Equipment/Fine metalwork bench consumables
From Makespace
Revision as of 17:39, 4 July 2013 by MattPendlebury (Talk | contribs)
Printable table of stock costs
| Item | Cost | Unit | Comment |
|---|---|---|---|
| Saw blades: | £0.30 | each | per broken sawblade or if you want your own. |
| Abrasive paper: | £0.75 | per sheet | |
| Abrasive Paper | £0.20 | per quarter sheet | |
| Small drills: | £1.00 | per broken drill | (the set of 20 Drills 0.3-1.6mm is around £14 + shipping) |
| Copper sheet 24 SWG (0.56mm): | £0.04 | per square cm | |
| Copper sheet 20 SWG (0.91mm): | £0.05 | per square cm | |
| Sterling Silver Sheet 1.00mm: | £1.00 | per square cm | (measuring the aligned bounding box) (cost is £46 for 75x75mm) |
| Sterling Silver Sheet 0.50mm: | £0.50 | per square cm | (measuring the aligned bounding box) (cost is £25 for 75x75mm) |
| Sterling Silver Round Wire 1.00mm: | £0.10 | per cm (cost is £14.24 per 2m) | |
| Sterling Silver Round Wire 0.70mm: | £0.05 | per cm (cost £3.52 per 1m) | |
| Sterling Silver Round Wire 0.50mm: | £0.03 | per cm (cost £3.52 per 2m) | |
| Sterling Silver Square Wire 1.00mm: | £0.10 | per cm (cost £4.34 per 0.5m) | |
| Sterling Silver Hook Wire (NVK 023X): | £1.30 | per pair | |
| Sterling Silver Ear Pin, 11.1 X 0.8 (NVJ 102X): | £0.10 | each | |
| Sterling Silver Scrolls 110: | £0.15 | each | |
| Sterling Silver Round Snake Chain 18"/45cm 1.2mm (VVO R12H): | £5.50 | each | |
| Silver 1.6mm Snake Chain 18"/45cm (VV3 80H): | £6.00 | each |
Miscellaneous other Consumables
- hard silver solder paste (£33.61 per tube, but a tube lasts a long time) [5]
- polish and polishing wheels (buy your own if making substantial use of these)
- Picklean Safe Pickling Powder (£6 for 150g)
- Diamond burrs (£4.80 for set of 30)
