Difference between revisions of "Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven"
From Makespace
(Created page with "Okay ish setting s for 125micron mylar: 400mm/s 42% rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads. ToDo seperate page for stencils/SM...") |
(No difference)
|
Revision as of 22:40, 4 August 2015
Okay ish setting s for 125micron mylar: 400mm/s 42% rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.
ToDo seperate page for stencils/SMD HowTo