CreatingScreenprintingStencils

Creating a Stencil

These instructions describe how to create a stencil using methods available at Makespace -- cut paper and cut sticky vinyl.

Summary

1. Choose the method best suited to your design
2. Choose lasercut or handcut paper or cut sticky vinyl.

Note: only people trained on the lasercutter can use it.

1. Pay for any sticky vinyl used

Paper stencils

• Use newsprint paper (50 gsm). This is thin and will cling to the screen when wetted with ink.

Advantages / limitations

• Suited to designs without 'islands' (for example the middle of a letter 'o')
• No manual 'weeding' or peeling required to transfer to screen. No masking off required.
• Design does not need to be reversed.

Sticky vinyl stencils

Advantages / limitations

• Can support stencils with 'islands' but note that larger lettering and designs work better than more detailed ones.
• Reverse the design beforePrint design in reverse, to be stuck onto the underside of the screen, closest to the workpiece.