Difference between revisions of "Shiny New LatheMillStuff"
From Makespace
(reformat, add belts) |
DianaProbst (Talk | contribs) |
||
Line 6: | Line 6: | ||
**Drill Chuck Type : Key - B16 3-16mm £25.53 | **Drill Chuck Type : Key - B16 3-16mm £25.53 | ||
**Arbor Type : 3MT B16 £5.11 | **Arbor Type : 3MT B16 £5.11 | ||
− | **Belts for mill (can't find on their site, but they must do them) | + | **Belts for mill (can't find on their site, but they must do them) [Roger says use a reputable name. He is unimpressed by the current ones. DP] |
**Direct collets: | **Direct collets: | ||
***http://www.warco.co.uk/Collets/267-3mt-direct-collets.html | ***http://www.warco.co.uk/Collets/267-3mt-direct-collets.html |
Revision as of 02:01, 6 November 2014
From here: [1]
- Mill
- Slideway Lubricant Oil £6.90
- Edge Finder £7.50
- Drill Chuck Type : Key - B16 3-16mm £25.53
- Arbor Type : 3MT B16 £5.11
- Belts for mill (can't find on their site, but they must do them) [Roger says use a reputable name. He is unimpressed by the current ones. DP]
- Direct collets:
- http://www.warco.co.uk/Collets/267-3mt-direct-collets.html
- To fit a few standard sizes: 5mm, 10mm to fit 2mm,4mm centre drills
- Lathe
- Live / Revolving Centres to fit lathe 2MT £23.49
- New dead centre
- Misc
- Weighing scale for the honesty box.
- Second metal "overflow" honesty box to live in office
- New paintbrushes to clean up
- green tape for it.