Difference between revisions of "PCB milling"
| Line 16: | Line 16: | ||
Download the example Kicad project from FIXME, open "WS2812B_breakout.pro" using Kicad, and then open the PCB editor. You should be faced with a routed board, all ready to be exported. | Download the example Kicad project from FIXME, open "WS2812B_breakout.pro" using Kicad, and then open the PCB editor. You should be faced with a routed board, all ready to be exported. | ||
| − | [[Image:Initial_Kicad.png]] | + | [[Image:Initial_Kicad.png|The project on first opening in Kicad.]] |
| − | [[ | + | Click on the button "Offset adjust for drill and place files" in the bottom right (circled in the above image). Click on a point somewhere below and to the left of the components in the above image. This origin MUST be placed at least 2.54 mm below and left of all of the components, traces, board outline, etc (though not those blue dimension labels) otherwise CopperCAM will misalign the layers. |
| + | |||
| + | Click on File --> Plot. Set the "Plot Format" to "Gerber". Set the "Plot Origin" to "Auxiliary axis". Make sure the "Back" and "Front" layers are selected, and hit the "Plot button" in the lower right. This image below shows the export options I used - I do not know exactly which of these are crucial. | ||
| + | [[]] | ||
== Import into CopperCAM and milling setup == | == Import into CopperCAM and milling setup == | ||
Revision as of 11:20, 26 April 2014
This page is intended to contain instructions on milling PCBs using the Roland CNC Mill. It is still a work in progress.
- The Roland CNC Mill is class red equipment - you MUST NOT use it without specific training.
- The Roland's communal milling bits will be easily damaged by copper and fiberglass - do NOT use the communal milling bits! I will leave a tin of specific PCB milling bits near the machine, clearly labelled as such.
The toolchain described on this page is as follows:
- Design the PCB in Kicad, export to Gerber and Excellon drill files.
- Import the Gerber and Excellon files into CopperCAM.
- Set up appropriate tool choices in CopperCAM, and export these directly the Roland's printer driver.
It should be easy to substitute Kicad for Eagle in the above. I am using Kicad purely because that is what I am familiar with.
CopperCAM is a very temperamental piece of software as regards importing Gerbers and drill files. Most of this page will be devoted to managing its eccentricities. It does, however, seem to output instructions that the Roland mill understands, with some restrictions that will be discussed below.
Export from Kicad
Download the example Kicad project from FIXME, open "WS2812B_breakout.pro" using Kicad, and then open the PCB editor. You should be faced with a routed board, all ready to be exported.
Click on the button "Offset adjust for drill and place files" in the bottom right (circled in the above image). Click on a point somewhere below and to the left of the components in the above image. This origin MUST be placed at least 2.54 mm below and left of all of the components, traces, board outline, etc (though not those blue dimension labels) otherwise CopperCAM will misalign the layers.
Click on File --> Plot. Set the "Plot Format" to "Gerber". Set the "Plot Origin" to "Auxiliary axis". Make sure the "Back" and "Front" layers are selected, and hit the "Plot button" in the lower right. This image below shows the export options I used - I do not know exactly which of these are crucial. [[]]
