Difference between revisions of "Equipment/WarcoMill/Training"

From Makespace
Jump to: navigation, search
(Trained Users)
(removed Karpinski as not fully trained to level 0, added Jonny who is)
Line 34: Line 34:
 
| Stevan Wing || Intro || Use while supervised
 
| Stevan Wing || Intro || Use while supervised
 
|-
 
|-
| Robert Karpinski || Intro || Use while supervised
+
| Jonny Waite || Intro || Use while supervised
 
|}
 
|}
  

Revision as of 20:09, 5 November 2014

Training

THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.

Training and induction will start with a tour of the tool introducing all its parts. The following points will be covered.

  • Keep hands well away from the spinning parts.
  • Make sure there is no loose clothing or hair that can be caught in rotating parts.
  • Take care to mount the work securely.
  • Swarf has sharp edges so clean it away with a brush.
  • Some parts of the machine are very heavy. It is also possible to work on very heavy parts. Loosing control of heavy objects can cause serious injury. Plan work carefully. Using lifting aids if necessary. Ask for assistance if not totally confident of your ability to control the part at all times.

Owners

  • Roger Smith

Trainers

  • Mat Cook

Trained Users

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.


User Trained level Mill access
Diana Probst Intro Use while supervised
Stevan Wing Intro Use while supervised
Jonny Waite Intro Use while supervised

Trained operators

  • 1