LaserCut53Notes (Laser Cutter Notes and FAQ)

From Makespace
Revision as of 19:36, 1 July 2018 by Miguel (Talk | contribs)

Jump to: navigation, search
  1. Failure in "Download current" #

If it appears to talk to the laser, but "Download Current" does not work, it's because LaserCut cannot write to a couple of files in C:\ root. Temp workaround: run as admin. Full workaround: update permissions for these files.

  1. Unable to change power of Engrave #

If you can change the speed in engrave mode and every other setting in cut mode, but not the power in engrave mode (e.g., it's stuck at 15), then change **both** the power and the speed, which unlocks the setting of power.

Retrieved from "http://wiki.makespace.org/index.php?title=LaserCut53Notes_(Laser_Cutter_Notes_and_FAQ)&oldid=29754"