Difference between revisions of "Shiny New LatheMillStuff"
From Makespace
(reformat, add belts) |
|||
| Line 1: | Line 1: | ||
From here: [http://www.warco.co.uk/] | From here: [http://www.warco.co.uk/] | ||
| − | *Slideway Lubricant Oil £6.90 | + | *Mill |
| − | *Edge Finder £7.50 | + | **Slideway Lubricant Oil £6.90 |
| − | *Drill Chuck Type : Key - B16 3-16mm £25.53 | + | **Edge Finder £7.50 |
| − | *Arbor Type : 3MT B16 £5.11 | + | **Drill Chuck Type : Key - B16 3-16mm £25.53 |
| − | * | + | **Arbor Type : 3MT B16 £5.11 |
| − | * | + | **Belts for mill (can't find on their site, but they must do them) |
| + | **Direct collets: | ||
| + | ***http://www.warco.co.uk/Collets/267-3mt-direct-collets.html | ||
| + | ***To fit a few standard sizes: 5mm, 10mm to fit 2mm,4mm centre drills | ||
| − | + | *Lathe | |
| − | * | + | **Live / Revolving Centres to fit lathe 2MT £23.49 |
| − | ** | + | **New dead centre |
| − | *Weighing scale for the honesty box. | + | *Misc |
| − | *Second metal "overflow" honesty box to live in office | + | **Weighing scale for the honesty box. |
| − | *New paintbrushes to clean up | + | **Second metal "overflow" honesty box to live in office |
| + | **New paintbrushes to clean up | ||
**green tape for it. | **green tape for it. | ||
Revision as of 19:42, 1 November 2014
From here: [1]
- Mill
- Slideway Lubricant Oil £6.90
- Edge Finder £7.50
- Drill Chuck Type : Key - B16 3-16mm £25.53
- Arbor Type : 3MT B16 £5.11
- Belts for mill (can't find on their site, but they must do them)
- Direct collets:
- http://www.warco.co.uk/Collets/267-3mt-direct-collets.html
- To fit a few standard sizes: 5mm, 10mm to fit 2mm,4mm centre drills
- Lathe
- Live / Revolving Centres to fit lathe 2MT £23.49
- New dead centre
- Misc
- Weighing scale for the honesty box.
- Second metal "overflow" honesty box to live in office
- New paintbrushes to clean up
- green tape for it.
