Difference between revisions of "Equipment/Electronics Workbenches"
From Makespace
(Document that we have a microscope in this area) |
(→Want) |
||
| Line 63: | Line 63: | ||
* 100MHZ Digital Oscilloscope | * 100MHZ Digital Oscilloscope | ||
** Possibly a Rigol [http://www.rigolna.com/products/digital-oscilloscopes/ds1000Z/ds1104z/ DS1104Z], a 4 channel 100MHz scope | ** Possibly a Rigol [http://www.rigolna.com/products/digital-oscilloscopes/ds1000Z/ds1104z/ DS1104Z], a 4 channel 100MHz scope | ||
| + | ** DONE! | ||
* A Reflow Oven | * A Reflow Oven | ||
** Probably a EuroCircuits [http://be.eurocircuits.com/shop/offtheshelf/product.aspx?ano=ec-reflow-mate EC-Reflow Mate] | ** Probably a EuroCircuits [http://be.eurocircuits.com/shop/offtheshelf/product.aspx?ano=ec-reflow-mate EC-Reflow Mate] | ||
Revision as of 14:36, 23 October 2014
Equipment / Electronics Workbenches
Workbenches for electronics and precision work.
Contents
Enthusiast Bench
A 1800mm x 900mm ESD cantilever bench from here
Equipment
- Hameg HM-203-5 20MHz analogue oscilloscope
- Black*Star Jupiter 500 0.1Hz-500kHz function generator (sine, square, sawtooth)
- Philips PM6622 80MHz counter
Expert Bench
A 1800mm x 900mm ESD cantilever bench from here
Equipment
- BlackJack BK6000 Rework station
- Philips PM 3217 50MHz analogue Oscilloscope
- Thurlby Thandar TG212 0.1Hz-2MHz function generator (sine, square, sawtooth)
- Thurlby Thandar TF830 1.3GHz high resolution reciprocal measurement
- Soldering irons:
- 2x Tenma AT60D soldering stations (up to 400C)
- Bench power supplies (e.g. a mix of 5V, 12V, variable, and multi-rail PSUs)
- Farnell AP20-80: up to 20V at up to 80A
- Hameg HM7042-3 dual: each channel up to 32V at up to 2A
- Tenma 72-8695 two channels each up to 32V at up to 3A, plus a single fixed 5V/2A channel
- Logic analyser:
- HP 16500A (status unknown: may not be operational but has probes pack)
- Currently assumed dead.
- Components and small tools
- PCB holders or "helping hands"
- Magnifying lamps
- Side cutters
- Multimeters
- Wire
- Selection of basic components (res, caps, v-reg, basic digital logic, basic IC's - 555,358, connectors, cable)
- Inspection microscope (fixed 20x monocular, with 80mm clearance under the lens)
Notes
It would be nice if someone could dig out URLs for manuals for the above, if available, and link to them from their listing lines.
Wishlist
Need
- Abrasive pen
- Heatsink tweezers
- Tweezers
- ESD handling equipment, eg. anti-static mats, wrist-strap, earth points, tester
Want
- Logic Analyser
- Possibly a Saleae Logic16
- 100MHZ Digital Oscilloscope
- Possibly a Rigol DS1104Z, a 4 channel 100MHz scope
- DONE!
- A Reflow Oven
- Probably a EuroCircuits EC-Reflow Mate
Would Be Nice
- USB microscope with monitor
- Spectrum Analyser
- A PC
