Difference between revisions of "Equipment/Laser Cutter"
Line 30: | Line 30: | ||
To get training and be added to the qualified user list, you will need to arrange for one of the Laser Cutter Maintainers to train you up. For the details on how to arrange training, see: | To get training and be added to the qualified user list, you will need to arrange for one of the Laser Cutter Maintainers to train you up. For the details on how to arrange training, see: | ||
− | * The [[Equipment/Laser_Cutter/Users Laser Cutter Users]] page | + | * The [[Equipment/Laser_Cutter/Users|Laser Cutter Users]] page |
== Health and Safety == | == Health and Safety == |
Revision as of 17:07, 20 January 2013
Summary
This is our LS 6090 PRO Laser Cutter. It has a working area of 900mm by 600mm, and is powered by a 60w CO2 Water Cooled Laser Tube that can engrave and cut through materials such as wood, plastic, card, leather, fabrics, up to about 10-15mm thick (note, it can not cut metal). The laser cut is approximately 0.15mm wide, and a job can take a few seconds through to tens of minutes depending on material thickness and design complexity.
We have a dedicated PC running LaserCut 5.3 software to import, prepare and download jobs to the Laser Cutter. It can import various formats, with DXF being the most commonly used, so various software packages can be used to create your designs.
Here are some examples of laser jobs we've run (please add a photo of yours any time you do a job!)
Using the Laser Cutter
The laser cutter is a great way to easily produce accurate and complex 2D forms in various materials, and can be designed for with limited experience in various drawing or CAD applications. At the same time, it is an expensive tool with real risk of injury and fire, so is very important you know how to use it to avoid damaging yourself and the machine. You must only use the laser cutter if you have been trained, and if you are ever in any doubt about something, please ask for assistance.
Training
YOU CAN ONLY USE THE LASER CUTTER IF YOU HAVE BEEN TRAINED AND ARE ON THE TRAINED USER LIST!
To get training and be added to the qualified user list, you will need to arrange for one of the Laser Cutter Maintainers to train you up. For the details on how to arrange training, see:
- The Laser Cutter Users page
Health and Safety
The laser cutter is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the laser cutter are:
- ONLY USE THE LASER CUTTER IF YOU ARE ON THE LIST OF TRAINED USERS
- NEVER LEAVE THE LASER CUTTER RUNNING UNATTENDED
- KNOW WHAT TO DO IF A FIRE BREAKS OUT
- NEVER CUT MATERIALS THAT YOU DON'T KNOW ARE SAFE
As a trained user, you should be very aware of the following risks and how to deal with them:
FIRE (under normal operation) - Cutting at the wrong speed or the wrong power can result in the material igniting
- You must watch the cutter at all times and be prepared to abort the job if problems occur
- Small flashes of flame that don't hand around for a fraction of a second are acceptable, but any more is rare and not
- If a fire does take, this is the process you should follow (from minor to major):
- Press "pause" (the same button you started the job with) - This will turn the laser off so no more heat enters, and assuming the flame goes out, you can press "start" for the job to continue where it left of
- Open the lid - With the job paused, you can open the lid to blow out the flame. Again, it is possible to re-close the lid and continue where you left off
- Move the material from under the laser head assuming safe to do so (so it doesn't damage the optics; alternatively send the laser to home/datum), and smother with a spare sheet of material or blow out
- Use the workshop CO2 extinguisher to extinguish the flame
- You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at
FIRE (abnormal operation) - If the head gets stuck or something else goes wrong, ignition could happen much more suddenly or intensely
- You must watch the cutter at all times and be prepared to abort the job if problems occur
- If the head gets trapped (e.g. tomb-stoning of a piece, mechanical failure) or any other problem occurs that causes or could cause fire, this is the process you should follow:
- Hit the emergency stop
- Open the lid and move the material from under the laser head assuming safe to do so (so it doesn't damage the optics)
- Blow out, smother with a spare sheet of material, or use the CO2 extinguisher to extinguish the flame as appropriate
- Ensure a Maintainer looks at the machine before it is brought back in to action if it is not obvious what went wrong and all is ok
- You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at
FUMES - The laser cutting process will release different smoke and fumes depending on the material.
