Difference between revisions of "Equipment/CNC Metal Mill"
From Makespace
| Line 65: | Line 65: | ||
|105 | |105 | ||
|Resins such as chemical wood and modeling wax, 4,500 to 15,000 rpm, optional scanner head (~295) | |Resins such as chemical wood and modeling wax, 4,500 to 15,000 rpm, optional scanner head (~295) | ||
| + | |- | ||
| + | |Modela MDX-20 | ||
| + | |[http://www.rolanddg.co.uk/products/rapid-prototyping/mdx-20_15/ link] | ||
| + | |2799 | ||
| + | |200 | ||
| + | |150 | ||
| + | |60 | ||
| + | |Wood, Plaster, Resin (modeling wax, styrenform), Chemical wood, Aluminum (A5052 according to JIS),Brass, 6500 rpm, includes scanning head | ||
|- | |- | ||
|} | |} | ||
Caveats: These were mostly based on searching out of interest in PCB production. Prices are almost certainly not correct, extras may be needed and VAT is probably not includede - use as a guide only. | Caveats: These were mostly based on searching out of interest in PCB production. Prices are almost certainly not correct, extras may be needed and VAT is probably not includede - use as a guide only. | ||
Revision as of 22:21, 22 January 2013
A CNC Milling Milling Machine is a computer controlled tool that uses a rotating cutting tool to cut into a stationary workpiece.
Here's a nice video showing the basic movement of both CNC and manual vertical mills - N.B. the guy in the video shouldn't be wearing gloves, as they can cause very nasty accidents if your hand comes into contact with the cutter!
Just a quick table on a few small CNC mills I found available readily in the UK -
| Machine | URL | Price (UKP) | Size - X | Size - Y | Size - Z | Notes |
| iModela | link | 500 | 80 | 55 | 26 | |
| Heiz S400 | link | 1595 | 400 | 300 | 110 | |
| Heiz S720 | link | 1995 | 720 | 420 | 110 | |
| Sieg KX1 | link | 3135 | 260 | 115 | 185 | |
| Modela Pro MDX-540 | link | 13995 | 500 | 400 | 155 | Plastic resin and light metal, 400 to 12,000 rpm, |
| Modela MDX-40A | link | 5499 | 305 | 305 | 105 | Resins such as chemical wood and modeling wax, 4,500 to 15,000 rpm, optional scanner head (~295) |
| Modela MDX-20 | link | 2799 | 200 | 150 | 60 | Wood, Plaster, Resin (modeling wax, styrenform), Chemical wood, Aluminum (A5052 according to JIS),Brass, 6500 rpm, includes scanning head |
Caveats: These were mostly based on searching out of interest in PCB production. Prices are almost certainly not correct, extras may be needed and VAT is probably not includede - use as a guide only.
