Difference between revisions of "Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven"

From Makespace
Jump to: navigation, search
 
(One intermediate revision by one user not shown)
Line 4: Line 4:
  
 
42%
 
42%
 +
 +
0.1mm over scan
  
 
rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.
 
rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.
Line 20: Line 22:
  
 
--[[User:Pinski1|Pinski1]] ([[User talk:Pinski1|talk]]) 18:37, 5 August 2015 (BST)
 
--[[User:Pinski1|Pinski1]] ([[User talk:Pinski1|talk]]) 18:37, 5 August 2015 (BST)
 +
 +
CUSF's myarl stencils are cut with:
 +
 +
500mm/s
 +
 +
50%
 +
 +
0.05mm over scan
 +
 +
and rotate stencil 45°
 +
 +
--[[User:Pinski1|Pinski1]] ([[User talk:Pinski1|talk]]) 23:41, 5 August 2015 (BST)
 +
 +
The parts list for the add on/upgrade PCB is: https://dl.dropboxusercontent.com/u/3638084/ThermocoupleParts-Sorted.xls

Latest revision as of 20:12, 9 February 2017

Okay ish setting s for 125micron mylar:

400mm/s

42%

0.1mm over scan

rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.

Try reducing the cut, still some webs blew through.


ToDo seperate page for stencils/SMD HowTo

--Pinski1 (talk) 22:40, 4 August 2015 (BST)


Using a ULP in eagle to export top and botom cream layers as poly-lines in a DXF.

script: https://github.com/SWITCHSCIENCE/ssci-eagle-public/blob/master/cream-dxf.ulp

--Pinski1 (talk) 18:37, 5 August 2015 (BST)

CUSF's myarl stencils are cut with:

500mm/s

50%

0.05mm over scan

and rotate stencil 45°

--Pinski1 (talk) 23:41, 5 August 2015 (BST)

The parts list for the add on/upgrade PCB is: https://dl.dropboxusercontent.com/u/3638084/ThermocoupleParts-Sorted.xls