Difference between revisions of "Equipment/CNC Router/Hand Controller"

From Makespace
Jump to: navigation, search
(Lookup Tables)
(Lookup Tables)
Line 11: Line 11:
 
= Lookup Tables =
 
= Lookup Tables =
  
[[Image:Keypad.png]]
+
[[Image:Keypad.png|300px]]
  
 
== Zeroing ==
 
== Zeroing ==
 +
 +
Set the X-Y home:  7
 +
 +
[[Image:Router-7.png|50px]]
 +
 +
 +
Set the Z home to the current position: 8
 +
 +
[[Image:Router-8.png|50px]]
 +
 +
 +
Set the Z home to the top of material using sensor: OK + 8
 +
 +
[[image:Router-OK.png|50px]] + [[Image:Router-8.png|50px]]
 +
 
== Loading & Starting a Job ==
 
== Loading & Starting a Job ==
 
== Speed Control ==
 
== Speed Control ==
 
== Emergency Situation ==
 
== Emergency Situation ==

Revision as of 01:04, 27 June 2013

Equipment / CNC Router / Hand Controller

CNC Router Hand Controller Guide

The purpose of this page is to act as a guide for those who are not yet fully familiar with all the functions or key commands that operate the CNC Router. The tables below can be used while operating the machine as a quick "look-up" guide.

For more in depth reading, the Router Manual can be found here in PDF form. Router Manual


Lookup Tables

Keypad.png

Zeroing

Set the X-Y home: 7

Router-7.png


Set the Z home to the current position: 8

Router-8.png


Set the Z home to the top of material using sensor: OK + 8

Router-OK.png + Router-8.png

Loading & Starting a Job

Speed Control

Emergency Situation