Difference between revisions of "Equipment/WarcoMill/Training"
(→Trained Users) |
|||
| Line 8: | Line 8: | ||
All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill. | All trained users must sign a [https://docs.google.com/document/d/1fKSRiY0_zrLGFZ47uiUYaxeDdCYLk91etjuxltmfV2k/edit?usp=sharing safety work-list] before being signed off as competent on the Warco mill. | ||
| + | |||
| + | [https://docs.google.com/document/d/1KPPw1OwN7D-TMQzobgz16y-45bzThrTzN4ESXfJ-LtU/edit?usp=sharing Lesson 1 script] | ||
As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills] | As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. [http://techtv.mit.edu/collections/ehs-videos/videos Introduction to Machine Shop Tools and Skills] | ||
Revision as of 19:38, 21 January 2016
Contents
Training
THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.
Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.
All trained users must sign a safety work-list before being signed off as competent on the Warco mill.
As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. Introduction to Machine Shop Tools and Skills
Owners
- Mat Cook
- Diana Probst
- Roger Smith
Trainers
- Diana Probst
- Mat Cook
- Jonathan Waite
Trained Users
Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.
| User | Trained level | Mill access |
|---|---|---|
| Diana Probst | --- | Trainer |
| Jonathan Waite* | --- | Trainer |
| Stevan Wing | Intro | Use while supervised |
| Matthew Taylor | Initial Guide and Lesson A | Timed Out: start from beginning |
| Steve O | Initial Guide and Lessons A - C (conversion) | Continued teaching |
| John Sturdy* | Initial Guide and Lessons A - C | Continued teaching |
| Ben Alper* | Initial Guide and Lessons A - C | Continued teaching |
| Ben Evans* | Initial Guide and Lessons A - C | Continued teaching |
| Rob Rescorla* | Initial Guide and Lessons A - C | Continued teaching |
| Shareef Jalloq* | Initial Guide and Lessons A - C | Continued teaching |
| Robert Karpinski* | Initial Guide | Continued teaching |
- indicates user has read and signed safe use document
