Difference between revisions of "Shiny New LatheMillStuff"
From Makespace
DianaProbst (Talk | contribs) |
|||
| Line 2: | Line 2: | ||
*Mill | *Mill | ||
| − | ** | + | **Slitting saw stuff (approx £50-60 including a few blades) |
| − | + | ||
| − | + | ||
| − | + | ||
**Belts for mill (can't find on their site, but they must do them) [Roger says use a reputable name. He is unimpressed by the current ones. brammer has them at c. £5-£8 as catalogue items. DP] | **Belts for mill (can't find on their site, but they must do them) [Roger says use a reputable name. He is unimpressed by the current ones. brammer has them at c. £5-£8 as catalogue items. DP] | ||
| − | ** | + | |
| − | *** | + | |
| − | ** | + | *Mill |
| + | **got! Slideway Lubricant Oil £6.90 | ||
| + | **got! Edge Finder £7.50 | ||
| + | **got! Drill Chuck Type : Key - B16 3-16mm £25.53 | ||
| + | **got! Arbor Type : 3MT B16 £5.11 | ||
| + | **got! Direct collets [3,5,8,10mm] | ||
*Lathe | *Lathe | ||
| − | **Live / Revolving Centres to fit lathe 2MT £23.49 | + | **got! Live / Revolving Centres to fit lathe 2MT £23.49 |
| − | **New dead centre | + | **got! New dead centre |
*Misc | *Misc | ||
Revision as of 00:07, 17 November 2014
From here: [1]
- Mill
- Slitting saw stuff (approx £50-60 including a few blades)
- Belts for mill (can't find on their site, but they must do them) [Roger says use a reputable name. He is unimpressed by the current ones. brammer has them at c. £5-£8 as catalogue items. DP]
- Mill
- got! Slideway Lubricant Oil £6.90
- got! Edge Finder £7.50
- got! Drill Chuck Type : Key - B16 3-16mm £25.53
- got! Arbor Type : 3MT B16 £5.11
- got! Direct collets [3,5,8,10mm]
- Lathe
- got! Live / Revolving Centres to fit lathe 2MT £23.49
- got! New dead centre
- Misc
- Weighing scale for the honesty box.
- Second metal "overflow" honesty box to live in office
- New paintbrushes to clean up
- green tape for it.
