Equipment Status
From Makespace
Equipment status
Please be aware that this can only be a "best guess" as equipment may break at any time.
- Red = not working
- Orange = see notes
- Green = fully working
All equipment requires induction training before you can use it, except the Vinyl Cutter and TShirt press for which training is available.
| Device | Status | Date | Notes |
|---|---|---|---|
| LaserCutter 1 - Betsy* | 6 Nov 2014 | Filters replaced. May need optical alignment but it's working fine. | |
| LaserCutter 2 - Jaws* | 20 Dec 2014 | Mirrors realigned. In beautiful working order. | |
| CNC Router* | |||
| 3D Printer* | |||
| Model Mill* | |||
| Bandsaw* | Fine toothed blade only. No thick pieces. | ||
| Wood lathe* | 21 Nov 2014 | Working, but usable by owners only, because we have no training course yet. | |
| Metal lathe* | |||
| Warco Mill* | Working, but usable by owners only. Training course is being written. | ||
| Vinyl Cutter++ | 21 Nov 2014 | Fixed by resetting baud rate on SB to 38400 - Paul | |
| T-Shirt Heat Press++ | 5 Nov 2014 |
Marked * = Red labelled equipment: you need to be inducted before use of this equipment.
Marked ++ = Orange labelled equipment: use with caution, but you do not need to be trained (you do need to be an inducted keyfob holding Makespace member)
