Revision as of 07:12, 20 December 2013 (view source) Cvoth (Talk | contribs) (→‎Trained Users) ← Older edit		Revision as of 22:23, 12 January 2014 (view source) HannahWray (Talk | contribs) (→‎Trained Users) Newer edit →
Line 123:		Line 123:
	* Piccardo Gheradi		* Piccardo Gheradi
	* Edward Imhagwe		* Edward Imhagwe
−		+	* Robert Hogg
		+	* Michal Stefanow

---

Revision as of 22:23, 12 January 2014

Equipment / 3D Printer / Training

3D Printer Training

This page documents the process for being trained on the 3D Printer, and the list of members who have completed that training.

Summary

Training takes place in three main steps:

• Group Training of 1-4 members, going through the equipment and how to use it (~1hr)
• Individual Training Task, where an individual member is set a task to complete to prove and improve understanding (~30min each)
• Project Oversight, where more experienced users oversee the projects being undertaken when cutting (first 2-3 projects)

Training on the 3D Printer is run by the 3D Printer Owners. The 3D Printer Owners are a group of people responsible for maintaining and training on the 3D Printer, and hence have been trained to train, and trained to perform the weekly and monthly maintenance on the 3D Printer.

Booking

Please add your name to free slots in training sessions below.

Notes:

• You can only be trained if you have your name allocated to a slot (groups will be restricted to four at a time, so please don't make up additional spaces)
• You must do the group and individual training on the same day

Trained Users

The following members of Makespace are trained and qualified to use the 3D Printer (note, they are not qualified to train others however):

• Chris Abri
• Rachel Rayns
• Tom Ingham
• Paul Osborn
• Moin Ali
• Andy Fisher
• Edward Imhagwe
• Yi Wei
• Errol McMullen
• Mark Watson
• Catarina Violante
• Maciek Piatek
• Adrian van den Heever
• Brian Corteil
• Rod Williams
• Peter Provis
• Ben Evans
• Roeland Schumacher
• Archie Reid
• Adrian Carr
• Ward Hills
• Paul Holland
• Pop Sharma
• Patrick Greaney
• Kevin Latter
• Martin de Selincourt
• Alexis Mather
• Andrew Dunn
• Hannah Wray
• Anne Harrison
• Ben Alper
• Ajith Shadakshari
• Mark Mellors
• Toby Moncaster
• Alan Tennant
• Jake Young
• John Sturdy
• David Bebb
• Ben Wheatley
• Diana Probst
• Richard Mitchell (mandatory only)
• Christie Nel (mandatory only)
• Andrew Lipson (mandatory only)
• Toby Roberts (mandatory only)
• Dan Tidhar
• Jennifer Herbert
• Matthew Ireland
• Harry Braviner
• Saar Drimer
• Robert Hoff
• Daniel Garden
• Armando Carlone
• Marcin Izo
• James Hutton (mandatory only)
• Anthony Wainman (mandatory only)
• Jia Wei Lim (mandatory only)
• Julius Schmidt (mandatory only)
• Hazel Jenkins (mandatory only)
• Benjamin Kidder (mandatory only)
• Joshua Keeler (mandatory only)
• Simon Birrell (mandatory only)
• John Simm (mandatory only)
• Theo Sanderson (mandatory only)
• Jon Aas (mandatory only)
• Stephen Jeapes (mandatory only)
• Anna Stoilova (mandatory only)
• Jim Dilks (mandatory only)
• Katia Dilks (mandatory only)
• Aleksandar Tomic (mandatory only)
• Gaye Saykok (mandatory only)
• Fergus Riche (mandatory only)
• David Barham (Mandatory only)
• Marco Aita (Mandatory only)
• Jason White (Mandatory only)
• Brian Starkey (Mandatory only)
• David Cox (Mandatory only)
• Matt Grimes (Mandatory only)
• Tim Regan (Mandatory only)
• Stuart Wilson (Mandatory only)
• Andy Spencer (Mandatory only)
• Ester Leighton (Mandatory only)
• Richard Fosh (Mandatory only)
• Peter Knight
• John Campbell
• Arun Rao
• Peter Mottram
• Marcin Zaba
• Jon Green
• Dave Potts
• Reid Potts
• Mark Roberts
• Piccardo Gheradi
• Edward Imhagwe
• Robert Hogg
• Michal Stefanow

Delayed training blacklist:

Now on the wall in Makespace, near the 3D printers.

Training Cheatsheet

The training structure and prompt sheet. Please note, this is used by the 3D Printer Owners as a prompt to ensure training is executed in a consistent and complete fashion is included on this page; this does not constitute and is not a substitue for the training itself.

Group Training

The group training introduction structure, suitable for 1-4 members at a time in a 1 hr session.

Introduction of main components

• Printer
• PC
• Materials

Checks for everyone to do

• Check in use, looks ok

Powering Up

• Turning on

Project walkthrough

• Package function, import file types, location, scale

Printer Operation

• Start, pause and emergency stop function
• Do job, pause/open lid, restart

Hazards

• --
• Ensure confident of process

Power Down

• Switch off
• Switch off PC

Individual Training Task

The individual task to get familiar, prompt questions and check understanding:

Task

• Make something?
• Should demonstrate import, setup, position and run
• possible examples (around 10m printing time)
  • plain_game_tokes 1/2/5
  • SpaceShuttle-small
  • CookieCutter_apple_small

Steps

• Set individual to work, don't prompt but do answer questions (or pose if needed)
• Talk through design once done, question/check things etc
• Proceed to printing (watch carefully all steps)

Assuming all ok:

• Get them to read the health and safety notes about operation and materials
• Add to the trained member list!

Project Oversight

For next 2-3 projects, ensure member will find another more experienced trained user to support them (second pair of eyes)