- Never cut PVC or a material you are not sure is safe. When PVC is heated it releases chlorine gas, this mixes with the moisture in the air and the result is hydrochloric acid which is toxic to humans and corrosive to machines.
- Ensure the filter is on and the cutter lid stays closed for a while after a job to allow the fumes to clear.
- If you are feeling strange, think the fume build up is too much, or for any other reason you are unsure, stop the job.
TRAPPING - The head and bed of the cutter can be moved by the front panel menu or programs in the machines memory.
- Be careful when working inside the cutting area or with the lid open not to trap hands, hair, clothing or anything else.
- Always check the machine for unexpected items that may have fallen in before closing the lid.
- Do not attempt to climb into the machine!
LASER BURNS/LIGHT - A 60W laser can do real damage.
- The laser should be safe within the confines of the machine, and cut-off automatically when the lid is open (although this should not be relied upon). The top window is safe to look through during a job, but do not attempt to interfere with these windows or the laser or in any way invent some way to look at the laser.
- Do not tamper with the laser cutter, or any interlocks. All side panels of the laser should always be closed and locked whilst the machine is plugged in.
- Do not put metal in the laser cutter.
Instructions
To use the laser cutter, you must have been trained and have had your name added to the trained user list; these instructions are not a substitute for this training. See the training section to understand how you can become qualified to use the laser cutter.
Although not a requirement, it is recommended someone else trained is also present when using the laser cutter. Having two pairs of eyes helps avoid forgotten steps, allows for double checking, clarifications and discussions, and ensures a greater pool of experience is both present and being built up as the laser is used.
Power Up
Give the machine a quick visual check. Make sure that there is nothing left on the bed, the water reservoir is normal, and that the equipment has no obvious damage or signs of being out-of-action. If the bed lloks like it has residue on it, give it a wipe with IPA and a cloth.
Turn on the air filter system to the right of the laser cutter using the green rocker switch. It should power up, make a decent amount of noise, and the lights should indicate the filter is in good condition (i.e. no need for replacement).
Make sure the lid is closed. Turn on the laser using the key on the right hand side. The inspection lamp should come on, a satisfying hum start up, and the cutter go into doing its self-checks and start the cooling water feed pump.
Before doing any job, the laser should be left to warm up for 4-5 mins. While the machine warms up, power on the adjacent PC and start the LaserCut application from the desktop.
Set the Focus
Before each job, the focus needs to be checked and set by adjusting the height of the bed, and thus the work piece, from the lens. The critical dimension here is 41mm and several gauges made of perspex will be left around the machine. This gauge needs to be a fit between the top surface of the material you intend to cut and the white plastic 'flap' on the lens piece. The height of the table is adjusted using the UP and DOWN buttons. Failure to set the distance correctly will result in an out of focus laser and much bigger (put lower powered) cut line. Always ensure there is clearance between the material and laser head before the head moves.
Load your Design
The PC software has an import facility which seems to be happy taking AutoCAD 2004 DXF files and other formats. The workspace of the laser bed is represented as the workarea in the LaserCut software. If the import doesn't do what you want size-wise, you can then select the whole image and the use the 'size' command from the drop down menu to set the dimension you want. Clicking on the three dots ... symbol will adjust the other axis in the same proportion. Selecting the 'centre on bed' option will locate your imported drawing on the centre of the machines cutting bed.
Assign Settings to Colours
Each part of your drawing that is assigned a different colour can have a different cut action assigned. Each colour will appear on the menu on the right hand side of the screen with numbers related to power and speed of the laser which will be used for the colour.
The main options are to Cut (line) or Engrave (raster fill). A marking on the material is a Cut. For each material and cutting depth required, a corresponding speed and power must be entered. The handbook provided with the machine gives suggested values for various materials but these should be considered as a starting point for a test. See the Power and Speed Settings section for our guidelines and experiences for these settings.
