Difference between revisions of "Equipment/CNC Router/Hand Controller"

From Makespace
Jump to: navigation, search
(CNC Router Hand Controller)
Line 4: Line 4:
  
  
This page gives you detailed information on how to use the HPC CNC Router Hand Controller.
+
The purpose of this page is to act as a guide for those who are not yet fully familiar with all the functions or key commands that operate the CNC Router. The tables below can be used while operating the machine as a quick "look-up" guide.
  
 
For more in depth reading, the Router Manual can be found here in PDF form. [http://wiki.makespace.org/File:MPC6610_CNC_Router_Manual_v1.0-En.pdf Router Manual]
 
For more in depth reading, the Router Manual can be found here in PDF form. [http://wiki.makespace.org/File:MPC6610_CNC_Router_Manual_v1.0-En.pdf Router Manual]
  
However, for a more concise, quick look-up guide you can reference the information below.
 
  
 
= Lookup Tables =
 
= Lookup Tables =

Revision as of 12:10, 25 June 2013

Equipment / CNC Router / Hand Controller

CNC Router Hand Controller Guide

The purpose of this page is to act as a guide for those who are not yet fully familiar with all the functions or key commands that operate the CNC Router. The tables below can be used while operating the machine as a quick "look-up" guide.

For more in depth reading, the Router Manual can be found here in PDF form. Router Manual


Lookup Tables

Zeroing

Loading & Starting a Job

Speed Control

Emergency Situation