LaserCut53Notes (Laser Cutter Notes and FAQ)

1. 1. Failure in "Download current"##

If it appears to talk to the laser, but "Download Current" does not work, it's because LaserCut cannot write to a couple of files in C:\ root. Temp workaround: run as admin. Full workaround: update permissions for these files.

1. 1. Unable to change power of Engrave##

If you can change the speed in engrave mode and every other setting in cut mode, but not the power in engrave mode (e.g., it's stuck at 15), then change **both** the power and the speed, which unlocks the setting of power.