Download to the Cutter
To download, select Download and Download Current; the download option will by default call the file on the laser cutter 'LASER'.
Align the Job
Your drawing will feature a blue dot which represents the starting point of the laser, this is by default on the top right corner. The cutter's menu will show the most recent downloaded file highlighted. Pressing the 'test' button will make the head travel along the maximum extends of the cuts. This shows you that you have the material in the right place, and you have enough of it! You can do this repeatedly, opening the lid, moving the work place, closing the lid, test, until you have things where you want them.
Cut the Job
When happy with the location of the material, press 'start' to start the cutter. Watch the head and at least at first be prepared to press the 'stop' button immediately if you find you are burning massive holes in you work piece! This goes back to doing some tests on a sample of your material and making sure you are happy with the cut speeds and power you have selected. You should stay near the cutter at all times and be prepared to pause it or stop it in the event of fire.
DO NOT EVER LEAVE THE CUTTER UNATTENDED
Finishing
The end of the job is signified by a beep. Waiting a few moments for the exhaust pump to clear any remaining smoke is a good idea, especially with wood, and will limit the build up of smells in the rest of the workshop. Remove your work piece, ensuring that all parts are cleared from the bed of the machine.
Power Down
The cutter is turned off using the key switch, then the air filtering system with the green rocker switch. Shut down the PC and double check that everything is left in save state for the next user.
Clean the bed of debris using the soft brush, then wipe down the bed using IPA and a cloth.
Go away excited by what you can make and come back with lots more drawings!
Power and Speed Settings
In due time we will try to build up a sample stock of materials and record the values which work best. For example the book suggested a speed of 10 for 3mm MDF which on one sample was so slow it burned a massively thick line, 40 ended up as a better speed.
TODO: Reference values, mechanisms, guidelines for setting speeds and power
Maintenance
The maintenance of the Laser Cutter is organised by a small group of Laser Cutter Maintainers. See:
* Equipment/Laser_Cutter/Users Laser Cutter Users page
Maintenance Schedule
Continuous Maintenance (Every job, done by all Laser Cutter Users)
- Clean the laser bed with IPA and cloth
- Clean any debris off laser bed and surround using soft brush
Basic Maintenance (Every week, done by Laser Cutter Maintainers)
- Clean the laser lens with IPA and cotton buds
- Oil the 3 runners with 3-in-one light oil
- Thoroughly clean the laser bed with IPA and cloth
- Check the water level in the cooling tank
- Clean and remove debris from the machine base and catchment drawer
Full Maintenance (Every 4 weeks, done by Laser Cutter Maintainers)
- Check the water is clean in the cooling tank (i.e. no contamination/organic build up)
- Check filter unit for filter renewal
- Oil the 4 rise and fall lead screws with 3-in-one light oil
- Check mirrors and clean with a disposable sachet lens cleaner cloth (only if needed, mirror coatings are delicate)
- Work through mirror alignment procedure to check alignment of mirrors
Maintenance Log
Reactive Maintenance
- 15th Jan 2013, Simon Ford: Laser cutter not powering up, with switching on via key gives no activity whatsoever. No recollection of it cutting out during a job (Alexis), so assume it just stopped turning on at some point. Filter box and power sockets confirmed OK. Diagnosis: RCD in right back panel of Laser reset to off, no obvious reason why. Switching back on brought everything back to life OK.
