Difference between revisions of "Equipment/Lathe/Training"
From Makespace
RobCopcutt (Talk | contribs) (Created page with "= Lathe Training = Lathe training is done in group sessions. The tour of the machine is followed by an explanation of the hazards. Each member then participates in a short const...") |
RobCopcutt (Talk | contribs) |
||
| Line 16: | Line 16: | ||
= Trained user list = | = Trained user list = | ||
* Owner - Roger Smith | * Owner - Roger Smith | ||
| − | * | + | * [[user:RobCopcutt|Robert Copcutt]] |
*Mark Tillotson - (Robert Copcutt 2013) | *Mark Tillotson - (Robert Copcutt 2013) | ||
| + | *Chris Abri | ||
| + | *Tom Ingham | ||
| + | *Martin De Selincourt | ||
| + | *Peter Sewell | ||
*Ben Evans | *Ben Evans | ||
*Adrian Carr | *Adrian Carr | ||
| Line 25: | Line 29: | ||
*Tom Oinn | *Tom Oinn | ||
*Maciek Piztek | *Maciek Piztek | ||
| − | * | + | *Pop Sharma |
*John Clamp | *John Clamp | ||
*Shareef Jalloq | *Shareef Jalloq | ||
Revision as of 17:25, 4 August 2013
Lathe Training
Lathe training is done in group sessions. The tour of the machine is followed by an explanation of the hazards. Each member then participates in a short construction project to learn what it feels, sounds and looks like to do it properly. It should take 2 to 2.5 hours.
The main danger is getting caught in the work because the motor will not stop if this happens. Users must not wear loose clothing, or allow hair to get near the workpiece.
Gloves are NOT recommended.
Chips from the work are a hazard to eyes so eye protection is essential.
Before starting the motor make sure the chuck is moving freely and that the key is out.
The swarf, particularly steel swarf has sharp edges so a brush should be used to clean everything.
Trained user list
- Owner - Roger Smith
- Robert Copcutt
- Mark Tillotson - (Robert Copcutt 2013)
- Chris Abri
- Tom Ingham
- Martin De Selincourt
- Peter Sewell
- Ben Evans
- Adrian Carr
- Antonio Barragan
- Tom Oinn
- Maciek Piztek
- Pop Sharma
- John Clamp
- Shareef Jalloq
- Errol McMullen
- Patrick Greaney
- Renee Chow
- Joe Tapply
- David Webb
- John Sturdy
- Peter Provis
- Rachel Rayns
- Marco Cosic
- Kevin Latter
- Michael Thomas
- Richard Mitchell
- Lewis Williams
- Dan Tidhar
