Equipment/WarcoMill/Training

From Makespace
Revision as of 20:26, 13 January 2015 by DianaProbst (Talk | contribs)

Jump to: navigation, search

Training

THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.

Training and induction will start with a tour of the tool introducing all its parts. The following points will be covered.

  • Keep hands well away from the spinning parts.
  • Make sure there is no loose clothing or hair that can be caught in rotating parts.
  • Take care to mount the work securely.
  • Swarf has sharp edges so clean it away with a brush.
  • Some parts of the machine are very heavy. It is also possible to work on very heavy parts. Losing control of heavy objects can cause serious injury. Plan work carefully. Using lifting aids if necessary. Ask for assistance if not totally confident of your ability to control the part at all times.

Owners

  • Roger Smith

Trainers

  • Mat Cook

Trained Users

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.


User Trained level Mill access
Diana Probst Intro Use while supervised
Stevan Wing Intro Use while supervised
Jonathan Waite Intro Use while supervised
Matthew Taylor Initial Guide and Lesson A Continued teaching
Steve O* Initial Guide and Lessons A - C (conversion) Continued teaching
John Sturdy* Initial Guide and Lessons A - C Continued teaching
  • indicates user has read and signed safe use document