Equipment/Drill Presses - Revision history

RobCopcutt at 02:06, 3 August 2013

2013-08-03T02:06:59Z

ST: fixed heading depths

2013-05-08T15:11:44Z

fixed heading depths

MarkMellors at 21:21, 3 April 2013

2013-04-03T21:21:59Z

MarkMellors at 21:15, 3 April 2013

2013-04-03T21:15:13Z

MarkMellors at 21:14, 3 April 2013

2013-04-03T21:14:49Z

MarkMellors at 21:14, 3 April 2013

2013-04-03T21:14:26Z

MarkMellors: created content

2013-04-03T21:08:58Z

created content

Phil: Created page with "... someone should write this."

2013-03-31T11:08:51Z

Created page with "... someone should write this."

New page

... someone should write this.

@@ Line 1: / Line 1: @@
 [[Equipment|Equipment]] / Drill Press
@@ Line 5: / Line 7: @@
 = Summary =
-A pillar drill/drill press is an electrical motor that rotates a replaceable drill bit to make a hole in wood, plastic, or metal. The parts of a pillar drill include the handle, an on/off switch with a reversing for changing the rotation direction of the drill bit, a drive belt and gearbox for speed adjustment, and the chuck that holds the drill bit in place.
+A pillar drill/drill press has an electrical motor that rotates a replaceable drill bit to make a hole in wood, plastic, or metal. The parts of a pillar drill include the handle, an on/off switch with a reversing for changing the rotation direction of the drill bit, a drive belt and gearbox for speed adjustment, and the chuck that holds the drill bit in place.
@@ Line 30: / Line 32: @@
 '''Sight/Noise/Dust/Vibration'''
-* P.P.E. to be worn when using the equipment.
+* Wear eye protection to prevent flying chips or broken drills doing any damage to them.
@@ Line 46: / Line 48: @@
 Make sure you use the correct drill bit and speed for the type of material you are drilling into. For example use a wood bit for timber and a high-speed steel bit for metal. Use the pulleys to adjust the speed as appropriate for the material and drill diameter. A useful guide is available [http://www.idealtools.com.au/wordpress/wp-content/uploads/2012/07/drill-speed-chart-1.jpg| here].(A guide should be printed and posted in the workshop)

@@ Line 6: / Line 6: @@
 = Summary =
 A pillar drill/drill press is an electrical motor that rotates a replaceable drill bit to make a hole in wood, plastic, or metal. The parts of a pillar drill include the handle, an on/off switch with a reversing for changing the rotation direction of the drill bit, a drive belt and gearbox for speed adjustment, and the chuck that holds the drill bit in place.
-−
 == Owners ==
@@ Line 55: / Line 58: @@
-== Maintenance ==
+= Maintenance =
 Every month inspect for damage and general wear and tear (including drive belt).
-== Further Information ==
+= Further Information =
 [https://www.youtube.com/watch?v=_UjUPb7O6XA| Drill Safety & operation (Video)]

@@ Line 9: / Line 9: @@
 == Owners ==
 == Health and Safety ==
@@ Line 35: / Line 36: @@
 == Instructions ==
-If you've never used a pillar drill before, please watch this video first [https://www.youtube.com/watch?v=p0yyOyb3XXE| Drill Safety & operation (Video)]
+If you've never used a pillar drill before, please watch this video first [https://www.youtube.com/watch?v=_UjUPb7O6XA| Drill Safety & operation (Video)]
 Never wear loose clothing or dangling jewellery which could catch in the drill as you lean over it. And always wear eye goggles to protect yourself from flying dust and swarf.
@@ Line 41: / Line 42: @@
 The drill bit will become hot with use so keep you hands off it.
-Make sure you use the correct drill bit for the type of material you are drilling into. For example use a wood bit for timber and a high-speed steel bit for metal.
+Make sure you use the correct drill bit and speed for the type of material you are drilling into. For example use a wood bit for timber and a high-speed steel bit for metal. Use the pulleys to adjust the speed as appropriate for the material and drill diameter. A useful guide is available [http://www.idealtools.com.au/wordpress/wp-content/uploads/2012/07/drill-speed-chart-1.jpg| here].(A guide should be printed and posted in the workshop)
@@ Line 58: / Line 59: @@
 == Further Information ==
-[https://www.youtube.com/watch?v=p0yyOyb3XXE| Drill Safety & operation (Video)]
+[https://www.youtube.com/watch?v=_UjUPb7O6XA| Drill Safety & operation (Video)]
-−
-[[File:BHP452_OM.pdf| Drill manual]]

