Equipment Status

From Makespace
Revision as of 18:25, 21 November 2014 by Posborn (Talk | contribs)

Jump to: navigation, search

Message of the day

Equipment status

Please be aware that this can only be a "best guess" as equipment may break at any time.

  • Red = not working
  • Orange = see notes
  • Green = fully working

All equipment requires induction training before you can use it, except the Vinyl Cutter and TShirt press for which training is available.

Device Status    Date Notes
LaserCutter 1   6 Nov 2014 Filters replaced. May need optical alignment but it's working fine.
LaserCutter 2   21 Nov 2014 Arrived?
CNC Router  
3D Printer  
Model Mill  
Bandsaw   Fine toothed blade only. No thick pieces.
Wood lathe   21 Nov 2014 Working, but usable by owners only, because we have no training course yet.
Metal lathe  
Warco Mill   Working, but usable by owners only. Training course is being written.
Vinyl Cutter   21 Nov 2014 Fixed by resetting baud rate on SB to 38400 - Paul
T-Shirt Heat Press   5 Nov 2014