Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven

From Makespace
< Talk:Equipment
Revision as of 21:40, 4 August 2015 by Pinski1 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Okay ish setting s for 125micron mylar: 400mm/s 42% rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.


ToDo seperate page for stencils/SMD HowTo

--Pinski1 (talk) 22:40, 4 August 2015 (BST)

Retrieved from "http://wiki.makespace.org/index.php?title=Talk:Equipment/Electronics_Workbenches/T-962A_Reflow_Oven&oldid=28385"