@@ Line 2: / Line 2: @@
 [[File:SmallPillarDrill.jpg|thumb|460px|right|Small Pillar Drill]]
-[[File:LargePillarDrill2.jpg|thumb|460px|right|Floor standing pillar drill]]
+[[File:LargePillarDrill2.JPG|thumb|460px|right|Floor standing pillar drill]]
 = Summary =

@@ Line 2: / Line 2: @@
 [[File:SmallPillarDrill.jpg|thumb|460px|right|Small Pillar Drill]]
-[[File:largePillarDrill2.jpg|thumb|460px|right|Floor standing pillar drill]]
+[[File:LargePillarDrill2.jpg|thumb|460px|right|Floor standing pillar drill]]
 = Summary =

← Older revision		Revision as of 21:08, 3 April 2013
Line 1:		Line 1:
−	... ~~someone should write~~ this.	+	[[Equipment\|Equipment]] / Drill Press
		+
		+	[[File:SmallPillarDrill.jpg\|thumb\|460px\|right\|Small Pillar Drill]]
		+	[[File:LargePillarDrill.jpg\|thumb\|460px\|right\|Floor standing pillar drill]]
		+
		+	= Summary =
		+	A pillar drill/drill press is an electrical motor that rotates a replaceable drill bit to make a hole in wood, plastic, or metal. The parts of a pillar drill include the handle, an on/off switch with a reversing for changing the rotation direction of the drill bit, a drive belt and gearbox for speed adjustment, and the chuck that holds the drill bit in place.
		+
		+	== Owners ==
		+
		+
		+	== Health and Safety ==
		+	'''Sharp Object/material'''
		+	* All drills to be kept in their holders until they are required.
		+	* Wait for the drill bit to stop moving before using the chuck.
		+
		+	'''Slips, Trips and Falls'''
		+	* Waste material/offcuts to be kept clear of work area.
		+
		+	'''Fire'''
		+	* Equipment will be checked for defects before each use to minimise the risk of possible electrical faults or fire.
		+	* Carbon Dioxide extinguisher to be available for any electrical fires
		+
		+	'''Electric shock'''
		+	* The equipment will be checked monthly to ensure that there are no defects in the wiring, switch and motor.
		+
		+	'''Sight/Noise/Dust/Vibration'''
		+	* P.P.E. to be worn when using the equipment.
		+
		+
		+	== Training ==
		+
		+
		+
		+	== Instructions ==
		+
		+	If you've never used a pillar drill before, please watch this video first [https://www.youtube.com/watch?v=p0yyOyb3XXE\| Drill Safety & operation (Video)]
		+
		+	Never wear loose clothing or dangling jewellery which could catch in the drill as you lean over it. And always wear eye goggles to protect yourself from flying dust and swarf.
		+
		+	The drill bit will become hot with use so keep you hands off it.
		+
		+	Make sure you use the correct drill bit for the type of material you are drilling into. For example use a wood bit for timber and a high-speed steel bit for metal.
		+
		+
		+	== Tips & Tricks ==
		+
		+	* Keep work area clean and well lit. Cluttered and dark areas invite accidents.
		+	* Keep bystanders away while operating the drill. Distractions can cause you to lose control.
		+	* Remove the chuck key before turning the drill on. A key left attached may result in personal injury.
		+	* Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
		+	* Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Do not wear gloves.
		+
		+
		+
		+	== Maintenance ==
		+	Every month inspect for damage and general wear and tear (including drive belt).
		+
		+	== Further Information ==
		+	[https://www.youtube.com/watch?v=p0yyOyb3XXE\| Drill Safety & operation (Video)]
		+
		+	[[File:BHP452_OM.pdf\| Drill manual]]