Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven
Okay ish setting s for 125micron mylar:
0.1mm over scan
rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.
Try reducing the cut, still some webs blew through.
ToDo seperate page for stencils/SMD HowTo
Using a ULP in eagle to export top and botom cream layers as poly-lines in a DXF.
CUSF's myarl stencils are cut with:
0.05mm over scan
and rotate stencil 45°