Equipment Status
From Makespace
Please be aware that this can only be a "best guess" as equipment may break at any time.
- Red = not working
- Orange = see notes
- Green = fully working
| Device | Status | Date | Notes |
|---|---|---|---|
| LaserCutter 1 - Betsy* | 05 Sep 2015 | Moderate angle to cut, about 1:10 gradient. | |
| LaserCutter 2 - Jaws* | 26 Mar 2016 | Lid microswitch fixed. | |
| CNC Router* | 09 Dec 2015 | Decommissioned due to losing steps and similar concerns. For full info and possible usage if you are a *very* experienced CNC user, see http://wiki.makespace.org/Equipment/CNC_Router | |
| Ultimaker 2 3D Printer* | 30 Jul 2015 | Currently approved for PLA and ABS only | |
| Ultimaker 2+ 3D Printer* | - | unknown status | |
| Makerbot 3D Printer* | 26 March 2016 | Decommissioned | |
| "Up" 3D Printer* | 26 March 2016 | Decommissioned? | |
| Model Mill* | |||
| Bandsaw* | Working as of 9th April. | ||
| Belt/Disc Sander++ | 16 April 2015 | Bearing replaced. Thanks Kim/Roger/Lee | |
| Wood lathe* | 21 Nov 2014 | Working, but usable by owners only, because we have no training course yet. | |
| Metal lathe* | |||
| Warco Mill* | 1 Oct 2015 | ||
| Vinyl Cutter++ | 29 Mar 2015 | New PC installed, SW installed and activated, ready for use - Paul | |
| T-Shirt Heat Press++ | 5 Nov 2014 | ||
| EZcube Light Tent | 1 Sep 2015 | Daylight bulbs missing, lampshades, tent and other parts available |
Marked * = Red labelled equipment: you need to be inducted before use of this equipment.
Marked ++ = Orange labelled equipment: use with caution, but you do not need to be trained (you do need to be an inducted keyfob holding Makespace member)
"Red category" equipment requires induction training before you can use it; "Orange category" items such as Vinyl Cutter and TShirt press may be used having read the manual, and training is available -- take advantage of it or ask for help if you are at all unsure. (Note: Categories should not be confused with equipment status in the table above)
