Difference between revisions of "Equipment/Drill Presses"
MarkMellors (Talk | contribs) (created content) |
MarkMellors (Talk | contribs) |
||
| Line 2: | Line 2: | ||
[[File:SmallPillarDrill.jpg|thumb|460px|right|Small Pillar Drill]] | [[File:SmallPillarDrill.jpg|thumb|460px|right|Small Pillar Drill]] | ||
| − | [[File: | + | [[File:largePillarDrill2.jpg|thumb|460px|right|Floor standing pillar drill]] |
= Summary = | = Summary = | ||
Revision as of 22:14, 3 April 2013
Equipment / Drill Press
Contents
Summary
A pillar drill/drill press is an electrical motor that rotates a replaceable drill bit to make a hole in wood, plastic, or metal. The parts of a pillar drill include the handle, an on/off switch with a reversing for changing the rotation direction of the drill bit, a drive belt and gearbox for speed adjustment, and the chuck that holds the drill bit in place.
Owners
Health and Safety
Sharp Object/material
- All drills to be kept in their holders until they are required.
- Wait for the drill bit to stop moving before using the chuck.
Slips, Trips and Falls
- Waste material/offcuts to be kept clear of work area.
Fire
- Equipment will be checked for defects before each use to minimise the risk of possible electrical faults or fire.
- Carbon Dioxide extinguisher to be available for any electrical fires
Electric shock
- The equipment will be checked monthly to ensure that there are no defects in the wiring, switch and motor.
Sight/Noise/Dust/Vibration
- P.P.E. to be worn when using the equipment.
Training
Instructions
If you've never used a pillar drill before, please watch this video first Drill Safety & operation (Video)
Never wear loose clothing or dangling jewellery which could catch in the drill as you lean over it. And always wear eye goggles to protect yourself from flying dust and swarf.
The drill bit will become hot with use so keep you hands off it.
Make sure you use the correct drill bit for the type of material you are drilling into. For example use a wood bit for timber and a high-speed steel bit for metal.
Tips & Tricks
- Keep work area clean and well lit. Cluttered and dark areas invite accidents.
- Keep bystanders away while operating the drill. Distractions can cause you to lose control.
- Remove the chuck key before turning the drill on. A key left attached may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Do not wear gloves.
Maintenance
Every month inspect for damage and general wear and tear (including drive belt).
