Difference between revisions of "Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven"
From Makespace
| Line 8: | Line 8: | ||
Try reducing the cut, still some webs blew through. | Try reducing the cut, still some webs blew through. | ||
| − | |||
| Line 14: | Line 13: | ||
--[[User:Pinski1|Pinski1]] ([[User talk:Pinski1|talk]]) 22:40, 4 August 2015 (BST) | --[[User:Pinski1|Pinski1]] ([[User talk:Pinski1|talk]]) 22:40, 4 August 2015 (BST) | ||
| + | |||
| + | |||
| + | Using a ULP in eagle to export top and botom cream layers as poly-lines in a DXF. | ||
| + | |||
| + | script: https://github.com/SWITCHSCIENCE/ssci-eagle-public/blob/master/cream-dxf.ulp | ||
| + | |||
| + | --[[User:Pinski1|Pinski1]] ([[User talk:Pinski1|talk]]) 18:37, 5 August 2015 (BST) | ||
Revision as of 18:37, 5 August 2015
Okay ish setting s for 125micron mylar:
400mm/s
42%
rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.
Try reducing the cut, still some webs blew through.
ToDo seperate page for stencils/SMD HowTo
--Pinski1 (talk) 22:40, 4 August 2015 (BST)
Using a ULP in eagle to export top and botom cream layers as poly-lines in a DXF.
script: https://github.com/SWITCHSCIENCE/ssci-eagle-public/blob/master/cream-dxf.ulp
