Family-Makers-Projects-List

From Makespace
Revision as of 17:36, 23 June 2013 by Rodw (Talk | contribs)

Jump to: navigation, search
Date Available? Topic Owner Deputy Meetup (y/n)
01/09/13
25/08/13
18/08/13
11/08/13
04/08/13
28/6/13 Steve
21/7/13
14/7/13 Steve, Brian Water Rockets Stephen Woolhead Brian Corteil
7/7/13
30/6/13 Hydraulic Judo Bots - This session on building mechanical robots with hydraulic controls, followed by a competition to find the most effective design. The robots will be built using experience gained in the projectile launchers session and also include bearings and hydraulic pistons. There are examples of designs and videos of example competitions at Instructables.

[ Photos from the day]

Rod
23/6/13 Projectile launchers - This session will involve building 2 different types of projectile launchers, cork disks and drinking straw darts. The launchers will be make of lolly pop sticks, wood blocks, rubber bands and copious amounts of hot glue, the designs are from Cork-Shooter and Slingshot-Dart-Shooter

[ Photos from the day]

Rod
16/6/13 Open day: bring your own project to work on + show & tell
9/6/13 Chain-reaction machine planning

Photos from the day

Brian
2/6/13 Arduino 101

This session started with the setup of the Arduino software on a laptop and then connection to an Arduino and downloading a simple sketch. The first sketch was a simple blink of the onboard LED. This then progressed to wiring in an external LED and a pair of LEDs, to reproduce the electronics 'flip-flop' from a few weeks ago. We then moved on to a traffic light sequence and for the more advanced decoding a numeric keypad and use of an ultrasonic distance sensor.
Photos from the day

Steve
26/5/13 Salt dough fun

Photos from the day

Beck
19/5/13 3D-modeling with cardboard and glue guns - This session is in two parts: the first, crafting with hand-cut corrugated cardboard to make hats, helmets and masks, the main points are shaping structure from flat sheets, reinforcement and ease of major modifications; the second, assembling a number of precut models, to show that a 3D model represented in a computer can be produced with different construction techniques, layered slices, radial slices. Finally, the attendees saw the laser cutter cutting one of the models, to show its just a quicker/more accurate scissiors.

Photos from the day

Rod
12/5/13 Basic electrical circuits - This week's challenge was to build a circuit that flashes two LEDs on and off. The children were provided with breadboards, resistors, capacitors, transistors, wires and battery packs. A circuit diagram was provided, but the children had to figure out how to map the circuit diagram to pins on the breadboard. Most families succeeded in the challenge though some of the younger children had fun just getting LEDs to light up in simpler circuits. One family went on to solder their circuit, make use of the soldering station available at Makespace while others connected their circuits to oscilloscopes.

Photos from the day

Nigel y
5/5/13 Paper cranes
Photos from the day
Chris y
21/4/13 Egg drop - The idea of this project is protect a raw egg from a 2 meter drop, with the supplied materials. The materials used were bubble wrap, card, paper, tape, plastic shopping bags and glue
Photos from the day
Brian y
14/4/13 Paper aeroplanes
Photos from the day
Steve y