Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven

From Makespace
Jump to: navigation, search

Okay ish setting s for 125micron mylar:



rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.

Try reducing the cut, still some webs blew through.

ToDo seperate page for stencils/SMD HowTo

--Pinski1 (talk) 22:40, 4 August 2015 (BST)

Using a ULP in eagle to export top and botom cream layers as poly-lines in a DXF.


--Pinski1 (talk) 18:37, 5 August 2015 (BST)