Difference between revisions of "Equipment/ToolClasses"

From Makespace
Jump to: navigation, search
(YELLOW)
(Looks like you can't redirect automatically to an external link)
 
(11 intermediate revisions by 6 users not shown)
Line 1: Line 1:
[[Equipment|Equipment]] / Tool Classes
+
Information on tool classes has been moved to [https://web.makespace.org/training/ the main website]
 
+
= Tool Classes =
+
 
+
All tools in Makespace are classified into the following three classes.  The tools will be marked with coloured stickers, tags or spray painted.
+
 
+
Before using a tool, be sure to identify what class the device is in.
+
 
+
== RED ==
+
High risk of personal injury or moderate or higher risk of damage to equipment from untrained use.
+
 
+
'''Training Mandatory.'''
+
 
+
This category are devices where there is a high risk the operator will do more damage to themselves than can be fixed with a band aid or that the equipment represents a high barrier to entry that will result in equipment damage if used by an untrained operator.
+
 
+
The device is '''NOT TO BE USED''' unless you have been through and passed the training plan for the device.
+
 
+
== YELLOW ==
+
Low to moderate risk of personal injury -
+
 
+
''Training optional but you must read the wiki page for the device before use.''
+
 
+
These are the types of devices that most Makespace members will likely already be familiar with and have used at some point; Jigsaws, power drills and soldering irons being examples. If a member is unsure as to the use of a device, then structured training will available.  Members can be ‘asked’ to attend training if they are seen to be struggling, but the expectation is people will know their limits and be responsible and ask for help.
+
 
+
== GREEN ==
+
Negligible Risk
+
 
+
No formal safety training offered.
+
 
+
Devices that represent low to no risk; If you need help with one of these just grab the nearest member and ask.
+
 
+
Devices not marked are assumed to be in the green class.
+

Latest revision as of 08:28, 6 May 2023

Information on tool classes has been moved to the main website