Difference between revisions of "Electrical systems"

From Makespace
Jump to: navigation, search
(Created page with "Electrical Systems The electrical supplies at Makespace are very confusing, there are at lest five distribution broads supplying the circuits in Makespace. Over the 2012 Christm...")
 
Line 1: Line 1:
Electrical Systems
+
== '''Electrical Systems''' ==
  
The electrical supplies at Makespace are very confusing, there are at lest five distribution broads supplying the circuits in Makespace. Over the 2012 Christmas break, a quick survey was done. The following was found.
+
The electrical supplies at Makespace are very confusing, there are at lest five distribution broads supplying the circuits in Makespace. The sockets in Makespace are not protected by RCDs, there are plans to address this in the near future.
  
*Class room
+
Over the 2012 Christmas break, a quick survey was done and the following was found.
 +
 
 +
 
 +
=== '''Class room''' ===
  
 
the class room, circuits are feed from a distribution broad located outside of Makespace and was not checked.
 
the class room, circuits are feed from a distribution broad located outside of Makespace and was not checked.
  
*Corridor
+
 
 +
=== '''Corridor''' ===
  
 
the corridor, circuits are feed from a distribution broad located outside of Makespace and was not checked.
 
the corridor, circuits are feed from a distribution broad located outside of Makespace and was not checked.
  
*Main Workshop
+
 
 +
=== '''Main Workshop''' ===
  
 
The main workshop circuits are fed from the two distribution broads located in the workshop shop. The left hand broad supplies power for the lighting and sockets in the main workshop(lighting only), kitchen, quiet room, store room and the right hand distribution broad. The sockets in the main workshop are fed from the right hand distribution broad. The right hand distribution broad circuits are protected via a electrical contactor, when any of the red emergency stop buttons in the workshop are operated, the supply to the right hand broad is isolated, and therefore any circuits supplied from it will also be isolated.
 
The main workshop circuits are fed from the two distribution broads located in the workshop shop. The left hand broad supplies power for the lighting and sockets in the main workshop(lighting only), kitchen, quiet room, store room and the right hand distribution broad. The sockets in the main workshop are fed from the right hand distribution broad. The right hand distribution broad circuits are protected via a electrical contactor, when any of the red emergency stop buttons in the workshop are operated, the supply to the right hand broad is isolated, and therefore any circuits supplied from it will also be isolated.
  
* Secure Workshop  
+
 
 +
=== '''Secure Workshop''' ===
  
 
The secure workshop lighting is feed from a distribution broad located outside of Makespace and was not checked.
 
The secure workshop lighting is feed from a distribution broad located outside of Makespace and was not checked.
  
The sockets in the Secure workshop are fed from the distribution broad located in the secure workshop. The distribution broad is protected via a electrical contactor, when any of the red emergency stop buttons in the secure workshop are operated, the supply to the right hand broad is isolated, and therefore any circuits supplied from it will also be isolated. The sockets in the secure workshop are spilt into three circuits.
+
The sockets in the Secure workshop are fed from the distribution broad located in the secure workshop. The distribution broad is protected via a electrical contactor, when any of the red emergency stop buttons in the secure workshop are operated, the supply to the distribution broad is isolated, and therefore any circuits supplied from it will also be isolated. The sockets in the secure workshop are spilt into three circuits. A 32A ring main, 16A circuit control with a switched spur and a 10A high level socket.
 +
 
 +
 
 +
=== '''Office''' ===
 +
 
 +
The office lighting and sockets are fed from it's own distribution broad. This distribution broad is over 20 years old, since the office space is not going to be used for making, I don't see the need for the sockets to be RCD protected as long as the equipment used within the office is only IT equipment.
 +
 
 +
 
 +
=== '''Kitchen''' ===
 +
 
 +
The kitchen lighting and power is fed from the Main Workshop left hand distribution broad.
 +
 
 +
=== '''Quiet Room''' ===
 +
 
 +
The Quiet room lighting and power is fed from the Main Workshop left hand distribution broad. The low level and high level sockets are fed from different circuits.
 +
 
 +
==='''Store Room'''===
 +
 
 +
The Store room is fed from the Main Workshop left hand distribution broad.
 +
 
 +
 
 +
----
 +
 
 +
 
 +
== Faults ==
 +
 
 +
If you find a fault with any part of the electrical system at Makespace, stop using it, label it as faulty and please log it here, and inform Brian Corteil, or one of the directors or a trusted member.

Revision as of 15:19, 5 January 2013

Electrical Systems

The electrical supplies at Makespace are very confusing, there are at lest five distribution broads supplying the circuits in Makespace. The sockets in Makespace are not protected by RCDs, there are plans to address this in the near future.

Over the 2012 Christmas break, a quick survey was done and the following was found.


Class room

the class room, circuits are feed from a distribution broad located outside of Makespace and was not checked.


Corridor

the corridor, circuits are feed from a distribution broad located outside of Makespace and was not checked.


Main Workshop

The main workshop circuits are fed from the two distribution broads located in the workshop shop. The left hand broad supplies power for the lighting and sockets in the main workshop(lighting only), kitchen, quiet room, store room and the right hand distribution broad. The sockets in the main workshop are fed from the right hand distribution broad. The right hand distribution broad circuits are protected via a electrical contactor, when any of the red emergency stop buttons in the workshop are operated, the supply to the right hand broad is isolated, and therefore any circuits supplied from it will also be isolated.


Secure Workshop

The secure workshop lighting is feed from a distribution broad located outside of Makespace and was not checked.

The sockets in the Secure workshop are fed from the distribution broad located in the secure workshop. The distribution broad is protected via a electrical contactor, when any of the red emergency stop buttons in the secure workshop are operated, the supply to the distribution broad is isolated, and therefore any circuits supplied from it will also be isolated. The sockets in the secure workshop are spilt into three circuits. A 32A ring main, 16A circuit control with a switched spur and a 10A high level socket.


Office

The office lighting and sockets are fed from it's own distribution broad. This distribution broad is over 20 years old, since the office space is not going to be used for making, I don't see the need for the sockets to be RCD protected as long as the equipment used within the office is only IT equipment.


Kitchen

The kitchen lighting and power is fed from the Main Workshop left hand distribution broad.

Quiet Room

The Quiet room lighting and power is fed from the Main Workshop left hand distribution broad. The low level and high level sockets are fed from different circuits.

Store Room

The Store room is fed from the Main Workshop left hand distribution broad.




Faults

If you find a fault with any part of the electrical system at Makespace, stop using it, label it as faulty and please log it here, and inform Brian Corteil, or one of the directors or a trusted member.