Talk:Equipment/Electronics Workbenches/T-962A Reflow Oven

From Makespace
< Talk:Equipment
Revision as of 20:12, 9 February 2017 by Pinski1 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Okay ish setting s for 125micron mylar:

400mm/s

42%

0.1mm over scan

rotate stencil 45° - cutting at 0° or 90° blows out the webs between pads.

Try reducing the cut, still some webs blew through.


ToDo seperate page for stencils/SMD HowTo

--Pinski1 (talk) 22:40, 4 August 2015 (BST)


Using a ULP in eagle to export top and botom cream layers as poly-lines in a DXF.

script: https://github.com/SWITCHSCIENCE/ssci-eagle-public/blob/master/cream-dxf.ulp

--Pinski1 (talk) 18:37, 5 August 2015 (BST)

CUSF's myarl stencils are cut with:

500mm/s

50%

0.05mm over scan

and rotate stencil 45°

--Pinski1 (talk) 23:41, 5 August 2015 (BST)

The parts list for the add on/upgrade PCB is: https://dl.dropboxusercontent.com/u/3638084/ThermocoupleParts-Sorted.xls