Difference between revisions of "Equipment/Vinyl Cutter"

From Makespace
Jump to: navigation, search
(Summary)
Line 5: Line 5:
 
[[File:Craft_0020_Robo.jpg|thumb|right]]
 
[[File:Craft_0020_Robo.jpg|thumb|right]]
  
The CraftRobo vinyl cutter is being replaced by the new Silver Bullet. For information on the old cutter, please look here: [Equipment/Vinyl Cutter CraftRobo | CraftRobo]
+
The CraftRobo vinyl cutter is being replaced by the new Silver Bullet. For information on the old cutter, please look here: [[Equipment/Vinyl Cutter CraftRobo | CraftRobo]]
  
  
Line 12: Line 12:
 
The new Silver Bullet cutter is being commissioned by the Owners. For now, DO NOT USE!
 
The new Silver Bullet cutter is being commissioned by the Owners. For now, DO NOT USE!
  
The takslist for commissioning the equipment is here: [Equipment/Silver Bullet Commissioning]
+
The takslist for commissioning the equipment is here: [[Equipment/Silver Bullet Commissioning]]
  
 
= Using the Vinyl Cutter =
 
= Using the Vinyl Cutter =

Revision as of 19:49, 15 October 2014

Equipment / Vinyl Cutter

CraftRobo

Craft 0020 Robo.jpg

The CraftRobo vinyl cutter is being replaced by the new Silver Bullet. For information on the old cutter, please look here: CraftRobo


Summary

The new Silver Bullet cutter is being commissioned by the Owners. For now, DO NOT USE!

The takslist for commissioning the equipment is here: Equipment/Silver Bullet Commissioning

Using the Vinyl Cutter

Owners

The Owners are those nominally in charge of the equipment, organising its maintenance, helping others to use it, and generally being a point of contact.

The current Owners of the Vinyl Cutter are:

If you have any questions, problems or concerns around the vinyl cutter, or would like a personal introduction to how it all works, these are the people to contact.

Training

The fact sheet for the Vinyl Cutter can be found here: Fact Sheet

Health and Safety

The vinyl cutter is a potentially dangerous piece of equipment which must be operated with due care. The top things to always remember when using the vinyl cutter are:

  • ONLY USE THE VINYL CUTTER IF YOU HAVE READ THE SAFETY NOTES BELOW
  • NEVER LEAVE THE VINYL CUTTER RUNNING UNATTENDED
  • ONLY CUT APPROPRIATE MATERIAL

Safety Notes

  • SHARP BLADE - when handling the blade (eg. to adjust or change caps for different thickness) take care not to cut yourself
  • TRAPPING - The head and roller of the machine are moved by programs in the machine's memory. Be careful when near the machine, it will possibly move even if the PC is off. Always keep the cover closed when cutting

Instructions

TODO!