Difference between revisions of "LaserCut53Notes (Laser Cutter Notes and FAQ)"
From Makespace
(Add problem and solution in changing engrave power) |
m (Fix formatting) |
||
| Line 1: | Line 1: | ||
| − | # Failure in "Download current" # | + | ##Failure in "Download current"## |
If it appears to talk to the laser, but "Download Current" does not work, it's because LaserCut cannot write to a couple of files in C:\ root. Temp workaround: run as admin. Full workaround: update permissions for these files. | If it appears to talk to the laser, but "Download Current" does not work, it's because LaserCut cannot write to a couple of files in C:\ root. Temp workaround: run as admin. Full workaround: update permissions for these files. | ||
| − | # Unable to change power of Engrave # | + | ##Unable to change power of Engrave## |
If you can change the speed in engrave mode and every other setting in cut mode, but not the power in engrave mode (e.g., it's stuck at 15), then change **both** the power and the speed, which unlocks the setting of power. | If you can change the speed in engrave mode and every other setting in cut mode, but not the power in engrave mode (e.g., it's stuck at 15), then change **both** the power and the speed, which unlocks the setting of power. | ||
Revision as of 20:37, 1 July 2018
- Failure in "Download current"##
If it appears to talk to the laser, but "Download Current" does not work, it's because LaserCut cannot write to a couple of files in C:\ root. Temp workaround: run as admin. Full workaround: update permissions for these files.
- Unable to change power of Engrave##
If you can change the speed in engrave mode and every other setting in cut mode, but not the power in engrave mode (e.g., it's stuck at 15), then change **both** the power and the speed, which unlocks the setting of power.
