Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven
From Makespace
Okay ish setting s for 125micron mylar:
400mm/s
42%
0.1mm over scan
rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.
Try reducing the cut, still some webs blew through.
ToDo seperate page for stencils/SMD HowTo
--Pinski1 (talk) 22:40, 4 August 2015 (BST)
Using a ULP in eagle to export top and botom cream layers as poly-lines in a DXF.
script: https://github.com/SWITCHSCIENCE/ssci-eagle-public/blob/master/cream-dxf.ulp
--Pinski1 (talk) 18:37, 5 August 2015 (BST)
CUSF's myarl stencils are cut with:
500mm/s
50%
0.05mm over scan
and rotate stencil 45°
