Equipment/WarcoMill/Training

From Makespace
Revision as of 22:43, 4 June 2015 by DianaProbst (Talk | contribs)

Jump to: navigation, search

Training

THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.

Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.

As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. Introduction to Machine Shop Tools and Skills


Owners

  • Mat Cook
  • Diana Probst
  • Roger Smith

Trainers

  • Mat Cook

Trained Users

Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.


User Trained level Mill access
Diana Probst Intro Use while supervised
Stevan Wing Intro Use while supervised
Jonathan Waite Initial Guide and Lesson A (revision) Use while supervised
Matthew Taylor Initial Guide and Lesson A Continued teaching
Steve O Initial Guide and Lessons A - C (conversion) Continued teaching
John Sturdy* Initial Guide and Lessons A - C Continued teaching
Robert Karpinski* Initial Guide Continued teaching
  • indicates user has read and signed safe use document