Regular Maintenance
- Week Number, Date, Type, Maintainer (Notes)
2013
- Week 02, January 7, Full, Chris @ HPCLaser
- Week 03, January 14, Basic, Simon Ford
- Week 04, January 21,
- Week 05, January 28,
- Week 06, February 4,
- Week 07, February 11,
- Week 08, February 18,
- Week 09, February 25,
- Week 10, March 4,
- Week 11, March 11,
- Week 12, March 18,
- Week 13, March 25,
- Week 14, April 1,
Maintenance Shopping List
- 3-in-one light oil
- Cotton Buds
- Lens cleaner sachets
- Soft paint/cleaning brush
- Thermometer for water tank
- Hand held CO2 extinguisher
Further Information
LaserCut 5.3
* [Homepage] * [Manual]
Selection and Install
Purchase and Repairs
Full Purchase, Delivery and Installation (£6865.00+vat = £8238.00)
- LS 6090 PRO Laser engraving and cutting machine, 600mm by 900mm 60W (£5250.00+vat)
- Laser Fume Filter (£1250.00+vat)
- Delivery (£190+vat)
- Installation/Training (£175+vat)
Maintenance and Spares:
- 60 watt C02 laser tube (£275.00+vat)
- 50 mm Focus Meniscus Lens (£75.00+vat)
- Estimate for Call Out (£200.00)
Whilst tube lifetime is impacted a lot by usage and care, we will initially estimate the need to replace the laser tube every 6 months
Laser cutters used by other spaces
Model | Owner | Cost | Bed size | URL |
---|---|---|---|---|
HPC LS3060 | London Hackspace | 3250 | 290x570 | http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=39 |
HPC LS3020 | Nottinghack | 1125 | 300x210 | http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=40 |
Epilog Mini 24 40W | FabLab Manchester | (Estimated) 11450 | 300x600 | http://www.epiloglaser.co.uk/legend_mini24.htm |
For comparison, a 1200x900 laser cutter from Shenhui (who appear to be the internet's Chinese supplier of choice) comes in at US$4000 + US$250 seafreight + 4.5% import duty + delivery (or collection) from Felixstowe - that's roughly £2775 ex VAT.
Replacement tubes cost £195 ex VAT for a 40W HPC tube (LS3020/LS3060) and £350 ex VAT for an 80W (LS1290). They are rated at 1000 hours, although this is heavily dependent on careful calibration of the machine and will be much lower if it's misconfigured.
Questions and Requirements
- Cambridge Science Centre
- 600 x 900mm would allow use for exhibit units
- Thickness of materials?
- 25mm acrylic, 10-12mm ply (depending on ply)
- Do we need a cooler unit?
- No. More needed for continuous use (we expect regular but intermittent use)
- What are the power supply requirements?
- 240 V 50hz
How much power does the laser and the fume filter, require? I have looked on their website and it's not clear, I also had a looked on the Bofa Website for information about the fume filter, and there are too many models to be able select the correct model. When you next contact the supplier. Can you ask the following.
What size supply will each item require?
- TBC (nothing out of the ordinary)
I did read somewhere on the site, that the laser and the fume filter would be interlocked, is this correct? If so, this would suggest that only single supply would be required for both items. and one more question,
- The pumps are powered from the back of the laser cutter, but the filter is a separate supply
Does the laser need a assigned PC?
- Yes
- [User:Barhamd] I'm wanting to cut thin 1mm and .5mm ABS or perspex for model buildings. Would like something that can cut and half-cut a fine ~.25mm line. Not so concerned about massive size. Is this some kind of work something that could be done on a large cutter or do we need a smaller unit too?
- It states "Resetting position accuracy: 0.015mm"
- How often do the lasers need replacing?
- It depends on lots of things like care, use level, how much degradation is acceptable, luck - "could be 1 year or 5 years"; we will assume every year for now
What (if anything) can this do on metals?
- Possibly mark using a paste, but certainly can't cut
What sort of line thickness does it give?
- Laser width is approx 0.15mm
The bare minimum for me would be something capable of cutting an A3 sheet, which probably means 600x450mm. A 1200x900mm[1] machine from Laserscript comes in at about £6.5K; a used one went on eBay recently for something like £4.5K. The factory gate price for a similar unit from Shenhui, who are a well-regarded Chinese manufacturer, is $4K -sea-freight would come in at $250, and import duty appears to be 4.5%.
I (Dave from the science centre) would be really keen to be able to cut at least A1 on it (840x594mm) As this is the biggest module we are using at the moment.