Difference between revisions of "CreatingScreenprintingStencils"
From Makespace
(Created page with "== Creating a Stencil == These instructions describe how to create a stencil using methods available at Makespace -- cut paper and cut sticky vinyl. === Summary === # Choos...") |
(→Summary) |
||
| Line 6: | Line 6: | ||
# Choose the method best suited to your design | # Choose the method best suited to your design | ||
| − | # Choose lasercut or handcut paper or cut sticky vinyl. | + | # Choose lasercut or handcut '''paper''' or cut '''sticky vinyl'''. Note: only people trained on the lasercutter can use it. |
| − | Note: only people trained on the lasercutter can use it. | + | # Pay for any newsprint paper and/or sticky vinyl used |
| − | # Pay for any sticky vinyl used | + | |
=== Paper stencils === | === Paper stencils === | ||
Revision as of 19:07, 18 December 2015
Contents
Creating a Stencil
These instructions describe how to create a stencil using methods available at Makespace -- cut paper and cut sticky vinyl.
Summary
- Choose the method best suited to your design
- Choose lasercut or handcut paper or cut sticky vinyl. Note: only people trained on the lasercutter can use it.
- Pay for any newsprint paper and/or sticky vinyl used
Paper stencils
- Use newsprint paper (50 gsm). This is thin and will cling to the screen when wetted with ink.
Advantages / limitations
- Suited to designs without 'islands' (for example the middle of a letter 'o')
- No manual 'weeding' or peeling required to transfer to screen. No masking off required.
- Design does not need to be reversed.
Sticky vinyl stencils
Advantages / limitations
- Can support stencils with 'islands' but note that larger lettering and designs work better than more detailed ones.
- Reverse the design beforePrint design in reverse, to be stuck onto the underside of the screen, closest to the workpiece.
