Equipment/VacuumFormer/RiskAssessment

From Makespace
Jump to: navigation, search

Risk assessment form for Vacuum Former

Equipment / Vacuum Former

Activity

Vacuum forming plastic material

Hazard identification

Consider the hazards involved in conducting this activity and list each hazard

1. Fire

2. Burns

3. Electric Shock

Persons at risk

Consider who might be put at risk by the hazards listed above

  • The user is subject to 1, 2 and 3.
  • The space and all occupants are subject to 1.

Initial assessment of risk

Hazard identified Severity Probability Risk Factor (Severity x probability)
Fire 5 2 10
Burns 3 3 9
Electric Shock 3 2 6

Categorising the risk level as 1-4(Low), 5-9(Moderate), 10-15(High) or 16-25 (Unacceptable) shows that the potential level of risk in this activity is High. Further measures are needed/not needed to reduce the risk to an acceptable level.

Control measures

  • Necessary control measures arising from the hazard identified of Fire are:
    • Don't leave the machine running unattended.
    • Do not overheat the plastic material.
  • Necessary control measures arising from the hazard identified of Burns are:
    • Always use handles, do not touch the hood.
    • Always wait a couple of minutes before touching the plastic.
    • Never put your hand between the plastic and the heater elements.
  • Necessary control measures arising from the hazard identified of Electric Shock are:
    • Carry out a visual check and check the test date before use.

Final assessment of risk

The assessed risk taking into account the implementation of the control measures listed, and adherence to the SSOW (Safe System of Work) if applicable is as follows:

Hazard identified Severity Probability Risk Factor
Fire 1 1 1 (Low)
Burns 1 1 1 (Low)
Electric Shock 3 1 4 (Low)

When completing Risk Assessment please consider the if First Aid assistance might be appropriate if the calculated Risk level (Severity x Probability) is greater than 5

The risk now falls into the category LOW and is considered to be acceptable.

Authorised by

Sign:

Print:

Date: