Equipment/CNC Router/Hand Controller

From Makespace
Revision as of 02:17, 27 June 2013 by Perfectphase (Talk | contribs)

Jump to: navigation, search

Equipment / CNC Router / Hand Controller

CNC Router Hand Controller Guide

The purpose of this page is to act as a guide for those who are not yet fully familiar with all the functions or key commands that operate the CNC Router. The tables below can be used while operating the machine as a quick "look-up" guide.

For more in depth reading, the Router Manual can be found here in PDF form. Router Manual


Lookup Tables

Keypad.png

Zeroing

Set the X-Y home: 7

Router-7.png


Set the Z home to the current position: 8

Router-8.png


Set the Z home to the top of material using sensor: OK + 8

Router-OK.png + Router-8.png


Move to origin: OK + Origin

Router-OK.png + Router-origin.png

Loading & Starting a Job

Speed Control

Change the rapid speed when manually moving the tool: High/Low

Router-highlow.png


Increase the feed rate while job is running: Shift-Up

Router-shiftup.png


Decrease the feed rate while job is running: Shift-Down

Router-shiftdown.png

Emergency Situation

Pause: Run/Pause

Router-run.png

Resume from pause: Run/Pause

Router-run.png

Retrieved from "http://wiki.makespace.org/index.php?title=Equipment/CNC_Router/Hand_Controller&oldid=2948"