Equipment/VacuumFormer

From Makespace
Revision as of 12:43, 26 July 2013 by Perfectphase (Talk | contribs)

Jump to: navigation, search

Class Orange equipment: Only use if you are confident doing so. Training is available if not.
(More about equipment classes)

Equipment / Vacuum Former
Vacuum Former

WORK IN PROGRESS

This page is a work in progress, the Vacuum Former should be installed in the space on 26/7/2013

Summary

Vacuum forming is a technique that is used to shape a variety of plastics. It is used to form/shape thin plastic, usually plastics such as; polythene and perspex. Vacuum forming is used when an unusual shape like a ‘dish’ or a box-like shape is needed.

http://www.youtube.com/watch?v=scqkjU10198

Formech 300XQ

Technical Specifications

  • Material size 450x300mm / 18x12"
  • Forming area 430x280mm / 17x11"
  • Max. depth of draw 160mm / 6.3"
  • Max. material thickness 6mm / .25"
  • Overall width 650mm / 25"
  • Overall height 530mm / 20"
  • Overall depth 970mm / 38"
  • Weight 75kg / 165lbs

Here are some examples we've made on the Vacuum Former(please add a photo of yours any time you do a job!)

Using the Vacuum Former

Owners

The Owners are those who have volunteered to be in charge of the equipment, organising maintenance, training others to use it, and generally being a point of contact. The current Owners of the Vacuum Former are:

  • Stephen Woolhead
  • New owners welcomed, get in touch!

If you have any questions, problems or concerns around the Vacuum Former, please use the mailing list thread:

Training

No formal training is required to operate the Vacuum Former. If you intend to make something using the vacuum former please read the Health & Safety and Safety Notes sections below before doing so. The manual is also available online in case you require additional information.

Informal training sessions will be listed in the Meetup diary

Requests for more sessions, or discussion about them should be directed to the discussion thread: Training:Vinyl Cutter

Health and Safety

Risk assessment: Equipment/VacuumFormer/RiskAssessment

The Vacuum Former is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the Vacuum Former are:

  • ONLY USE THE VACUUM FORMER IF YOU ARE ON THE LIST OF TRAINED USERS
  • NEVER LEAVE THE VACUUM FORMER RUNNING UNATTENDED

As a trained user, you should be very aware of the following risks and how to deal with them:

FIRE - Heating the material for too long or with the wrong settings could result in the material igniting.

ELECTRIC SHOCKS - Regular maintenance & electric survey should mean machine is safe to use. Do not use if there are any signs of damage

BURNS - Caution should be taken when using machine, ensure formed part is cool before removing. Never operate with missing or damaged safety features.

Instructions

1. First, a former is made from a material such as a soft wood. The edges or sides are shaped at an angle so that when the plastic is formed over it, the former can be removed easily.

2. The former is placed in a vacuum former at the lowest position.

3. A sheet of plastic (for example, compressed polystyrene) is clamped in position above the mould.

4. The heater is then turned on and the plastic slowly becomes soft and pliable as it heats up. The plastic can be seen to 'warp' and 'distort' as the surface expands.

5. After a few minutes the plastic is ready for ‘forming’ as it becomes very flexible.

6. The heater is turned off and the mould is moved upwards by lifting the lever until it locks in position.

7. The 'vacuum' is turned on and this pumps out all the air beneath the plastic sheet. Atmospheric pressure above the plastic sheet pushes it down on the mould. At this stage the shape of the mould can be clearly seen through the plastic sheet. When the plastic has cooled sufficiently the vacuum pump is switched off.

8. The plastic sheet is removed from the vacuum former. The sheet has the shape of the former pressed into its surface.

9. The excess plastic is trimmed so that only the plastic required remains - the completed item.

Heating times

Different materials and thickness require different heating times, here is a list that has been found to produce good results

?????

Tips & Tricks

Material Stock

If you have any requests for material stock, please add them the Log.

Stock material will be provided and an honesty box will be provided.


Maintenance

The maintenance of the Vacuum Former is carried out by the Owners, with some basic maintenance being carried out by Users on every job.

Maintenance Schedule

Every job


As required, by users


Monthly


Maintenance Log

Installed on 26th July 2013. (with any luck)


Maintenance Shopping List

  • Service Kit (~£50)


Further Information

Installation

Installed on 9th May 2013.

Purchase

Full Purchase, Delivery and Installation (£2500)

Notes