Difference between revisions of "Form One Training Notes"

From Makespace
Jump to: navigation, search
(Form One Training Course notes)
(Training Notes)
 
(One intermediate revision by one user not shown)
Line 24: Line 24:
 
3. Loading resin
 
3. Loading resin
  
 +
* Inspect and/or comb tank (back left corner and material in resin).
 
* Topping up a tank
 
* Topping up a tank
 
* Loading a tank
 
* Loading a tank
  
 
4. Software / workflow
 
4. Software / workflow
 +
* Printer and resin selection & changing. (Use 0.2mm clear for 20 min demo print)
 
* Setting quality / speed trade off
 
* Setting quality / speed trade off
 
* Importing
 
* Importing
Line 60: Line 62:
 
* Tough
 
* Tough
 
* Avoid cross contamination
 
* Avoid cross contamination
 +
* Member supplied resins (+tray & plate).
 +
* Flexible is very difficult to use.
  
 
8. Resin pricing
 
8. Resin pricing
  
 
* Get volume from Preform
 
* Get volume from Preform
* 20p per ml
+
* 15p per ml except Tough which is 20p per ml
* Weigh failed prints
+
* Weigh failed prints (1g = 1ml)
 
* Pay for support structure too
 
* Pay for support structure too
  
 
9. Unloading resin
 
9. Unloading resin
  
* Combing tank
+
* Combing & inspecting tank
 
* Replace the lid
 
* Replace the lid
 
* Store in the right place
 
* Store in the right place
Line 81: Line 85:
 
* Post-curing
 
* Post-curing
 
* Support removal
 
* Support removal
 +
* Sanding and polishing
 +
 +
11. Other
 +
 +
* Unattended printing
 +
* Mention more trainers are always welcome
 +
* Email & google groups

Latest revision as of 23:10, 30 September 2016

Form One 3D Printer Training

This page documents the process for being trained on the Form One+ Printer.

Summary

The training introduction is suitable for 1-5 members at a time and takes about two hours. You will learn how to use the Form One safely without damaging either the printer or yourself.

Booking

For discussing and arranging slots, please use the mailing list. New training sessions will be announced on the Meetup group.

Notes:

  • You can only be trained if you have RSVP'd to a Meetup session

Training Notes

These notes are an aide-memoir for Form One trainers.

1. Ask what each member hopes to get out of the 3D printer.

2. Explain how SLA printing works

3. Loading resin

  • Inspect and/or comb tank (back left corner and material in resin).
  • Topping up a tank
  • Loading a tank

4. Software / workflow

  • Printer and resin selection & changing. (Use 0.2mm clear for 20 min demo print)
  • Setting quality / speed trade off
  • Importing
  • One click print
  • Importance of part orientation
  • Supports
  • Printing

PRINT TEST PIECE Continue up to (9) while printing is in progress

5. Safety

  • Ingestion
  • Skin irritation
  • Eye irritation
  • Fume inhalation
  • Fire
  • Injury from sharp tools
  • Electrocution

6. Damage to machine

  • Remove build plate before resin tray
  • Keep the lid shut

7. Types of resin

  • Clear, fast print mode
  • Grey
  • Black
  • Tough
  • Avoid cross contamination
  • Member supplied resins (+tray & plate).
  • Flexible is very difficult to use.

8. Resin pricing

  • Get volume from Preform
  • 15p per ml except Tough which is 20p per ml
  • Weigh failed prints (1g = 1ml)
  • Pay for support structure too

9. Unloading resin

  • Combing & inspecting tank
  • Replace the lid
  • Store in the right place
  • Replace the blank tank

10. Finishing

  • Removal from build plate
  • Cleaning
  • Post-curing
  • Support removal
  • Sanding and polishing

11. Other

  • Unattended printing
  • Mention more trainers are always welcome
  • Email & google groups