Equipment Status
From Makespace
Please be aware that this can only be a "best guess" as equipment may break at any time.
- Red = not working
- Orange = see notes
- Green = fully working
| Device | Status | Date | Notes |
|---|---|---|---|
| LaserCutter 1 - Betsy* | 31 Mar 2015 | :) | |
| LaserCutter 2 - Jaws* | 31 Mar 2015 | :) | |
| CNC Router* | |||
| Makerbot 3D Printer* | 23 Feb 2015 | Working, except RH extruder | |
| "Up" 3D Printer* | 07 Jan 2015 | Working with new control board (thinks it's a Rep-Rap) but needs documented toolchain | |
| Model Mill* | |||
| Bandsaw* | Fine toothed blade only. No thick pieces. | ||
| Belt/Disc Sander++ | 31 Mar 2015 | Bearing smashed. In discussion with Axminster re repair options. | |
| Wood lathe* | 21 Nov 2014 | Working, but usable by owners only, because we have no training course yet. | |
| Metal lathe* | |||
| Warco Mill* | 23 Dec 2014 | Working, but usable by owners only. Training course is being finalised | |
| Vinyl Cutter++ | 29 Mar 2015 | New PC installed, SW installed and activated, ready for use - Paul | |
| T-Shirt Heat Press++ | 5 Nov 2014 |
Marked * = Red labelled equipment: you need to be inducted before use of this equipment.
Marked ++ = Orange labelled equipment: use with caution, but you do not need to be trained (you do need to be an inducted keyfob holding Makespace member)
"Red category" equipment requires induction training before you can use it; "Orange category" items such as Vinyl Cutter and TShirt press may be used having read the manual, and training is available -- take advantage of it or ask for help if you are at all unsure. (Note: Categories should not be confused with equipment status in the table above)
