterling 19/11/15)
* Stephen Harrison (Jason White 09/01/16)
* William Deeks (Jason White 21/08/15 09/01/16)
* David Haines (Jason White 21/08/15 09/01/16)
* Hugo Keene (HJ Lemstra 11/01/16)
* Giovanni Bisotti  (HJ Lemstra 11/01/16)
* Alex Gee (HJ Lemstra 11/01/16)
* Mark Radford (HJ Lemstra 11/01/16)
* Jonathan Waite (Robin Sterling 07/06/16)
* Cong Cong Bo (Robin Sterling 07/06/16)
* Matt Wayland (Robin Sterling 07/06/16)
* Nick Garner (Robin Sterling 07/06/16)
* Jenny Molloy (Robin Sterling 14/06/16)
* Craig Richardson (Robin Sterling 14/06/16)
* Thomas Grant (Robin Sterling 14/06/16)
* Mik Lamming (Robin Sterling 12/07/16)
* Adrien ? (Robin Sterling 12/07/16)
* Jonathon Woolf (Robin Sterling 12/07/16)
* Michael Schmid (Robin Sterling 19/07/16)
* Bogdan ? (Robin Sterling 19/07/16)
* Ben Wheatley (Robin Sterling 19/07/16)
* Cat Fitzpatrick (Robin Sterling 23/08/16)
* Nadia Bassiri (Robin Sterling 23/08/16)
* Hsin-Ling Liang (Robin Sterling 23/08/16)
* Will Nock (Robin Sterling 20/09/16)
* John Sturdy (Robin Sterling 20/09/16)
* David Marcus (Robin Sterling 20/09/16)
* Jamie Powell (Robin Sterling/Martin Lenz 27/09/16)
* Danny Farrant (Robin Sterling/Martin Lenz 27/09/16)
* Rick Amos (Robin Sterling/Martin Lenz 27/09/16)
* Miguel Morin (Martin Lenz 21/10/16)
* Katy Marshall (Martin Lenz 21/10/16)
* Tobias Wenzel (Martin Lenz 21/10/16)
* Alex Bate (Martin Lenz 18/11/16)
* Carlos Martos (Martin Lenz 18/11/16)
* Jeremy Bentham (Martin Lenz 18/11/16)
* Richard Fosh (Martin Lenz 24/11/16)
* Chris Porter (Martin Lenz 24/11/16)
* Simon Guest (Martin Lenz 24/11/16)
* Steve Upton (Robin Sterling 29/11/16)
* Mateusz Kosturek (Robin Sterling 29/11/16)
* Ross Rounsevell (Robin Sterling 29/11/16)
* Chris Padbury (Robin Sterling 6/12/16)
* Rob MacAulay (Robin Sterling 6/12/16)
* Charlie Stokes (Robin Sterling 6/12/16)
* Jonathan Austin (Martin Lenz 14/14/16)
* Jo Brook (Martin Lenz 14/14/16)
* Tessa Paris (Martin Lenz 14/14/16)
* Piers Hampson (Robin Sterling 18/12/16)
*Scott Cunliffe (Martin Lenz 16/02/17)
* Andrea Cipri (Martin Lenz 16/02/17)
* Barry Plows (Martin Lenz 16/02/17)

= Training Cheat sheet =

The training structure and prompt sheet. Please note, this is used by the CNC Router Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitute for the training itself.

== Group Training ==

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.


'''Introduction/walk around'''
* Extraction
* Water Cooler system
* Machine Bed
* Router – Collets - Cutters (Mention 50p for maintenance costs if using Makespace Cutters)
* Gantry/Moving Parts
* PC & Software Locations
* Material Storage
* Hand controller -[[Equipment/CNC_Router/Hand_Controller|Hand Controller Guide]]


'''Health & Safety'''

Risks
* Dust
* Noise
* Fire
* Trapping
* Burns
* Loss of Limb or Digit


PPE

* Ear Defenders
* Safety Goggles
* Common Sense Hat!


'''Machine Startup & Positioning'''
* Check handset is attached properly
* Power up main switch
* Check Water Pump
* Check extractor is functional and not full
* Check handset says “Datum?” (if not, reset E.Stop)
* Click “OK” ensuring no obstructions. (Machine will go to X0 Y0 Z+Max)
* Check spindle is safe and functioning correctly.


'''Job Setup – Demo piece'''
* Workholding, Clamping and work positioning
* Tool Selection & Collet sizes
* Zero work
* Load G-Code directly onto USB stick from PC(no sub-directories)
* Place USB stick into Hand Controller
* Select and run job at desired feedrates


Do Not Leave The Machine Unattended While Running A Job! However Long It Takes.

== Individual Training Task ==

The individual task to get familiar, prompt questions and check understanding:

Task
* Make a.....

Steps
* Set individual to work, don't prompt but do answer questions (or pose if needed)
* Talk through design once done, question/check things etc
* Proceed to routing (watch carefully all steps)
* Ask to stop job/restart, question escalation process

Assuming all ok:
* Get them to read the health and safety notes about operation and materials
* Add to the trained member list!

== Project Oversight ==

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)