Difference between revisions of "Kit wishlist: basic infrastructure budget"

From Makespace
Jump to: navigation, search
Line 12: Line 12:
 
* http://www.welco.co.uk/small-part-storage-cabinet-550-x-310-gpr-936-008.html
 
* http://www.welco.co.uk/small-part-storage-cabinet-550-x-310-gpr-936-008.html
 
* Dymo labeller and tape
 
* Dymo labeller and tape
 +
* screfix 20mm blind grommets x25 or so (fill in duccting holes)
 
* coat pegs
 
* coat pegs
 
* Wifi webcams, for security and also for seeing who if anyone is in the space!  http://www.zoneminder.com/ can be used with these [http://www.amazon.co.uk/Foscam-FI8918W-Wireless-Camera-Viewing/dp/B0046710G6/ref=sr_1_1?s=computers&ie=UTF8&qid=1352573849&sr=1-1| cameras] 3x can cover most areas.
 
* Wifi webcams, for security and also for seeing who if anyone is in the space!  http://www.zoneminder.com/ can be used with these [http://www.amazon.co.uk/Foscam-FI8918W-Wireless-Camera-Viewing/dp/B0046710G6/ref=sr_1_1?s=computers&ie=UTF8&qid=1352573849&sr=1-1| cameras] 3x can cover most areas.

Revision as of 18:46, 13 November 2012

We have provisionally allocated an initial ~£1k each month till year end for infrastructure basics.

Big equipment/capex purchases are going to require us securing sponsorship, and cash is tight whilst a lot is going out for space setup (insurance, security, access, fire, lawyers etc) before we have all the grant so we're being a bit careful right now, but especially thanks to all the commitment of founder members, the cashflow looks ok for us to spend a bit now on basics.

So basically up to the commitiee how this £1k/month should be spent, but painting seems reasonable one.

We will be able to claim VAT back (with a VAT receipt!), but whilst cashflow is tight assume any cost are inc vat prices. There was general maillist concensus for storage box shelving (now ordered + built - came in at ~250 inc vat/delivery/couple of test boxes), and i'd request we budget for an industrial henry xtra hoover (~150) having spent the evening brushing up and wanting to ease and set a precedent on future cleanliness, but what else is up for discussion! I think i saw some provisional paint calculatons fly past, and seems in a ball park that could fit. Also some vices to bolt to some of the desks could be wise, but will let the planning meeting discuss what and how to allocate this money.

Requests for November

to do security motion detection based recording, etc. (note: do we want private or public or delayed feeds? Concerns have been raised by founders about public online photos already...)

  • rack for above & under coat pegs, for bike helmets, bags etc
  • Sheets of OSB/Plywood for general use including tool peg boards, benches, etc.
  • Selection of planed timber lengths, for general use
  • Wood work items - clamps, set square, ???
  • Basic set of power tools - Cordless drill with set of attachments (Makita is good!), jigsaw, circular saw, router, sander, ?
  • Mice for the computers in the store room
  • scaffold - similar to the one we hired but ours - for changing bulbs, painting, repair, hanging stuff off roof, etc. Cheaper and safer than commercial grade ladders? Or scaffold & small ladder?


What do we want in October?


  • Henry industrial xtra hoover (£150) - Donated, thanks!
  • Storage box shelving - Bought, £255
  • Vices for benchwork
  • Safety equipment - goggles/gloves/masks
  • Hammer / mallet
  • Set of decent screwdrivers
  • Box of Cat5/Cat6 cable (+ connectors, crimping tool?) - I have connectors and can lend crimp tool Danros 12:52, 24 October 2012 (BST)
  • Wired network switch(es) as necessary - we now have two netgear 8-port switches available
  • Good quality wifi access points (ddwrt compatible) (3) - currently have one adsl/wifi router
  • Henry hoover bags
  • Bin bags, cleaning products
  • A bin (General bin + Recycling bin)
    • Suggested use of old oil drums as cheap, large, strong bins. Could even weld castors on the bottom.
  • Couple of good quality brooms
  • More stools/chairs/benches for the main workshop
  • Planed timber and sheet materials (plywood/MDF) for benches, shelves, etc.
  • Sundries (Screws, bolts, rawlplugs, etc)
  • PAT Tester £27 this is an Portable Appliance Testing Adapter, needs an Insulation & Continuity Tester to work, and they start about £200 plus VAT. A basic PAT start from £175 + Vat
  • Paint (Walls of robolab 2 coats approx £60, Floor of robolab 2 coats approx £60 also)
  • A makespace stamp
  • Tea/Coffee/washing up facilities
  • A sink for the above in the heavy workshop - there is water+drainage already available, so no real alterations to do. Cheap wall mounted sink is about £40, but if anyone has a spare belfast sink...

October plan from Founders meeting 25-10-12 We ran through the various items and priced them to see how things look.

  • Storage boxes and rack, £250, already bought
  • Henry - donation received, many thanks!
  • materials for 1-2 workbenches £100
  • vice(s) £80
  • safety kit eg goggles £50
  • mallet £5
  • cat 5 cables - donations very likely :)
  • Henry bags - £10
  • bins (either oil drums or actual bins with self-closing lids; varied to cover recycling and waste separation options) £100
  • brooms - already have
  • paint rollers and long poles £70
  • misc screws, nails etc £100
  • storage - no further purchases this month
  • PAT tester - not this month
  • paint (floor and walls) £200 - £300
  • fridge £50
  • microwave Donation offered, many thanks!

As this all roughly adds up to £1000 the complete set of items here were agreed to be bought. Laura will coordinate the purchases. If you have any donations to offer against this list let her know asap!